OID install using High availabilty option.

Hi,
I am trying to install OIM 10.1.4 on Linux. I have not been able to follow the steps as specified in metalink doc id 359715.1.
Here is what I get:
1) I cannot get a new cluster name screen as shown step 11. I only get specify existing cluster name.
2) If I select option to install metadata repository I get an error that this install is not supported after selecting Oracle AS Cluster(Identity Management).
Any ideas on how to proceed?
Thanks,

What happens if you try and spoof it and specify a new cluster name where it is asking for an existing cluster name? Are you really installing a clustered environment or would replication work better for you?

Similar Messages

How do I make Firefox ignore the "Use High Contrast" option in Windows?

I am taking care of a Windows XP machine which is running in "High Contrast Mode" for accessibility reasons. This display mode is enabled via the Control Panel of Windows (Accessibility Options, Display, Use High Contrast) and it has major impact on how Firefox display web pages. What I want to do is make Firefox ''ignore'' this operating system option, so web pages will be rendered "normally", but keep Windows in High Contrast Mode.
Is there any way I can make Firefox ignore this setting? I.e. run Windows in High Contrast Mode, but not Firefox?
A similar questions has been discussed here:
http://support.mozilla.com/en-US/kb/Website%20colors%20are%20wrong
However, I don't want to disable High Contrast for Windows and the whole machine, just for Firefox.
Thanks in advance
Bounder of Adventure

John,
thanks for your comments. The computer is mainly used by a visually impaired person. She doesn't do much web surfing though and doesn't really need a high contrast web browser. If however a colleague wants to help her maintain the machine or quickly wants to look up something on the web for her, then it would be great if it was possible to access web pages "unfiltered", in their regular look and feel, as designed by the web author. In fact, the High Contrast Mode significantly changes the way web pages look, and sometimes screen elements needed for navigation etc. are suppressed or rendered invisible. (This, of course, is often related to poor web design, like graphical buttons or links with the actual label as a background image or without an ALT attribute, but unfortunately, vast parts of the web are not really "accessible", so accessibility will remain an issue for the browser as well.)
Creating a separate user account certainly is an option, especially for shared machines, but it makes it more complicated to quickly jump in and give her a hand. That's why separate user accounts are not really popular here; instead, Opera was installed which does not adhere to the OS setting and therefore grants a neutral view to all web pages.
Actually, when I started investigating on that issue, I was quite surprised that there was no option for this in Firefox, not even in "about:config". After all, Firefox obviously queries the OS for the Contrast setting and then chooses to render the page this or that way, so I thought they certainly implemented a flag or something to change the behavior. It seems however there is no such flag, is there? This distinction seems to be entirely hard-wired.
I am not sure if this is the place for change requests, but if somebody stumbles upon this question, is there any chance to make this setting open to the public? Something like an option "accessibility.useoscontrastsetting" or so? This might also facilitate it to develop an add-on for on-demand switching between the two modes, and web designers could check more easily how their work looks for those with poor eyesight.
Greetings,
Bounder of Adventure

Install "use typical installation options for a stand-alone primary site" All SQL Prerequisites Failed. Checks SQL before SQL is even installed?

So I select the install option to "Use typical installation options for a stand-alone primary site" which says it includes installation of SQL 2012 SP1 on the local server.
But then during the prerequisite checks it fails every SQL check.
Is it just me or a giant catch 22? Am I missing something here? How is this over looked if it is what it looks like? Why even have this simple install option if it can't work?

Take a look at my R2 install guide. This is for a stand alone primary. As Torsten states you pretty much need SQL installed and configured correctly prior to running the ConfigMgr install - along with a few other pre-reqs.
https://sccmentor.wordpress.com/2014/01/08/sccm-2012-r2-step-by-step-installation-guide/
Cheers
Paul | sccmentor.wordpress.com

How to recognize if application is installed using "Install Application on Remote Desktop" option on Windows Server 2008 R2

How to recognize if application is installed using "Install application on remote desktop..." option in Control Panel in Windows Server 2008 R2?
Basically, as administrator, I can't say if the user installed application using "Install application on remote desktop..." in Control Panel or he just installed it by clicking the .msi executable. I can't find anything that makes any difference.
I could not find anything in the registry. I am quite confused.
Thanks,
Aleksandar9

