OID-AD Integration -log files help

Hi.
im bootstrapping from AD to OID...some users failed to be copied to OID...where can i find the log files to fix this issue?
thanks
Bootstrapping completed.
#entries read ..................... 1850
#entries filtered ................. 0
#entries ignored .................. 0
#successfully processed entries ... 1432
#failures ......................... 418
Please see the log file for more information.
Updating the profile's last change number ..... Done.
========

Hi !
- Check $INFRA_HOME\ldap\odi\samples\ldp2ldp.properties used for users
Example : D:\Ora10infra\ldap\odi\samples\ldp2ldpUsers.properties
. Check inside that odip.bootstrap.logseverity is set to 15 to get all messages
. Check odip.bootstrap.trcfile
Example : odip.bootstrap.trcfile = D:\\ora10infra\\ldap\\odi\\conf\\bootstrap.trc
. Check odip.bootstrap.logfile
Example : odip.bootstrap.logfile = D:\\ora10infra\\ldap\\odi\\conf\\bootstrap.log
==> Check these log files after ther bootstrap
- Look at $INFRA_HOME\ldap\odi\log
- Look at $INFRA_HOME\ldap\log
- When you run dipassistant bootstrap command, add the parameter : -tracelevel 63 to get more traces
Regards,
Nicolas Stiévenard

Similar Messages

  • Kernel panics log file help

    I have had 11 kernel panics in 2 weeks. Can someone help me read the log files and understand where my problem is?
    Fri May 13 11:51:01 2011
    panic(cpu 0 caller 0x9f8c8f): NVRM[0/1:0:0]: Read Error 0x0061002c: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0xc0000000 0x7ef6f000 0x0a5480a2, D0, P2/4
    Backtrace (CPU 0), Frame : Return Address (4 potential args on stack)
    0x5c08bcb8 : 0x21b510 (0x5d9514 0x5c08bcec 0x223978 0x0)
    0x5c08bd08 : 0x9f8c8f (0xc0e23c 0xc7e840 0xc1d3cc 0x0)
    0x5c08bda8 : 0xb135d3 (0x93e4804 0x857c004 0x61002c 0x998e97)
    0x5c08bdf8 : 0x1657251 (0x857c004 0x61002c 0x6400 0xa157bc4)
    0x5c08be18 : 0xad7ef6 (0x857c004 0xa0cd004 0x3800 0xa00a818)
    0x5c08be38 : 0xb8193e (0x857c004 0xa0cd004 0x1 0x0)
    0x5c08bea8 : 0x9e9771 (0x857c004 0x0 0x0 0x0)
    0x5c08bf48 : 0x99a04f (0x857c004 0x90c519c 0x5c08bf68 0x29f562)
    0x5c08bf78 : 0x22fd0d (0x9487400 0x857c004 0x5c08bfc8 0x550788)
    0x5c08bfc8 : 0x2a06dc (0x863ea0 0x0 0x2a06eb 0x10ed36c4)
          Kernel Extensions in backtrace (with dependencies):
             com.apple.nvidia.nv50hal(6.2.6)@0x15d0000->0x19e4fff
                dependency: com.apple.NVDAResman(6.2.6)@0x992000
             com.apple.NVDAResman(6.2.6)@0x992000->0xc7ffff
                dependency: com.apple.iokit.IOPCIFamily(2.6)@0x952000
                dependency: com.apple.iokit.IONDRVSupport(2.2)@0x985000
                dependency: com.apple.iokit.IOGraphicsFamily(2.2)@0x963000
    BSD process name corresponding to current thread: kernel_task
    Mac OS version:
    10J869
    Kernel version:
    Darwin Kernel Version 10.7.0: Sat Jan 29 15:17:16 PST 2011; root:xnu-1504.9.37~1/RELEASE_I386
    System model name: MacBookPro6,2 (Mac-F22586C8)
    System uptime in nanoseconds: 1778627781965
    unloaded kexts:
    com.apple.driver.AppleUSBUHCI          4.1.5 (addr 0x14a9000, size 0x65536) - last unloaded 92561894346
    loaded kexts:
    com.vmware.kext.vmnet          3.0.0
    com.vmware.kext.vmioplug          3.0.0
    com.vmware.kext.vmci          3.0.0
    com.vmware.kext.vmx86          3.0.0
    com.silex.driver.sxuptp          1.5.1
    at.obdev.nke.LittleSnitch          2.2.05
    com.apple.driver.AppleHWSensor          1.9.3d0 - last loaded 29427861230
    com.apple.driver.AppleBluetoothMultitouch          54
    com.apple.driver.AGPM          100.12.19
    com.apple.driver.AppleMikeyHIDDriver          1.2.0
    com.apple.driver.AppleHDA          1.9.9f12
    com.apple.driver.AudioAUUC          1.54
    com.apple.driver.AppleMikeyDriver          1.9.9f12
    com.apple.Dont_Steal_Mac_OS_X          7.0.0
    com.apple.driver.AudioIPCDriver          1.1.6
    com.apple.driver.AppleUpstreamUserClient          3.5.4
    com.apple.driver.AppleMCCSControl          1.0.17
    com.apple.driver.SMCMotionSensor          3.0.0d4
    com.apple.filesystems.autofs          2.1.0
    com.apple.driver.AppleIntelHDGraphics          6.2.6
    com.apple.driver.AppleIntelHDGraphicsFB          6.2.6
    com.apple.driver.ACPI_SMC_PlatformPlugin          4.5.0d5
    com.apple.driver.AppleLPC          1.4.12
    com.apple.GeForce          6.2.6
    com.apple.driver.AppleGraphicsControl          2.8.68
    com.apple.kext.AppleSMCLMU          1.5.0d3
    com.apple.driver.AppleUSBTCButtons          200.3.2
    com.apple.driver.AppleUSBTCKeyboard          200.3.2
    com.apple.driver.AppleIRController          303.8
    com.apple.driver.AppleUSBCardReader          2.5.8
    com.apple.BootCache          31
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
    com.apple.iokit.SCSITaskUserClient          2.6.5
    com.apple.iokit.IOAHCIBlockStorage          1.6.3
    com.apple.driver.AppleUSBHub          4.1.7
    com.apple.driver.AppleFWOHCI          4.7.1
    com.apple.driver.AirPortBrcm43224          427.36.9
    com.apple.iokit.AppleBCM5701Ethernet          2.3.9b6
    com.apple.driver.AppleEFINVRAM          1.4.0
    com.apple.driver.AppleSmartBatteryManager          160.0.0
    com.apple.driver.AppleUSBEHCI          4.1.8
    com.apple.driver.AppleAHCIPort          2.1.5
    com.apple.driver.AppleACPIButtons          1.3.5
    com.apple.driver.AppleRTC          1.3.1
    com.apple.driver.AppleHPET          1.5
    com.apple.driver.AppleSMBIOS          1.6
    com.apple.driver.AppleACPIEC          1.3.5
    com.apple.driver.AppleAPIC          1.4
    com.apple.driver.AppleIntelCPUPowerManagementClient          105.13.0
    com.apple.security.sandbox          1
    com.apple.security.quarantine          0
    com.apple.nke.applicationfirewall          2.1.11
    com.apple.driver.AppleIntelCPUPowerManagement          105.13.0
    com.apple.driver.AppleHIDKeyboard          141
    com.apple.driver.IOBluetoothHIDDriver          2.4.0f1
    com.apple.driver.AppleMultitouchDriver          207.10
    com.apple.driver.AppleProfileReadCounterAction          17
    com.apple.driver.AppleProfileTimestampAction          10
    com.apple.driver.AppleProfileThreadInfoAction          14
    com.apple.driver.DspFuncLib          1.9.9f12
    com.apple.driver.AppleProfileRegisterStateAction          10
    com.apple.driver.AppleProfileKEventAction          10
    com.apple.driver.AppleProfileCallstackAction          20
    com.apple.iokit.IOSurface          74.2
    com.apple.iokit.IOBluetoothSerialManager          2.4.0f1
    com.apple.iokit.IOSerialFamily          10.0.3
    com.apple.iokit.IOAudioFamily          1.8.0fc1
    com.apple.kext.OSvKernDSPLib          1.3
    com.apple.driver.AppleSMBusController          1.0.8d0
    com.apple.iokit.IOFireWireIP          2.0.3
    com.apple.driver.AppleHDAController          1.9.9f12
    com.apple.iokit.IOHDAFamily          1.9.9f12
    com.apple.iokit.AppleProfileFamily          41
    com.apple.driver.IOPlatformPluginFamily          4.5.0d5
    com.apple.driver.AppleSMBusPCI          1.0.8d0
    com.apple.nvidia.nv50hal          6.2.6
    com.apple.NVDAResman          6.2.6
    com.apple.iokit.IONDRVSupport          2.2
    com.apple.driver.AppleSMC          3.1.0d3
    com.apple.iokit.IOGraphicsFamily          2.2
    com.apple.driver.BroadcomUSBBluetoothHCIController          2.4.0f1
    com.apple.driver.AppleUSBBluetoothHCIController          2.4.0f1
    com.apple.iokit.IOBluetoothFamily          2.4.0f1
    com.apple.driver.AppleUSBMultitouch          206.6
    com.apple.iokit.IOUSBHIDDriver          4.1.5
    com.apple.iokit.IOSCSIBlockCommandsDevice          2.6.5
    com.apple.iokit.IOUSBMassStorageClass          2.6.5
    com.apple.driver.AppleUSBMergeNub          4.1.8
    com.apple.driver.AppleUSBComposite          3.9.0
    com.apple.iokit.IOSCSIMultimediaCommandsDevice          2.6.5
    com.apple.iokit.IOBDStorageFamily          1.6
    com.apple.iokit.IODVDStorageFamily          1.6
    com.apple.iokit.IOCDStorageFamily          1.6
    com.apple.driver.XsanFilter          402.1
    com.apple.iokit.IOAHCISerialATAPI          1.2.5
    com.apple.iokit.IOSCSIArchitectureModelFamily          2.6.5
    com.apple.iokit.IOUSBUserClient          4.1.5
    com.apple.iokit.IOFireWireFamily          4.2.6
    com.apple.iokit.IO80211Family          314.1.1
    com.apple.iokit.IONetworkingFamily          1.10
    com.apple.iokit.IOUSBFamily          4.1.8
    com.apple.iokit.IOAHCIFamily          2.0.4
    com.apple.driver.AppleEFIRuntime          1.4.0
    com.apple.iokit.IOHIDFamily          1.6.5
    com.apple.iokit.IOSMBusFamily          1.1
    com.apple.kext.AppleMatch          1.0.0d1
    com.apple.security.TMSafetyNet          6
    com.apple.driver.DiskImages          289
    com.apple.iokit.IOStorageFamily          1.6.2
    com.apple.driver.AppleACPIPlatform          1.3.5
    com.apple.iokit.IOPCIFamily          2.6
    com.apple.iokit.IOACPIFamily          1.3.0

