OJ Pro8000 thin black line appear when using photo paper but not regular paper

When using both my OJPro 8000 and my wife's OJPro8500, thin black lines appear every 7/8" on the paper when using photo paper.  This does not happen if I print on regular bond paper.

Anything?  It's only happening in Photoshop, other apps print fine.

Similar Messages

  • Thin black line appears when applying transition to material

    Im editing in PremProCC and have a problem with the video transitions especially the wipe effect. When I apply the wipe to a cropped jpg and play it back a thin black line seems to appear around the edges of the jpg. I thought it might have something to do with rendering but the render bar reminds yellow when I apply the effect. It also in the exported version too. Any help I've never seen this before?

    Hope you can see the thin black line  its more noticeable when it's playing back. Its just after the Bes/sy letters on the left had screen.

  • Black line appearing when using Magic Bullet

    I have installed the latest Magic Bullet suite and it all works fine within Premiere, except when I apply a Look. In the Looks Builder the image looks fine. However, when I go back to Premiere a black line appears on the left hand side of the image. In the Effects Control if I click on 'Motion' or the effect itself, 'Looks', then the black line disappears, but it then reappears when I click off or try and render the image. It is unclear whether the error is in Premiere or with Magic Bullet. I am working with HDV widescreen footage. Any advice would be greatly appreciated.

    Make sure that the properties for LooksBuilder.exe are set to run in Windows XP (Service Pack 2) compatibility mode. It may help. If not, provide a lot more details and start with the 16 questions at the end of the included Wiki link:
    Some suggestions

  • Extraneous line appears when using Zig Zag effect

    This is the procedure that I'm using:
    1. Create 3 horizontal lines with only a stroke color, no fill. Each line is a different stroke color.
    2. Using the Blend tool, blend the three lines to get a nice linear gradient.
    3. Make an Art Brush from the 3-line blend.
    4. Create a path, for example, just a straight line, and apply the new brush.
    5. Choose Effects > Distort > Zig Zag with Smooth turned on. If the zig zag is shallow and diagonal line appears in the path that does not belong, ruining the effect. The extraneous line will print, so it's not just something that appears on the screen.
    Is there any way to avoid this? If the bumps in the wave are steeper, the diagonal line doesn't appear.

    Hello Jay,
    <br />
    <br />What I did is to use really small circles (3 Circles: Red, Yellow, and Blue) Blend them together with specified steps of 100 (Option+Blend Tool+Click). The amount of steps depends of the distance between each circle.
    <br />
    <br />Then I created the "Art Brush" and apply it to a straight line.
    <br />
    <br />After that, I rotated a copy of the line 45° and a third line another 45° (this will make 90° with 3 lines).
    <br />
    <br />Selected the Vertical and Horizontal lines, then select the "Zig Zag" effect and set the values that you want. The diagonal line I reset the size of the "Zig Zag" effect to very low value.
    <br />
    <br />After that I use "Convert Anchor Point Tool" (Shift+C) to smooth the curve of the blending. To have better results I suggest to use more than 3 lines to make a 90° turn (Just keep in mind that the middle lines should have a "Zig Zag" effect size of low value.
    <br />
    <br />
    <a href="http://www.pixentral.com/show.php?picture=1fm7KrGLb3VxTRWESwjMVlnShprH" /></a>
    <img alt="Picture hosted by Pixentral" src="http://www.pixentral.com/hosted/1fm7KrGLb3VxTRWESwjMVlnShprH_thumb.jpg" border="0" />
    <br />
    <br />But another solution is to first make the Mask of the shape that you want, create a Rectangle with the gradient that you want and use the "Envelope Distorted" ("Envelope Distorted"+ "Make With Warp" + Style "Arc"). Please make sure that you already selected "Distort Linear Gradients" under "Envelope Options"
    <br />And then make the mask.
    <br />
    <br />
    <a href="http://www.pixentral.com/show.php?picture=1vG69C4xb8gausk6fxfmkMOE4ggtzB" /></a>
    <img alt="Picture hosted by Pixentral" src="http://www.pixentral.com/hosted/1vG69C4xb8gausk6fxfmkMOE4ggtzB_thumb.jpg" border="0" />
    <br />
    <br />
    <a href="http://www.pixentral.com/show.php?picture=1IUevEolmMjG7JkjMAKgf2N4zlb0" /></a>
    <img alt="Picture hosted by Pixentral" src="http://www.pixentral.com/hosted/1IUevEolmMjG7JkjMAKgf2N4zlb0_thumb.jpg" border="0" />
    <br />
    <br />I hope this helps!

