OJ 8000 prints alignment page with every job

WinXP, New install. OJ is printing this page every time, and driving me nuts! Is there a key sequence on the panel or something to turn it off?

Hi Everyone,
This tends to happen because the alignment that was done the previous round is cancelled or failed. In the event that it is cancelled, please kindly let it run once properly, that should solve the issue. In the event that the alignment failed, please try to run the printhead cleaning via the software and let it run the alignment once more at the end of it.
Hope this helps.
Although I am an HP employee, I am speaking for myself and not for HP.
***Say thanks by clicking the "Kudos! Star" which is on the left***
**Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue.**

Similar Messages

Printing blank page with every printed page

I have a C7280 printer, and it has been working fine. However, it now sends out one blank page for every printed page. any ideas on why this is happening and how to fix it?
thanks.

HI,
You might try using this print diagnostic utility to see if it helps solve your problem.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-82717-1&lc=en&dlc=en&cc=us&...=
There are several solutions within the utility that fixes several printer issues.
Say Thanks by clicking the Kudos Star in the post that helped you. Please mark the post that solves your problem as Accepted Solution.
I am employed by HP

HP Officejet Pro 8000 -- keeps printing alignment page

I was having troubles with the black ink not printing correctly so after doing many cleanings I decieded to manually clean the print head. I took the printhead out of the printer then wipped the part where the ink comes out with a most paper towle. After I put the printhead back in the printer printed a print alignment page. OK. Now when ever I print anything the printer will after the print job is done print another alignment page. Is there a way to make it stop? Thanks for you help.
This question was solved.
View Solution.

@MacNeilBlue- I am sorry that you are having an issue with the alignment page printing repeatedly. I would remove, and reseat the cartridges. Then I would repeat the alignment process as shown below.
Open the HP product software:
Windows XP: Click Start ( ), click All Programs , click HP , click the folder for your HP product, and then click the icon for your HP product ( ).
Windows Vista or Windows 7: Click the Windows icon ( ), click All Programs , click HP , click the folder for your HP product, and then click the icon for your HP product ( ).
Windows 8:
Right-click or tap and hold the lower left corner of the screen, and then click or tap Search from the menu.
Click or tap Apps ( ) if it is not already selected.
Type HP in the search box.
Click or tap your printer ( ).
NOTE:You can also open the HP product software from your computer desktop: double-click the icon for your HP product ( ).
The product software opens in a new window.
In the product software, double-click Printer Actions ( ).
Double-click Maintenance Tasks ( ). The HP Toolbox opens.
Click the Device Services tab.
Click Align Ink Cartridges , and then follow the on-screen instructions to print the alignment page.
Lift the scanner lid.
Place the alignment page with the printed-side down on the right front corner of the scanner glass. See the engraved guide next to the scanner glass for help loading the alignment page.
Figure 6: Place the alignment page on the scanner glass
Close the scanner lid.
Press the button next to OK on the control panel display ( ) The product scans the alignment page.
When the Alignment successful message displays on the control panel screen, press the button next to OK on the control panel display ( ) to complete the alignment.
I am a former employee of HP...
How do I give Kudos?| How do I mark a post as Solved?

Must I print out a new Alignment Page with each new cartridge?

Do I need to print out a new Alignment Page with each new cartridge I install on my HP Photosmart C4480? Or can I save and reuse the initial one I got when first installing my printer cartridges? The Alignment pages all seem to be identical when I print them out with each new cartridge I install, but I'm not examining them with a microscope.
If I can save and reuse the Alignment page with sucessive cartridge replacements, when I am following the procedure for installing a new cartridge and the printer prompts me to print out a new Alignment page, is there an option to skip that step? I don't recall seeing that option on the control panel window on the printer.
Thank you!
This question was solved.
View Solution.

themadtoker wrote:
do NOT listen to this expert.
YOU DO NOT NEED A NEW ALIGNMENT PAGE EVERY TIME YOU INSTALL A NEW CARTRIDGE
I registered just to respond to this
The alignment pages all look the same because they are all the same, pretty sure its a scam to let you use ink. [snip]
I am pretty sure you do not understand what the alignment page is for - it provides information for alignment of black vs. color and also is used to calibrate the operating energy for the color cartridge.
You may be able to "fool" the printer by reusing an old alignment page, but the quality will suffer as you will not be running at the optimum energy.
You are certainly free to do what you want with your printer but please do not mislead others with misinformation.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Photosmart - Printing alignment page problem

Setting up my printer and it is trying to print the alignment page but every time it prints a blank page. I am pretty sure it's a hardware problem (cartridges are brand new) but cannot nail down the exact reason why.
Thanks in advance.

