OJ Pro 8625 will not print in color only shades of gray

Printer was purchased two days ago. The printer will not print in color only black and shades of gray. alignment test on 2/28/15 showed color. cartridges show full.

Hi there @ChuckHilde
Welcome to the HP Community
I saw your post about how you cannot print in color, and I would like to refer you to try the steps I previously recommended in another thread. The printer itself prints in color, therefor there is most likely settings on your Mac that need to be changed.
Click here to get to that thread and try the steps: Re: Printer Only Prints Pictures in Black & White
You should be able to print in color after those steps!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Similar Messages

My hp deskjet 842c will not print in color only in black

Until the other day, my printer was working quite well -- printing in colour or black. It seems that I ran out of ink in my colour cartridge and upon replacement, the printer would no longer print in colour. I replaced the colour cartridge again thinking that maybe the replacement cartridge was defective but the problem still persists -- the printer simply will not print any colour. I am running Windows 7 Home Premium version 64 bit.

You can check the ink levels here:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02693389&tmp_task=useCategory&cc=us&dlc=en&lang...
The driver for this printer, when used within Windows 7, is built-in or 'in-OS' so you do not have access to the HP solution center or HP Toolbox.
Printing the self-test report will show how the ink is dispensed and what levels of ink are available. If on this report there is nothing shown, the issue is likely related directly to the cartridges rather than a software issue.
If this is the case, visit this article and browser towards the bottom:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=bud02948&tmp_task=useCategory&cc=us&dlc=en&lang=...
There are steps on how to clean the cartridges as well as the underside of the carriage in case there is and debris or interferrance causing this issue.
Help the community by marking this post as a solution if it solved your issue!.
If my post helped you in any way, please click the blue KUDOS star under my name! It would mean a great deal.

Officejet Pro 8620 will not print old documents, only newly created ones

When I use the driver designed for the printer I can only print documents (Word, Excel, and Publish 2007) that are new, as long as I have not copied and pasted or inserted sheets from previously created documents. It will not print any Outlook 2007 emails but it prints PDF's fine. Also, the printer works fine with driver for deskjet 990c but limits my options on page size and the margin on the right side won't change and are way to big for most of my documents. Any thoughts?

This is very peculiar @bmphr
Running the Print and Scan Doctor might help. The HP Print and Scan Doctor is a free utility (tool) that helps to quickly resolve common printing, scanning and connectivity issues including but not limited to:
Connectivity:
USB: Verifies that the USB connection from your computer to the HP product is working correctly.
Network: Verifies that the network connection between your computer and your network is working correctly.
Device Status Test: Checks for device errors such as out of paper, paper jams, carriage stalls, and paper feed issues, and then provides instructions for fixing the error.
Driver Check: Checks for missing or corrupt driver files.
Device Manager: Checks for problems in Device Manager that would prevent printing.
Device Online: Checks if the product has been paused or set to offline, and then sets the status back to online if necessary.
Print Queue: Checks for and clears pending print jobs in the print queue (a log of print jobs waiting to print).
Port Match: Checks the port settings for the HP product.
Device Conflicts: Checks for conflicts with other drivers, such as other printer brands.
Ink Issues: Checks the cartridges and ink levels for issues that affect print quality.
Print Settings: Checks and adjusts the print quality settings.
Test Print: Prints a test page for print quality evaluation, and provides options for cleaning and aligning the printhead if necessary.
Scan Tests: Checks the scan mechanism, drivers, and registry entries.
Source:Try the HP Print and Scan Doctor for Windows
Click here to download and run the Print and Scan Doctor> >>>>> www.hp.com/go/tools
If that does not resolve the issue, post back and let me know if there are any symbols other than green check marks and what they are next to of course. The wrench is not always easy to spot as the wrench and the check mart are in the green circle.
If you see only green check marks (), the tool did not find any problems.
If you see green wrenches (), the utility identified an issue and corrected it automatically.
If you see yellow exclamation points (), the test failed and required user action, but the step was skipped.
If you see a red X (), follow the on-screen instructions to resolve the issue.
Thanks, I look forward to hearing back from you.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Officejet pro 8625 will not print

Just purchased this printer. Scanning, faxing, email to printer all works fine. When I try to print any document it spools then deletes the print job as if done but doesn't print. I have uninstalled/reinstalled, run the diagnostic test and nothing is fixing it. Very frustrating and on the verge of returning the printer to Costco!