  • Photomerge produces white lines when using RAW (PEF) but not TIFF

    I just started using PS CC (Mac, v14.1.2) and tried out Photomerge with a set of 40 (4 rows, 10 cols) raw images (Pentax PEF format), resulting in a 0.3 gigapixel image.
    When I have them stitched by Photomerge, I see fine white lines at the merge points.
    I had enabled all 3 options (blend images together, vignette removal, geometric distortion correction), using cylindrical layout.
    When I first convert the PEFs to TIFFs and use Photomerge with the same options, there are no such white lines.
    An example of the bad output:
    These unwanted lines are, of course, at the edges where the images are getting joined.
    Also, when using only a few images (2x2 or 3x3, or even 4x5), I do not get this effect.
    I noticed that when using less images, the blend masks' edges are not straight - but they are when I see this issue. This suggests that at some point the merge operation gets overwhelmed and switches to a simpler algorithm, which in turn has this "bug" with RAW images, apparently.
    Is this a known issue, and is there a way to get this working right with this many RAW/PEF images?

    tempelorg wrote:
    csuebele, that link only directs me to http://feedback.photoshop.com/photoshop_family, which is clearly not a bug report form but yet another "open" discussion forum, it seems.
    Sigh. How can Adobe charge so much money for their products and not even afford a team of people to look into bugs that users might want to report. Big companies suck.
    Although you were probably looking for a standard developer-type bug report form, you still might want to take a closer look at that site. You'll see numbers next to the topics; those are user votes to help get something fixed sooner. While it's one thing to submit a bug report (and from this thread it seems they might already have it), Adobe uses that site to help prioritize which bugs to fix first, based on the user discussion and votes. Because Adobe has to decide not only whether a bug needs to be fixed sooner than other bugs, but sooner or later than certain feature requests. The user discussions and user votes on that site help them decide, although I'm sure there are other internal considerations.
    In addition to votes, you'll see that posts on that site can be marked "Acknowledged" or "In Progress" by Adobe. The user votes and status reports are what make that site a little more quantifiable than this forum. Also, it isn't unusual to see Adobe developers and employees in the threads looking for more info or explaining things. So while it might not look like a traditional bug database, it's along those lines but in a way that makes it a little easier for non-technical users to participate in the process.

  • Error 1003 when using excel reprt, but not Word

    I am trying to use the MS Office Report vi to send my data to an Excel. I am using Labview 7.1. 
    When I place the VI on the block diagram I get the following message: (Also attached)
    Error 1003 occurred at Open VI Reference in ex_RGT_Get
    Bookmarks and named cells.vi->Configure MS Office
    Report.vi->Confugure MS Office Report.vi.ProxyCaller
    Possible Reason(s):
    The VI is not executable. (OK Dialog box)
    If I click OK, the " Configure MS Office Report pop up window is mostly grayed out . If I select "Basic report for Word" I have no error message.
    I am using Excell 2003.  The problem is with a laptop computer I am using. I do not see this problem with a desktop computer. 
    Thanks,
    Bill
    Attachments:
    MS Report 8-24.doc ‏80 KB

    Hello Bill,
    You are not trying to build an executable, just use the Express VI in a regular development VI, right?  If so, this link describes the troubleshooting steps to get rid of this error.
    Regards,
    Clint M
    National Instruments

