OID in Linux

Our admin username "portal" password expired, and we need to change the expiration date in our Oracle Directory Manager/Oracle Internet Directory (OID). We are familiar with accessing OID in a Windows environment, but not sure how to do so in a Linux environment.
Is OID accessible using a IE browser (i.e., is there a special port) or is it somehow accessed in the back end?
We are using Oracle-Application-Server-10g/10.1.2.0.2 on Linux. Let us know if you have any ideas.

From the linux console - oidadmin
If you want to access via the web
http://infrastructureURL:port/oiddas

Similar Messages

  • Oidldapd service does not start for OID on LINUX

    Hi,
    I have installed OCS 9.0.3.0.0 on LINUX, all components i.e. Infrastructure, Storage and MiddleTier are installed properly (without giving any error). While trying to start OID with oidmon and oidctl (through command line), oidmon is started but OID is not available.
    Surprisingly oidldapd01.log file is not found (as log registers), where to locate this file ?
    OIDMON.LOG registers the following entries :
    2003/05/01:17:37:16Starting Monitor Process, PID=1374
    2003/05/01:17:37:16OIDLDAPD server terminated normally
    2003/05/01:17:37:16Check log file oidldapd01.log
    2003/05/01:17:37:16Deleting OIDLDAPD instance 1 from Process table
    2003/05/01:17:37:18OIDLDAPD Instance 1 deleted from registry
    2003/05/01:17:37:18ODISRV server terminated normally
    2003/05/01:17:37:18Check log file odisrv00.log
    2003/05/01:17:37:18Deleting ODISRV instance 1 from Process table
    2003/05/01:17:37:19ODISRV Instance 1 deleted from registry
    2003/05/01:17:41:40Updating Process Table...
    2003/05/01:17:41:40Starting OIDLDAPD Server, PID=1478
    2003/05/01:17:41:40Exec of OIDLDAPD Server failed with error=2
    2003/05/01:17:41:41OIDLDAPD Instance 1 added into registry
    2003/05/01:17:41:41Updating Process Table...
    2003/05/01:17:41:51OIDLDAPD server terminated normally
    2003/05/01:17:41:51Check log file oidldapd01.log
    2003/05/01:17:41:51Deleting OIDLDAPD instance 1 from Process table
    2003/05/01:17:41:52OIDLDAPD Instance 1 deleted from registry
    2003/05/01:18:10:15Updating Process Table...
    2003/05/01:18:10:15Starting OIDLDAPD Server, PID=1620
    2003/05/01:18:10:15Exec of OIDLDAPD Server failed with error=2
    2003/05/01:18:10:15OIDLDAPD Instance 1 added into registry
    2003/05/01:18:10:15Updating Process Table...
    2003/05/01:18:10:25OIDLDAPD server terminated normally
    2003/05/01:18:10:25Check log file oidldapd01.log
    2003/05/01:18:10:25Deleting OIDLDAPD instance 1 from Process table
    2003/05/01:18:10:27OIDLDAPD Instance 1 deleted from registry
    Any help ?
    Regards
    Ashwani

    Hi Manuel,
    I tested on my client, and I also keep getting the error 1053, which indicates timeout and the new created service can not be started during the limit time, so you can try to change the service time limit, please note this needs to change registry value,
    Using Registry Editor incorrectly can cause serious problems:
    In Registry Editor, locate, and then right-click the following registry subkey:
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control
    a.Point to New, and then click DWORD Value. In the right pane of Registry Editor, notice that New Value #1 (the name of a new registry entry) is selected for editing.
    b.Type ServicesPipeTimeout to replace New Value #1, and then press ENTER.
    c.Right-click the ServicesPipeTimeout registry entry that you created in step c, and then click Modify. The Edit DWORD Value dialog box appears.
    d.In the Value data text box, type TimeoutPeriod, and then click OK
    Refer to:
    Error 1053: The service did not respond to the
    start or control request in a timely fashion - When trying to start the server service.
    Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
    If there is anything else regarding this issue, please feel free to post back.
    Best Regards,
    Anna Wang