    User Tips:  Kernel Panics
    About "You need to restart your computer" (kernel panic) messages

  • MacbookPro/Lion 10.7.5 - Kernel panic after idle time - Can log file help in narrowing the problem

    MacbookPro Lion 10.7.5 - My macbook pro panics when i hit any key after an idle time.
    I have disabled Sleep, I am usually connected to an external monitor and external keyboard.
    I have already tried (Cmd+Option+R+P) and re-installing OS in safe mode with Apple Support, but, the problem persists.
    Panic (system crashes) log:
      Source:    /Library/Logs/DiagnosticReports/Kernel_2013-04-27-093207_KAPILs-MacBook-Pro.pan ic
      Size:    9 KB (9,275 bytes)
      Last Modified:    29/04/13 12:59 PM
      Recent Contents:    Interval Since Last Panic Report:  9720 sec
    Panics Since Last Report:          1
    Anonymous UUID:                    CC17CCFF-11B4-4C5E-9AAF-5B6E2451277B
    Sat Apr 27 09:32:07 2013
    panic(cpu 0 caller 0xffffff80002c4794): Kernel trap at 0xffffff7f817355fb, type 14=page fault, registers:
    CR0: 0x000000008001003b, CR2: 0xffffff806a540628, CR3: 0x0000000000100000, CR4: 0x00000000001606e0
    RAX: 0xffffff7f81792320, RBX: 0x0000000000000000, RCX: 0x0000000000000000, RDX: 0x0000000000000008
    RSP: 0xffffff807ed4bc80, RBP: 0xffffff807ed4bcb0, RSI: 0xffffff800bf09000, RDI: 0xffffff806a64f000
    R8:  0x0000000000000000, R9:  0xffffff800bc95a80, R10: 0x8000000000100000, R11: 0xffffff80002dad00
    R12: 0xffffff806a64f1c8, R13: 0xffffff806a53e000, R14: 0xffffff800bf09000, R15: 0xffffff806a64f000
    RFL: 0x0000000000010286, RIP: 0xffffff7f817355fb, CS:  0x0000000000000008, SS:  0x0000000000000010
    CR2: 0xffffff806a540628, Error code: 0x0000000000000000, Faulting CPU: 0x0
    Backtrace (CPU 0), Frame : Return Address
    0xffffff807ed4b930 : 0xffffff8000220792
    0xffffff807ed4b9b0 : 0xffffff80002c4794
    0xffffff807ed4bb60 : 0xffffff80002da55d
    0xffffff807ed4bb80 : 0xffffff7f817355fb
    0xffffff807ed4bcb0 : 0xffffff7f81734de7
    0xffffff807ed4bce0 : 0xffffff7f817351bd
    0xffffff807ed4bd10 : 0xffffff7f80cea832
    0xffffff807ed4bd50 : 0xffffff7f817bd383
    0xffffff807ed4bda0 : 0xffffff7f817bf692
    0xffffff807ed4bde0 : 0xffffff7f817bf7c4
    0xffffff807ed4be20 : 0xffffff7f80cee4c5
    0xffffff807ed4be60 : 0xffffff7f80cee628
    0xffffff807ed4be90 : 0xffffff7f80cf1fd7
    0xffffff807ed4bef0 : 0xffffff800063d4d6
    0xffffff807ed4bf30 : 0xffffff800063c250
    0xffffff807ed4bf70 : 0xffffff800063c0f4
    0xffffff807ed4bfb0 : 0xffffff8000820057
          Kernel Extensions in backtrace:
             com.apple.iokit.IOGraphicsFamily(2.3.4)[D0A1F6BD-E66E-3DD8-9913-A3AB8746F422]@0 xffffff7f80cdf000->0xffffff7f80d17fff
                dependency: com.apple.iokit.IOPCIFamily(2.7)[5C23D598-58B2-3204-BC03-BC3C0F00BD32]@0xffffff 7f80889000
             com.apple.driver.AppleIntelFramebufferCapri(7.3.2)[5D02E509-F60D-3312-9C3C-AF47 D6622C85]@0xffffff7f817b2000->0xffffff7f8180ffff
                dependency: com.apple.iokit.IOACPIFamily(1.4)[19BAB11C-CE5E-3068-AD10-132019C59D6C]@0xfffff f7f807d4000
                dependency: com.apple.iokit.IOPCIFamily(2.7)[5C23D598-58B2-3204-BC03-BC3C0F00BD32]@0xffffff 7f80889000
                dependency: com.apple.iokit.IOGraphicsFamily(2.3.4)[D0A1F6BD-E66E-3DD8-9913-A3AB8746F422]@0 xffffff7f80cdf000
             com.apple.driver.AppleIntelHD4000Graphics(7.3.2)[AD64F3E5-2838-3046-A9EA-1CB6C9 769436]@0xffffff7f81732000->0xffffff7f81798fff
                dependency: com.apple.iokit.IOPCIFamily(2.7)[5C23D598-58B2-3204-BC03-BC3C0F00BD32]@0xffffff 7f80889000
                dependency: com.apple.iokit.IONDRVSupport(2.3.4)[7C8672C4-8B0D-3CCF-A79A-23C62E90F895]@0xff ffff7f80d18000
                dependency: com.apple.iokit.IOGraphicsFamily(2.3.4)[D0A1F6BD-E66E-3DD8-9913-A3AB8746F422]@0 xffffff7f80cdf000
    BSD process name corresponding to current thread: kernel_task
    Mac OS version:
    11G63
    Kernel version:
    Darwin Kernel Version 11.4.2: Thu Aug 23 16:25:48 PDT 2012; root:xnu-1699.32.7~1/RELEASE_X86_64
    Kernel UUID: FF3BB088-60A4-349C-92EA-CA649C698CE5
    System model name: MacBookPro9,2 (Mac-6F01561E16C75D06)
    System uptime in nanoseconds: 15787869938998
    last loaded kext at 79222085916: com.apple.filesystems.smbfs    1.7.2 (addr 0xffffff7f807f7000, size 241664)
    last unloaded kext at 253257372652: com.apple.driver.AppleWWANSupport    2.5.4 (addr 0xffffff7f80c1a000, size 12288)
    loaded kexts:
    com.Symantec.kext.SAVAPComm    12.1
    com.apple.filesystems.smbfs    1.7.2
    com.apple.driver.AppleMikeyHIDDriver    122
    com.apple.driver.AGPM    100.12.75
    com.apple.driver.X86PlatformShim    5.0.0d8
    com.apple.driver.AppleHDA    2.2.5a5
    com.apple.driver.AppleUpstreamUserClient    3.5.9
    com.apple.driver.AppleMikeyDriver    2.2.5a5
    com.apple.driver.AudioAUUC    1.59
    com.apple.driver.AppleIntelHD4000Graphics    7.3.2
    com.apple.driver.SMCMotionSensor    3.0.2d6
    com.apple.driver.AppleSMCPDRC    5.0.0d8
    com.apple.iokit.IOUserEthernet    1.0.0d1
    com.apple.iokit.IOBluetoothSerialManager    4.0.8f17
    com.apple.driver.AppleSMCLMU    2.0.1d2
    com.apple.Dont_Steal_Mac_OS_X    7.0.0
    com.apple.driver.AudioIPCDriver    1.2.3
    com.apple.driver.ApplePolicyControl    3.1.33
    com.apple.driver.AppleLPC    1.6.0
    com.apple.driver.AppleBacklight    170.2.2
    com.apple.driver.AppleMCCSControl    1.0.33
    com.apple.driver.AppleIntelFramebufferCapri    7.3.2
