OHS 11gR1 web-page not showing up after creation, registration of webgate
Hello there,
The OHS webpage on host:7777 is not showing up after I created, registered the webgate on oam 11g console. I copied the 2 artifacts into the ohs proxy server box in the webgate/config folder and restarted OHS instance but now, the ohs page won't show up. The opmn status says its alive but it doesnt show up in the browser.
I have oam 11.1.2 installed with webgate 11.1.2 and ohs webtier 11.1.1.6.0. Am I missing any step? Do I need to create a authentication scheme before I check it? Please advise to the earliest convenience.
Thanks!!
Hi,
You need to create authentication scheme. also create resourse for index.html page in OAM console and add it to protected resourse list. So when you will access OHS with 7777 port it will redirect to OAM SSO page, after successful login it will take you to the home page of OHS.
mark, if this helps.
Regards,
Kishore
Similar Messages
-
Iweb web page not showing full page on the web
I have a web site that I build using iweb. I have installed intense debate for a commenting system. I have two problems. My comments are not showing up even after i approve them even though i chose to not monitor comments and when you view the page most of the comment box is missing. I have changed the height and width of the page, changed the height and width of the age layout in iweb, nothing seems to help. I have contacted there support team but they just keep saying the same things. Apparently i need to do this to get the commenting system working "looks like you don't have any JavaScript variables set. You'll need to set some postid's and URLs." That is copied directly from the email they sent me. I don't know what any of that means...And please don't say read the tutorial they offer because i cant fallow that either. This is the address of the website please look at it and tell me what you see. http://www.siobhanbyron.com/SiobhanByron/The_Outlying/TheOutlying.html
I did. I clicked the link you left and it brought me to another discussion similar to this one and then i clicked on the link that was within that conversation (http://home.cyclosaurus.com/CyclosaurusBlog/Entries/2011/2/12Dynamically_ResizeiFrame.html) and it brought me to here (http://home.cyclosaurus.com/CyclosaurusBlog/Entries/2011/2/12Dynamically_ResizeiFrame.html) here, your blog. Which is an excellent example of what i a trying to do. I will instead try to add the code that you had already placed in the prior conversation. I wasn't sure if the code you were speaking of was in your blog or in the actual conversation...ill try that
-
LMS 4.1, Web page not coming up after reboot
Our LMS server was rebooted recently, I do not know if the services were shut down prior to reboot.
Since then, I am unable to pull the web page up.
Sometimes I can get to the login screen, then after entering credentials "Internet Explorer cannot display webpage"
Other times it goes straigt to error message.
I have tried with firefox also.
We are still getting alerts, and it looks like it is getting directed properly:
Shown below is a prtion of "stdout"
productIsLMS true
[Thu Dec 29 13:56:58 EST 2011]login::service. Checking for valid request.
[Thu Dec 29 13:56:58 EST 2011]login::service. It is a valid authenticated req.
[Thu Dec 29 13:56:58 EST 2011]login::service. Hence redirecting to
https://10.10.10.1:443/CSCOnm/servlet/com.cisco.core.mice.main?command=initializeAndValidate&url=/cwportal/c/portal/login&context=/CSCOnm/servlet&port=443
RM isValidReq decodedAddr is : 10.1.1.10
RM isValidReq remoteAddr is : 10.1.1.10
productIsLMS true
[Thu Dec 29 13:56:58 EST 2011]login::service. Checking for valid request.
[Thu Dec 29 13:56:58 EST 2011]login::service. It is a valid authenticated req.
[Thu Dec 29 13:56:58 EST 2011]login::service. Hence redirecting to
https://10.10.10.1:443/CSCOnm/servlet/com.cisco.core.mice.main?command=initializeAndValidate&url=/cwportal/c/portal/login&context=/CSCOnm/servlet&port=443
RM isValidReq decodedAddr is : 10.1.1.10
RM isValidReq remoteAddr is : 10.1.1.10
productIsLMS true
[Thu Dec 29 13:56:58 EST 2011]login::service. Checking for valid request.
[Thu Dec 29 13:56:58 EST 2011]login::service. It is a valid authenticated req.
[Thu Dec 29 13:56:58 EST 2011]login::service. Hence redirecting to
https://10.10.10.1:443/CSCOnm/servlet/com.cisco.core.mice.main?command=initializeAndValidate&url=/cwportal/c/portal/login&context=/CSCOnm/servlet&port=443Did you apply the patch successfully with no errors?
