Officejet Pro 8100 will not connect wirelessly to my main PC

Was able to connect the printer to the wireless network and will print for a wireless laptop but am not able to select this printer by my main PC. When asking it to add a new printer it finds the 8100 but freezes at that point and will not connect. I have reloaded the driver software but the software also freezes when trying to locate the printer.

Hello wsw1,
Welcome to the HP Forums! I understand the software keeps freezing when "Locating the Printer".
What is your operating system on this computer? Windows or Mac?
Try installing this software over a USB connection. Please follow this HP document on Installing Printers Software over a USB Connection. Choose your correct operating system.
This will be a test, to verify if the software is able to successfully install without freezing. (Make sure you leave the USB cord out of the computer until it prompts you to connect.)
If you get this software installed on your computer, then try Convert from a USB connected printer to wireless.
Looking forward to hearing from you.
I worked on behalf of HP.

Similar Messages

HP OfficeJet Pro 8600 Will Not Print Wirelessly

Hi. I have read other threads on this forum with suggested fixes from HP employees and tried them. I have run the tool which found no errors. My firewall is off. I have installed the latest Adobe and uninstalled then reinstalled the printer software. I have followed instructions in book re: turning off computer, router, printer, etc. I can see the IP address for the printer in IE.
Still, this brand new printer will not print wirelessly or otherwise from my hp laptop. VERY frustrating. I have spent hours trying work arounds for a brand new computer. I would greatly appreciate a response regarding how to resolve this problem. Thank you.

I have seen cases where a troubled install went through flawlessly after the computer was reimaged. That may be an option to consider.
I did want to make sure that you had the most current firmware version and it looks like you do.
Before a reimage, you could uninstall Officejet Pro 8600 programs (if there are any) and download and install the drivers for your printer from hp.com. Click here for the HP Officejet Pro Full Feature Software and Driver. By doing this, you would have the most up-to-date drivers. Sometimes a download will work where a disk does not. It you do decide to reimage, I highly recommend the above download for the installation.
Let me know what happens.
Also, remember a click on the Kudos star to the left is a quick "Thanks" for a helpful post.
Please select the "Accept as Solution" button on the post that best answers your question.
I appreciate your input ! ___________________________________ _____
Thank You,
Rich
Expert

Officejet pro 8600 will not connect to wireless network

I have an new Officejet Pro 8600 that I am trying to set up. I have run the the wireless network setup wizard multiple times. It recognizes the wireless network router asks for the WEP code and then thinks for about 5 minutes before returning a message: "Unable to connect to the network"
The wireless network test results suggestes that MAC address filtering may be the problem. There is no MAC filtering function activated on our wireless router.
The wireless router is a Verizon Actiontec MI424-WR 802.11 b & n
We have computers running both Windows XP and MAC OS X.
One of the reasons that we purchased this printer is for the wireless capabilities. If it will not conect to the web then it may be going back.

Hello,
Based on the provided details, I believe the issue have something to do with the wireless security settings of your router.
Please follow the steps below to access the Advanced Security Settings:
http://www22.verizon.com/ResidentialHelp/FiOSInternet/Networking/Setup/ActiontecMI424/125511.htm
Below you will see the Network Authentication settings.
Select either Open System Authentication or Both.
Shared Key Authentication is not supported by the printer, and i believe this might be the cause for the connection failure.
Please let me know of any change,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

HP officejet Pro 8100 will print from an Iphone but not from my windows laptop

HP officejet Pro 8100 will print from an Iphone but not from my windows laptop. I get an error stating "unable to communicate with printer"

Hi Melatina66,
Welcome to the HP Support forums. I understand that when trying to print from your laptop that you get a communication error message.
To better assist you, would you please provide some further information:
1)       How is the printer connected (USB cable, ethernet or wireless)?
2)      When you installed the printer on your laptop did you set it up with a USB cable? If yes, did you switch the connection type on the laptop from USB cable to ethernet/wireless?
3)      What version of Windows operating system are you running on the laptop (Windows XP, Windows Vista, Windows 7, or Windows 8, etc)?
4)      When printing from your iPhone are you using Apple's AirPrint or HP's ePrint app?
Thank you.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

My MacBook Pro persistently will not connect to my wireless router. The message "connection timeout" appears. What is a connection timeout and how can I fix?

