Offline file issues with windows 8.1 not responding

Hi,
I am trying to make a teachers home folder available offline so the teacher can access his work at home. I am using windows 8.1, and offline files is enabled. When I select the folder to make it available offline nothing happens, usually it should go through
a process of making the folder available offline.
Any help or advice will be helpful
Thanks in advance

Hi,
Please check the offline setting in Sync Center first.
Open Control Panel, then type offline in
search bar and press Enter.
Make sure Offline file is enabled.
Also you can try to use a little txt file for test if it could be offline access.
If problem persists, please check Event Viewer if it identify this problem.
Roger Lu
TechNet Community Support

Similar Messages

Issue with Print Properties button not responding in Adobe Reader 10.1.10

We've recently been upgrading Adobe Reader 9.4.4 to 10.1.10 and started having a few reports of the Print -> Properties box in Adobe Reader not responding. When this happens Adobe Reader will crash if you click on the Print button. If you go into Devices and Printers and try and access the Printer Properties you are prompted to install the driver for the device. It does seem to be quite random, it will work fine for days and the suddenly happen. I've done testing and have been able to get it happen by opening Outlook, Word or Excel but it is completely hit and miss. Sometimes the issue will happen and other times no matter how many times you open and close the various applications it's fine.
Fortunately it only seems to be an issue when accessing Properties, if you just print there are no options which is probably why we don't have more complaints. Unfortunately this didn't come to light until we'd rolled it out to 2000+ machines across 8 locations.
So far I've tried the following:
1. Upgraded to Adobe Reader 11.0.9 and same issue
2. Created a test print queue using a different print driver (my machine has a different driver again and is using a different print server)
3. Uninstalled a number of applications that have caused us issues with Office 2010 due to dodgy addins (Workshare and HP Filesite)
4. Rolled back to 9.4.4 and seems OK. Problem here is that they receive PDFs in formats not compatible with older than X.
System is Windows 7 Enterprise SP1 32bit, Office Professional 2010, printing is to Ricoh Equitrac (Follow You)
Anyone have a fix for this or come across this before. I'm going to try testing with a Postscript driver to see if that helps, which is the last item on Adobe's troubleshooting list.

Select a PDF file, CMD+I, check the Open With section, and ensure that AR is selected. If not, then select it and click on the Change All button. Alternatively, select Preview, which is my default PDF reader.

IPhone 5 issue with music playback- buttons not responding

When playing music on iPhone 5
- The play/skip button on my headphones does not work when pressed. If I want to pause a song, or tap twice to skip ahead, it does nothing. The volume buttons on the headphones work, but the center button does not. It DID work previously, but recently just stopped. I tried the same headphones on my iPod, and they work perfectly
- When the screen is locked, if I double tap the home button on the phone to bring up the playback controls, it does not play when I press Play, nor does it skip forward or back. None of the buttons respond.
It seems to be an iOS6 issue with the device not responding to the commands. Anyone know of a fix, or do we have to wait for a patch?

I found it!!! General, Passcode Lock, and make sure that under "Allow Access When Locked" catagory Reply with Message is ON

Is anyone having issues with Windows 8 phones not loading mobile versions of websites?

I was just wondering if anyone with a Windows phone is having problems loading the mobile site version of a Muse site when viewed on the phone? or if there is a known bug or incompatability?

Hello, same issue for me.
The site display whith the desktop version.

