OfficeJet Pro 8600 Plus fried by thunderstorm - how can I removed ink cartridges

A thunderstorm last week fried the power supply of my OfficeJet Pro 8600 Plus. The printer is beyond economical repair so I have ordered a new printer.
With no power, the ink cartridge carriage is stuck in the far right position where it is impossible to remove the four relatively new ink cartridges. Ink is not cheap ... would like to be able to salvage the ink cartridges from the disabled printer but cannot figure out how to release the carriage.
Any sugguestions would be appreciated.
This question was solved.
View Solution.

Hello ,
Welcome back to the HP Support Forums!
Sorry to hear about the Officejet 8600 taking that kind of damage in a storm. Regarding the inks not being accessible, the only thing I can think is to reference the carriage jam support guide.
A 'Carriage Jam' Message Displays on the Printer Control Panel
The only thing I can really offer as a suggestion is try manually moving the carriage over. If it is locked into position and are unable to move the carriage, if you fell comfortable, use a screw driver to "assist" the carriage to move. Since the printer is damaged and you are already planning / have replaced it, it wont hurt it.
Cheers,
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Similar Messages

My printer HP Officejet pro 8600 plus makes a lot of noise while printing

My HP officejet pro 8600 plus, makes a lot of noise while printing, ink levels are ok, and printing is ok. it was makiing lines before but not anymore

Hi,
Check first if the printer is connected directly to a wall outlet.
Check if the carriage is moving freely and there is no obstructions inside the unit.
Clean the paper rollers once.
See if doing these helps you
Thanks
I am an HP employee, these posts are according to my knowledge and HP is not responsible for it.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as Accepted Solution
I work for HP.

How do I get the HP OfficeJet Pro 8600 Plus to print only black or grayscale? What is the procedure?

How do I set my HP OfficeJet Pro 8600 Plus to print only black or grayscale? What is the procedure?

Hi, Looks like you have to do this from the aplications. Here is the procedure from its manual, page #36: 1. Load paper in the tray. For more information, see Load media.
2. On the File menu in your software application, click Print.
3. Make sure the printer you want to use is selected.
4. To change settings, click the button that opens the Properties dialog box. Depending on your software application, this button might be called Properties, Options, Printer Setup, Printer, or Preferences.
5. Change the paper orientation on the Layout tab, and paper source, media type, paper size, and quality settings on the Paper/Quality tab. To print in black and
white, click the Advanced button, and then change the Print in Grayscale option.
6. Click OK.
7. Click Print or OK to begin printing Regards.

How or where do I find the printer year? HP OfficeJet Pro 8600 Plus

How can I get the printer year for the HP OfficeJet Pro 8600 Plus? I have looked in printer staus report and the various labels I can find on the printer itself. I'm sure I'm just missing it.I bought it new, so I do not have any reason to think the information was removed prior to purchase. Thanks

The printer status report has in line 47 the date (rounded to the week) the printhead was installed. Except in the rare case the printhead has been replaced this would correspond to the date the printer was installed.

How do I attach a wireless scanner (HP OfficeJet Pro 8600 Plus) to Acrobat XI Pro?

How do I attach a wireless scanner (HP OfficeJet Pro 8600 Plus) to Acrobat XI Pro?

The printer status report has in line 47 the date (rounded to the week) the printhead was installed. Except in the rare case the printhead has been replaced this would correspond to the date the printer was installed.

How do I print 4x6 photos on an HP Officejet Pro 8600 Plus via Windows Photo Viewer or Gallery

Dear Experts, I've got an HP Officejet Pro 8600 printer with just one paper tray in which I loaded 4x6 photo paper.
The printer was purchased in January 2014, the latest drivers are installed. Now I would like to print a single 4x6 photo using Windows Photo Viewer or Gallery.I loaded the 4x6 photo paper into the tray as indicated by the little icon labeled 4x6in, so I suppose I got the HW part right. It's just the SW part which gives me a hard time. The available paper size options in Windows Photo Viewer and Gallerydon't include photo paper sizes, just the standard paper and envelope sizes.Hence I checked in the HP Printer Assistant in "Set Preferences" what kind of paper sizes are available, and there is exactly the same list as proposed by Gallery, missing photo paper sizes. So I guess Gallery just picks the sizes from the driver and ther are no photo paper sizes. This is an issue because I prefer to print from my PC using Win 7 or Win 8 and not from a SD card or a USB stick. Any help is very welcome, thank you in advance!