Hello , Welcome to the HP Support Forums!
I understand that you're not able to print from your Windows Vista computer to your HP Officejet Pro 8625 e-All-in-One Printer. I would like to assist you today with resolving this printing issue. Because you are able to scan from your computer I do not believe that the issue that you're experiencing is connectivity or software related. Rather, it does sound like a driver conflict is occuring between your Windows computer and your printer. To confirm if this is the case, can I please have you follow the steps below to install an alternate print driver on your HP Officejet. You will not lose any functions by utilising this alternate driver. Step 1: Clear Temp Files: Click on your Start menu
In the 'search programs and files' box located right above Start after you click on it, type %temp% and hit enter on your keyboard
When the Temp folder opens, select Ctrl + A at the same time on your keyboard. Everything in this folder will now highlight.
Select the 'delete' button on your keyboard. The Temp folder contains temporary internet files. No actual files or folders on your computer will be affected by deleting the Temp files. Should a Temp file still be used than you will automatically get the pop up to 'skip' that item.
Close the Temp folder once it is emptied
Right click the Recycling Bin on your desktop and select Empty Recycling BinPlease proceed to the next step. Step 2: Load Alternate Driver: Please click here to download the Officejet driverOnce the download is complete you may get a prompt to Run the download. If you see the Run prompt, please allow it to Run.An extraction should now occur. Once the extraction is complete an installation window may pop open. Please close any install windows. You do not want to run an installation.Next, click on your Start menu. In the 'search programs and files' box type %temp% and hit enter on your keyboardWhen the Temp folder opens locate the 7z folder. Click on this folder to open it. It should include files that say OJ860At the top of this folder you will see a file path bar. It may show something like 'Computer- Local Disk C - Users - AppData - Local - Temp - 7z . . . ' Left click on the right hand side of this file path bar at the top. The file path should now highlight.Right click on the highlighted file path and select CopyClose the Temp folderClick on your Start menuSelect Devices and PrintersRight click on your HP Officejet Pro 8625 e-All-in-One
Left click on Printer PropertiesLeft click on the Advanced tabLeft click on New DriverWhen the New Driver window opens please hit 'Next' until you see a list of Manufacturers and PrintersClick on the 'Have Disk' button on the bottom rightWhen the 'Install from Disk' window opens, simply right click on the file path bar and 'Paste' in the file path we previously copied.Click OKWhen prompted choose the HP Officejet 8600 Printer and click 'Next' until the Add Driver window closesUnder Printer Properties select Apply, but don't hit OKSelect the General tabRename your printer back to HP Officejet Pro 8625 e-All-in-One
Hit OK Now that the alternate Officejet driver has been loaded, please test printing to confirm if the printing issue has been resolved. Please respond to this post with the result of your troubleshooting. I look forward to hearing from you. Good luck!

My printer will not print in color, only black and white.

I have an Epson NX 420. I have set it up to my laptop, and am able to print off of my computer. But when I go to print a document out of pages, even though it says it is in the color mode it only will print out in Black and White. Is there something I should be downloading? I do know that the printer can and does print in color, because everything works perfectly fine on my Windows computer.

There are a few things to check:
Make sure the blue tape has been removed from the nozzle plate.
Print a diagnostic page as shown in method 4 here. Does this page print color? If so the issue may be your driver settings. Check for a "Print in grayscale" setting and uncheck this box.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

My HP Pro 8500 will not print in blue. All new cartridges installed.

My HP Pro 8500 will not print the a blue color, it comes out pint where it should be blue. Installed all new cartridges and still does the same thing.

Hi Calabasas,
Welcome to the HP Forums!
I understand that your printer is experiencing a defect in the print quality, and I would be happy to assist you!
Please follow this document on Troubleshooting Print Quality Issues. If you have completed all of the steps in troubleshooting and the blue still comes out as pink, please call our technical support at 1-800-474-6836. If you live outside the US/Canada Region please click the link below to get the support number for your region.
http://www.hp.com/cgi-bin/hpsupport/index.pl
I hope this helps!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