    com.apple.filesystems.autofs    3.0
    com.apple.driver.AppleUSBTCButtons    227.6
    com.apple.driver.BroadcomUSBBluetoothHCIController    4.0.8f17
    com.apple.driver.AppleUSBTCKeyboard    227.6
    com.apple.driver.AppleIRController    312
    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless    1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib    1.0.0d1
    com.apple.BootCache    33
    com.apple.iokit.SCSITaskUserClient    3.2.1
    com.apple.driver.XsanFilter    404
    com.apple.iokit.IOAHCISerialATAPI    2.0.3
    com.apple.iokit.IOAHCIBlockStorage    2.1.0
    com.apple.driver.AppleSDXC    1.2.2
    com.apple.iokit.AppleBCM5701Ethernet    3.2.4b8
    com.apple.driver.AppleUSBHub    5.1.0
    com.apple.driver.AppleFWOHCI    4.9.0
    com.apple.driver.AirPort.Brcm4331    561.7.22
    com.apple.driver.AppleEFINVRAM    1.6.1
    com.apple.driver.AppleSmartBatteryManager    161.0.0
    com.apple.driver.AppleAHCIPort    2.3.1
    com.apple.driver.AppleUSBEHCI    5.1.0
    com.apple.driver.AppleRTC    1.5
    com.apple.driver.AppleUSBXHCI    1.1.0
    com.apple.driver.AppleACPIButtons    1.5
    com.apple.driver.AppleHPET    1.7
    com.apple.driver.AppleSMBIOS    1.9
    com.apple.driver.AppleACPIEC    1.5
    com.apple.driver.AppleAPIC    1.6
    com.apple.driver.AppleIntelCPUPowerManagementClient    195.0.0
    com.apple.nke.applicationfirewall    3.2.30
    com.apple.security.quarantine    1.4
    com.apple.security.TMSafetyNet    8
    com.apple.driver.AppleIntelCPUPowerManagement    195.0.0
    com.apple.driver.DspFuncLib    2.2.5a5
    com.apple.iokit.IOSurface    80.0.2
    com.apple.iokit.IOSerialFamily    10.0.5
    com.apple.iokit.IOFireWireIP    2.2.5
    com.apple.driver.AppleHDAController    2.2.5a5
    com.apple.iokit.IOHDAFamily    2.2.5a5
    com.apple.iokit.IOAudioFamily    1.8.6fc18
    com.apple.kext.OSvKernDSPLib    1.3
    com.apple.driver.AppleSMBusPCI    1.0.10d0
    com.apple.driver.X86PlatformPlugin    5.1.1d6
    com.apple.driver.AppleSMC    3.1.3d10
    com.apple.driver.IOPlatformPluginFamily    5.1.1d6
    com.apple.driver.AppleGraphicsControl    3.1.33
    com.apple.driver.AppleBacklightExpert    1.0.4
    com.apple.iokit.IONDRVSupport    2.3.4
    com.apple.driver.AppleSMBusController    1.0.10d0
    com.apple.iokit.IOGraphicsFamily    2.3.4
    com.apple.kext.triggers    1.0
    com.apple.driver.AppleUSBBluetoothHCIController    4.0.8f17
    com.apple.iokit.IOBluetoothFamily    4.0.8f17
    com.apple.driver.AppleUSBMultitouch    230.5
    com.apple.driver.AppleThunderboltDPInAdapter    1.8.5
    com.apple.driver.AppleThunderboltDPAdapterFamily    1.8.5
    com.apple.driver.AppleThunderboltPCIDownAdapter    1.2.5
    com.apple.iokit.IOUSBHIDDriver    5.0.0
    com.apple.driver.AppleUSBMergeNub    5.1.0
    com.apple.driver.AppleUSBComposite    5.0.0
    com.apple.iokit.IOSCSIMultimediaCommandsDevice    3.2.1
    com.apple.iokit.IOBDStorageFamily    1.7
    com.apple.iokit.IODVDStorageFamily    1.7.1
    com.apple.iokit.IOCDStorageFamily    1.7.1
    com.apple.iokit.IOSCSIArchitectureModelFamily    3.2.1
    com.apple.driver.AppleThunderboltNHI    1.6.0
    com.apple.iokit.IOThunderboltFamily    2.0.3
    com.apple.iokit.IOEthernetAVBController    1.0.1b1
    com.apple.iokit.IOUSBUserClient    5.0.0
    com.apple.iokit.IOFireWireFamily    4.4.8
    com.apple.iokit.IO80211Family    420.3
    com.apple.iokit.IONetworkingFamily    2.1
    com.apple.iokit.IOAHCIFamily    2.0.8
    com.apple.iokit.IOUSBFamily    5.1.0
    com.apple.driver.AppleEFIRuntime    1.6.1
    com.apple.iokit.IOHIDFamily    1.7.1
    com.apple.iokit.IOSMBusFamily    1.1
    com.apple.security.sandbox    177.8
    com.apple.kext.AppleMatch    1.0.0d1
    com.apple.driver.DiskImages    331.7
    com.apple.iokit.IOStorageFamily    1.7.2
    com.apple.driver.AppleKeyStore    28.18
    com.apple.driver.AppleACPIPlatform    1.5
    com.apple.iokit.IOPCIFamily    2.7
    com.apple.iokit.IOACPIFamily    1.4
    System Profile:
    Model: MacBookPro9,2, BootROM MBP91.00D3.B08, 2 processors, Intel Core i5, 2.5 GHz, 4 GB, SMC 2.2f38
    Graphics: Intel HD Graphics 4000, Intel HD Graphics 4000, Built-In, 384 MB
    Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1600 MHz, 0x80AD, 0x484D54333235533643465238432D50422020
    Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1600 MHz, 0x80AD, 0x484D54333235533643465238432D50422020
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xF5), Broadcom BCM43xx 1.0 (5.106.198.19.22)
    Bluetooth: Version 4.0.8f17, 2 service, 11 devices, 1 incoming serial ports
    Network Service: Wi-Fi, AirPort, en1
    Serial ATA Device: TOSHIBA MK5065GSXF, 500.11 GB
    Serial ATA Device: MATSHITADVD-R   UJ-8A8
    USB Device: hub_device, 0x8087  (Intel Corporation), 0x0024, 0x1a100000 / 2
    USB Device: FaceTime HD Camera (Built-in), apple_vendor_id, 0x8509, 0x1a110000 / 3
    USB Device: hub_device, 0x8087  (Intel Corporation), 0x0024, 0x1d100000 / 2
    USB Device: hub_device, 0x0424  (SMSC), 0x2513, 0x1d180000 / 3
    USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x1d182000 / 6
    USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0252, 0x1d183000 / 5
    USB Device: BRCM20702 Hub, 0x0a5c  (Broadcom Corp.), 0x4500, 0x1d181000 / 4
    USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x821d, 0x1d181300 / 8
    USB Device: composite_device, 0x413c  (Dell Inc.), 0x3010, 0x14100000 / 6
    USB Device: Dell USB Keyboard, 0x413c  (Dell Inc.), 0x2003, 0x14200000 / 5