  • Ask help for OID on Linux

    I installed OID which come from the download version of Oracle 8i 8.1.7 on redhat linux 6.2. I use universal installer installed the software code and run postcfg script in $ORACLE_HOME/ldap/postcfg to generate the database and LDAP schema. After correct some
    bugs manually in the postcfg(it is better to add one sentence of oidmon -start) and bugs in oidadmin(script in $ORACLE_HOME/bin, one is it point to a wrong place of jre, the other is it use a switch that only worked on sparc), I finally started the oidadmin.
    BUT, I still can not login the OID from oidadmin. Can any guy kind give me some info on what is the initial password for oidadmin of OID? I have tried all combos that listed on the on-line help, like: cn=orcladmin, oracladmin, etc. it doesn't work. I also use sqlplus as system to search it in the tables
    of the OID database, but find nothing.
    Thanks for any info or hint!
    null

    Hello:
    Sorry it took so long to respond to your question. I was exhibiting OID at AppsWorld in Paris and New Orleans for the past 2 weeks.
    Assuming you have followed the installation procedures from the "OID Installation Guide" there is one small bug patch that needs to be applied to the Linux versions. You can obtain a copy of this patch from the Oracle Metalinks web site:
    http://www.oracle.com/support/metalink/index.html
    Assuming that OID is up and running you should be able to start a gui JAVA tool from the command line prompt by typing in "oidamdin" or from your Linux Window console. The super user account name is "orcladmin" and the default password is "welcome". The default port number is 389. Also make sure you put in the host name of your machine.
    Let me know if any of this helps. If not Ill try to help you reinstall OID to make sure it is installed properly. I am unable to fully understand where you are stuck from your description of the problem.
    thanks,
    Jay
    null

  • 11g install OID on linux x64 error

    Hi all,
    I'm try to install OID/OVD 11g on SuSe Linux 10 SP2+ x64. When OUI try to start Oracle Internet Directory the install process failed.
    The log OID dump show me this:
    Dumping stack trace for OIDMON ...
    calling caller argument values in hex
    location (? means dubious value)
    gslusdsDumpStack() 00002B3F8C6DFC30 arg#1: ???? value=215CFD98 (ptr)
    arg#2: ???? value=215CC170 (ptr)
    arg#3: ???? value=215CD688 (ptr)
    arg#4: ???? value=215CD750 (ptr)
    arg#5: ???? value=215CFD98 (ptr)
    arg#6: ???? value=00000001 (ptr)
    00002B3F8C6DFC30 gslduudSetDBparams()+1333 arg#1: ???? value=00000020 (ptr)
    arg#2: ???? value=215D07E0 (ptr)
    arg#3: ???? value=00000000 (ptr)
    arg#4: ???? value=00000001 (ptr)
    arg#5: ???? value=10000000 (ptr)
    arg#6: ???? value=00000002 (ptr)
    gslduudSetDBparams()gsdsiConnect()+2107 arg#1: ???? value=8CF6B010 (ptr)
    arg#2: ???? value=215D07E0 (ptr)
    arg#3: ???? value=00000000 (ptr)
    arg#4: ???? value=00000001 (ptr)
    arg#5: ???? value=10000000 (ptr)
    arg#6: ???? value=00000002 (ptr)
    gsdsiConnect() gslsgcAConDB()+159 arg#1: ???? value=004414A4 (ptr)
    arg#2: ???? value=8CDA80B8 (ptr)
    arg#3: ???? value=00000000 (ptr)
    arg#4: ???? value=00000001 (ptr)
    arg#5: ???? value=10000000 (ptr)
    arg#6: ???? value=00000002 (ptr)
    gslsgcAConDB() gslmmonMain()+2671 arg#1: ???? value=8CDA8010 (ptr)
    arg#2: ???? value=215D1E48 (ptr)
    arg#3: ???? value=00000000 (ptr)
    arg#4: ???? value=00000001 (ptr)
    arg#5: ???? value=10000000 (ptr)
    arg#6: ???? value=00000002 (ptr)
    gslmmonMain() main()+202 arg#1: ???? value=8CDA8010 (ptr)
    arg#2: ???? value=00000000 (ptr)
    arg#3: ???? value=00000000 (ptr)
    arg#4: ???? value=00000000 (ptr)
    arg#5: ???? value=00000000 (ptr)
    arg#6: ???? value=0000000A (ptr)
    main() __libc_start_main()+244 arg#1: ???? value=00000003 (ptr)
    arg#2: ???? value=215D2338 (ptr)
    arg#3: ???? value=215D2358 (ptr)
    arg#4: ???? value=00000000 (ptr)
    arg#5: ???? value=00000000 (ptr)
    arg#6: ???? value=0000000A (ptr)
    __libc_start_main() _start()+41              arg#1: ???? value=00415898 (ptr)
    arg#2: ???? value=00000003 (ptr)
    arg#3: ???? value=215D2338 (ptr)
    arg#4: ???? value=00000000 (ptr)
    arg#5: ???? value=00000000 (ptr)
    arg#6: ???? value=00000003 (ptr)
    Dumping stack trace of other threads ...
    I check all prereqs and install OID/OVD on anothers 5 machines with SuSe Linux 10 SP2+ x64, but in this machine only show me error.
    Someone have a good idea?
    Thanks in advance,
    Carlos