HP Officejet Pro 8625 - Will not acknowledge incoming fax while in sleep mode

HP Officejet Pro 8625 - Will not acknowledge incoming fax while in sleep mode. The sender receives an error "no answer".
When I call the fax number, if I touch the screen it will wake up immediately to receive the fax.
Printing from the computer while in sleep mode works fine.
Please advise. Im missing important faxes and can only set sleep mode to a maximum of 15 mins, so I have an alarm set to touch my machine every 15 mins. sigh...
Thank you,

Hi Willia,
Welcome to the HP Support Forums! I see when your HP Officejet Pro 8625 enters sleep mode, you are unable to receive any incoming faxes. The senders will receive a 'no answer' error. I understand your printer will wake up from sleep mode if you send a print job.
First let's go ahead and make sure the OJ 8625 is plugged directly into a wall outlet, using a power bar or surge protector can cause the printer to lose basic functionality over time. To get a better understanding take a look here: Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector
Now, I would like you to update your printers Firmware, click on the link below and follow the on screen instructions:
HP Officejet Pro 8620/8625 Firmware Update
Are you now able to receive incoming faxes when the OJ 8625 is in sleep mode? If not, I would like you to contact our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
http://www.hp.com/cgi-bin/hpsupport/index.pl
I hope this helps!
Thanks,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Photosmart c4780 will not print in color

Brand new to forums... I am using a MacBook Pro, OS 10.6.8. I recently bought a used photosmart c4780. The owner said it only prints black. When I set everything up, it wouldn't print at all, as the black ink was depleted. I replaced the black cartridge and now it prints. However, even though the color supply levels are at about half full, it will not print in colorI receive no error messages. Have tried different settings in the Print dialog options to no avail. Have not been able to find anything online that addresses this exact issue within the parameters as I've described them. Any help appreciated.

Hi tomanifest,
The document at the link below will assist you with the warranty end date of you color cartridge.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00206040&cc=us&dlc=en&lc=en&jumpid=reg_R1002_US...
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

HP Laserjet 300 Color MFP m375nw will not print in color

My HP Laserjet 300 Color MFP m375nw will not print in color. First it would not even print (has something to do with Google Chrome). I uninstalled the program and tried to reinstall the program but it will not complete the whole installation process. Says it has an error, took to long to run. But the Printer is in the DEVICE section, but not in the PROGRAMS on the Control Panel. When I go to print now, I press (Ctrl, Shift, P) and it will on print in Black no Color. If I go to print the normal why and select, I hit Print and then it ask to select a Printer and there is no Printer to select.

My HP Laserjet 300 Color MFP m375nw will not print in color. First it would not even print (has something to do with Google Chrome). I uninstalled the program and tried to reinstall the program but it will not complete the whole installation process. Says it has an error, took to long to run. But the Printer is in the DEVICE section, but not in the PROGRAMS on the Control Panel. When I go to print now, I press (Ctrl, Shift, P) and it will on print in Black no Color. If I go to print the normal why and select, I hit Print and then it ask to select a Printer and there is no Printer to select.

Have a wireless printer and will not print in color, prints black

My wireless printer will not print in color, prints in black & white

Have you contacted the manufacturers support?
Clinton

My Photosmart C6280 will not print in color.

My Photosmart C6280 will not print in color.All ink levels are good. Factory defaults clicked. Did I override something without realizing it? I don't see anywhere to click for grayscale. I am using an APPLE AIR....I have also turned the printer off and on again..

Hi there @Ashley31 , welcome to the forums
I read about how you cannot print or copy in color. Not copying in color is concerning, as the copy is a stand alone function that does not involve the computer in any way.
I'd suggest power resetting the printer:
Press the Power button to turn on the product.
With the product turned on, disconnect the power cord from the rear of the product.
Unplug the power cord from the wall outlet.
Wait at least 15 seconds.
Plug the power cord back into the wall outlet.
Reconnect the power cord to the rear of the product.
If the product does not turn on by itself, press the Power button to turn it on.
You can also remove the ink cartridges and reinsert them and try a color copy again to see if that helps.
If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you, such as a replacement or trade in. If you are calling within North America, the number is 1-800-474-6836 and if you are calling outside of the US/Canada region,: click here.
Best wishes to you
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

My HP B210e will not print in color.

My HP B210e will not print in color. It does not copy in color either. I have added all new cartridges and the levels read good. Any help with this will be much appreciated.