    Since Norton modifies OS X your Mac is unable to function as designed.
    Kernel panics are caused by defective hardware or software. Norton is in the latter category.

  • Help with Script created to check log files.

    Hi,
    I have a program we use in our organization on multiple workstations that connect to a MS SQL 2005 database on a Virtual Microsoft 2008 r2 Server. The program is quite old and programmed around the days when serial connections were the most efficient means
    of connection to a device. If for any reason the network, virtual server or the SAN which the virtual server runs off have roughly 25% utilization or higher on its resources the program on the workstations timeout from the SQL database and drop the program
    from the database completely rendering it useless. The program does not have the smarts to resync itself to the SQL database and it just sits there with "connection failed" until human interaction. A simple restart of the program reconnects itself
    to the SQL database without any issues. This is fine when staff are onsite but the program runs on systems out of hours when the site is unmanned.
    The utilization of the server environment is more than sufficient if not it has double the recommended resources needed for the program. I am in regular contact with the support for the program and it is a known issue for them which i believe they do not
    have any desire to fix in the near future. 
    I wish to create a simple script that checks the log files on each workstation or server the program runs on and emails me if a specific word comes up in that log file. The word will only show when a connection failure has occurred.
    After the email is sent i wish for the script to close the program and reopen it to resync the connection.
    I will schedule the script to run ever 15 minutes.
    I have posted this up in a previous post about a month ago but i went on holidays over xmas and the post died from my lack or response.
    Below is what i have so far as my script. I have only completed the monitoring of the log file and the email portion of it. I had some help from a guy on this forum to get the script to where it is now. I know basic to intermediate scripting so sorry for my
    crudity if any.
    The program is called "wasteman2G" and the log file is located in \\servername\WasteMan2G\Config\DCS\DCS_IN\alert.txt
    I would like to get the email side of this script working first and then move on to getting the restart of the program running after.
    At the moment i am not receiving an error from the script. It runs and doesn't complete what it should.
    Could someone please help?
    Const strMailto = "[email protected]"
    Const strMailFrom = "[email protected]"
    Const strSMTPServer = "mrc1tpv002.XXXX.local"
    Const FileToRead = "\\Mrctpv005\WasteMan2G\Config\DCS\DCS_IN\alert.txt"
    arrTextToScanFor = Array("SVR2006","SVR2008")
    Set WshShell = WScript.CreateObject("WScript.Shell")
    Set objFSO = WScript.CreateObject("Scripting.FileSystemObject")
    Set oFile = objFSO.GetFile(FileToRead)
    dLastCreateDate = CDate(WshShell.RegRead("HKLM\Software\RDScripts\CheckTXTFile\CreateDate"))
    If oFile.DateCreated = dLastCreateDate Then
    intStartAtLine = CInt(WshShell.RegRead("HKLM\Software\RDScripts\CheckTXTFile\LastLineChecked"))
    Else
    intStartAtLine = 0
    End If
    i = 0
    Set objTextFile = oFile.OpenAsTextStream()
    Do While Not objTextFile.AtEndOfStream
    If i < intStartAtLine Then
    objTextFile.SkipLine
    Else
    strNextLine = objTextFile.Readline()
    For each strItem in arrTextToScanFor
    If InStr(LCase(strNextLine),LCase(strItem)) Then
    strResults = strNextLine & vbcrlf & strResults
    End If
    Next
    End If
    i = i + 1
    Loop
    objTextFile.close
    WshShell.RegWrite "HKLM\Software\RDScripts\CheckTXTFile\FileChecked", FileToRead, "REG_SZ"
    WshShell.RegWrite "HKLM\Software\RDScripts\CheckTXTFile\CreateDate", oFile.DateCreated, "REG_SZ"
    WshShell.RegWrite "HKLM\Software\RDScripts\CheckTXTFile\LastLineChecked", i, "REG_DWORD"
    WshShell.RegWrite "HKLM\Software\RDScripts\CheckTXTFile\LastScanned", Now, "REG_SZ"
    If strResults <> "" Then
    SendCDOMail strMailFrom,strMailto,"VPN Logfile scan alert",strResults,"","",strSMTPServer
    End If
    Function SendCDOMail( strFrom, strSendTo, strSubject, strMessage , strUser, strPassword, strSMTP )
    With CreateObject("CDO.Message")
    .Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/sendusing") = 2
    .Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/smtpserver") = strSMTP
    .Configuration.Fields.item("http://schemas.microsoft.com/cdo/configuration/smtpauthenticate") = 1 'basic
    .Configuration.Fields.item("http://schemas.microsoft.com/cdo/configuration/sendusername") = strUser
    .Configuration.Fields.item("http://schemas.microsoft.com/cdo/configuration/sendpassword") = strPassword
    .Configuration.Fields.Update
    .From = strFrom
    .To = strSendTo
    .Subject = strSubject
    .TextBody = strMessage
    On Error Resume Next
    .Send
    If Err.Number <> 0 Then
    WScript.Echo "SendMail Failed:" & Err.Description
    End If
    End With
    End Function