My MacBook Pro persistently will not connect to my MiFi Verizon wireless router. The message "connection timeout" appears. What is a connection timeout and how can I fix?

Hi there terri900!
You may want to try configuring your router settings to match the recommended settings for iOS and OS X devices, which can be found here:
iOS and OS X: Recommended settings for Wi-Fi routers and access points
http://support.apple.com/kb/ht4199
You may also find some helpful information for troubleshooting this issue in this article, which can help you with any manner of issues with Wi-Fi connections:
Wi-Fi Quick Assist
http://support.apple.com/kb/HT1145
Take care, and thanks for visiting the Apple Support Communities.
-Braden

My IPOD and Macbook Pro both will not connect to the Itunes store through Itunes says no internet connection, but I can connect through safari and I have a internet connection

My IPOD and Macbook Pro both will not connect to the Itunes store through Itunes says no internet connection, but I can connect through safari and I have a internet connection

As I mentioned above, I am not very tech savvy so I have no idea why a wireless protocol would be showing up there, I'm just listing everything I see in hopes that someone might know something I can try. This is why I am asking for help here - I'm not sure what has happened that has made me unable to connect, especially since it seemingly occured while nobody was using the computer.
I guess I should clarify that I'm not a total hillbilly- normally my firewall is set to 'on', but I set it to 'off' to try and troubleshoot the issues here as I was told that sometimes it can interfere with the computer's ability to connect to the internet. If this is not the case and firewall does not affect anything, I will turn it back on while I try to fix this.
I have tried the method you mentioned above a few times - I actually contacted my ISP earlier this week and they recommended resetting the router like that. They didn't mention any known network issues.

HP Officejet Pro 8625 - Will not acknowledge incoming fax while in sleep mode

HP Officejet Pro 8625 - Will not acknowledge incoming fax while in sleep mode. The sender receives an error "no answer".
When I call the fax number, if I touch the screen it will wake up immediately to receive the fax.
Printing from the computer while in sleep mode works fine.
Please advise. Im missing important faxes and can only set sleep mode to a maximum of 15 mins, so I have an alarm set to touch my machine every 15 mins. sigh...
Thank you,

Hi Willia,
Welcome to the HP Support Forums! I see when your HP Officejet Pro 8625 enters sleep mode, you are unable to receive any incoming faxes. The senders will receive a 'no answer' error. I understand your printer will wake up from sleep mode if you send a print job.
First let's go ahead and make sure the OJ 8625 is plugged directly into a wall outlet, using a power bar or surge protector can cause the printer to lose basic functionality over time. To get a better understanding take a look here: Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector
Now, I would like you to update your printers Firmware, click on the link below and follow the on screen instructions:
HP Officejet Pro 8620/8625 Firmware Update
Are you now able to receive incoming faxes when the OJ 8625 is in sleep mode? If not, I would like you to contact our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
http://www.hp.com/cgi-bin/hpsupport/index.pl
I hope this helps!
Thanks,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Out of no where, will not connect wirelessly.

I just purchased a Windows 8 pc. However, I take such good care of my techie things I still have an old Toshiba laptop about 8 years old, maybe a little less that runs just great, it's just the technolgy was getting a little behind. It's the old style "tablet" that has the swivel screen and was considered "heavy" accord to our standards today.
The Toshiba Satellite (circa 2005) laptop is an XP with all the updates and service packs. I keep it lean and clean with Advanced System Care, have for months with no problem. It was always used to connect wirelessly.
About the middle of February I switced from Verizon slow DSL to Comcast because we have no other choice for a faster speed. No FIOS. But, I've come back a full 180 to Verizon. However I did get a new modem, the latest advances. It's a D-Link ADSL2+ (DSL2750B) Supposed to run 3 to 6 times faster than the old Verizon modem I had. When I first connected to the DSL I turned this laptop on, connected wirelessly and it was there great going! I was even hitting almost the top speed I am provisioned for wireless. The modem is only 2 feet away but still. I turned if off, turned my attention back to the new Windows 8 machine for a day couple of days
Then I wanted to go back and check the Toshiba XP and revel in it's great performance on this new modem .... drat!! It detects all local stations, even of course mine, but when I try to connect it tries but fails and jumps to a neighbors DSL. I can however connect with the Ethernet cord.
I've been using this Toshiba Tablet for months with a USB wireless adapter just fine that a friend gave me. In fact either the internal wireless adapter and the USB worked with not a problem but tests seemed to show his gift of the adapter was a little faster, so I use it exclusively.
So neither wireless adapter, internal or USB will connect to my modem. I even tried pressing the WPS button on the modem, the one that's lets someone near log on without a password.
So there it is. Can anyone have a clue why this worked at the first and now won't? Also, all other pc's, including a netbook with XP and a new small android tablet are connecting no problem. It's the Toshiba laptop alone that for some reason ...
out of no where, will not connect wirelessly. Is there an easy fix than uninstalling drivers? But why would both adapters get a corrupted driver at the same time? I hope there is help here. Thanks so much for reading this and consdering my situation. Jack ":-D