Hi,
Thank you for your posting in Windows Server Forum.
Please make sure that you are using category view of control panel-programs to check the application. And in addition to “install application on Remote Desktop server” user can also use command line also.
change user /install
change user /execute
change user /query
“The first time you run the application, it searches the home directory for its .ini files. If the .ini files are not found in the home directory, but are found in the system directory, Terminal Services copies the .ini files to the home directory, ensuring
that each user has a unique copy of the application .ini files. Each user should have a unique copy of the .ini files for an application. This prevents instances where different users might have incompatible application configurations.” (Quoted formthis
article).
Hope it helps!
Thanks,
Dharmesh

How to install OID connector using OIM API in 11g?

Hi All,
We are using OID connector in OIM 11g environment. It is a simple process to install OID connector by unzipping the connector zip file to ConnectorDefaultDirectory and goto Admin console and load the connector.
However, we are looking for API methods to simulate "load the connector " step in GUI.
Please help.
Thanks
Mahendra.

Hey Mahendra,
I am not aware of this API to do the 'Deployment Manager' load task. But III try to help you using another way:
1-You can use ICF API to do this task(creating it specifically to OID). Using ICF: http://www.groenenberg.nu/Oracle_Doc/AS_11.1.1.5/doc.1111/e14309/icf.htm#BABFDJHJ
2- And following this example that my buddy did for Open DS: http://itnaf.org/2011/12/30/developing-icf-connectors/
Another helpful doc: http://docs.oracle.com/cd/E14571_01/doc.1111/e14309.pdf
I hope this helps,
Thiago Leoncio.

Is high availabilty available with B1 ?

Hi,
We've got users based around the world who connect to B1 at our UK base. I cannot provide 24 hour support in case of system downtime so I'm interested to find out what sort of options are available to provide High Availabilty/Redundancy to our SAP installation?
Thanks

Hi,
Its normal to have a system down but you can make prevent or minimize this situation.
1. In your SQL Server you could try to use the RAID.
2. Frequent backup of the database.
3. You may use SQL SERVER distributed function. This is using 2 or more SQL Server but
using 1 database.
4. Daily monitoring.
5. A spare or extra computer that have already SQL Server installed and ready to attached
or restore the recovered database.
6. Separate the APPLICATION to DATABASE Server,
Hope it will help.
THanks.
CLint

Configuring two 11g OID servers in High Availability mode.

I have OID1 server where I have installed OID11g and WLS using SSL Port 3131 and Non SSL Port 3060. The ldap set up is working as the sqlnet connections are using ldap adapter to resolve the request.
I have OID2 server where I have installed OID11g using the same port.
Now, I want to setup a cluster for these two so that the the load balancer will automatically route the requests to either of the two servers so that if one is unavailable, the other will fill the request. I am following "Configuring High Availability for Identity Management Components" document, but it is not very what steps needs to be followed.
Any suggestion will be appreciated;
I am also having problem using ldapbind or any of the oid commands as it gives "unable to locate message file: ldap<language>.msb" despite the fact that I am seting all the env vars such as ORACLE_HOME, ORACLE_INTANCE, ORA_NLS33 and so on.

You don't need to setup a cluster for Load balancer. The Load balancer configuration can point to both the server and depending on the configuration in LBR act in failover and load balanced mode. All you need to take care of is that the two OID servers are using the same schema.
When installing first OID server it gives a option to install in cluster mode and when installing the second server you can use the option to expand the cluster created in first installation. But that should not stop you from configuring OID in highly available mode using Load balancer as explained above.
"unable to locate message file: ldap<language>.msb" occurs if you have not set the ORACLE_HOME variable. See that it is set to <MiddlewareHome>/Oracle_IDM1 if you have used the defaults.
Hope this helps,
Sagar

I'm a beginner and would like to know which Photoshop to use (so many options). The only edits I care about being able to do are: whitening teeth, smoothing complexions/taking away blemishes. Does any photoshop have these options? I haven't been able to

I'm a beginner and would like to know which Photoshop to use (so many options). The only edits I care about being able to do are: whitening teeth, smoothing complexions/taking away blemishes. Does any photoshop have these options? I haven't been able to find the teeth whitening one anywhere. Also, I don't want it to lessen the high quality if my photos. Thank you so much!!