    Thankyou for that link, it did help quite a bit. What i wanted was to move it to csript so i could run the wscript.echo in commandline. It all took to long and found a way to complete it via Batch. I do have a problem with my script though and you might
    be able to help.
    What i am doing is searching the log file. Finding the specific words then outputting them to an email. I havent used bmail before so thats probably my problem but then im using bmail to send me the results.
    Then im clearing the log file so the next day it is empty so that when i search it every 15 minutes its clean and only when an error occurs it will email me.
    Could you help me send the output via email using bmail or blat?
    @echo off
    echo Wasteman Logfile checker
    echo Created by: Reece Vellios
    echo Date: 08/01/2014
    findstr "SRV2006 & SRV2008" \\Mrctpv005\WasteMan2G\Config\DCS\DCS_IN\Alert.Txt > c:\log4mail.txt
    if %errorlevel%==0 C:\Documents and Settings\rvellios\Desktop\DCS Checker\bmail.exe -s mrc1tpv002.xxx.local -t [email protected] -f [email protected] -h -a "Process Dump" -m c:\log4mail.txt -c
    for %%G in (\\Mrctpv005\WasteMan2G\Config\DCS\DCS_IN\Alert.Txt) do (copy /Y nul "%%G")
    This the working script without bmail
    @echo off
    echo Wasteman Logfile checker
    echo Created by: Reece Vellios
    echo Date: 08/01/2014
    findstr "SRV2006 & SRV2008" \\Mrctpv005\WasteMan2G\Config\DCS\DCS_IN\Alert.Txt > C:\log4mail.txt
    if %errorlevel%==0 (echo Connection error)
    for %%G in (\\Mrctpv005\WasteMan2G\Config\DCS\DCS_IN\Alert.Txt) do (copy /Y nul "%%G")
    I need to make this happen:
    If error occurs at "%errorlevel%=0" then it will output the c:\log4mail.txt via smtp email using bmail.

  • Help on printing error messages to a log file

    Hi, may I know whether is there any way to print the error messages to a log file? Thanks for your help!

    noobboy,
    Please refrain from crossposting all of your questions into multiple forums. You were asked to stop this the last time you did this as well. Please be more considerate in future.

  • Help! SQL server database log file increasing enormously

    I have 5 SSIS jobs running in sql server job agent and some of them are pulling transactional data into our database over the interval of 4 hours frequently. The problem is log file of our database is growing rapidly which means in a day, it eats up 160GB of
    disk space. Since our requirement dont need In-point recovery, so I set the recovery model to SIMPLE, eventhough I set it to SIMPLE, the log
    data consumes more than 160GB in a day. Because of disk full, the scheduled jobs getting failed often.Temporarily I am doing DETACH approach
    to cleanup the log.
    FYI: All the SSIS packages in the job is using Transaction on
    some tasks. for eg. Sequence Cointainer
    I want a permanent solution to keep log file in a particular memory limit and as I said earlier I dont want my log data for future In-Point recovery, so no need to take log backup at all.
    And one more problem is that in our database,the transactional table has 10 million records in it and some master tables have over 1000 records on them but our mdf file
    size is about 50 GB now.I dont believe that this 10 million records should make it to 50GB memory consumption.Whats the problem here?
    Help me on these issues. Thanks in advance.

    And one more problem is that in our database,the transactional table has 10 million records in it and some master tables have over 1000 records on them but our mdf file
    size is about 50 GB now.I dont believe that this 10 million records should make it to 50GB memory consumption.Whats the problem here?
    Help me on these issues.
    For SSIS part of question it would be better if you ask in SSIS forum although noting is going to change about logging behavior. You can increase some space on log file and also should batch your transactions as already suggested
    Regarding memory question about SQL Server, once it utilizes memory is not going to release unless there is windows OS faces memory pressure and SQLOS asks SQL Server to trim down its memory consumption. So again if you have set max server memory to some
    where near 50 SQL Server will utilize that much memory eventually. So what you are seeing is totally normal. Remember its costtly task for SQL Server to release and take memory so it avoids it by caching as much as possible plus it caches more so as to avoid
    physical reads which are costly
    When log file is getting full what does below transaction return
    select log_reuse_wait_desc from sys.databases where name='db_name'
    Can you manually introduce chekpoint in ETL query. Try this it might help you
    Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
    My Technet Wiki Article
    MVP