Yes
Do you have any invalid objects in the database?
NO
Did AutoConfig complete successfully?
Yes
Please check Apache log files for details about the error.
Thanks,
Hussein -
Web page not showing up with template
I have created a web page that looks great when I preview it,
however now that I've put it on the web site, it shows up without
the template and images. I have tried for 3 days to fix this but
I'm at a loss. Can anyone help? p.s. This is the first time I've
used Dreamweaver so please forgive me if I appear totally lost!Post a link to the page, please.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"1wingedheart" <[email protected]> wrote in
message
news:ehlfrf$hhg$[email protected]..
>I have created a web page that looks great when I preview
it, however now
>that
> I've put it on the web site, it shows up without the
template and images.
> I
> have tried for 3 days to fix this but I'm at a loss. Can
anyone help? p.s.
> This
> is the first time I've used Dreamweaver so please
forgive me if I appear
> totally lost!
> -
Web pages not showing up correctly
I performed a typical daily update to my website last night, and when I reviewed it online, the typical links do NOT shot up. They are often words that are linked to news sites. These 'hot' words do not show up now…only bluish rectangular boxes with blue question marks in them. When the page loads, it seems to NOT load most of the links. Some links still do show up and it seems that all of them work if clicked on. Any ideas?
For reference: www.njnaturenotes.com
This might help if others see what I am seeing.Rich:
Just visited your site and everything looks as it should. There are not blue boxes and the counter is displaying all 5 digits. Clear your browser's cache and reload the page. See if that will help.
OT -
Web page not loading properly after upgrade to 2.0
I have upgraded my ipod touch to 2.0 and I have had a few problems as 2.0 seems a little unstable. I'm sure Apple wll release a patch fix.
However I do have one problem with the upgrade which is annoying. I have a web page for my boys football (soccer) page which contains scrolling text within a web frame. This has always worked, but no longer does since the upgrade.
The URL is http://www.finchampsteadfc.co.uk/scriptsdir/team.php?season=0708&team=U8 if anyone has any ideas or is there a new setting I should use?
Thanks in advanceThe source looks like this:
<script src="/i/javascript/htmldb_html_elements.js" type="text/javascript"></script>
When I paste the below url into the browser,
http://wmsi001370:7778/i/javascript/htmldb_html_elements.js
The javascript code is displayed fine. So it looks like the code is where is should be?
But doSubmit is not defined in that file. But there are other includes som maybe it is defined in those.
Message was edited by:
wmpelor -
Apex 4.2 developer page not showing up after installing over 10g
Hi there,
So as luck would have it my Win XP OS crashed. Yes, its the office laptop and I cannot upgrade the OS for now. Anyhow, I got the whole machine re-imaged and installed 10g which had version 2.1 and everything was okay. I was earlier running apex 4.1.1. I could not find that setup on the oracle site so I downloaded apex 4.2 and ran the installation as per page
http://www.oracle.com/technetwork/developer-tools/apex/application-express/upgrade-apex-for-xe-154969.html
Everything went through properly except for step
5. Log back into SQL*Plus (as above) and load images:
SQL> @apxldimg.sql APEX_HOME
[Note: APEX_HOME is the directory you specified when unzipping the file. For example, with Windows 'C:\'.]
where it asked me to enter the directory and I entered C:\
This is what happened
SQL> @apxldimg.sql
PL/SQL procedure successfully completed.
Enter value for 1: C:\
old 1: create directory APEX_IMAGES as '&1/apex/images'
new 1: create directory APEX_IMAGES as 'C:\/apex/images'
Directory created.
^C
C:\apex>
I see a backslash and forward slash so I did a ctrl c . When I tried running the command again - @apxldimg.sql
it just would open the .sql file.
Not sure if this is the issue, but anyhow, after this, when I tried the "go to database page. It just shows a blank page. Any idea what needs to be done. I was happy with 4.1.1. Is that available anywhere? Maybe I can remove XE and do a fresh install with that.
Please advise.
thanks,
RyanJeff,
I had a question on that. I am installing the software on my local machine. I have my apex files under C:\apex
Now when it asks for images directory, what should I enter,
C:
C:\
C:\apex
Reason being that as per the upgrade instructions it was given as 'C:\'
when I gave C:\ the new path showed up as C:\/apex/images.
also, do we need to give the directory in single quotes?
thanks,
Ryan -
Page not showing changes after refreshing
For some reason after I made a few changes to my index page and uploaded with Dreamweaver MX, the changes won't show up in my browser(s). I don't think I did anything different, and I made changes on it just a few minutes ago. It's maddening to not be able to figure out something so simple.