I have installed the agent 10 or 15 times and one installation hasfailed, no error appeared during the installation but I am havinginconsistent issues with my ethernet card not working here and there. Werebooted and can log into Novell client but th

I have installed the agent 10 or 15 times and one installation has failed, no error appeared during the installation but I am having inconsistent issues with my ethernet card not working here and there. We rebooted and can log into Novell client but the login prompt did not appear for ESM client or the icon was not in the systray. Everything seems to work, besides at times (a couple times today) it terminates his ethernet card/connection. I would re-image his computer but he has several applications and it would take several hours, so I am hoping someone has an idea to fix this issue. So I was trying to figure out why he did not get the prompt to login and why it's not in the systray and it appears to not have completed the install? I checked the add/remove programs, its not listed within their, I also checked the registry and found nothing for endpoint within their, but the files are within c:\program files\novell\zenworks endpoint security.
I have also tried uninstalling it but that fails due to it "not being installed", and it will not reinstall over itself either.
I did notice that stuninstdrv.exe is running in task manager. Any help would be great...
Windows xp sp3
ESM 3.5.154
Thanks,
Andy

If you are searching the registry, check for the "Senforce" string. It should be at HKLM\Software\Senforce
Try running the install program for the ZSC with the following command line:
setup.exe /V"STUNINSTALL=1"
If you've specified an uninstall password, try this one instead:
setup.exe /V"STUNINSTALL=1 STUIP=password"" (please note the double quote at the end)
Let me know if that helped you.
Daniel
>>>
From: Andy_DeWees<[email protected] du>
To:novell.support.zenworks.endpoint-security-management
Date: 2/5/2009 12:52 PM
Subject: I have installed the agent 10 or 15 times and one installation hasfailed, no error appeared during the installation but I am havinginconsistent issues with my ethernet card not working here and there. Werebooted and can log into Novell client but the login prompt did not appearfor ESM client or the icon was not in the systray. Everything seems towork, besides at times (a couple times today) it terminates his ethernetcard/connection. I would re-image his computer but he has severalapplications and
I have installed the agent 10 or 15 times and one installation has failed, no error appeared during the installation but I am having inconsistent issues with my ethernet card not working here and there. We rebooted and can log into Novell client but the login prompt did not appear for ESM client or the icon was not in the systray. Everything seems to work, besides at times (a couple times today) it terminates his ethernet card/connection. I would re-image his computer but he has several applications and it would take several hours, so I am hoping someone has an idea to fix this issue. So I was trying to figure out why he did not get the prompt to login and why it's not in the systray and it appears to not have completed the install? I checked the add/remove programs, its not listed within their, I also checked the registry and found nothing for endpoint within their, but the files are within c:\program files\novell\zenworks endpoint security.
I have also tried uninstalling it but that fails due to it "not being installed", and it will not reinstall over itself either.
I did notice that stuninstdrv.exe is running in task manager. Any help would be great...
Windows xp sp3
ESM 3.5.154
Thanks,
Andy

How to Move Offline Files Cache in Windows 7?

I'm using the offline files feature in Win7 (much better implementation, btw - kudos!) and I've run into a problem: the CSC is using up all the drive space on C:\. I'd like to move the CSC to D:\, however I've been unable to do so.
I've seen this posted here previously (2/2009), however the response was to follow the instructions from Vista (using migwiz.exe). When I launch migwiz.exe, I have no option of selecting the offline files as outlined in the Vista instructions (http://blogs.technet.com/filecab/archive/2006/12/12/moving-the-offline-files-cache-in-windows-vista.aspx).
Are there any other ways of doing this?
Thanks!