Hi Erika,
I came to Lightroom quite recently (in the last month!) from Photoshop Elements 11. I like the organization features in LR better, but for adjustments such as the ones that you mentioned I would leave LR and go back to Photoshop Elements 11, primarily because that is what I know. I don't use the subscription service, mainly because I already owned and installed the boxed version of Photoshop Elements 11 and adding it to a subscription service with Lightroom seemed redundant. I am sure someone in the community will (or has) comment(ed) that it is possible to whiten teeth and cure blemishes within LR, but I haven't figured out how to do that yet. Check out the TV Adobe free tutorials, particularly Julianne Kost's tutorials. She has a good presentation style and you might find the LR answer that you need with detailed instructions.

QT PRO high quality option, why not default after UPDATE?

I just installed the new QT Security Update, and now my QT quality for my videos is quite sub-standard across the board. I first noticed it using iTunes watching some videos. I then opened a movie with QTPro full screen, and the screen was pixillated and grainy compared to before the update. I went to movie properties info pane, and noticed that the "use high quality when avail." option was NOT selected (under movie properties). I clicked this, and the quality improved. I then had to SAVE the movie (with dual extention including .mov).
QT used to have this selected as default and I never had to re-save the video. I went under QT preferences (not under movie properties), and made sure "use HQ video setting when avail" was checked--it was.
So, I have about 100 movies that I now have to RE-SAVE after checking the properties HQ box? This is quite tedious and cumbersome. Is there a way to go back to OLD settings? Should I uninstall QT Update and reinstall? Or is this the method mac is now advocating as standard protocol?
I love my "easy" to use mac and QT. But this seems out of norm for QT software. HELP?!
iMac 17inch flat-panel PPC Mac OS X (10.4.9) QT pro, latest software updates

I've noticed that the mpg-4 videos are most dramatically effected. My iTunes downloaded TV/movie/videos are all fine. I do not notice a change in quality checked or unchecked with those specific formats.
Yah, I know it shouldn't have caused an issue, but quite coincidental as I've been using QT for over 2 years now and through all the updates and improved versioins never had a problem.
I guess stranger things have happened and it could be circumstance! LOL!

OBIEE 11g and high availabilty with weblogic

Hello all,
Have anyone already tried to configure an high availabilty environment with more weblogic server and more business intelligence environemnt?
I want to say for example weblogic installed as cluster using 3 nodes and then 2 environet (TEST/PRODUCTION) over this 3-nodes cluster?
Thanks
Stefano

Prabal,
Did you get an answer or we have to wait for the official release till July-1-2009.
Thanks,
Rahul

Unable to Launch Adobe Premiere Pro CS6 using High-Performance on AMD Radeon Graphic Card

I have been unable to launch Adobe Premiere Pro since installing it with the error message "Adobe Premiere Pro could not find any capable video play modules. Please update your video display drivers and start again"
Here are my specs:
Lenovo Ideapad U400
Windows 7 (64bit)
Intel i5 2.5 ghz processor
AMD Radeon 6470M graphics card
The only occasion during which I have successfully launched Premiere Pro was after reverting to the default graphics card on my computer and uninstalling AMD Radeon, otherwise, I have tried to change Premiere Pro to run on High-Performance on Catalyst Control Center to no avail, I do not wish to revert to the Standard Graphics Card as it slows down my computers performance one hell of a lot, neither do I wish to have to constantly uninstall and reinstall my AMD Radeon Graphics Card when I use Premiere Pro. Thank you for your time.