Thank you for this link! Actually I installed a brand new Windows 8 system in January 2014 and then bought the HP Officejet Pro 8600 Plus printer a few days later. To install this printer I did not use the CD that came with it but already used this link. Just to be sure that I have the latest version I again reinstalled the driver. The result is definitive: You cannot print common photo paper sizes like 4x6, 5x7, 8x10, etc. via a PC using photo SW like HP Photo Creations, MS Gallery, Windows Photo Viewer or any other SW on a HP Officejet Pro 8600 Plus. The reason is most likely that HP marketing decided that an Officejet should not be smart enough for photos, after all the company sells also Photosmarts. Because you cannot create your own formats you are limited by the driver to what is typically available in an office, in this case: A4, Letter, legal, Statement, Executive, A4, A5, A6, B54 (JIS), Envelopes #10-DL-C5-C6-A2-Monarch, Japanese Postcard, Japanese Envelope Chou #3-#4, L, 2L, O**bleep**u hagaki, Index Card Letter-A4, Edge-to-Edge Letter-A4, Env. Japanese No 3-No 4 and that's it, not more. Thank you anyway for trying to help me but in this case only the SW developers in HP can help.It would be great to be able to print from time to time a 4x6 photo on this printer like I would do.Copying photos on a USB stick or on a SD card first and then use this way to print on the printer is too cumbersome for me.

Officejet Pro 8600 Plus

Hello.
I have the Officejet Pro 8600 Plus running on Windows 7. The printer is connected to computer by network and it is linked to the computer.
All was well with the printer untill I removed Norton and installed McAfee two days ago. Now it will not work, even with McAfee turned off.
I tried to uninstall and re install the printers programmes and driver, but it will not re install the programme or driver.
I have uninstalled all HP prog's.
Stopped all start up prog's except the Microsoft ones.
Turned off McAfee
Gone to HP and re installed the software and drivers.
These downloaded fine (took a few minutes and 123.00 MB copied) and installed.
Accepted HP licence terms and ran printer installation programme.
Got instalation complete message.
But it is not installing! Where is it downloading the programme and driver to?
Downloaded the HP Print and Scan Doctor. This finds printer and says programmes not installed. it then downloads them, but it never works. Even with McAfee firewall and scanning all turned off. If I then run it again, I get the same mesasage the programmes not installed, though it just seemed to do it....
If I go to devices / printers there is no Officejet Pro icon like there was. If I try install new printer there, I does not find the correct drivers for this HP model.
If I go to Start, all Programmes, HP and click on these icons I get message "Shortcut moved or changed"
I am at whits end with this now. Absolutly hate the McAfee.
Please help. Nick
PS.
I have got the printer partly working by using the windows available driver HP Officejet Pro K8600 Series, but this is not the correct driver. It will not scan and has very limited printing functionality.
Windows also shows a FAX - HP Officejet Pro 8600 driver, but this did not work when I tried it. Is this the proper driver for this printer??
When I try to get windows to download new drivers it goes looking but says it is unavailable and to try again later. :-(

Hey there @Nick-S!
Thank you for posting on the HP Forums!
I can see that you are experiencing some software issues with the Officejet Pro 8600 after re-installing McAfee. I would be happy to provide some suggestions that may help resolve the issue!
I suggest restoring the network defaults in the printer, power cycling the router and reconfiguring the printer on the wireless network. To restore the network defaults press the Wi-Fi icon on the printer and go into settings. Under settings should be an option to restore the network defaults. Once the network defaults in the printer have been restored power cycle the printer and power cycle the router for 20 seconds. When the printer turns back on press the Wi-Fi icon again, go back into settings and run the wireless setup wizard.
I understand you have re-installed the software but the printer is still not recognised. I recommend uninstalling the HP software one more time. After the uninstall is complete it would be a good idea to perform a disk cleanup in the computer. A disk cleanup will improve computer performance and clear temporary files that may cause issues during the install of software. Once the disk cleanup is complete you should restart the computer and re-install the HP software.
To uninstall HP software click here: Uninstalling HP Software
To perform a disk cleanup click here: Performing a Disk Cleanup
To download the HP software click here: HP Officejet 8600 Plus Software and Driver
Please post back and let me know how that goes!
Cbert
I work on behalf of HP.
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" at the bottom of this post to say “Thanks” for helping!