Can someone assist?Hi,
pardon, but have you really done all these things, so that your browser is "convinced" to show your modification?
- refresch browser
- If set, delete the bookmark to the page or re-create the bookmark.
- Quit browser
- Empty the Temp Internet Files Internet Options
- Clear History
- Delete everything in general, where the browser remembers visited sites.
- Restart
- Clear Site visit
- Clear Bookmark
- Use another browser in order to test
Hans-G. -
Router web page not showing correctly
I use WRT54G wireless router. When trying to change options on my router, I go to 192.168.1.1 in a browser and put in my password. When the site opens, it resembles what it is supposed to look like but is kind of messed up. Here is a picture of what my page looks like: http://img383.imageshack.us/my.php?image=linksysbb5.png With it like that it is almost impossible to change anything. I'm not sure what's wrong. I've looked around for help on the web but most of the things I've found is people who just can't even connect to the site. By the way, I don't know if this has anything to do with it but when running the CD to hookup the modem, once it gets to the part where it asks for the password, I put it in and once the loading bar comes up I get a pop-up saying I have low or no internet connection for a second or two then goes away. It continues to load but nothing happens and eventually the password thing pops up again and it starts all over. Any help is appreciated, thanks.
Message Edited by pb93 on 03-08-2008 09:41 AMI'm not sure but could the problem possibly be with the router itself. I checked many other topics of people reporting the same problems as me and the person above me. They all seem to be the same WRT54G wireless routers and all seem to have been reported at least within the last couple weeks. It seemed like the help given too never really helped the problem. I'm sure it's not the browser because I have had the same result on all that I've tried or the firewall because I have had that off while trying just like everyone else who seemed to have the problem.
-
Help with I Web- Pages not showing links
Hi,
I was wondering if someone can help me out. I tried to publish a default page, just the welcome page and podcast page (all default). It published ok to the server but when I visited the site it doesnt show any link to the podcast page.
When I tried to only publish the podcast page (Ive deleted the welcome screen), the podcast page doesnt even show the default video and sound i.e. no entries, however I can see it in Iweb and I can also subscribe to it from the Itune using RSS feed.
Can someone Please Please help. ThanksIt would be a lot easier to see what you are talking about and perhaps see what the problem is if you would provide your url.
-
Web pages not showing correctly
I am having trouble viewing one particular page http://www.ymcaharrisburg.org/ , but this has also happened to me with other pages while using safari. On the Y page where the boy is jumping, there should be 8-9 links to click on, but I only can see 3-1/2 links, with the "view open positions" over one of the other links. Its like their picture covers the links. I have been on this site with our old PC and it works fine. On other websites, various links have overlapped each other and I was unable to click on those also.
I'm sorry if this is a repeat question.
Thanksit would appear that the website is coded for windows as I have the same problem you do. Send a message to their webmaster.
hpr3 -
I am trying to update a chart in Pages that I created in Numbers, but the refresh button does not show up after I save the Numbers file. Thoughts?
It is hard to exactly understand what you have done or not by you one sentence description. My thought is have you read in the Pages User Guide? Here is what it says about updating a chart in Pages:
Updating a Chart Copied from a Numbers Document
If you’ve created a chart in Numbers, you can copy it and paste it into your Pages document. After it’s been pasted into Pages, the chart remains linked to the data tables it references in Numbers. To change the chart data, open the original Numbers document and edit the data there, save the Numbers document, and then refresh the chart data in Pages.To update a chart after you’ve updated its linked Numbers table:
Select the chart on the page and click the Refresh button that appears.
Note: You must save the Numbers document before copying and pasting your chart into your Pages document and after editing the Numbers data tables that the chart references.
I hope it has helped you. -
"Page not found" error after 5 minutes of see "processing" on the screen
We are using WebLogic 8.1 server and also the WebLogic proxy as our front end. When a user runs a process that takes over 5 minutes using the Proxy URL they receive an IE "Page not found" error after 5 minutes of seeing "processing" on the screen. If they run it on none Proxy URL (directly on WebLogic server) it works fine.
We have looked into the WLIOTimeoutSecs parameter and set in the web.xml for both the HttpClusterServlet and HttpProxyServlet, but this had no affect.