Update:
- with Intel (R) HD Graphics Card disabled, Catalyst Control Center reports that no AMD Graphic card is installed
- using Device Manager under Control Panel, AMD Radeon 6470M was verified to be up-to-date
- Premiere Pro works so long as I disable the Intel card before launch, however, I re-enable it upon startup to get rid of the 800x600 resolution
- AMD Mobility Radeon Driver Verification Tool is unable to verify and update my driver, refers me to lenovo to update it.
- My graphics card is up-to-date as verified by lenovo
- Intel (R) HD Graphics Card now up-to-date
- Display currently mainly using Intel (R) HD Graphics Card (Possibly why it caps resolution at 1024x768 when disabled) I'm not sure how to switch the main Graphics Card used, Catalyst Control Center doesn't seem to have the option.
- when disabled, computer reverts to vgasave instead of Radeon
- Disabling Radeon does nothing to existing display
- After updating my Intel card, Catalyst Control Center reported CCC was not supported by the current display adapter
- CCC worked after rolling back Intel card
From what I infer, I believe the problem to root from my intel card being the main card used, if there is anyway to switch my radeon card to the default instead of the Intel card, do tell me, I believe this may solve the problem, I apologise for troubling you guys, and I'm starting to feel that I shouldn't be troubling Adobe with my problem with AMD, this discussion is probably really out of place but I hope it will help out others with a similar problem.

Wily Introscope on high availabilty

Hi All,
Our solution Manger is on high availabilty. We want to install Wily Introscope manager on our Solution Manager. How can we install it on high availabilty. Please help.
Also Wily Agents(on managed systems) need to be installed on only Stand Alone Java Systems or on ABAP+JAVA systems also.
Appreciate your help.
Thanks and Regards,
Subashree

Hello Subashreekannan ,
To setup the EM in a cluster scenario you may refer to the [Wily Introscope Setup Guide 8.0 |https://websmp204.sap-ag.de/~sapdownload/011000358700001995842008E/SAPISDOC02_0.pdf] in section "Enterprise Manager Cluster Setup".
To setup the EM in a Failover scenario, you may refer to the [Wily Adminsitration and configuration guide|http://www.scribd.com/doc/44471028/Introscope8-0-2-0ConfigAdminGuide] in section "Using MOM Hot Failover".
Regarding the ISAgent, the Introscope Agent setup should be performed for JAVA and dual stack systems. It is not neessary to perform the ISAgent setup only for pure ABAP systems.
Regards,
Allam

Exchange 2010 High availabilty

hello ,
i have exchange 2010 installed on my head office
sevrer 1 : mailbox server
server2 : hub+cas
i want to install high availabilty solution in DR without buying hardware loadbalancer .
incase of our head office disaster should i able sending and receving from DR
regards
MCP MCSA MCSE MCT MCTS CCNA

Hi,
For CAS/HUB servers, you can still use Windows NLB to load balance traffic. It is supported but the recommendation is to user HLB. Besides, it is recommended to create a Client Access server array even if you only have a single Client Access server within
your organization.
For DAG, we shoule note that each member of the DAG must also be running the same operating system.
More information about datacenter switchover, please refer to
Datacenter Switchovers.
Hope this helps.
Best regards,
Belinda
Belinda Ma
TechNet Community Support

Silent Install using ResponseFile for Windows XP

Hi,
Does anyone know or have any custom responseFile that works? I have tried many times to do a custom install using the clientcustom.rsp from the CD and also from record mode but not all components seems to install correctly eventhough the log said it installed successfully. Especially the Oracle Universal Installer component.
please help
thanks