  • 500 Internal Server Error again pleas (including log file)..please help

    1. After i unziped and installed jdeveloper to:
    C:\Jdevstudio successfully
    2. Then i created the untitled1.jsp page ---> only showed Hello world and save
    3. the Embedded OC4J Server compiled successfully ..i thought this meant nothing wrong with the code.
    Successful compilation:0 errors, 0 warnings..
    4. But when i looked into the Embedded OC4J Server-Log
    i found the error :
    [Starting OC4J using the following ports: HTTP=8988, RMI=23891, JMS=9227.]
    C:\Jdevstudio\jdev\system\oracle.j2ee.10.1.3.39.84\embedded-oc4j\config>
    C:\Jdevstudio\jdk\bin\javaw.exe -client -classpath C:\Jdevstudio\j2ee\home\oc4j.jar;C:\Jdevstudio\jdev\lib\jdev-oc4j-embedded.jar -Dhttp.proxyHost=wwwcache.aber.ac.uk -Dhttp.proxyPort=8080 -Dhttp.nonProxyHosts=*.aber.ac.uk|localhost|127.0.0.1|win2006 -Dhttps.proxyHost=wwwcache.aber.ac.uk -Dhttps.proxyPort=8080 -Dhttps.nonProxyHosts=*.aber.ac.uk|localhost|127.0.0.1|win2006 -Xverify:none -DcheckForUpdates=adminClientOnly -Doracle.application.environment=development -Doracle.j2ee.dont.use.memory.archive=true -Doracle.j2ee.http.socket.timeout=500 -Doc4j.jms.usePersistenceLockFiles=false oracle.oc4j.loader.boot.BootStrap -config C:\Jdevstudio\jdev\system\oracle.j2ee.10.1.3.39.84\embedded-oc4j\config\server.xml
    [waiting for the server to complete its initialization...]
    14 ส.ค. 2551 15:30:33 com.evermind.server.XMLDataSourcesConfig parseRootNode
    INFO: Legacy datasource detected...attempting to convert to new syntax.
    14 ส.ค. 2551 15:30:34 com.evermind.server.jms.JMSMessages log
    INFO: JMSServer[]: OC4J JMS server recovering transactions (commit 0) (rollback 0) (prepared 0).
    14 ส.ค. 2551 15:30:34 com.evermind.server.jms.JMSMessages log
    INFO: JMSServer[]: OC4J JMS server recovering local transactions Queue[jms/Oc4jJmsExceptionQueue].
    Ready message received from Oc4jNotifier.
    Embedded OC4J startup time: 7813 ms.
    Target URL -- http://144.124.120.45:8988/Application1-view-context-root/faces/untitled1.jsp
    51/08/14 15:30:38 Oracle Containers for J2EE 10g (10.1.3.1.0) initialized
    This caused 500 Internal Server error
    5. Then i went to Tools--> Preferences--> Deployment--> unchecked Bundle Default data-source.xml During Deployment...
    I got less error showing:
    C:\Jdevstudio\jdk\bin\javaw.exe -jar C:\Jdevstudio\j2ee\home\admin.jar ormi://144.124.120.45:23891 oc4jadmin **** -updateConfig
    14 ส.ค. 2551 15:33:58 com.oracle.corba.ee.impl.orb.ORBServerExtensionProviderImpl preInitApplicationServer
    WARNING: ORB ignoring configuration changes. Restart OC4J to apply new ORB configuration.
    Ready message received from Oc4jNotifier.
    Embedded OC4J startup time: 8109 ms.
    Target URL -- http://144.124.120.45:8988/Application1-view-context-root/faces/untitled1.jsp
    This still caused 500 Internal Server Error
    6. I still did know the real problems then i read the installation guide of jdev
    is it necessary to set the JavaHome in C:\Jdevstudio\jdev\bin\jdev.conf
    or do i need to set ORACLEHome in this file
    7. from the log file the server called Jdk under Jdevstudio\jdk\bin\javaw.exe -jar
    it seemed fine...
    8. Anything wrong with admin.jar....
    9. is the problem from setting not setting jdk (javahome) or admin.jar...or OC4J problems please help
    i would appreciate you help
    thank you

    i deleted pesistence directory like what you said but i found the bigger error in the log ...
    [Starting OC4J using the following ports: HTTP=8988, RMI=23891, JMS=9227.]
    C:\Jdevstudio\jdev\system\oracle.j2ee.10.1.3.39.84\embedded-oc4j\config>
    C:\Jdevstudio\jdk\bin\javaw.exe -client -classpath C:\Jdevstudio\j2ee\home\oc4j.jar;C:\Jdevstudio\jdev\lib\jdev-oc4j-embedded.jar -Dhttp.proxyHost=wwwcache.aber.ac.uk -Dhttp.proxyPort=8080 -Dhttp.nonProxyHosts=*.aber.ac.uk|localhost|127.0.0.1|win2006 -Dhttps.proxyHost=wwwcache.aber.ac.uk -Dhttps.proxyPort=8080 -Dhttps.nonProxyHosts=*.aber.ac.uk|localhost|127.0.0.1|win2006 -Xverify:none -DcheckForUpdates=adminClientOnly -Doracle.application.environment=development -Doracle.j2ee.dont.use.memory.archive=true -Doracle.j2ee.http.socket.timeout=500 -Doc4j.jms.usePersistenceLockFiles=false oracle.oc4j.loader.boot.BootStrap -config C:\Jdevstudio\jdev\system\oracle.j2ee.10.1.3.39.84\embedded-oc4j\config\server.xml
    [waiting for the server to complete its initialization...]
    14 ส.ค. 2551 17:05:46 com.evermind.server.jms.JMSMessages log
    SEVERE: Failed to set the internal configuration of the OC4J JMS Server with: XMLJMSServerConfig[file:/C:/Jdevstudio/jdev/system/oracle.j2ee.10.1.3.39.84/embedded-oc4j/config/jms.xml]
    java.lang.InstantiationException: The system cannot find the path specified
         at com.evermind.server.jms.JMSUtils.make(JMSUtils.java:1072)
         at com.evermind.server.jms.JMSUtils.toInstantiationException(JMSUtils.java:1237)
         at com.evermind.server.jms.JMSServer.recoverState(JMSServer.java:1831)
         at com.evermind.server.jms.JMSServer.internalSetConfig(JMSServer.java:209)
         at com.evermind.server.jms.JMSServer.setConfig(JMSServer.java:182)
         at com.evermind.server.ApplicationServer.initializeJMS(ApplicationServer.java:2412)
         at com.evermind.server.ApplicationServer.setConfig(ApplicationServer.java:955)
         at com.evermind.server.ApplicationServerLauncher.run(ApplicationServerLauncher.java:131)
         at java.lang.Thread.run(Thread.java:595)
    Caused by: java.io.IOException: The system cannot find the path specified
         at java.io.WinNTFileSystem.createFileExclusively(Native Method)
         at java.io.File.createNewFile(File.java:850)
         at com.evermind.server.jms.ServerFile.safeOpenFile(ServerFile.java:775)
         at com.evermind.server.jms.ServerFile.access$000(ServerFile.java:77)
         at com.evermind.server.jms.ServerFile$2.run(ServerFile.java:719)
         at oracle.oc4j.security.OC4JSecurity.doUnprivileged(OC4JSecurity.java:325)
         at com.evermind.server.jms.ServerFile.openFile(ServerFile.java:716)
         at com.evermind.server.jms.ServerFile.<init>(ServerFile.java:133)
         at com.evermind.server.jms.PersistentMap.loadFile(PersistentMap.java:100)
         at com.evermind.server.jms.PersistentMap.<init>(PersistentMap.java:61)
         at com.evermind.server.jms.JMSServer.recoverState(JMSServer.java:1823)
         ... 6 more
    51/08/14 17:05:46 *** (SEVERE) Failed to set the internal configuration of the OC4J JMS Server with: XMLJMSServerConfig[file:/C:/Jdevstudio/jdev/system/oracle.j2ee.10.1.3.39.84/embedded-oc4j/config/jms.xml]
    14 ส.ค. 2551 17:05:46 com.evermind.server.ServerMessages severeJmsServerStartupException
    SEVERE: JMS: Failed to set the internal configuration of the OC4J JMS Server with: XMLJMSServerConfig[file:/C:/Jdevstudio/jdev/system/oracle.j2ee.10.1.3.39.84/embedded-oc4j/config/jms.xml]
    Ready message received from Oc4jNotifier.
    Embedded OC4J startup time: 7719 ms.
    Target URL -- http://144.124.120.45:8988/Application1-view-context-root/faces/untitled1.jsp
    51/08/14 17:05:50 Oracle Containers for J2EE 10g (10.1.3.1.0) initialized
    anything problems that came from admin.jar..????

