Officejet 7410 All-in-One photo printing thin white lines

I haven't had this problem before.
First, I had 2 thin white lines near the left edge of the paper -- 1st, 1 1/4 inches from left edge;  2d, 2 1/2 inches from left edge.  I cleaned the cartridges automatically. 
Then, I had only one thin white line, 1 1/4 inches from left edge.  I am loathe to try the automatic cleaning again because I'm using a LOT of color ink on this photo.
I need to know whether it will help to: 1) clean automatically again,
                                                            2) clean the cartridges by hand with filtered water, or
                                                            3) is there some other solution? (What is it?)
kaylaesq

Are the lines across the short length of the paper or the long length?  ("Left" side means different things if you are printing in portrait or landscape.)
If the lines are along the long axis of the paper it may be caused by aerosol fogging of the encoder strip.  In this case you could clean the encoder strip as described in this post.  Do not clean the encoder if the lines run across the page in the short direction (the way the printhead moves).  If you do need to clean the encoder heed the warnings, the encoder is fragile and can be damaged by rough handling or aggressive cleaning.
Bob Headrick,  HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Similar Messages

  • HP Officejet 7410 All-in-One no longer 'automatically' print double sided

    After upgrading my PC from Windows XP 32-bit to Windows 7 64-bit my HP Officejet 7410 All-in-One printer no longer prints double-sided automatically.  When sending something to print I am presented with only two options: Print One-Sided or Manually Print on Both Sides.  If I choose the latter I have to manually reload the paper when prompted.  I have tried searching for updates and downloading drivers but nothing  has resolved the problem.  I've even gone into printer properties printing shortcuts and changed the settings in "Print on Both Sides" to 'automatically' and still I am prompted to reload the paper.  It is a real pain when I have to print a very large slide pack especially when the printer decides to pick up two sheets at the same time.  I have spoken to HP and they say my printer is old and they cannot help me.  It is about 8-10 years old.  Any advice would be gratefully received. 

    Hello Toosweet
    In Printer Preferences make sure the duplexer is enabled. Do you have the full feature software installed?
    Don't forgot to say thanks by giving "Kudos" to those that help solve your problems.
    When a solution is found please mark the post that solves your issue.

  • HP Officejet 7410 All-In-One Doesn't work after installing Snow Leopard

    installed Snow Leopard yesterday ....my HP 7410 printer doesn't work properly ....take a look at the response the HP Service Center gave me:
    +Hello Charles,+
    +Thank you for contacting HP Total Care.+
    +I understand from your email that you want the 'HP Officejet 7410 All-in-One Printer' software driver for 'MAC OS X 10.6'.+
    +I appreciate for the opportunity to assist you.+
    +*Charles, I regret to inform you that the unit does not support the operating system. I recommend you change the OS to Microsoft Windows to avail the unit software driver.*+
    +I will be more than happy to assist you when you change the OS.+
    +For information on keeping your HP and Compaq products up and running, please visit our Web site+
    at:
    +http://www.hp.com/go/totalcare+
    Sincerely,
    Sentinaro
    +HP Total Care+
    +Our advice is strictly limited to the question(s) asked and is based on the information provided to us. HP does not assume any responsibility or liability for the advice given and shall not be liable for any direct, indirect, special, incidental or consequential damages in connection with the use of this information. Always back upyour data.+
    +For more information, including technical information updates, please visit our Web site at http://www.hp.com/support.+
    +HP does not require you to send any financial data in your reply to this email. As a prudent reminder, do not insert credit card details or other financial information in any e-mail replies.+