Since the computer can connect with the neighbor's router, I don't think there is a problem with wireless connection on the computer. So it has to be some configuration or settings problem with the new modem. I would check the encryption of the new modem. If the computer can see the modem, but not connect, my thinking is that the encryption is blocking the connection. Temporarily disable the encryption on the new modem and see if that makes a difference. If it doesn't, you may want to check the advanced settings on the modem and compare the IP settings on the computers that work versus the one that doesn't.

Paper drawer on Officejet Pro 8600 will not close

The paper drawer on the printer will not close. It goes in approximately one inch and is blocked by something at that point even though I cannot see or feel anything strange.

Hi @connied46,
Welcome to the HP Forums!
I noticed that the paper drawer on Officejet Pro 8600 will not close. I am sorry to hear this, but happy to help!
Please see this post, Re: Officejet Pro 8600 Plus ...paper TRAY wont close all the way? By my colleague @Gemini02.
If the post does not help, please call our phone support at 800-474-6836 to get your printer serviced. If you live outside the US/Canada Region, please click the link below to get the support number for your region. Country-language selector.
Best of luck!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

I updated my IPAD 2 to ios 7 and now it will not connect wirelessly or recognize my blue tooth devices

I updated my IPAD2 to ios 7 and now it will not connect wirelessly or recognize my blue tooth devices

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Fix WiFi Issue for iOS 7
http://ipadnerds.com/fix-wifi-issue-ios-7/
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
10 Ways to Boost Your Wireless Signal
http://www.pcmag.com/article2/0,2817,2372811,00.asp
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Keith Gilabert "HP Laserjet Pro 200 MFP will not connect wirelessly"

Hi.
Laserjet HP Pro 200 will not allow me to have a wireless connection direct to the printer when I have the network cable plugged in.
Please advise.
Thank you,
Keith Gilabert
Keith Gilabert

Hello @KeithGilabert
You may only use the network cable (Ethernet) or Wireless as the connection to your computer(s). Both of the connections together cannot co-exist, unlike USB and Wireless, which is possible.
Installing the Printer Software on a Wireless or Wired (Ethernet) Network
Wishing you a wonderful Monday
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Officejet Pro 8500A unable to connect wirelessly to Ubee Modem/Router

I recently upgraded to a new "all in one" Ubee Modem Router (Model DDW366) and have spent hours attempting to wirelessly (both using Wizard and entering info by hand) print, but nothing has worked. The only way I am able to print at this time is by printer cable connected to my MacBook Pro. I'm unable to print wirelessly from my MacBook Pro, iPhone and iPad.
HP will not advise me on how to solve this problem as printer is no longer under warranty and Cox Cable who sold me the Modem/Router combo are not willing to assist with this problem.
Can anyone advise me on how to print wirelessly again?

Hello @drlogan0,
Welcome to the HP forums.
I understand that you are encountering problems with getting your Officejet pro 8500A onto your new wireless network.
I would like to help.
i would try restoring the network defaults. This will help erase any 'old' information that may be stuck in the printers memory. I would like to give you specific steps for this, but I am unsure if you have the 8500A, 8500A wireless, or the 8500A premium.
Basically the steps are, go into the network menu, and select restore network defaults.
If you have tried restoring the network defaults already, please review the following troubleshooting documents.
Setting Up the Printer for a Wired or Wireless Network for the HP Officejet Pro 8500A
Printer Does Not Maintain Wireless Connection
Aardvark1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

Officejet pro 8100 does not print pages in "back to front" sequence

officejet pro 8100: I cant make it print pages in the sequence last page to first page even tho I have set the default printer preferences to "print back to front" AND I have specified "back to front" for the particular print job.
I am using this 8100 as a WIRELESS printer.
Yesterday it worked OK.:
I did NOT turn the printer off over night.
Today it will only print in first-to-last-page sequence.
I have tried the following:
turned printer off; and then on.
rebooted windows 8.1.
rebooted the router.
confirmed that it WILL print in first-to-last-page sequence for each test.
My test document has 4 pages.