  • Airtunes drops when using Windows XP, but not Mac

    We're currently using the AirPort Express as our wireless router, and everything works great from a connection standpoint. No problems with our MacPro or XP laptop.
    However, when using XP to play AirTunes, the audio constantly drops out (itunes will pause, and then come back within a few seconds, green light on the APX stays lit). We've tried closing all other programs & processes, and even uploaded the 6.3 firmware for Windows, but still get the drop-outs. Never once had a problem with the Mac, even after the firmware change.
    Also tried using a Linksys wireless router as our hub and connecting the APX to the network. same issues.
    I haven't been able to find anything on the site about this, anybody else having this problem?
    MacPro   Mac OS X (10.4.9)   Toshiba Laptop w/ Windows XP

    I'm experiencing something similar.
    I have a TECOM wireless router with a a single win XP PC connected and two airport express stations for playing music remotely.
    Green light still on, but iTunes frequently loses sight of the remote speakers after some period of time.
    The solution thats often works is to disconnect and reconnect XP to the wifi network. But I'm not really happy with this (boring) method.
    If anyone knew a setting that could help...

  • From the initial screen when I select Video Editor, new projects there is a purple and black line appears below the new project but the program does not open up.

    Please help me with the above problem.

    What operating system are you using?
    Have you manually gone to the nVidia or ATI web sites and downloaded the latest drivers for your video card?

  • Veritical line appears when using Camera on my iPhone 3GS

    My iPhone 3GS camera shows a vertical line on the left every time I activate it. Any suggestion to fix it is appreciated. Thanks!

    check your other app folders and screen.
    check restrictions, if the above don't work then do this:
    settings - general - reset - reset home screen layout.

  • How can I improve the quality of a photo that appears blurry when used in iMovie but not in iPhoto?

    A 320 x 240, 35 KB Jpeg file looks crisp and in focus in iPhoto.  But as soon as I put it into iMovie and hit full screen, it's blurry and looks terrible.  A photo taken with my Nikon D7100, a 3872 x 2582, 2.5 MB Jpeg photo translates to the big screen just fine, with perfect clarity.  How can I use this former picture but increase its clarity when it's magnified in iMovie?

    Apologies for opening this up again:
    I rasterised and embedded the photos, liked what I saw and marked the question as answered, then I zoomed out and lo! The white jaggedy edges are back! This is despite the fact I rotated them to vertical before rasterising them.
    It appears that the pixels in the rasterised image are relative to the screen, not relative to the object... so when I rotate the photo it goes back to the original hi-res photo and re-rasterises it to fit the new orientation.
    Also doing this has not lowered the filesize at all... It does appear that when you rasterise an image in Illustrator, the new raster is only a veneer, the original (hi-res photo) is still lurking in the background.

  • Pop up windows appear when using RP Data but the window is empty IE no data is displayed. How can I fix this?

    The real estate information web site, RP Data, has a mapping feature that should display a site map of the property being searched in a pop up window and it is this particular pop up that doesn't work; other pop ups work EG Google Street View.
    Please note that this is a members only web site.
    Any thoughts or assistance would be greatly appreciated.
    regards
    John

    Hi John,
    I am an employee at RP Data and have the solution to your problem.
    The mapping feature requires a free Java plugin for your browser. Please navigate to [http://java.com/en/ http://java.com/en/] and click on the ''''Free Java Download'''' link. Once installed close and reopen your web browser before loggin into RP Data and loading the map.
    If you run into any problems please contact our support team on 1300 734 318 who will be more than happy to assist you. Alternatively you can launch a support web chat feature via the rpdata.com website.
    Kind Regards,
    Daniel

  • Keynote PDF Export - black text appears white on some computers, but not all - why?

    This problem seems to have been going on forever, why is there STILL no solution? I'm really keen to mover over to Keynote, cos Powerpoint is very cumbersonme and frustrating in my experience, but I'll only ever use Keynote to export PDFs for presentations, so if it can't even get this basic function right, there's really no point in abandoning Powerpoint - at least I know my docs will come out fine and won't have to be embarrassed when clients come back to me frustrated cos they can't read the text!
    Any thoughts?