Hi everyone,
I have found a way to move the offline cache in W7, but it means you have to reset your existing offline files, give the new location, and resync the folders in the new location.
Here is what to do (if you haven't synchronised any offline files yet, for exemple after a clean install, you can start directly in step 3):
0) Make sure your existing offline files are synchronised with the server, as you are going to lose ALL the offline copies and you don't want to lose any new/modified files. Make a backup if you're not sure and if the files are important.
1) reset the content of the old cache by adding the following command in a batch file and running it (of course you can add the parameter in the registry manually, but it's quite handy to have the batch ready whenever you need to reset the cache):
REG ADD "HKLM\System\CurrentControlSet\Services\CSC\Parameters" /v FormatDatabase /t REG_DWORD /d 1 /f
2) Reboot, the added key will be detected, all the content of the cache will be deleted, as well as the key itself (it only resets once)
3) Add the following registry key in the same HKLM\System\CurrentControlSet\Services\CSC\Parameters section of the registry:
Type: REG SZ (string)
Name: CacheLocation
Value: the new location in NT format, ie \??\d:\csc if you want to create the new cache in d:\csc
4) Create the folder in the new location
5) Reboot (not sure if it's necessary, but better safe than sorry)
6) Reselect the files/folders you want to sync offline, and they should sync in the new location.
7) If you want to, you can delete the old cache location in c:\windows\csc by following the end of the vista procedure linked in the first post (using takeown etc)
It worked for me (Win7 RTM x86), let us know if it works for you...
Obviously it won't help if you don't want to / can't resynchronise, but if you're starting from scratch or don't mind resyncing from scratch, it's a good workaround.
EDIT: if you sync a lot of files and get a lot of errors, try to reset your offline files again following the above procedure (steps 1-2), disable offline files, reboot, enable offline files, reboot, and resync your files. Again, it worked for me...

Major Issues with Windows XP and Sound Blaster Audig

As mentioned in the post title, I'm using a Sound Blaster Audigy 4 card (recently purchased) and am having issues with Windows XP apparently because of it. When the card is physically installed, but the drivers are not, there are no problems. However, when the drivers are installed, Windows XP's "explorer.exe" crashes on boot, locking up the start menu and any other open windows. Now, I can manually end the explorer.exe application and then reboot it, and things will work... however, I cannot imagine that that is the intended functionality of this card. Additionally, I suspect the card in the failure of a game (Eve Online) but I would assume the issues are related. I've already narrowed the issue down to the Sound Blaster drivers. I've tried booting with the SB drivers but without the video card drivers, and the problem recurred. Every time I boot with the SB drivers installed, it fails. Without them, things seem to run normally. If it helps, I'm using an Intel Core 2 Duo E6400 processor, with GB of DDR800 RAM. I've installed Windows Service Pack 2 and all the other updates. The video card is a Geforce 7950 GT, with the latest NVidia Forceware (93.7) drivers. I've had this problem with both the Audigy drivers on the CD that came with the card and the newest ones downloaded from this website. My motherboard is a Gigabyte GA-965P-DS3, which includes onboard sound hardware, but I have disabled it at the BIOS level. I can provide dxdiag information or anything like that if necessary. Does anyone have any advice, suggestions, or have you encountered a similar problem?Message Edited by DerekKatz on 2-04-200603:2 AM

Thanks for the helpful reply Dan
I ran the file, CTZAPXX.exe, like suggested, and it ran without a problem. It installed the files and even required me to reboot my computer!!
However, after a computer restart, I am still in the same boat. Codecs are installed, but the location of the device is "unknown". In Device manager, there are no unknown devices; it shows the codecs in the sound tab, but no actual hardware; as if my sound card does not exist.
I use my computer for music, and my buddy needs me tomorrow night to play some music stored on my computer. I really do appreciate the help I am offered. I do not mean to sound impatient, but I really need this device fixed, or I will have to have him buy me a sound card....

Itunes issues with Windows having to do with Apple's patent

I had a thought and am not sure if it's right. I was wondering if myissues with Apple Itunes store on Windows 7 has anything to do with the Patent laws and all with Apple and samsung and all that.

I had the same issues with Windows 8 Consumer Preview. I installed on a fresh system and still had issues.
I experienced extreme lag, with pretty much everything, and iTunes freezing once I attempted to change the currently playing song.
I had a mess with compatibility mode and found out that running it in with Compatibility mode enabled for Windows XP (Service Pack 3) and as an administrator fixed it. It works now, however, there is a popup message that comes up on launch telling you to change the compatibility settings, but pressing "OK" makes it go away.
How?
Open Windows Explorer, and navigate to: "C:\Program Files\iTunes" (For 32bit) or "C:\Program Files (x86)\iTunes" (For 64bit), unless you changed it.
Right-click on "iTunes.exe", select "Properties" from the context menu, and click the "Compatibility" tab.
Under "Compatibility mode" check off "Run this program in compatibility mode for:" and select "Windows XP (Service Pack 3)" from the drop down menu.
Further down under "Privilege level" check off "Run this program as an administrator".
Click "Apply" and "OK".
Should fix any issues, I have my default iTunes Media Folder Location within an external hard drive so unplugging all of my USB's wasn't an option.
Hope I helped!