What printer model? What operating system? Make sure the clear protective tape has been removed from the cartridges.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Failure to print alignment page after changing ink cartridge

I just replaced the tricolor ink cartridge in my ENVY 5530 printer and after installing the new cartridge the unit is stuck in a loop of "Now printing alignment page..." however there is no noise indicating that the page is being fed. Attempts to cancel the action also result in a prolonged "Cancelling ..." but with no action. Based on other comments in this forum I have:unplugged the unit.removed all ink cartridgesRestarted the unit - where in I receive a message that I should use the power off button to prevent damage to the unit.reinstalled the cartridgesAttempted to print the alignment pageHowever the cycle simply repeats itself.Any assistance would be appreciated - the unit was functioning perfectly fine before it simply ran low on ink and used the ink cartridge sent by HP Ink service as the replacement unit. Many thanks in advance.

Hi SolomonI, Welcome to the HP Forums. I see that you are having an issue after you have installed new ink. I see that you have done numerous steps in the attempt to resolve this issue. You stated that you unplugged the unit from the power source. Please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector. One thing to try is to by pass the alignment page and see if the unit will print from a copy or print from the computer. Let me know how you make out. I will be happy to research other options if needed. Cheers,

How can I print web pages with HP psc 2175 printer?

Hi,
I'm having difficulty printing web pages with my HP psc 2175 printer. The printer spits out many pages before the actual page I want printed and then at times it doesn't print all of the section desired.
In fact, when I copied one page the other day, saved it as a pdf file to my computer, opened the file and the document still would not print.
Anyone have any idea what could be happening?
Lee

I have a strange issue - I am also using HP Envy 100 410A and its prints fine from iPad2. But when I try to print from my Gen 1 iPad, it goes thru the motions (shows the printer, allows to select which pages to print, double sided print etc.) but the printing actually doesn't hapen.
Any suggestions?
Thanks

Printing web page with select tags in IE9 and a .cfm file-only the original selected option prints

My web page has a select tag and cfselect tags and when I print the page with a different option other than the originally selected option the print for both types of select tags reverts back to the original selection and ignores the new selection. This happens in IE9 and .cfm files but not when the page is printed in IE8 or IE7 modes (tried in the F12 Developer Tools.) It also needs to be a .cfm file. FireFox printed the pages correctly for any combination.
This was done on a Dell and ThinkCentre computers under Windows 7. Also, I was able to reproduce the same problem on an different university web site where a selection box would revert back to the original selection for printing on a .cfm page and would print properly on a .PHP page at the same site.
For my site, I used a print button which calls print() and right clicked and chose print and got the same results no matter which method was used. I only had the right click method on the third party web site.
I know this is probably a bit narrow an issue but, any help would be appreciated.

It appears that it is probably an IE9 bug.
I simplified the problem by turning the page source taken from the brouser of the original .cfm into an html file and found that it would still print improperly.
When I eliminated the various parts of the file I found that it would print correctly only when I removed the first line, the "DOC type" line.
The page will print the newly selected option but then I lose the style sheet.
If it does not work in an HTML file it must be IE. It is not the .cfm. The reason that it did not work for .cfm files, is that they always have a "DOC type" statement.
I have put the issue into an MSDN forum in addition to the one mentioned previously.

Hp deskjet keeps printing alignment page

Hi:
Since i changed operating systems from WindowsXP32bit to Windows7 64bit, my printer keeps printing alignment pages. It will do it when i power on the printer, and it will do it after each printout. So far ive looked at HP's deskjet page. The HP Toolbox software isnt supported by Windows7, meaning that the handy print alignment and cartridge ink level software cant be used. I went to Hp's print alignment page ,they give you steps on what buttons to press on the printer to print an alignment page, to clean the printheads,print a print quality diagnostic page [which didnt work] ,and also to calibrate linefeed. I also cleaned the ink cartridges and removed any dry ink on them.
None of that seemed to help. Does anyone know a solution to this? [this printer does not have a scanner by the way].
I like this printer, and since theres no "windows7 compatible" HP inkjet printers available at this time, id like to keep this one.
Thanking you

The driver for the Deskjet 5150 is delivered though Windows Update as described here. The Deskjet 5550 driver would also be compatible, I would recommend the HP version rather than the earlier Microsoft version.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

I can not print web pages with my HP Deskjet 5440

I can not print web pages with my HP Deskjet 5440. I use Vista, no error page, just prints a blank page with headers and footers. Recently reinstalled printer driver from HP.