    That would because some of the colors you are using are RGB and are being converted to cmyk.
    Make a color swatch in the Color specifier and set the ICC profile in the small rainbow square next to the pull down menu in the color sliders tab.
    Then use that color swatch in set styles to ensure you have the same color set on all your objects and text.
    You should not be using jpegs if you want to ensure an exact color. jpegs are not suitable for flat areas of color.
    Peter

  • PS CS5.1 crashes when using file open but not with bridge or "open as smart object"

    I'm using a Mac with Snow Leopard and Photoshop CS5.1 Extended
    When i try to open a file largen than ~50MB with double click in finder or with file>open in PS, the program loads the psd and shows it, then 2-3 seconds later PS crashes. If the psd is under ~50MB everything is fine.
    If i open it with file>open as smart object or via the mini bridge, everything is fine, and i can work with it.
    How can this be fixed?

    Make sure you submit your crash report as it helps us track and resolve code for crashing issues.
    Submitting Crash Reports: http://adobe.ly/gNJWVY
    If you post one of you crash reports here?
    Location of Crash Reports:
    Users/<your user name>/Library/Logs/CrashReporter

  • I cannot click on tabs in any website, do you know why? I can do it when using Internet Explorer but not firefox.

    I have used Mozilla Firefox for years, but all of a sudden I cannot put my curser over a tabs on any website and click on it. What I mean is the top of the websites have words you can click on to go to other pages or in the email system it has tab buttons that allow you look at your inbox or close or save draft, it doesn't allow the curser to click on it. I can go to the tool bar put my curser in that and use the tab button on the key board to tab over to each word or link and then click enter and it will then go to that next page.

    Both the Yahoo! Toolbar extension and the Babylon extension have been reported to cause an issue like that. Disable or uninstall those add-ons.
    * https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

  • When I print a 4x6 color picture using an iMac with the latest operating system using a Canon MX892 printer, faint black lines appear every 3/16 of an inch. When I print the same picture using iPhoto there is no problem.

    When I print a 4x6 color picture using an iMac with the latest operating system using a Canon MX892 printer, faint black lines appear every 3/16 of an inch. When I print the same picture using iPhoto there is no problem. Any suggestions?

    What is the resolution of the picture that you are trying to print?
    Go to Image>resize>image size, read the resolution in px/in, then report back, please.
    Also, are you in a position to try printing with another printer in an attempt to narrow this down?

Maybe you are looking for

  • Help define table

    Hi All, I've asked this before, but did not get the answer I was hoping for; maybe I didn't state my problem clear enough. Let me ask again. If I have a table as below(format is: int, string, string): 1, Todd, Smith 10, Chris, Lee 5, Sue, Wilson How

  • Screen resolution in BSP

    I created a BSP with the following values. Staff  Contractor   Staff/Contractor Role   Staff/Contractor No   Name   Contact No         staff/contractor : radiobutton Staff/Contractor Role -char 40 Staff/Contractor No -char10 Name - char40 Contact No 

  • Whats the biggest hard disk my PowerMac G5 can hold?

    Greetings! I got a hold of a PowerMac G5 recently, rather cool machine! Anyway, i want to use it as a fileserver and also for backups of me and my family members computers so im going to need some big hard disks! Unfortunately PPC macs wont boot from

  • Invoices with type of applied sum

    Hello, I need urgently information for internal audit: I need to show all invoices and "origin of applied sum". For example - if the applied sum comes from bank payment, from JE upload or if it has some other origin. Simply speaking - I need to show

  • Where is the Trash in Mail?

    I have searched all over preferences and under main menu drop down menus. I cannot find an option to show a Trash mailbox. And yet, Under Accounts - Mailbox Behavior - Trash, there is a checkbox to "Move deleted messages to the Trash mailbox." I see