    Hi,
    I have the same problem,
    what was the error in the database installation?
    Thanks.

  • OID on Linux (Intel)?

    Im running 8i on RedHat 6.2 and couldnt find a version of OID in my install. Is it available for linux?
    John
    [email protected]

    Hello John:
    OiD is available for Linix on Oracle 8i release 2 which is the same thing as Oracle 8i version 8.1.6
    Oracle 8i release 1 is version 8.1.5 and we did not port to Linix on this version.
    We will be releasing OiD on 8i release 3 (version 8.1.7) within the next few weeks.
    Oracle currently plans to release OiD on every new release of the database for Linix.
    OiD is also going to be bundled with future releases of the 9i Application Server on Linix as well.
    To recap. Your choices for OiD on Linix are as follow: Oracle 8.1.6 (release 2), or wait a week or two for our newest release on Linix, Oracle 8.1.7 (release 3.)
    Thanks,
    Jay
    null

  • Re-install OID in Linux

    Hi,
    Yesterday i having problem with my oid. So i want to re-install oid. But an error said i already register in database. So, how to remove from database? Other thing, i'm not create backup for directory oid.
    MzarM.

    Deregister manually: on the infrastructure server, run:
    deconfig.pl -u cn=orcladmin -w <psw of orcladmin> -dbp <psw of SYS>
    Mind you: user id must be cn=ocrladmin, or else you'll get javax.naming.AuthenticationException: [LDAP: error code 49 - Invalid Credentials]
    Now you should be able to choose the "deregister and remove" option in MRCA.
    I really liked the Re-installation chapter of the 10.1.4 manual:
    "The installer does not allow reinstallation of an Oracle Application Server instance in a directory that already contains an Oracle Application Server instance.
    To reinstall Oracle Application Server in the same directory, you have to deinstall and then install it."

  • OID on AIX or Linux

    I am trying to find out what people's general experience is with OID on AIX. We are in the design phase for building a new OID for our main database and using AIX would be easier for us.
    However Linux appears to be the most popular platform for OID. Does anyone out there have experience with both platforms and if so have you encountered any issues with using AIX compared to Linux?
    Also it would be great if some kind soul could let me know roughly how big the user base is for running OID on AIX compared to OID on Linux. We don't want to be one of a select few with a particular configuration.
    We are planning to use OID / OIM 10.1.4
    Thanks for any advice you can give.

    In my experience, oid on redhat runs the fastest. User bases range for our clients from 100 to 50,000. Also, upgrades will come out on linux faster than aix, since it's getting to be a less used OS. Just my thoughts.