Here is a copy of a customclient.rsp file that I used to successfully install/uninstall Oracle 9i Client. Please note that the problem I have is determining when the silent install finishes. The install gets launched as a background task.
## Oracle9i Client Custom Install Response File Template ##
## Copyright(c) Oracle Corporation 1998,2000. All rights reserved.##
## Specify values for the variables listed below to customize ##
## your installation. ##
## Each variable is associated with a comment. The comment ##
## identifies the variable type. ##
## Please specify the values in the following format: ##
## Type Example ##
## String "Sample Value" ##
## Boolean True or False ##
## Number 1000 ##
## StringList {"String value 1","String Value 2"} ##
## The values that are given as <Value Required> need to be ##
## specified for a silent installation to be successful. ##
## This response file is generated by Oracle Software ##
## Packager. ##
[General]
RESPONSEFILE_VERSION=1.7.0
[SESSION]
# Name : ORACLE_HOME
# Datatype : String
# Description : Full path of directory to use for installing Oracle
# products - the "Oracle Home"
# Valid values : Directory path (existent or non-existent)
# Example value : "d:\oracle\products\9.0.1"
# Default value : none
# Mandatory : Yes
ORACLE_HOME="C:\oracle\ora92"
# Name : ORACLE_HOME_NAME
# Datatype : String
# Description : Name used to uniquely identify the Oracle Home on this
# system.
# Valid values : String that is unique on this system
# Example value : "OHOME1"
# Default value : none
# Mandatory : Yes
ORACLE_HOME_NAME="OraHome92"
# Name : TOPLEVEL_COMPONENT
# Datatype : StringList
# Description : Top-level product and version to install
# The format is of the form {"<Internal name>", "<version>"}
# Note : DO NOT CHANGE THE DEFAULT VALUE.
# To install different top-level products, use one of the
# other response file templates
# Mandatory : Yes
TOPLEVEL_COMPONENT={"oracle.client","9.2.0.1.0"}
# Name : DEINSTALL_LIST
# Datatype : StringList
# Description : List of components to be deinstalled during a
# : deinstall session
# Valid values : <"oracle.server","9.2.0.1.0">
# Default value : none
# Mandatory : No
DEINSTALL_LIST={"oracle.client","9.2.0.1.0"}
# Name : SHOW_SPLASH_SCREEN
# Datatype : Boolean
# Description : Set to true to show the initial splash screen of the
# installer
# Valid values : true, false
# Default value : false
# Mandatory : No
SHOW_SPLASH_SCREEN=true
# Name : SHOW_WELCOME_PAGE
# Datatype : Boolean
# Description : Set to true to show the Welcome page of the installer
# Valid values : true, false
# Default value : false
# Mandatory : No
SHOW_WELCOME_PAGE=false
# Name : SHOW_COMPONENT_LOCATIONS_PAGE
# Datatype : Boolean
# Description : Set to true to show the component locations page in
# the installer. This page only appears if there are
# products whose install directories can be changed.
# If you set this to false you will prevent the user
# from specifying alternate install directories.
# Valid values : true, false
# Default value : false
# Mandatory : No
SHOW_COMPONENT_LOCATIONS_PAGE=false
# Name : SHOW_CUSTOM_TREE_PAGE
# Datatype : Boolean
# Description : Set to true to display the available products
# selection tree during a Custom install
# Valid values : true, false
# Default value : false
# Mandatory : No
SHOW_CUSTOM_TREE_PAGE=false
# Name : SHOW_SUMMARY_PAGE
# Datatype : Boolean
# Description : Set to true to display the Summary page in the
# installer
# Valid values : true, false
# Default value : false
# Mandatory : No
SHOW_SUMMARY_PAGE=false
# Name : SHOW_INSTALL_PROGRESS_PAGE
# Datatype : Boolean
# Description : Set to true to show the install progress screen.
# This screen shows detailed status of the
# installation, which file is being copied, which link
# action is being performed, etc. It also shows
# percentage complete.
# Valid values : true, false
# Default value : true
# Mandatory : Yes
SHOW_INSTALL_PROGRESS_PAGE=true