Itunes issues with windows 8... laggy?

anyone one else having abit a of laggy issue with playing music on windows 8?
i just upgraded to windows 8 con. preview, and its great and fast.
i use to have windows 7 and itunes never skipped a beat.
i have a sony viao with an upgraded ram and ssd hdd.
and its pretty fast.
so i dont think its my computer and windows 8 seems to be fine.
anyone else having this issue? but it only happens now and then.......
NOTE:
i have my music all copied to my sdd hdd aswell
and thats all thats really on there as i have ext. hdd's.
i have a average size library in itunes with around about 50gb of music.

I had the same issues with Windows 8 Consumer Preview. I installed on a fresh system and still had issues.
I experienced extreme lag, with pretty much everything, and iTunes freezing once I attempted to change the currently playing song.
I had a mess with compatibility mode and found out that running it in with Compatibility mode enabled for Windows XP (Service Pack 3) and as an administrator fixed it. It works now, however, there is a popup message that comes up on launch telling you to change the compatibility settings, but pressing "OK" makes it go away.
How?
Open Windows Explorer, and navigate to: "C:\Program Files\iTunes" (For 32bit) or "C:\Program Files (x86)\iTunes" (For 64bit), unless you changed it.
Right-click on "iTunes.exe", select "Properties" from the context menu, and click the "Compatibility" tab.
Under "Compatibility mode" check off "Run this program in compatibility mode for:" and select "Windows XP (Service Pack 3)" from the drop down menu.
Further down under "Privilege level" check off "Run this program as an administrator".
Click "Apply" and "OK".
Should fix any issues, I have my default iTunes Media Folder Location within an external hard drive so unplugging all of my USB's wasn't an option.
Hope I helped!

Issue with ARD 3.0 not pushing out Installs, Says its installing but not

Issue with ARD 3.0 not pushing out Installs, Says its installing but not
Has anyone seen this. It seems to happen with ARD 3, have not seen this in ARD 2.
I go to the Install Packages on Target Computers, put in: 10.4.7 Combo (for the correct CPU, PPC or Intel), security updates, QT 7.1.2, etc.
Push it to Macs I can connect to, observe and control.
The progress bar copies the files (in some instances it does not) and then it just hangs there, bar does not move, Installs never finish, not good, very odd.

Is it the same clients that have the problem every time? Are those clients doing anything cpu intensive? Have you tried rebooting the affected clients?
Maybe try a smaller package on those clients.

Attempting to use certreq -enroll to enroll to a client authentication certificate works with Windows 8, but not with Windows 7...

This has been an issue for a while now. Trying to use certreq -enroll -machine [Template Name] on Windows 7 machines fails with not implemented. When I run this command with the -q flag I see that the certificate I want is unavailable and displays:
A valid certification authority (CA) configured to issue certificates based on this template cannot be located, or the CA does not support this operation, or the CA is not trusted.
When I go into the properties of this certificate and goto the Certification Authority tab and check the "Show all enrollment servers" it shows my server greyed out with this message:
The system could not determine if you can access this certificate. Not implemented.
The template sits on a enterprise 2003 server CA and this process works with Windows 8.1 machines. Which means that the template has the correct permissions and is issued correctly.
Is this a known issue with Windows 7 or am I missing something in the config? Help is greatly appreciated.
Thanks,

Hi
I have done some tests on a Windows 7 Enterprise machine and a Windows 8.1 Enterprise machine, it turns out that I have the same issue with you.
On the Windows 7 machines, I cannot use Certreq.exe to request machine certificates, but I can successfully request user certificates, and there is no issue with the Windows 8.1 machine.
Best Regards,
Amy
Interesting. From what I can tell, there are no patches that fix this issue either...