  • OID/Linux and Netsacpe Java SDK don't play nice

    Here's a brief description of the problem. We are developing with the Netscape LDAP SDK for Java connecting to OID on Linux and deploying on Solaris. The problem I'm discussing here doesn't happen on Solaris. All access to the LDAP server is being funelled through one connection (please don't ask, I didn't design it).
    Lets call an add, modify, delete or read an "action," for the sake of convenience. When an ldapjdk.jar client connects to an OID server, it can perform 32764 "actions." On the 32765th, it blocks forever waiting for OID server to return. Ok, the obvious solution is to implement a timeout and try again. Did that and it doesn't work. Ok, lets try dropping the connection at a watermark (say 30000 actions) and establishing a new one. Nope, still doesn't work. At the 32765 actions per client machine mark, it blocks forever.
    Dumping the threads on the client side gives us something like the following:
    main:
    [1] java.lang.Object.wait (native method)
    [2] java.lang.Object.wait (Object.java:424)
    [3] netscape.ldap.LDAPMessageQueue.waitForMessage (LDAPMessageQueue.java:179)
    [4] netscape.ldap.LDAPMessageQueue.nextMessage (LDAPMessageQueue.java:101)
    [5] netscape.ldap.LDAPSearchListener.nextMessage (LDAPSearchListener.java:86)
    [6] netscape.ldap.LDAPConnection.search (LDAPConnection.java:2584)
    [7] netscape.ldap.LDAPConnection.read (LDAPConnection.java:2104)
    [8] netscape.ldap.LDAPConnection.read (LDAPConnection.java:2098)
    [9] ReadLockTest.run_test (ReadLockTest.java:96)
    [10] ReadLockTest.run (ReadLockTest.java:49)
    [11] ReadLockTest.main (ReadLockTest.java:25)
    LDAPConnThread chakotay:389:
    [1] java.net.SocketInputStream.socketRead (native method)
    [2] java.net.SocketInputStream.read (SocketInputStream.java:90)
    [3] java.io.BufferedInputStream.fill (BufferedInputStream.java:190)
    [4] java.io.BufferedInputStream.read (BufferedInputStream.java:208)
    [5] netscape.ldap.ber.stream.BERElement.getElement (BERElement.java:101)
    [6] netscape.ldap.LDAPConnThread.run (LDAPConnThread.java:420)
    Not much help there. I turned on all debugging on the OID server and got massive amounts of data back (and the server slowed to a crawl. :-] ). They all show the choke happening after gsldfb_FetchBaseObjs, and before leaving gslfcfdRefreshRootDSE. The last request (the 32765th) has started, but
    never completes. I can provide parts of the logs on request.
    Has anyone else encountered this problem?
    Thanks.
    Glenn McAllister
    SOMA Networks, Inc.

    Hello Glen:
    I have not seen this before. Sounds like you have done a thorough job troubleshooting this and this may be a bug. If you are able, I would like you to file a trouble report at our Oracle Support web site:
    http://www.oracle.com/support/metalink/index.html
    Thanks,
    Jay
    null

  • Patch Needed for Windows 64 bit OS for bug number - 9356752 ...OID 11.1.1.6

    Hi,
    I m doing OID - OAM integration for SSO.
    OID 11.1.1.6 (64 bit)
    RCU 11.1.1.6 (64 bit)
    Oracle DB 11.2.0.3 (64 bit)
    Weblogic Server 10.3.6
    While installing OID 11.1.1.6
    I m getting error during configuration as
    [2013-01-19T13:40:42.723+05:30] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 19] [ecid: 0000JlHnUopFk3WFLzvH8A1Gy^Jk00000A,0] Trying to start the component oid1
    [2013-01-19T13:40:42.855+05:30] [as] [WARNING] [] [oracle.as.config] [tid: 19] [ecid: 0000JlHnUopFk3WFLzvH8A1Gy^Jk00000A,0] Failed to start component oid1[[
    oracle.as.config.ProvisionException: HTTP status code = 400 : The request parameters did not match any components
         at oracle.as.config.impl.OracleASComponentBaseImpl.manageProcess(OracleASComponentBaseImpl.java:943)
         at oracle.as.config.impl.OracleASComponentBaseImpl.start(OracleASComponentBaseImpl.java:1062
    I searched through oracle support ..I got a patch for this issue (bug number 9356752) but its for Linux and Solaris.
    Can I get the patch for Windows 64 bit OS or any solution to resolve this issue?
    Thanks and Regards,
    Yogesh

    Hi,
    I have faced the same issue when I was installing OID in linux server, but was able to fix the issue with right version of RCU ( I was using RCU 11.1.1.5 with OID 11.1.1.6).
    Regards,
    Raghav

  • OID Installation Document

    Can anybody provide me the installation guide for oracle 11g OID on linux 64bit (no SPARC) platform .
    I searched in oracle site but could find the relavent one. There are lot of document , got confused.
    I just need the installation guide for prerequisites check.