Macbook Pro running Maverick doesn't recognize Officejet Pro 8600 Plus as a scanner

I am a new user to the Macbook, transitioning from Windows. I started with a preexisting Offciejet Pro 8500 but couldn't get it to work and discovered there were no Maverick drivers. I then bought and installed the Officejet Pro 8600 Plus wirelessly. I downloaded the HP software package for Mac. I can print. I can scan from the printer to the computer. I can use the HP Scan utility (although the HP apps folder also contains the 8500 apps and I'm not sure which is which). However, under System Preferences Printers and Scanners it only lists the 8600 as a printer and faxer; it does not appear under Scanner. And I cannot access it using PDF Converter for Mac, either. And it refuses to scan an entire legal page, stopping at the letter page limits, whether I use the document feeder or just place it on the glass.
( I also cannot figure out how to set up Network scanning - it asks for a folder address and I am not familiar with iOS nomenclature.)

Hi lahrm
I understand you are having issues scanning on the Maverick.
I will be happy to assist you with this.
I have included a document for how to scan on the Maverick.
I have provided a document for connection issues.
This document provides directions for scanning to a network folder.
If you need more assistance just let me know.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

WiFi Wireless Setup Wizard produces Blue Screen of Death on Officejet Pro 8600 Plus

The wireless setup wizard on my Officejet Pro 8600 Plus is failing immediately after "scanning for networks". I get a blue screen of death with error message B8494B00, followed by "turn printer on and off" with flashing screen.
I bought the printer about one month ago and it has worked perfectly so far. My Apple Time Capsule failed yesterday, so I bought a new one (latest model) and had to set up the wireless network again. When I tried to do so on the printer, I got the error for the first time. Nothing else had changed. Other devices are working with no problems on the new network. The computer is an Apple iMac running OS Mountain Lion.
I have tried turning the printer on and off, disconnecting the power and reconnecting, then turning it on again, but no result. I have restored the wireless to factory settings, but no difference.
Please help.

Right off I have to tell you I do not "speak Mac".
I assume the "Apple Time Capsule" is a name for a network router? A syncing device?
Unless I am mistaken:
You do not need the Wizard to set up the network -- it is pretty software for an HP PC; when it works, it can make things easier. The setup Wizard is not necessary for the process. I should think this is true for the Mac.
=====================================================================================
If you cannot get someone from the Printing group to answer your specific concern,
you may have succes with the following:
The User Guide has pretty good detail on how to set up the networking necessary to get the printer connected to either a PC or Mac environment. Assuming you can get the printer to "Reset network settings" (User Guide, page 222), then you can re-enter the information you require manually. It is a bit tedious, but is may work better than fighting the Wizard.
OfficeJet Pro 8600 User Guide
You may be able to circumvent sone or all of this by reinstalling the Full Feature Software for your printer -- that assumes you are first able to "reset network settings", at least, and get a printout test page to verify that the reset actually worked.
Select your printer from HP Office Jet 8600 series
Mac – By Garland_M
HP Wireless Printer Setup (Tutorial Video)
Mac
YouTube Search - HP printer install for mac
Good Luck!
<<< Click on the White Kudos Star on the Left to say Thanks!
Clicking “Accept as Solution" helps others find this fix for a same or similar issue >>>
2013 Year of the Snake!
Kind Regards,
Dragon-Fur

Unable to Completely Scan Legal Size Documents with Officejet Pro 8600 Plus

I am trying scan legal sized documents on my new Officejet Pro 8600 Plus. I have reviewed the forums, and this has been a recurring problem in the past (see link--- http://h30434.www3.hp.com/t5/Scanning-Faxing-and-Copying/Scanning-Legal-Size-Documents/m-p/35416#M14... ), but does not appear to be resolved. Whether I use the document feeder or the glass, the document is cut off at the bottom, and appears to be stopping at the 'A4' size, vs. legal. I cannot locate any setting on the scanner itself, or in the HP Utility software to change this, or even to be able to identify the current setting, if it is one.
I am using a Mac Pro, system 10.6.8, just installed and started using the printer a couple of days ago, and everything is up to date software-wise. Everything else on this machine has been working beautifully.
Can anyone identify what's going on here and how to correct it?
Thanks for your help--I specifically chose this particular unit over the next model down due to the legal sized glass/bed, and if I can't use it to scan legal docs, well, that's a problem. Thanks for your help!
This question was solved.
View Solution.