Is there another timeout that controls this 5 minute timeout? It seems if one uses Apache and sets the WLIOTimeoutSecs parameter to a higher number than 300 seconds there is not an issue.
Did this parameter get omitted for the WebLogic Proxy and if so, what does one use?
Thanks,
JimHello George,
Thank you for the quick reply. I will surely try the option suggested by you.
But what i was thinking is that as this is not a Connection Time Out (500) error, instead its a Page Not Found error, it would be Session-Timeout and not Connection Time-Out.
Maybe I should be looking at:
SESSION-TIMEOUT due to kernel:
Kernel parameter: rdisp/gui_auto_logout
Kernel parameter: rdisp/plugin_auto_logout
as per the SAP OSS Note: 705013
But again, I think this Note is pointing to the SICF service and IAC type of iView and not SAP Transaction type iView. Please advice.
Thanks,
Gaurav
Edited by: Gaurav Shah on Dec 4, 2008 9:37 PM
Edited by: Gaurav Shah on Dec 4, 2008 9:42 PM -
Login action buttons no longer work and some pages not displaying correctly after upgrade.
After recent update, some web pages not displaying correctly and Login buttons on some sites do not work. I've updated my plugins and restarted computer, but problems remains. Is this Java, Javascript or something else? Same pages are working fine in IE.
Please update the firefox to the latest version of firefox 26
Start Firefox in Safe Mode to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
<b> To Enable SafeMode </b>
*You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
[[Image:FirefoxSafeMode|width=520]]
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
If it works in Safe Mode and in normal mode with all extensions (Tools > Add-ons > Extensions) disabled then try to find which extension is causing it by enabling one extension at a time until the problem reappears.
Close and restart Firefox after each change via "Firefox > Exit" (Windows: Firefox/File > Exit; Mac: "Firefox > Quit Firefox"; Linux: "Firefox/File > Quit")
* https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes -
The ‘Welcome to Firefox’ page that shows up after an update is installed has been coming up when ever I start up Firefox since I did the last update to 18.0.1, several days ago. How do I get it to stop?
The problem turned out to be an error on the prefs.js file where one or two of the parameters with the current version number were not properly updated, so the browser always thought I was opening it for the first time on a new version. I edited the version number in those parameters to agree with the version number in the Help/About dropdown and the problem went away. It has been a while now and I do not recall which were the faulty parameters, but here are the ones in my current prefs.js file that refer to the browser version (currently 21.0 for me):
user_pref("browser.startup.homepage_override.mstone", "21.0");
user_pref("extensions.enabledAddons", "%7Bd40f5e7b-d2cf-4856-b441-cc613eeffbe3%7D:1.68,%7B02450914-cdd9-410f-b1da-db004e18c671%7D:0.97.12c,%7BBBDA0591-3099-440a-AA10-41764D9DB4DB%7D:11.3.0.9%20-%205,%7B2D3F3651-74B9-4795-BDEC-6DA2F431CB62%7D:2013.4.1.2,%7B972ce4c6-7e08-4474-a285-3208198ce6fd%7D:21.0");
user_pref("extensions.lastAppVersion", "21.0");
user_pref("extensions.lastPlatformVersion", "21.0");
user_pref("gecko.mstone", "21.0");
I have not encountered the same problem with recent version upgrades. Good luck!!
Maybe you are looking for
-
How to change default page in webclient
Hi, For business role Ic_agent, the default page is identify account when you login. I wanna change the default page to interaction record.How to configure? Thanks! BR, ROBERT
-
My Toshiba laptop just recently started showing the the following error message when I try to open iTunes: " iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 998)". I did what was requested and reinstalled iTunes,
-
Volume differences between songs
Okay. My mp3 files in iTUNES play fine. I have the Sound Check checked and they play at the same volume. The problem I have is when I load the songs to my iPOD, the volumes are not the same. Some songs are softer than others. And just using the volum
-
MouseChildren = False + Text Input = no text selection cursor
I need to be able to set mouseChildren to false and still see the text selection cursor when rolling over the field. Everything is currently working correctly except the text selection cursor has changed to the regular pointer. Any ideas?
-
Hi experts Purchasing infosources 2lis_02_HDR and ITM are supplying data into a data target cube. We did init upload for both the sources. Firstly we did the 2LIS_02_ITM and then did 2LIS_02_ITM. Do we face any problems by doing this way..usually fir