    Hi user;
    If you mention Oracle Internet Directory (OID) please refer below link:
    http://wiki.oracle.com/page/Installing+Oracle+Internet+Directory+(OID)+for+Names+Migration
    http://download.oracle.com/docs/html/A87557_01/install.htm
    step-by-step: how to install OID
    step-by-step: how to install OID
    Also see:
    http://www.google.com.tr/#hl=tr&biw=1209&bih=761&q=Oracle+Internet+Directory+installation+guide&oq=Oracle+Internet+Directory+installation+guide&aq=f&aqi=&aql=&gs_sm=e&gs_upl=18484l25219l1l32l32l4l21l0l0l110l516l6.1&fp=b8cfe4731ae0b8bd
    PS: I suggest for your issue close thread here as answered and move it to Forum Home » Identity Management » Identity Management
    Regard
    Helios

  • OPatch installation error for OID

    Hi,
    We are trying to install OID at linux 64-bit OS and DB with Oracle 11g with Standard Edition,while installation it is giving error message as mentioned below.
    [2012-05-10T19:17:11.625+05:30] [as] [WARNING] [] [oracle.as.config] [tid: 34] [ecid: 0000JSqyWVgEcLK5QVh8id1Few7W00000P,0] Failed to start component oid1[[
    oracle.as.config.ProvisionException: HTTP status code = 400 : The request parameters did not match any components
    at oracle.as.config.impl.OracleASComponentBaseImpl.manageProcess(OracleASComponentBaseImpl.java:943)
    at oracle.as.config.impl.OracleASComponentBaseImpl.start(OracleASComponentBaseImpl.java:1062)
    at oracle.as.provisioning.fmwadmin.ASComponentProv.createComponent(ASComponentProv.java:153)
    at oracle.as.provisioning.fmwadmin.ASComponentProv.createComponent(ASComponentProv.java:73)
    at oracle.as.provisioning.fmwadmin.ASInstanceProv._createComponent(ASInstanceProv.java:401)
    at oracle.as.provisioning.fmwadmin.ASInstanceProv.createComponent(ASInstanceProv.java:358)
    at oracle.as.provisioning.fmwadmin.ASInstanceProv.createInstanceAndComponents(ASInstanceProv.java:136)
    at oracle.as.provisioning.engine.WorkFlowExecutor._createASInstancesAndComponents(WorkFlowExecutor.java:535)
    at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:439)
    at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
    at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:820)
    at oracle.as.idm.install.config.IdMDirectoryServicesManager.doExecute(IdMDirectoryServicesManager.java:945)
    at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:371)
    at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:88)
    at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:105)
    at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
    at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:64)
    at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:160)
    at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
    at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:86)
    at java.lang.Thread.run(Thread.java:662)
    [2012-05-10T19:17:11.626+05:30] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 34] [ecid: 0000JSqyWVgEcLK5QVh8id1Few7W00000P,0] Status of component false
    [2012-05-10T19:17:11.628+05:30] [as] [ERROR] [] [oracle.as.provisioning] [tid: 34] [ecid: 0000JSqyWVgEcLK5QVh8id1Few7W00000P,0] [[
    oracle.as.config.ProvisionException: Failed to start the component
    at oracle.as.provisioning.fmwadmin.ASComponentProv.createComponent(ASComponentProv.java:157)
    at oracle.as.provisioning.fmwadmin.ASComponentProv.createComponent(ASComponentProv.java:73)
    at oracle.as.provisioning.fmwadmin.ASInstanceProv._createComponent(ASInstanceProv.java:401)
    at oracle.as.provisioning.fmwadmin.ASInstanceProv.createComponent(ASInstanceProv.java:358)
    at oracle.as.provisioning.fmwadmin.ASInstanceProv.createInstanceAndComponents(ASInstanceProv.java:136)
    at oracle.as.provisioning.engine.WorkFlowExecutor._createASInstancesAndComponents(WorkFlowExecutor.java:535)
    at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:439)
    at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
    at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:820)
    at oracle.as.idm.install.config.IdMDirectoryServicesManager.doExecute(IdMDirectoryServicesManager.java:945)
    In the support site there was a bug related to above error message - and it was mentioned need to execute the Patch 9356752. When i am executing the patch it is giving error message as
    *Patch 9356752: Required component(s) missing : [ oracle.idm.oid, 11.1.1.2.0, higher version 11.1.1.6.0 found. ]*
    *[ Error during Prerequisite for apply Phase]. Detail: OPatch failed during prerequisite checks:*
    Prerequisite check "CheckApplicable" failed.
    Do you guys have any idea, if Yes how to over come....?
    Thanks,
    Ravindher