    Help! I've spent hours researching this and can't find a solution...
    I upgraded 3 Intel Macs in the house to Snow Leopard last weekend. All went differently...but all were successful. I found that the connection to my HP Officejet 7410 (connected wirelessly to 802.11g Airport Express (AEX) network) was "broken". Deleted then "re-intalled". Documents could now be printed. I then found out scan function was "broken". Figured out how to scan with new Snow Leopard "baked-in" driver and Scan tab...different, but it worked.
    Then, tonight, on the eve of my birthday, I was given the green light to purchase an Airport Extreme 802.11n (dual-band) base station (AEBS). I set it up and got 2.5X speed on the two 802.11n laptops in the household. Glorious! Then I went to work to ensure print and scan functions were still operational. Tried to re-connect HP OJ 7410 to wireless network...when it found the network it asked for the "WEP" key (on previous AEX network I was secured utilizing WPA2/Personal)...I entered the WPA2/Personal password (same as previous network) and got the error message "Key must be 5 or 13 characters OR 10 or 26 length with 0-9 and A-F (hex)". So I turned off the wireless radio and instead plugged the 7410 into the AEBS via USB. Deleted the previous queue and re-installed. Found the printer no problem but now without the Scan tab or function anywhere...despite following all the recommendations found both on the HP site and here in the Apple Forums. I print fine. Can't for the life of me figure out what the problem with the now lost again Scan function is.
    Only strangeness I can think of is the following: When setting up the network(s), I had the option of naming the 5 ghz band something different. I set mine up with the same name of the 2.4 ghz network with 5ghz in parenthesis (i.e. BobbyG and BobbyG (5 Ghz)).
    Sorry for the long post but we need the scan function in the house for my wife's teaching purposes. Any assistance would be GREATLY appreciated.
    Very Respectfully,
    Bobby G.

  • Uninstalling the drivers and programs for Windows 7 SP1 64 bit of the OfficeJet 7410 All-In-One

    Hi
    Which utility should be used to properly and completely uninstall the drivers and programs for Windows 7 SP1 64 bit installed with the OfficeJet 7410 All-In-One printer?
    Thanks
    Bye
    balubeto

    Hi @balubeto 
    I located a software removal utility for you but if you have other HP printers or scanners you may perform the more basica uninstall.
    Software and Driver Removal Utility
    Uninstalling the Printer Software (more basic uninstall)
    I hope this resolves your inquiry.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • I cannot get my HP officejet 4215 all-in-one to print graphics

    how do i get my HP officejet 4215 all-in-one to print graphics. as an example if i print my visa statement the visa logo and bank logos don,t print

    bamajim,
    Here is a link to a page for your printer that may help with your issue.
    The document provides steps to troubleshoot printouts that do not match the screen while printing from the web.
    Does this also happen when printing graphics from somewhere other than the web ?
    Once you give these steps a try let us know what happens.
    If I helped you at all it would be great if you clicked the blue kudos star!
    If I solved your post please mark it as solved to help others.
    I'm a printer tech with HP.

  • How do you set a Canon Pixma MP280 All-in-One Photo Printer , to mirror image for shirt transfers ?

    How do you set a Canon Pixma MP280 All-in-One Photo Printer , to mirror image for shirt transfers ?  Im really having  hard time so any help needed . 

    Hello. When printing on T-Shirt Transfer media, please change the Media Type setting to T-Shirt Transfer before printing.  This can be specified in the print menu of your software. If you need assistance with locating the Media Type options, please tell us what version of Windows or Mac OSX is on your computer. This didn't answer your question or issue? Find more help at Contact Us.  

  • HP OfficeJet 5505 All-In-One wireless printing.

    I've got a problem getting a HP OfficeJet 5505 All-In-One printer working with a Time Capsule for wireless printing.. I'm not quite sure how to debug this, so I'm asking for a little help.
    If I connect the printer directly to the Mac, It is properly recognized when I go to add it into the printers list, and documents print normally.
    Now when connected to the TimeCapsule, It looks to be recognized in the Airport Utility, and when I go to add it into the printers list, I can see it connected to the Time Capsule.. One difference is that I have to manually choose the printer driver rather than it being auto selected..
    When I print a document, it looks like it spools up normally, and gets sent to the printer.. However the printer never starts, or prints.
    After reading a few posts it looks like there might be some compatibility issue between office jet printers and the Time Capsule/Airport Extreme as I am not the only one with issues.
    Any ideas?

    The OfficeJet 5505 uses LIDIL (lightweight imaging device interface language) which depends on the host computer for low level commands. It will not work with the Time Capsule's USB port.
    Technically, neither the printer nor the TC is at fault. The printer will only work when connected directly to a computer's USB port. Searching for drivers will be a futile exercise.
    Sorry for the bad news. If you want to get a printer on your network, get a network printer.