Hello , Welcome to the HP Support Forums!
I understand that since upgrading your Mac OS X 10.10 computer to Mac OS X 10.10.4 you have been unable to print colour photos wirelessly from your HP Officejet 5740 e-All-in-One Printer. I would like to assist you today with resolving this colour printing issue. To be honest, it does sound like Mac may have loaded the generic Apple Airprint driver on your printer rather then the HP Full Feature Software and Driver package. Should this be the case then you will only have basic print capabilities. Please follow the steps below to confirm that your HP Officejet is utilising the correct driver on your Mac.
1. Click the Apple menu, and then click System Preferences. 2. Click Print & Scan, and then check if the name of your printer displays in the Printers list. 3. Click the name of your printer, click the minus sign (), and then delete the printer.  4. Click the plus sign (), click Add Printer or Scanner, click the name of your printer, 5. Click the Use or Print Using box, and then select the name of your printer in the pop-up menu. Ensure that the Officejet driver is selected and not the Airprint driver.
  6. Click Add to add the printer to the list.  Once your printer has been installed with the correct HP driver, please test printing a colour photo to confirm that the issue has been resolved. Please respond to this post with the result of your troubleshooting. Should the issue persist there are additional software and driver troubleshooting steps I will have you perform. I look forward to hearing from you!

Print the order with Background Job

Hi Gurus,
I have to print the order on button click in a report.
i have done the coding and passing the parameters to a stahndard program on submit.
but problem is that order is going to spool but not printing the order.
As batch job not supporting the LOCL,please suggect the alternative to achieve the print.
Br,
Surya

Hi Lokesh,
Thanks for your quick reply.
i am using the below code for printing the order with batch job on clicking the button in my report.
     DATA: NAME TYPE TBTCJOB-JOBNAME.
DATA: NUMBER TYPE TBTCJOB-JOBCOUNT.
DATA: PRINT_PARAMETERS TYPE PRI_PARAMS.
NAME = 'ORDER_PRINTING'.
CLEAR: RANGE1.
*REFRESH: range.
RANGE1-SIGN = 'I'.
RANGE1-OPTION = 'EQ'.
RANGE1-LOW = 'BA00'.
RANGE1-HIGH = 'ZBA1'.
APPEND RANGE1 TO RANGE.             .
CALL FUNCTION 'JOB_OPEN'
EXPORTING
JOBNAME = NAME
IMPORTING
JOBCOUNT         = NUMBER
EXCEPTIONS
CANT_CREATE_JOB = 1
INVALID_JOB_DATA = 2
JOBNAME_MISSING = 3
OTHERS = 4.
IF SY-SUBRC = 0.
SUBMIT SD70AV1A WITH RG_KSCHL IN RANGE
WITH RG_VBELN IN ORDER_TAB
TO SAP-SPOOL
SPOOL PARAMETERS PRINT_PARAMETERS
WITHOUT SPOOL DYNPRO
VIA JOB NAME NUMBER NUMBER
AND RETURN.
IF SY-SUBRC = 0.
CALL FUNCTION 'JOB_CLOSE'
EXPORTING
JOBCOUNT = NUMBER
JOBNAME = NAME
STRTIMMED = 'X'
EXCEPTIONS
CANT_START_IMMEDIATE = 1
INVALID_STARTDATE = 2
JOBNAME_MISSING = 3
JOB_CLOSE_FAILED = 4
JOB_NOSTEPS = 5
JOB_NOTEX = 6
LOCK_FAILED = 7
OTHERS = 8.
IF SY-SUBRC <> 0.
ENDIF.
ENDIF.
Please suggest where should i give the printer name.
fyi.. i am trying to pass the same LOCL name to the job with the FM- GET_PRINT_PARAMETERS with destinamtion 'LOCL'
Br,
Surya