    can who solved this problem?
    my
    1.db(11.1.0.7)
    2.wls(10.3.6)
    3.sys(win7 sp1)
    4.idm(11.1.1.6)
    5.rcu(11.1.1.6)
    6.jdk(1.6u33)
    install do not configure+OID with ODSM and control in a new weblogic domain
    error:
    [2012-06-15T14:19:22.100+08:00] [as] [WARNING] [] [oracle.as.config] [tid: 12] [ecid: 0000JVikBUy6IR^LxU4EyW1Fqh3G000003,0] Failed to start component oid1[[
    oracle.as.config.ProvisionException: HTTP status code = 400 :The request parameters did not match any components
         at oracle.as.config.impl.OracleASComponentBaseImpl.manageProcess(OracleASComponentBaseImpl.java:943)
    [2012-06-15T14:19:22.100+08:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 12] [ecid: 0000JVikBUy6IR^LxU4EyW1Fqh3G000003,0] Status of component false
    [2012-06-15T14:19:22.101+08:00] [as] [ERROR] [] [oracle.as.provisioning] [tid: 12] [ecid: 0000JVikBUy6IR^LxU4EyW1Fqh3G000003,0] [[
    oracle.as.config.ProvisionException: Failed to start the component
    why?
    Edited by: 918662 on Jun 14, 2012 11:38 PM

  • Oidadmin connection

    Hello.
    I've installed oracle 8.1.7 in a linux server with Oracle Internet Directory.
    I'm trying to use oidadmin buy I can't connect with cn=orcaldmin/password.
    I've not any error message such incorrect password...
    In the console I see the next message...
    java.lang.NoClassDefFoundError: oracle/net/ldap/NNFLWrapper
    at
    at oracle.ldap.admin.Root.initClient(Root.java:896)
    at oracle.ldap.admin.Root.saveChanges(Root.java:796)
    at oracle.ldap.admin.common.AdminPropView.saveChanges(AdminPropView.java:710)
    at oracle.ldap.admin.client.propEditors.TabView.commit(TabView.java:538)
    at oracle.ldap.admin.client.AdminUtil$logonCmds.run(AdminUtil.java:727)
    at java.lang.Thread.run(Thread.java)
    I think that there is a problem with my classpath or another variable enviroment. I've no variable CLASSPATH defined.
    It's necessary?
    How must be it?
    Thank you for your answers.
    Rafa.

    Hello Rafael:
    I don't have much experience with OID running on Linux so I hope someone else is able to add their experience to this thread. I do know that there was a small patch released immediately after the Linux port was release and it had a fix for the UI. Please go to the Oracle Metalinks web site and download the patch file for OID on Linux.
    If this dosn't fix your problem let me know and Ill try to do this myself.
    Thanks,
    Jay
    null

  • Accessing OID in a Linux Environment

    Our admin username "portal" password expired, and we need to change the expiration date in our Oracle Directory Manager/Oracle Internet Directory (OID). We are familiar with accessing OID in a Windows environment, but not sure how to do so in a Linux environment.
    Is OID accessible using a IE browser (i.e., is there a special port) or is it somehow accessed in the back end?
    We are using Oracle-Application-Server-10g/10.1.2.0.2 on Linux. Let us know if you have any ideas.

    1. Make sure you have a local X-server (e.g. cygwin or reflexion-X)
    2. login to your linux server with x-forwarding
    3. export your display to your local x-server.
    4. start $ORACLE_HOME/bin/oidadmin
    oidadmin is exactly the same as on windows.
    An other option is just using your windows oidadmin tool and having it look at your linux server (in stead of you windows server)
    Last option is pointing your brower to http://linuxserver/oiddas (assuming your webserver is running on port 80 and you just have to do some small maintenaince on a user)

  • OID 10.1.4.2.0 for Linux Preview Install

    I am trying to install the preview. I am using example provided in OID-LinuxWorld-Demo-OAS_viewlet_swf.html.
    Any insight on why this fails? see below...
    [oracle@akaoradev-vm1 ~]$ su - root
    Password:
    [root@akaoradev-vm1 ~]# up2date oracle-oid
    Fetching Obsoletes list for channel: el5_i386_latest...
    Fetching rpm headers...
    Name Version Rel
    The following packages you requested were not found:
    oracle-oid
    [root@akaoradev-vm1 ~]#