Compatibilityy issue with windows XP and windows 8.1 for adobe photoshop elements 4.0

Compatibility issue with windows XP and windows 8.1 for adobe photoshop elements 4.0?comcom

You are going to have to contact Adobe on this one. We are other users.
Sounds like it's not even an Apple question? Not sure.
But the Adobe program changed, nothing changed in iTunes, right?

X220 and Offline Files issue.

My manager uses the offline files feature quite a lot and now she has moved to an X220 with Win 7 Pro 64-bit, however some days when she logs in she notices the sync icon isn't in the tray. When you go into offline files it says its enable but not active a restart will activate it. However rebooting leads to the same thing, instead I go into the services page and find that although set to auto the offline file service is not running, I click start and it kicks back into life.
Now I have viewed the event viewer from when the computer starts and the Offline file service first starts then gchanges state to auto (delayed) then changes back to auto before finally saying that the service has stopped. All of these are info events as opposed to error or warning events. I know some services don't run even when set to auto as they are not needed however without offfline files service running no syncing is done and you also lose the "Always available offline" option when you right click a folder/file.
If anyone has any ideas as to whyt the service is stopping that would be great.
Mark

It is caused by a bug in "RapidBoot" which is software that Lenovo preloads. You can either (a) uninstall RapidBoot or (b) upgrade to the latest version which fixes this bug. I recommend (a) - you won't miss RapidBoot by uninstalling it. Sorry for your inconvenience.

Weird issue with Windows Server 2008 R2 Print Server

I have an issue with Windows 2008 R2 (VMWare Hosted) running Windows Print Server.
Prior to a small network change, the print server was working well, hosting about 80 different networked printers from various vendors.
We made a change (that we ended up rolling back) to the Client's DHCP Scope OPT 006 (DNS Servers). The DNS servers never quite worked right and broke AD authentication to different servers, and was just a mess.
After rolling back we are not able to keep the printers online. If we ping them from the print server, the printer(s) never wake up, when a print job is submitted. If we ping them from one of the access switches, they work fine (until they fall back asleep),
to prevent this, if we start a ping on the server AFTER waking them up from the Switch Ping, they stay online and no problems.
If we stop the ping, they fall back asleep at some point, and again, won't wake up without intervention/switch side ping.
Has anyone experienced anything like this? Any tips on how I could possibly resolve it?
Thanks in advance.

Hi,
According to your description, the issue seems to be that the printers can't keep online. Sounds like a power managerment issue. Why these printers fall into sleep? Have you consulted this issue with the manufacturer of these printers? Do these printers
fall into sleep if them lose the contact with printer server? Have you tried to reset the printers?
>>We made a change (that we ended up rolling back) to the Client's DHCP Scope OPT 006 (DNS Servers).
DNS client will cache the recently queried records. If the DNS server has replied with a wrong records, communication issues will occur. To clear the DNS cache on a Windows device, please run the command below:
ipconfig /flushdns
Best Regards.
Steven Lee Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

My HP Pavilion p7-1439 with Windows 8 will not add Bluetooth Devices.

My HP Pavilion p7-1439 with Windows 8 will not add Bluetooth Devices. I ran all available updates using HP Assistant. The BT devices work with Laptop, iPhone, Surface and Ipad but not the HP Desktop. I can access the Add Device button and the system searches but never finds any BT devices. Any thoughts?

Hi NumberTumbler,
I would like to help you with your Bluetooth issue.
In this document Understanding Bluethooth Wireless Technology go to the section "Setting up a Bluetooth Device" for detailed information about setting up Bluetooth devices on your computer.
Let me know if this helps or if you need any further assistance.
Thank you,
I worked on behalf of HP.

Offline file issues with windows 8.1 not responding

Similar Messages

Maybe you are looking for