# Name : SHOW_REQUIRED_CONFIG_TOOL_PAGE
# Datatype : Boolean
# Description : Set to true to display the status screen for
# required configuration tools. This screen shows the
# status of each tool along with detailed information
# in the event of tool failure.
# Valid values : true, false
# Default value : true
# Mandatory : Yes
SHOW_REQUIRED_CONFIG_TOOL_PAGE=true
# Name : SHOW_OPTIONAL_CONFIG_TOOL_PAGE
# Datatype : Boolean
# Description : Set to true to display the optional configuration
# tool page which allows you to launch optional
# configuration tools and view details status,
# including details on any failures.
# Valid values : true, false
# Default value : false
# Mandatory : No
SHOW_OPTIONAL_CONFIG_TOOL_PAGE=false
# Name : SHOW_RELEASE_NOTES
# Datatype : Boolean
# Description : Set to true to show the release notes screen from
# which Release Notes can be viewed. NOTE, 9.0.1 does
# not use any release notes so this will not be
# relevant for an 9.0.1 install.
# Valid values : true, false
# Default value : false
# Mandatory : No
SHOW_RELEASE_NOTES=false
# Name : SHOW_END_SESSION_PAGE
# Datatype : Boolean
# Description : Set to true to display end session dialog. This
# page shows whether the installation is successful.
# Valid values : true, false
# Default value : false
# Mandatory : No
SHOW_END_SESSION_PAGE=true
# Name : SHOW_EXIT_CONFIRMATION
# Datatype : Boolean
# Description : Set to true to display dialog for confirming exit.
# If set to false, installer will exit without
# prompting.
# Valid values : true, false
# Default value : false
# Mandatory : No
SHOW_EXIT_CONFIRMATION=true
# Name : NEXT_SESSION
# Datatype : Boolean
# Description : Set to true to allow users to go back to the File
# Locations page for another installation. If this is
# set to true, NEXT_SESSION_RESPONSE should be used to
# indicate location of the second reponse file.
# Valid values : true, false
# Default value : false
# Mandatory : No
NEXT_SESSION=false
# Name : NEXT_SESSION_ON_FAIL
# Datatype : Boolean
# Description : Set to true to allow users to go back to the File
# Locations page for another installation even if the
# first installation failed. This flag is only
# relevant if NEXT_SESSION is set to true.
# Valid values : true, false
# Default value : false
# Mandatory : No
NEXT_SESSION_ON_FAIL=false
# Name : SHOW_DEINSTALL_CONFIRMATION
# Datatype : Boolean
# Description : Set to true if deinstall confirmation is needed
# : during a deinstall session.
# Valid values : true, false
# Default value : true
# Mandatory : No
SHOW_DEINSTALL_CONFIRMATION=true
# Name : SHOW_DEINSTALL_PROGRESS
# Datatype : Boolean
# Description : Set to true if deinstall progress is needed during
# : a deinstall session.
# Valid values : true, false
# Default value : true
# Mandatory : No
SHOW_DEINSTALL_PROGRESS=true
# Name : LOCATION_FOR_DISK<disk number>
# Datatype : String
# Description : Set to the full path of the root of the subsequent CDs in
# the Oracle9i set. This may be a mounted CD-ROM location or
# a location on the hard drive if you have copied the
# CD images to the hard disk.
# Valid values : full path to the root of the CD corresponding to the disk
# number indicated.
# Default value : None
# Mandatory : Yes
LOCATION_FOR_DISK2="P:\Imaging\Oracl9i Client"
LOCATION_FOR_DISK3="P:\Imaging\Oracl9i Client"
# End of GENERAL SESSION section
# Oracle9i Client
[oracle.client_9.2.0.1.0]
# Name : COMPONENT_LANGUAGES
# Datatype : StringList
COMPONENT_LANGUAGES={"en"}
# Name : INSTALL_TYPE
# Datatype : String
# Description : Type of installation for the Oracle9i Client
# Note : DO NOT CHANGE THE DEFAULT VALUE.
# To install using a different install type, use one of the
# other response file templates
# Mandatory : Yes
# Example : INSTALL_TYPE = "Custom"
INSTALL_TYPE="Custom"