Hi there @Ashley31 , welcome to the forums
I read about how you cannot print or copy in color. Not copying in color is concerning, as the copy is a stand alone function that does not involve the computer in any way.
I'd suggest power resetting the printer:
Press the Power button to turn on the product.
With the product turned on, disconnect the power cord from the rear of the product.
Unplug the power cord from the wall outlet.
Wait at least 15 seconds.
Plug the power cord back into the wall outlet.
Reconnect the power cord to the rear of the product.
If the product does not turn on by itself, press the Power button to turn it on.
You can also remove the ink cartridges and reinsert them and try a color copy again to see if that helps.
If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you, such as a replacement or trade in. If you are calling within North America, the number is 1-800-474-6836 and if you are calling outside of the US/Canada region,: click here.
Best wishes to you
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

MY printer will not print in color

My laptop and printer are only printing in black and white will not print in color. I have tried printing with a different laptop and it printed the pictures in color.
Can you please help !
Regards,
Aido2014

Hi there @Aido2014 ,
Welcome to the Community!
I read your post about one of your computers will only print black and white, and not in color. I am writing you back to make my suggestion to you.
I would suggest trying these steps to hopefully get the color printing again: Fixing Print Quality Problems for the HP Deskjet 3050A (J611) All-in-One Printer Series
If everything appears to work fine from that guide, and you still cannot print in color, try running the Print and Scan Doctor. This diagnostic tool will check for any conflicts that could be causing the issue. The tool will show you a report at the end. If there was a problem that the tool could not fix, you will notice it in the results.
Please keep me posted with your results and I will help out some more if needed!
Have an awesome Friday!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

TS3147 My HP printers will not print in color.

My MacBook will not print in color either with my old HP 6122 or my HPEnvy 120. Any solutions?

Hey Sarah24,
Thank you for the information. From this it sounds as though the issue is with the preference files for the printer are taking over. There are some long steps that need to be taken.
To start off, you will need to reset the printing system of the Mac. Now if you have more than one printer, you can skip this step. If you only have the one printer, I have included the document 'OS X Mavericks: Reset the printing system' http://bit.ly/1bS2qrh.
After this you will need to uninstall the software. Again if you have more than one HP printer installed, please just go with the normal uninstall. If you only have the one HP printer, to do a full uninstall of the software, please follow the steps below.
1. Open the HP folder in the Application folder
2. Open up the HP uninstaller
3. On the page that has you click the uninstall button. Hold Control, Option, and Command, then click uninstall. NOTE: if you have more than one HP printer just click uninstall, without holding down the three keys.
4. Follow through the rest of the uninstall
The next step needs to be done either way. This step is the verify and repair of the disk permissions. I have included the document 'Disk Utility 12.x: Repair disk permissions' http://bit.ly/1bjFnnP. After the repair of the permissions has been completed, please restart the Mac.
Once the restart has completed, you will need to reinstall the software. I have included the link to 'HP ENVY 120 e-All-in-One Printer Full Feature Software and Drivers - OS X 10.9 Mavericks' http://bit.ly/1emTqaj. Please make sure that you either choose recommended install, or all the extra features, such as scanning.
Now once you have the software successfully installed, please click on the Apple Icon, and then on Software Update. Please install all updates that are available to you.
Please let me know the outcome of the troubleshooting.
Thank you.

HP ENVY 7640 Will Not Print In Color On A Mac

I purchased an HP Envy 7640,I'm running 10.6.8 on my Macbook pro, I can't install the driver for the printer on my computer because it says that it is not compatible. Nevertheless I am able to print, but it will not pint in color. Is there any solutions that I can try?There are no

Hi MrsLoghouse,
I would like to help you print from Word on your Mac. Because you can print from other programs, I trust the issue is not actually related to the HP Printer. Damaged documents or documents that contain damaged graphics or damaged fonts can cause print errors. Before you reinstall drivers or software, test the program's ability to print.
1. Open a new blank document in Word.
2. On the first line of the document, type the following text: =rand(10)
3. Press ENTER. This inserts 10 paragraphs of sample text.
4. Try to print the document.
5. If the document prints successfully, change to a different font, or insert clip art, a table, or a drawing object. How to troubleshoot print failures in Word for Mac, Excel for Mac or Powerpoint for Mac.
If the issue persists, I suggest you contact Microsoft, or reach out to the Microsoft Community.
I hope this is helpful.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

OJ Pro 8625 will not print in color only shades of gray

Similar Messages

Maybe you are looking for