I have a printer xerox 3220 on networking ,have pc´s and a mac ,problem:it´s already install but does not work ,only print many page with code program,i will appreciate the solution

i have a printer xerox 3220 on networking ,have pc´s and a mac ,problem:it´s already install but does not work ,only print many page with code program,i will appreciate the solution

Hi guillermospain,
Welcome to the Support Communities!
The article below may be able to help you with this.
Click on the link to see more details and screenshots.
OS X: Connecting a Wi-Fi printer to your Wi-Fi network
http://support.apple.com/kb/ht3500
OS X Mountain Lion: Set up a printer
http://support.apple.com/kb/PH11145
OS X Mountain Lion: Reset the printing system
http://support.apple.com/kb/PH11143
Cheers,
- Judy

Officejet 4615 stuck on 'Printing Alignment Page' during initial setup

whet the printer start she want to print alagin page and stuck
the printer print from the computer
i update firmware and i do hardreset
This question was solved.
View Solution.

Hello @menybiton ,
Welcome to the HP forums.
I understand your printer is stuck on printing alignment page.
I would like to help you.
I would remove the ink cartridges.
Then preform another hard reset.
When the printer asks for the missing ink cartridges, reinstall them.
Aardvark1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

HP OfficeJet Pro 8000 A809 printing line feed page after every job

I've searched and I have found this is a known issue - that there is supposed to be an update to fix this. I can't find this update anywhere for the HP Officejet Pro 8000 A809. It is connected to the computer via a USB cable. I have tried uninstalling and reinstalling the driver, changing the print heads, doing diagnostics on it, ..., and I still get the line feed page printing after every print job. Help!

Hey there @tjkalb, I hope you are doing well
I read your post about how a "line feed" page prints after each print job from your Officejet 8000, running Windows 7. I have some steps and questions for you to try to get started. Afterwards please get back to me with the results and we will go from there if needed.
1. Does the "line feed" page print after print jobs from all programs, or are you finding it prints when you print from somewhere specifically?
2. Try a Clean Boot on your PC, restart the PC, and try printing from Notepad to see if the line feed prints.
3. Print a Print Quality Page from the printer and examine it for any defects and to see if the line feed page still prints afterwards:
source
4. Click here and try download the "Updates" for this printer: HP Officejet Pro 8000 Printer - A809a
5. Create another User Account profile on your computer and try printing from there to see if the line feed page prints from another profile.
I look forward to hearing from you! If you wish to thank me for my assistance, click the thumbs up icon below
Happy Friday!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

HP Officejet Pro 8000 Printing Blank Pages Instead Of Data And Also Reorienting Itself

Hi all
We have a wireless HP Officejet Pro 8000 in our office (but via cable, not wireless) to a network. The printer is occasionally printing blank pages instead of say a spreadsheet selected to print.
The other issue is that if you say are printing two copies of the same spreadsheet, one prints okay (say landscape) and the second copy, selected at the time of printing, prints it portrait but only part of the left hand side of it and the rest is blank. Coming out of and going back inthe file usually recitifes this. But it does it again any time it feels like it.
We did have an upgrade, where our IT guy took away our desktop boxes and replaced with smaller base units and everything is run from a main server and alsoan upgrade from Windows 2000 to Network. Problems started after this and the IT guy did update the printer driver.
Please would anyone be able to assist? Any help for this frustrating problem gratefully accepted!
Thanks,
Saxplayer67

So the issue with the 8000 printer is periodic print jobs do not come out as you are wanting them. Is that right? This is interesting, just from the point of view that generally speaking issues like this are like a light switch, they are either there or they are not - they usually don't come and go. That being said, we are going to see what we can do to resolve this. First I am going to recommend that we perform a clean installation of the printer after uninstalling it from the machine. By the way, what is the operating system you are working with - Is it Windows 2000 Network?
First if you use a USB cord, make sure to remove it. Do not plug it back in until the software directs you to. Then go through the Devices and Printers, Programs and Features and Device Manager folders and insure that all copies, files, and programs related to the printer are removed. Then as directed, restart the computer.
In the START menu type "%temp%" and press ENTER. Here I want you to press Ctrl+A and hit DELETE. Some of the files will not allow you to delete them, skip those files and delete the majority that allows it.
Then follow this link to download the full feature software and drivers for the printer:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&lc=en&dlc=en&product=3762364
Install that and let me know the result!
Have a great day!

OJ 8000 prints alignment page with every job

Similar Messages

Maybe you are looking for