  • HP 7510 all-in-One Photo Printer

    I have a All-in-One 7510 Photo Printer that the paper extender flip attheend broke off.  I tried to glue but to no avail.  This is a necessary coponent because if you print more than 1 page they will shoot out on the floor.  Does anyone Know if a replacement part can be purchased?  I have had no luck on the internet looking for this part.

    Hi DebraLynn,
    From your description, it sounds like the output tray is broken. I suggest you go to Partsurfer.hp.com, choose your country or region in the upper right corner, and enter CQ724-60031 in the Quick Search.
    Your search result will find the ASSY_Photo Tray. The output tray is the photo tray. If you have any difficulty, the alternate option is to call HP and have them order it for you. The number to call HP is 1-800-474-6836 for Canada and US, or you can Contact HP Worldwide.
    I hope this resolves your inquiry!
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • HP Officejet 5610 All-in-One not printing true colours

    The HP help people have finally given up on trying to make my Mac see the Color Options tab in their print software with my set-up. They now say, "It's an Apple problem". If I could see these settings I'd be able to adjust the HP defaults for print-outs (by saturation, brightness, density, hue, contrast, etc) once and for all so I'd get closer to what I see on screen printed out in front of me. Without them I have to change everything on a trial and error basis each time in Photoshop. I've read about it in the HP manual and seen it work on another (cheaper) HP printer on a similar Intel iMac but with the All-in-One I just get the screen saying "No User Selectable Settings" - which HP say should not be the case. Anyone have any ideas? This screen seems to be vital - unless of course there's a better way of synchronising the perfect image I see on screen with what I get out of this printer?

    I have seen this case with hp printers on the intel macs as went the intel macs came out hp's driver release was set for June as that is when the intel macs were suppose to be released i know the new software version 7.9 which is universal fixes all of these issues on the intel based macs.
    Just make sure you run the hp uninstaller first HD/Applications/Hewlett Packard
    Here is the link for the lates driver
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?lc=en&cc=us&dlc=en&os=2 19&product=441125&lang=en&softwareitem=mp-40934-1

  • My computer states HP officejet 7410 all in one no device found

    went to hp driver, did a find hp, on hp website, did the download for product, HP solution center on desk when I click it pop up says No Hp devices have been detected HP solution center will close now ok  In control panel under scanner and printer folder it has 1 icon HP officejet 7400 series with a green check and Ready next to it. Not only am I trying to get computer to work with solution center am trying to make wireless Can anyone help?

    Hello there! Welcome to the forums @CFHPhilly ,
    I read about the issues you're having with installing your Officejet 7410. Could you check the instructions in the guide below to ensure you have set up the printer the way the guide recommends? If not, please try out those steps and if you run into any issues, let me know what they are exactly and also which operating system you are running on your computer.
    Installing the Printer Software on a Wireless or Wired (Ethernet) Network
    Best wishes
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • HP Officejet 4620 All in One Not Printing Black-BRAND new cartridge

    Hello everyone, I am hoping SOMEONE can help me, as this has taken up hours of time and resulted in plenty of frusteration. I just replaced my black ink cartridge, and not a single drop of black ink will print. I have  genuine cartridges, and cleaned the print heads, both steps one and two, atleast twice each. In the meantime I have since used up all my color ink, which is still working. But black does not show up AT ALL. Sure, I could buy more color cartridges and use them to print black, but at this point, I do not want to put any more money into this printer if it's not going to work properly. I am desperate for an solution! I run a small business from home and I NEED my printer. My warranty expired a few months ago and am really hoping I don't have to pay for phone support. 
    Does anyone have any advice on how to get black to print properly?? PLEASE AND THANK YOU!!! 
    This question was solved.
    View Solution.

    I suggest you call HP support regardless of warranty as described in the post here.  If you are in the US call 1-800-HPINVENt, elsewhere see the contact information here.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Officejet J5750 All in One Not Printing

    The printer has now stopped all together, just flashes lights. Tried the printer tool box. Printed a beautiful diagnostic page, but got the stoppage and flashing lights on the test page. Turned off and on and got a replace cartridge message. Did that. Got the allignment message. Will not allign, goes to flashing lights. Off and on will not clear it because everytime it comes back on it tries to allign and it won't.