Hello,
Please try the following steps:
1. Open the HP Utility and select your device.
2. From Scan Settings open the "Scan to Computer".
3. Click the "Scan Tasks" tab.
4. Select the Scan Shortcut used to scan, then click Edit.
5. In the section of Scan from an HP Device click on the blue triangle to enlarge the menu.
6. From the enlarged menu now open the drop-down menu next to Crop To and set as None.
7. Click OK and try scanning again.
Please let me know of any change,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Printing wirelessly on officejet pro 8600 plus

I have recently purchased an e printer (Officejet pro 8600 plus). I have set it up on my laptop as well as mobile phone. I have printed photos from my phone, emails from my phone, emails from my laptop, word documents and excel documents from my laptop. It will only print sometimes. I think it may have to do with the printer going to sleep. On my mobile phone, I get a message saying ePrint job delayed because the printer is turned OFF or not connected to Internet. Well, it is on. When I actually go to the room where the printer is located, if I touch the screen and press Apps, sometimes, the printer says "connection error", unable to connect to the server. Other times when I have done this, it does make the connection. It seems that if I wake up the printer, I can eventually get something to print. But that defeats my purpose of the wireless capability. Can you help?

I will need some more information in order to help out. What make and model of router do you have? Does it ever fail regular wireless jobs sent from the computer to the printer? Or is it just ePrint jobs that it fails/delays? Also what is the IP address for the printer?
I am a former employee of HP...
How do I give Kudos?| How do I mark a post as Solved?

HP Officejet Pro 8600 Plus (All-in-One) - Incoming Fax but mistakenly answer phone

I have landline phone service. On this line, I have multiple phones, an answering machine, internet service via wireless Uverse setup, and the HP Officejet Pro 8600 Plus as a fax. It's also a printer/scanner - but that uses the wireless Uverse service.
The unit works as a phone, if I answer in fewer than 4 rings. The answer machine picks up after 4 rings. If a fax, the fax connects after 6 rings. (Auto answer function is turned on.) This works.
If I mistakenly answer a fax call with the phone that the HP 8600 is connected through, I can press: 1,2,3 and the fax will answer. This works.
Problem: If I mistakenly answer a fax call from one of the other phones in the house (same phone line is ringing as before - but the phone is NOT the one through which the HP 8600 is connected) - 1,2,3, does NOT work. If I rush to the HP 8600: pressing the "fax" button on the unit does not connect the fax call; nor does the HP 8600 give me the option to "Accept" the call, when the phone as been answered.
Does anyone know what buttons to push to get the fax to connect when the phone line is answered at a phone? Either at the answered phone OR if I can get to the HP 8600 when I hear the fax tone - buttons I can push on the HP 8600 to get it to respond to the fax tones coming in on the line?
Thanks to anyone who can help.

Hello Vandy73,
I see that this is your first visit with us here on the HP Forums. Let me please take a moment to say "Welcome".
I hope you enjoy your experience!
To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I see that you have some concerns when it comes to answering a fax call by accident from another phone. Pressing the 1.2.3 on the fax is the proper way to remedy the issue when you answer from the fax, however this feature will not work from another phone.
I do realize that this is an inconvenience. The only resolution would be to contact the sender of the fax and have them resend.
Thank you for your time.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

PDF from Google Apps gmail/gdrive by Cloudprinter failed on HP Officejet Pro 8600 Plus e-All-in-One

Dear forum contributors,
1. HP Officejet Pro 8600 Plus e-All-in-One
2. Linux OpenSuSE 12.2 64-bit
3. Failed , after the failed message is a very long URL to my gmail attachment.
4. This issue occured from the beginning, I have this printer only for one week.
When I print different kinds of PDF's from Google Apps (gmail and gdrive) by Google Cloudprinter I got a failed message at the HP eprinter Recent Print Jobs list.
Other prints from Google Cloudprinter, for example a webpage or a Google Docs document (not PDF) is working fine.
Also sending the same PDF's directly to my @hpeprinter.com e-mail address is working fine.
Is this a problem by Google Cloudprinter or HP e-print? How to solve the problem?
Thanks for helping,
Jurjen