Hi John , I hope you had a good weekend!
I just want to verify:
When you print an 8 page document FRONT TO BACK page 1 comes out on top.
When you print an 8 page document BACK TO FRONT page 8 comes out on top.
Is that correct?
Thanks!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

HP C4740 will not connect wirelessly to HP desktop

I have an old HP desktop (prob Pavillion) running Win XP Pro w/ SP 3. I have 2 MB RAM. I purchased an HP C4740 AIO printer about 6 months ago. At first it hooked up fine and performed very well in wireless mode. Then when replacing an ink cartridge one of the retainer tabs broke. Long story short I had to replace the unit. HP gladly did so and I got a brand new one.
When I got the new one I hooked it up and installed the software exactly per the instructions for use as a wireless printer. Unfortunately, no matter what I do it will not connect to my wireless network. The only way to use this printer is via USB cable. Two things happen that I find interesting: it does not recognize the printer (even thought it's connected by USB cable) and it doesn't recognize my wireless network (even though it does recognize another unknown network). Even when I try to manually enter my network SSID and Passphrase it will not recognize it. I have also tried unsecuring the network but still no success.
The network is secured but I have the SSID and passphrase information. For reference, I have a Dell laptop and Lexmark printer that connect without issue. My iPhone 4 connects without issue. This C4740 will not. I have uninstalled the software and even gone into the registery to locate and remove any entries associated with this printer. Still nothing works in wireless mode.
Need help. I am by no means a computer expert, especially with networking. I know enough to be dangerous but still make it through the day! I'm ready to toss this and pay the much higher price for the much more usable Lexmark! Only problem is I'm just cheap enough that I'm willing to try to make this printer work.
Thanks!

Hi,
Download the latest installer software for your printer on the link below and save it to the Desktop.
ftp://ftp.hp.com/pub/softlib/software11/COL28119/mp-71555-3/PS_AIO_06_C4700_USW_Full_Win_enu_140_175...
Next download and install Revo Uninstaller from the link below.
http://www.revouninstaller.com/download-freeware-version.php
Disconnect your printer from your PC.
Run revo and use it to uninstall your printer software. Right click on the icon of the program you wish to remove and select Uninstall. During the process you may be asked to delete registry entries, just select all and then click delete. Do the same for any left over files and folders. Once the uninstall has completed, reboot the PC.
Temporarily disable any security software ( Antivirus and Antispyware )
Now try running the software installer from your Desktop by double clicking the installer. Do not connect the printer to the PC until the software asks ( Whether wired or wirelessly ). If everything install Ok, remember to enable your security software.
Hope this helps.
Best wishes,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

HP Officejet 8500A Plus will not connect to router.

A couple month ago I had this printer up and running on my network fine. I use a Cradlepoint MBR1200B router with a Verizon wireless aircard. We took the printer out of the office while we were remodeling, we went to go back and hook it up after the remodel was complete. Now it will not connect back to our router. It's weird the printer will connect fine to my other verizon hotspot, but not the cradlepoint router with usb modem. We have an Officejet 6500 upstairs that is connected to the cradlepoint and is working great.
I have tried what seems like everything from resetting the network setttings on the printer to default and tweaking the security on the cradlepoint from WPA2 to WPA/WPA2. Still nothing.
Also when I choose to print a test report after getting the error on the printer it prints out a sheet that says.
"More that one access poiint/wireless rougter has been foun that mathes your wireless network name (SSID). IF this is not inteded, your HP printer may connect to the wrong wireless network. If you cahne your network name you will need to configure the SSID on all wireless devices to match you new newwork SSID."
The only wireless network we have in the house is the cradlepoint router???? We have the hotspot too, but that is not even turned on. Even so the SSID's for them are not even remoteley similar.

Hello Fost325,
Take a look at this document, which provides wireless and network troubleshooting scenario's. Please let me know if this helps.
Good luck!
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Officejet Pro 8100 will not connect wirelessly to my main PC

Similar Messages

Maybe you are looking for