# Name : DEPENDENCY_LIST (oracle.client)
# Datatype : StringList
# Description : List of optional products to be installed along with
# this one. The following choices are available. The
# value can contain any combination of these choices.
# Note : The products listed are optional dependencies. Any
# required dependencies will automatically be installed.
# Valid values :
# oracle.emcltprod, 9.2.0.1.0 : Oracle Enterprise Manager Products 9.2.0.1.0
# oracle.networking.netcltprod, 9.2.0.1.0 : Oracle Network Utilities 9.2.0.1.0
# oracle.utilities.util, 9.2.0.1.0 : Oracle Database Utilities 9.2.0.1.0
# oracle.java, 9.2.0.1.0 : Oracle Java Utilities 9.2.0.1.0
# oracle.rdbms.sqlplus, 9.2.0.1.0 : SQL*Plus 9.2.0.1.0
# oracle.apache.isqlplus.ise, 9.2.0.1.0 : iSQL*Plus Extension for Windows 9.2.0.1.0
# oracle.java.jdbc, 9.2.0.1.0 : Oracle JDBC/OCI Interfaces 9.2.0.1.0
# oracle.java.jdbc.thin, 9.2.0.1.0 : Oracle JDBC/THIN Interfaces 9.2.0.1.0
# oracle.oid.client, 9.2.0.1.0 : Oracle Internet Directory Client 9.2.0.1.0
# oracle.winprod, 9.2.0.1.0 : Oracle Windows Interfaces 9.2.0.1.0
# oracle.rdbms.ocitop, 9.2.0.1.0 : Oracle Call Interfaces 9.2.0.1.0
# oracle.p2k, 9.2.0.1.0 : Oracle Programmer 9.2.0.1.0
# oracle.p2k.xmldevkit, 9.2.0.1.0 : Oracle XML Developer's Kit 9.2.0.1.0
# oracle.doc.windoc, 9.2.0.1.0 : Oracle9i Windows Documentation 9.2.0.1.0
# oracle.swd.oui, 2.0.0.8.0 : Oracle Universal Installer 2.2.0.8.0
# oracle.options.ano, 9.2.0.1.0 : Oracle Advanced Security 9.2.0.1.0
# oracle.java.sqlj.sqljruntime, 9.2.0.1.0 : SQLJ Runtime 9.2.0.1.0
# oracle.options.intermedia.imclient, 9.2.0.1.0 : Oracle interMedia Client Option 9.2.0.1.0
# oracle.options.olap.api, 9.2.0.1.0 : Oracle OLAP API 9.2.0.1.0
#Example : DEPENDENCY_LIST = {"oracle.emcltprod","9.2.0.1.0"}
DEPENDENCY_LIST={"oracle.networking.netcltprod","9.2.0.1.0","oracle.winprod","9.2.0.1.0","oracle.rdbms.ocitop","9.2.0.1.0","oracle.options.olap.api","9.2.0.1.0"}
# Oracle Enterprise Manager Products
[oracle.emcltprod_9.2.0.1.0]
# Name : DEPENDENCY_LIST (oracle.emcltprod)
# Datatype : StringList
# Description : List of optional products to be installed along with
# this one. The following choices are available. The
# value can contain any combination of these choices.
# Note : The products listed are optional dependencies. Any
# required dependencies will automatically be installed.
# Valid values :
# oracle.sysman.client, 9.2.0.1.0 : Oracle Enterprise Manager Client 9.2.0.1.0
# oracle.sysman.pack.change, 9.2.0.1.0 : Oracle Change Management Pack 9.2.0.1.0
# oracle.sysman.pack.diag, 9.2.0.1.0 : Oracle Diagnostics Pack 9.2.0.1.0
# oracle.sysman.pack.tuning, 9.2.0.1.0 : Oracle Tuning Pack 9.2.0.1.0
# oracle.sysman.pack.apps, 9.2.0.1.0 : Oracle Management Pack for Oracle Applications 9.2.0.1.0
# oracle.sysman.pack.std, 9.2.0.1.0 : Management Pack for Oracle Standard Edition 9.2.0.1.0
DEPENDENCY_LIST={ "oracle.sysman.client","9.2.0.1.0","oracle.sysman.pack.change","9.2.0.1.0","oracle.sysman.pack.diag","9.2.0.1.0","oracle.sysman.pack.tuning","9.2.0.1.0","oracle.sysman.pack.apps","9.2.0.1.0"}

Seriously missing WL install using console mode ...

Greetings --
I've been working with the WebLogic product since the BEA days of v6.0 and have just started working with 12c - specifically 12.1.3.0.0. I have always used the console-mode when installing my WL products and just experienced something that almost made me shed a tear.... the "-mode=console" method is no longer available.
I remotely manage 75+ WebLogic domains all in a LINUX environment and have the need to create/delete WL domains on a daily basis and the the ability to do a quick install is highly important. Console mode was vary fast, easy and saved me a lot of time since I was able to create/extend my WL domains locally on the server. Now I have to use the graphical option via X11 and the time it took me to create just 1 WL domain, I could have created 10-15 domains using the console mode.
What was the thinking behind the removal/disabling of this option - and why in the middle of a major version?? (According to DOC ID 1577869.1 console mode is unavailable in v12.1.2 & higher)
Thanks!!
Ed Langlais --

Hi,
this is very strange. I installed WebLogic on the server without X11 support. You have now to options:
1. Create the Domain via wlst (my Solution)
2. Start on the Server the vncserver and install via GUI.
I miss the Console mode also.
Regards
Borys

OID install using High availabilty option.

Similar Messages

Maybe you are looking for