  • Where yo find reporting services log files in sharepoint 2013 integrated mode

    i use to find the reporting services log files in the msrs folder in sharepoin 2010 integrated mode. but when we migrated to sharepoint 2013. i am not able to find the logs.i wanted to check all the executed sql statement using the logs as we don't have
    access to sql server profiler. does anybody know the location of yhe logs?

    Hi there,
    Not sure you'll see the sql statements however you can find information on the ULS logs here:
    http://technet.microsoft.com/en-us/library/cc627510(v=sql.105).aspx
    http://technet.microsoft.com/en-us/library/ff487871(v=sql.105).aspx
    and here:
    http://technet.microsoft.com/en-us/library/ms156500(v=sql.105).aspx
    You might want this once ULS log is capturing info.
    http://archive.msdn.microsoft.com/ULSViewer
    cheers,
    Andrew
    Andrew Sears, T4G Limited, http://www.performancepointing.com

  • Locum error in log file ? HELP

    Hi.
    When i look in my log file i keep getting a log error ever 10-20 min ?
    It keeps comming.
    Feb 7 16:44:42 Mugge com.apple.launchd[118] (0x409b60.Locum[482]): Exited: Terminated
    Feb 7 16:46:55 Mugge com.apple.launchd[118] (0x4099f0.Locum[494]): Exited: Terminated
    Feb 7 16:48:21 Mugge com.apple.launchd[118] (0x4099a0.Locum[497]): Exited: Terminated
    Feb 7 16:50:53 Mugge com.apple.launchd[118] (0x4099f0.Locum[513]): Exited: Terminated
    Feb 7 16:51:23 Mugge com.apple.launchd[118] (0x408c90.Locum[520]): Exited: Terminated
    Feb 7 16:51:54 Mugge com.apple.launchd[118] (0x4099f0.Locum[523]): Exited: Terminated
    Feb 7 16:52:12 Mugge com.apple.launchd[118] (0x4099f0.Locum[525]): Exited: Terminated
    Feb 7 16:53:47 Mugge com.apple.launchd[118] (0x409800.Locum[530]): Exited: Terminated
    Feb 7 16:54:11 Mugge com.apple.launchd[118] (0x409800.Locum[532]): Exited: Terminated
    Feb 7 16:54:46 Mugge com.apple.launchd[118] (0x409800.Locum[536]): Exited:
    Feb 7 17:01:10 Mugge com.apple.launchd[118] (0x4098a0.Locum[569]): Exited: Terminated
    Feb 7 17:01:29 Mugge com.apple.launchd[118] (0x409870.Locum[571]): Exited: Terminated
    Feb 7 17:01:39 Mugge hdiejectd[580]: running
    Feb 7 17:01:59 Mugge com.apple.launchd[118] (0x40ac90.Locum[591]): Exited: Terminated
    Feb 7 17:19:01 Mugge com.apple.launchd[118] (0x409800.Locum[644]): Exited: Terminated
    Feb 7 17:19:06 Mugge com.apple.launchd[118] (0x409800.Locum[645]): Exited: Terminated
    Feb 7 17:19:10 Mugge com.apple.launchd[118] (0x409800.Locum[647]): Exited: Terminated
    Feb 7 17:21:58 Mugge com.apple.launchd[118] (0x40a780.Locum[772]): Exited: Terminated
    Feb 7 17:22:03 Mugge com.apple.launchd[118] (0x40a780.Locum[773]): Exited: Terminated
    Feb 7 16:51:28 mugge com.apple.launchd[118] (0x409790.Locum[929]): Exited: Terminated
    Feb 7 16:51:50 mugge com.apple.launchd[118] (0x409830.Locum[930]): Exited: Terminated
    Feb 7 16:52:11 mugge com.apple.launchd[118] (0x409830.Locum[937]): Exited: Terminated
    Anybody know what that means ?

    Locum is a program that helps Finder delete some files when you empty the Trash.
    It's normal to see that message in the log after the trash has been emptied. If it's showing up on its own every few minutes, I'd first try restarting the computer (in case something is causing Locum to launch), then try repairing permissions and restarting again.

  • Data Integrator build failure - could not open trace log file

    HI, this is regarding data integrator 11.5.  I have a job that failed trying to run a data flow with the below error.  Its run perfectly fine plenty of times in the past.  It looks like it just couldn't open the trace log file that it had been writing to...  anyone know what would cause this?  No one would have been opening or modifying that file during the job except for the job itself.  I was just wondering if anyone has run into this before.  I am sure it will work if I just
    (11.5) 03-27-08 02:05:20 (E) (1128:5536) RUN-050011: |Dataflow xMatter_Exception_Fee_Delta_DF
                                                         Error: .

    HI, this is regarding data integrator 11.5.  I have a job that failed trying to run a data flow with the below error.  Its run perfectly fine plenty of times in the past.  It looks like it just couldn't open the trace log file that it had been writing to...  anyone know what would cause this?  No one would have been opening or modifying that file during the job except for the job itself.  I was just wondering if anyone has run into this before.  I am sure it will work if I just
    (11.5) 03-27-08 02:05:20 (E) (1128:5536) RUN-050011: |Dataflow xMatter_Exception_Fee_Delta_DF
                                                         Error: .

  • How can maintain log file Please help Very Urgent.

    I am developping an application in PDK. From my application I need maintain a log file in the server side. Please help me how can I do this. If you do have links regarding this matter please pass it.