After much research, I was unable to obtain a direct answer for two reasons: HP doesn't support Linux or Cloud Print beyond initial setup. I was not very satisfied with this answer as I knew you would not really be either so I found some links and this may be the last I can provide any assistance here due to the two reasons above. These links cover everything and should provide for you additional links to all of your questions I believe.
--Serving a Printer to Google Cloud Print from Linux--
--Google Cloud Print on Linux--
--Installing Google Cloud Print on a Linux Server--
Otherwise, if ePrint is not working within the apps using a Windows-based computer I am more than happy to assist you. You may continue to get support here from other community members regarding Linux but I may not be of much assistance. I can say the first place to check is www.eprintcenter.com and see what the error messages say there under the print history, cancel any pending print jobs and try again. Keep me posted on any additional information you may want to add regarding a Windows PC, otherwise I should direct you over to some great support provided by Google Cloud. Linux is suppose to work with these functions so I will leave you with this final excerpt from a Cloud Print Help site:
"Why is my document not printing?
1. Make sure your Google Cloud Print connector is running on a computer with Mac, Windows, or Linux.
2. If you're using Windows XP, make sure you also have the Windows XP Service Pack 3 (SP3) installed.
3. Confirm that the computer connected to your printer is powered on and that you are logged in."
This printer should support this feature so to make sure, you can log into www.eprintcenter.com and select ePrint Settings under the customized email address on this page and ensure you have Print Services ON. I wish I could be of more assistance however. I strongly recommend contacting the manufacturer of the apps you are having the problem with as these functions work when you use them like ePrint was intended (via email and mobile devices). Good Luck!
Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
When a solution is found please mark the post that solves your issue.
Every problem has a solution!

Officejet pro 8600 plus e-all-in-one color managment problem.

please help, I'm a photographer and I own officejet pro 8600 plus e-all-in-one printer. I want to print my photos using this printer, but it never print them right, so I bought Colormunki photo to calibrate my monitor and my printer and match them together. The problem is I can't control the printer color management !!! I want to disable it, so I can use the printer profile in Photoshop or other applications to get the right prints. my prints are darker when I set the color management to be handled by the application, or I make the printer handle it but I will end up with wrong colors. I really really need to change the profile of the printer. how ?????? otherwise I really have no use of it in my work.

Jassim,
Kudos to you for figuring out how to better control the outcome for what you require.
I have learned something new today. Smiling!
Did you create the new profile manually or add it in from a previously saved setting? Filename / filetype?
It has been a while since I used Photoshop. I am thinking I may take another look at my old favorite.
Edits << 27-Dec-2014 >> Added the following links:
Profile Support Center
How to use ICC color printer profiles for inkjet printers
Click the Kudos Thumbs-Up!
It is a nice way to say “Thank You" for the help.
Although I strive to reflect HP's best practices, I do not work for HP.
Kind Regards,
Dragon-Fur

OfficeJet Pro 8600 Plus e All in One fax to e-mail help

I purchased this unit yesterday for my office and I would like to have incoming faxes get sent to my computer as an e-mail. I have gone through the digital fax setup process but I am not receiving e-mails notifying me of a fax. Here are some specifics:
HP OfficeJet Pro 8600 Plus e All-in-one printer
Dell Inspiron 570 with Windows 7 64 bit OS
System is on a network but not through a server. Does anyone know how to set up the OfficeJet so it will send me e-mail notification when a fax is received? Any help is appreciated.

Hi,
You may set Fax to Email feature from the printer EWS page:
On the product control panel, touch the Right Arrow ( ), and then touch Setup . The setup menu displays.
Touch the Down Arrow ( ), and then touch Reports .
Touch Network Configuration Page . The product prints a network configuration page.
Locate the printer IP Address / URL to access the EWS:
Type the printer IP Address on you browser to access the EWS page
Click the Fax tab
Click Fax to E-mail / Network Folder under the left column
Click Start Wizard and follow the steps to enable the feature.
Select Forward the Faxes to an e-mail address and proceed.
Follow the steps and provide your email account SMTP settings, similar to those used for Outlook
NOTE: You may contact your ISP to obtain the settings of your email server.
Click Save and Test to verify any of the settings is correct.
If you use a public email server (e.g. Gmail) and cannot find the needed settings, please let me know and i will try helping you to locate the server settings.
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

OfficeJet Pro 8600 Plus fried by thunderstorm - how can I removed ink cartridges

Similar Messages

Maybe you are looking for