    The document here may help resolve black not printing on your Officejet 4620. Be sure to check the vents, if they are blocked the printer will appear to be running out of ink early in the cartridge life.
    If the troubleshooting steps there do not resolve the issue I sould suggest you contact HP, 1-800-HPINVENt if you are in the US or see the document here for elsewhere.  They may be able to help resolve the issue even if the printer is not in warranty as described in this post.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Officejet 6500 All in one Cannot print to Fax on Mx OSX Mavericks

    Im on a new Mac running OSX Maverics.  I'm new to mac.  On my old windows computer, I could print to fax with this same printer.  I would choose the OcciceJet 6500 Fax as my printer and fax any document from my screen.  Now on the Mac I cannot do this.  I dont see that as an option anywhere.  
    In my printer choices (when I click File>Print) I only see OfficeJet6500 E709a.  On my windows computer i will see "OfficeJet6500 E709a" and "OfficeJet6500 E709a Fax" .  
    Can I print from my screen on a mac like I do on windows?  What am i doing wrong?  
    Ive seen other people write things about sending a fax being a choice in the PDF dropdown but i dont see it there either.
    Ive run all software updates I can find.  I have the latest version of Mavericks. 
    Any help would be greatly appreciated.  
    Thanks!
    Daniel

    Hi
    Can you try this.
    Download this HP SW driver from HP.com
    http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4142&lc=en&cc=us&dlc=en&sw_lang=&product=4083...
    This is a mountain lion installer, currently there's no support for Mavericks. Just downlaod this.
    After you ahve downloaded, install the sw.
    When you reach the page below, try to check everything.
    Whne you reach this page,select the "Bonjour Multifunction" and in Use: select the the HP Officejet ******. Dont select AirPrint. You should see the HP Fax during this page. If dontsee the Fax, just wait for a while maybe 2mins. Update me if you dont. And continue the installation.
    After the installation, click "System Preferences" in the dock. Select Printers & Scanners, on this page you should see the Printers and Faxes of your printer.
    Please try it out and update me the outcome.

  • Photosmart C5250 All-In-One photos print dark

    My photos appear bright on screen but when printed out, are always darker.  Any answers?

    What operating system?  What color management settings?  Is your monitor calibrated?  What program are you using to print?  What are the print settings?  Are you doing color management in both the application and the printer driver?  (Should do one or the other, not both).
    Regards,
    Bob Headrick, Microsoft MVP Printing/Imaging
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • How to get our HP Officejet 7310 All-in-One to print using the network option

    The network printing initially stopped working on Win XP. I now use Win 7 Enterprise. 
    I have uninstalled the printer from my PC, restarted the machine, went through the add new printer device wizard and still no network printing capability. 
    I currently use the workaround of the USB connection for printing from one PC. 

    Have you tried running the Network Diagnostics tool to see if your printer is on the network.
    The tool is Here
    www.hp.com/go/tools
    JonW
    I work for HP

Maybe you are looking for

  • Upgrading to Camera Raw 6.7 fails.

    I am using Photoshop CS5 on Macbook Air running Yosemite 10.10.2. My problem is that upgrading to Camera Raw 6.7 fails. I can download it successfully but then the Adobe window says (rather uninformatively): " There was an error downloading this upda

  • Split Valuation Error during GRN Creation

    Hi, I am getting an error 'Material 2000750015 F419 not subject to split valuation' while posting GRN. Actually, the Valuation Category was bymistakely updated in this material earlier. The same was later removed from the material & then a new line i

  • Data block size

    I have just started reading the concepts and I got to know that Oracle database data is stored in data blocks. The standard block size is specified by DB_BLOCK_SIZE init parameter. Additionally we can specify upto 5 other block sizes using DB_nK_CACH

  • How do I update to Gingerbread

    My fascinate never got the push for the update.  Now, its no longer available or at least my phone doesn't detect it. One Verizon rep said my signal and reception would be improved if I updated because I am having trouble accessing the towers and get

  • Xcelsius Preview errors

    Hi, Recentley I have downloaded Xcelsius SP4 and found an issues/bug with exporting dashboards to Infoview. I was unable to. Then we posted this issue to SAP. While they are working on it I did uninstall the SP4 so now I am on SP3. But when I click o