    You might want to use the SAP Logging API. see
    <a href="http://help.sap.com/saphelp_nw04s/helpdata/en/d2/5c830ca67fd842b2e87b0c341c64cd/frameset.htm">Logging and Tracing</a>
    In NWDS include a reference to logging.jar (use variable SAP_LOGGING_LIB_HOME).
    You can then write to the log in this way:
    public class Xyz {
         private static final Location TRACE = Location.getLocation(Xyz.class);
         // It is not nice to set the severity in static code - only for demonstration purposes.
         // For production-ready code this should be done via a log-configuration.xml
         // to allow configuration of the severity at runtime.
              TRACE.setEffectiveSeverity(Severity.ALL);
         public void myMethod() {
              final String METHOD = "myMethod()";
              TRACE.entering(METHOD);
              TRACE.debugT("whatever");
              TRACE.exiting(METHOD);

  • Need help to figure out default location of import log file

    I imported the dmp file using the following command
    $ imp <name>/<password> file=<pathname> FULL=Y
    I got the following message after completion
    "import terminatted sucessfully with warnings"
    Can anyone help me where the log files would be put and what could be the probable name of log file.
    Thanks in advance.
    Regards,
    Raj

    Thanks a lot. I reimported the database with the log file location part of imp command

  • Help creating DB with multiple Control/Log files

    I just installed 10.0.2.0 and tried to create a database and ran into the following issue. In my 9.2 install I have the following directory setup:
    E:\oracle\oradata\(instance name)
    F:\oracle\oradata\(instance name)
    G:\oracle\oradata\(instance name)
    I have three control files and three log files (1 in each directory). When I use the Database Creation Assistant and specify locations in the Multiplex Redo Log and Controlfiles dialog and then finish the assistant I get an error stating Oracle could not create the folder. I am using the following lines in the dialog.
    {ORACLE_BASE}\oradata\{DB_UNIQUE_NAME}\
    E:\oracle\product\10.2.0\oradata\{DB_UNIQUE_NAME}\
    F:\oracle\product\10.2.0\oradata\{DB_UNIQUE_NAME}\
    When I explore to F:\oracle\product\10.2.0\oradata\ there is a directory called {DB_UNIQUE_NAME} and not the database name I want (for example if I want an instance called RICK the control file would be in E:\oracle\product\10.2.0\oradata\RICK.
    In Oracle 9.2 I specify the locations as follows: E:\oracle\oradata\{DB_NAME}\ and it works just fine. Can someone help me through the exact steps I need to take to set up my new database with control/log files in different drives.
    Thanks
    Richard Anderson

    Hi Richard,
    normally I don't use DBCA to create DBs so I cannot tell how to solve it in DBCA.
    A workaround can be:
    At the end of configuration process in DBCA, instead to have the tool to generate Your DB, configure it to generate only the scripts (if I remeber they are created in $ORACLE_HOME/assistants/dbca dir) and generate them.
    Using a text editor, check the generated scripts and change the wrong strings.
    Hope this helps
    Max

  • Delay in event driven log file data writing? Please help!!!

    System Information
    Operating System: XP
    Labview: 8.2
    Force sensor data acquisition via DAQPad-6070E
    Actuator: Actuator via MCS-3D controller
    Programming Information
    Number of events: 13
    Position read: Reads the position and the force sensor data every second.
    Move I &  Forward:  Moves the actuator forward with a define step size
    Two actuators are made to travel certain distance. A force sensor is attached to the system. The aim here is to acquire continuous data as per the defined time wait (1 sec). The data is logged in a text file which gives the position travelled from the actuator, the force sensor data with a time stamp.
    The issues I am encountering is during writing a file.
    For ex: When even is activated ( Move actuator at defined stepsize) the event are logged into the log file but the positions are updated into the log file only when the next event is activated. So it means that the positions and the force values are updated into the logfile after the consecutive event is executed. If you see the logfile ex inside the attachment the red block explains the event executed but the position are updated in the next line (event). This file is just for example.
    Please help here I am going wrong!
    Thanks in advanced
    Attachments:
    EventMoveex.PNG ‏582 KB
    Logfile.PNG ‏64 KB

    Dear Method M
    I find it out what was going on. As you mentioned that I was writing the values before the actuators achieving the final position, so I introduced a delay between the execution of two SubVI's. It isnt a clean method but it works.
    thank you very much!
    Regards
    Itz

  • Can't login as an admin, log files are going nuts,HELP!

    The heart of the matter:
    1) About a year ago I realized my ASL log files were growing out of control (about 30gb right now)
    2) I d/led Omni DiskSweeper and Yasu
    3) I started using Yasu regularly and it seemed to keep things a lot cleaner
    4) Suddenly, out of nowwhere I started getting warnings again that my hd was full but
    I couldn't log in as an admin, it rejected the passwords I'd set years ago and I was unable to reset
    to a new password with the startup disk (the new password is never recognized when I reboot)
    5) Yasu completely stopped working, now every time I try to launch it it says
    "error dscl_cmd DS Error -1436 (eDSRecordNotFound (56)"
    I'm not that comfortable getting under the hood or using console. Is a complete reinstall the easiest/only fix? One more wrinkle I d/led MacKeeper recently but found it useless and irritating cause of my login issue so dumped it.
    Thanks so much!

    Regarding MacKeeper, make sure you remove all associated files ...
    To Completely Uninstall and Remove Zeobit's MacKeeper
    Download and Install AppCleaner
    Download and Install Find Any File
    Run AppCleaner
    Click on Applications
    Select MacKeeper
    Click on Search
    Select all results
    Click on Delete
    Run Find Any File
    Search for zeobit
    Select and Delete all results (except for those already in the Trash)
    Search for mackeeper
    Select and Delete all results (except for those already in the Trash)
    Open Up Keychain Access
    Search for zeobit
    Select and Delete all results
    Search for mackeeper
    Select and Delete all results
    Secure Empty Trash
    Reboot
    Unless you perform all of these steps, you'll have remnants of Zeobit's MacKeeper app. I had installed MacKeeper several weeks ago, when I had accidentally deleted some files on my Mac -- hoping to use their "undelete" feature. This was when my nightmare began. Even after using AppCleaner to remove it, there were still some background processes that were running every 10 seconds. While probably harmless, this adds unnnecessary strain on the Mac.
    The key was also using Find Any File and delete any entries in the Keychain Access.
    Download Links
    AppCleaner - http://appcleaner.en.softonic.com/mac
    Find Any File - http://www.macupdate.com/app/mac/30079/find-any-file
    I hope this helps!
    Frank

Maybe you are looking for

  • What is SSL/TLS in File adapter

    Hi Folks, I read the concept of SSL/TLS in help.sap.com But, still I not getting complete use of this.   Please explain me about how and when we have to use this option. Thanks, Rohini

  • Is it possible to use a keyboard sounds through midi on Logic 8?

    The thing that I'm asking, is to do it the opposite. I mean, you're able to use your midi controller such as M-Audio with the sounds from the software, for instance "Main Stage part of Logic Pro" , but I'm wandering If you Can do it the opposite way.

  • Apple TV stuck on commercials?

    When streaming content via the ABC Television application, the stream stops at the end of a commercial break and repeats the video and audio from the last 1 second. Fast forwarding past this point allows the show to continue, but this is very disrupt

  • Loadvars not working on external domain

    Hi, I have Domain1 that is hosting my flash .swf file, and Domain2 that is linking to that .swf file. In the flash file I have a; loadVars.send("another-domain.com", "_self", "POST"); command. When the flash file is placed anywhere on a page on Domai

  • CAF/VC Exception Handling

    Hello, I have a simple CE application, which stores data in a backend system and receives a ticket number. In case an error occures, the application service implementation catches the EJBException and throws a CAFServiceException. Unfortunately the g