    Yes, the linux is registered with Oracle ULN (Network only). This is a test VMWARE environment.
    See below...
    [root@akaoradev-vm1 ~]# date
    Thu May 29 14:16:44 AKDT 2008
    [root@akaoradev-vm1 ~]# uname -a
    Linux akaoradev-vm1 2.6.18-53.1.21.0.1.el5 #1 SMP Tue May 20 15:36:52 EDT 2008 i686 i686 i386 GNU/Linux
    [root@akaoradev-vm1 ~]# up2date --show-channels
    el5_i386_latest
    el5_i386_oracle
    [root@akaoradev-vm1 ~]# up2date oracle-oid
    Fetching Obsoletes list for channel: el5_i386_latest...
    Fetching Obsoletes list for channel: el5_i386_oracle...
    Fetching rpm headers...
    Name Version Rel
    The following packages you requested were not found:
    oracle-oid
    [root@akaoradev-vm1 ~]#

  • Installing OID, OVD on 11g Linux system

    Hi,
    I have installed OIM11g (db, rcu,wl server,oim server, soa server) on linux 5.7
    I would like to install OID and OVD ON THIS.
    Can you please provide me the some steps to install these and also the order in which I need to install these?
    I am thinking the below order.
    1) Access manager & Adaptive access manager with LDAP sync
    2) OID
    3) OVD
    4) Http server
    5) Webtier
    6) Webgates
    Is this the correct order? Please let me know.

    Hi Kevin,
    I have successfully installed OID now by following your suggesion.
    1) Installed wlserver 10.3.6 as a new middleware home
    2) Installed IDM 11.1.1.6
    3) Configured just OID.
    Now, I am trying to create a new connection in odsm to login into it using the below values but it is saying "incorrect credentials".
    Directory type - OID
    Name: OID_Instance
    Server: localhost
    Port: 7005
    SSL: unchecked
    username:cn=oracladmin
    Password: Passw0rd
    Start page: Data Browser
    Please help me.
    Here is my configuration file.
    Middleware Home Location : /u01/Oracle/Middleware_1036
    Oracle Instance Location : /u01/Oracle/Middleware_1036/Instances
    Oracle Instance : OID_Instance
    Domain Option : Create Domain
    Domain Name : odsm_domain
    Domain Home : /u01/Oracle/Middleware_1036/user_projects/domains/odsm_domain
    Domain Host Name : myserver.home.com
    Domain Port : 7002
    Weblogic Console : http://myserver.home.com:7002/console
    Weblogic User Name : weblogic
    Automatic Port Detection : true
    Enterprise Manager :
    http://myserver.home.com:7002/em
    Enterprise Manager Agent
         http://myserver.home.com:5162/emd/main
    Oracle Internet Directory
    Oracle Directory Services Manager :
              http://myserver.home.com:7005/odsm/faces/odsm.jspx

Maybe you are looking for

  • How to make a file to be opened in PL-SQL Editor of SQL Developer

    How to open a package file (.pkg) in sql Developer's PL-SQL Editor? Tried creating a new file type with Extension as .pkg and file type as PlSqlNode. Could open the file and found some of the features of plsql editor, such as find, compile... but cou

  • Jdbc Sender Adapter and Acks

    Hi, am I right in saying that the JDBC Sender Adapter can't request XI system level acknowledgements. Due to this it is necessary to establish an integrations process fed with the data from the sender adapter, sending it to the target system and rece

  • Music not playing in ios 7

    Hi - When I press "play" to start a song, the song stays at 0:00. If I try and move the slider to the middle of the song, it simply slides back down to zero. Tones and alarms play as they should and I've updated all apps. Any suggestions? Thanks, Jef

  • Date/Time Field but not a date field type..

    I am dealing with a table that was already created and filled/filling with data.. so don't have an option to have someone go back and fix. The field i am dealing with is a varchar2 not a date field. it has values like 12/31/1899 2/17/2010 10:00:00 AM

  • A Project Won't Open. Please Help.

    hi there. i started a project at 24/48,000, recorded plenty of midi, then tried to save the project at 96,000khz. the project froze, and i had to force quit the application. now that i try to open that project again, it freezes on logic's start-up. i