Ok, error code 6 and error code 3
hello all,
I can read discs and watch dvds. however, when i attempt to write, i started getting an error code 6. so i removed 3 preference files, and started to get an error code 3.
the wierd thing is that sometimes i can burn a cd, but most of the time not.
I am in the middle of re-installing osX, but i know the problem will return again.
any advice?
Did you check your secuirty software settings?
Error 6: All of the steps in this article apply to this issue. Following Troubleshooting security software frequently resolves this error. There may be third-party software installed that modifies your default packet size in Windows by inserting a TcpWindowSize entry into your Registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet size modification for assistance or follow this article by Microsoft: How to reset Internet Protocol (TCP/IP).
copied from iTunes: Specific update and restore error messages
Similar Messages
-
I do a system restore which allows me to open my browser. Without this I cannot open my browser - the error code comes up every time.
Do a clean (re)install
* Download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
* Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
* Don't remove personal data when uninstalling.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
From https://support.mozilla.com/en-US/questions/764376 -
My ipod touch is not listed as a device when connected to my computer. As suggested I attempted to download the latest of itunes. I got an
ox8007054f error code and the down load will not complete. I have also tried to restore my computer to an earlier setting, but it will
not accept the change.Have you looked at this completed previos discussion. It discusses 0x8007054F.
Re: Error message when trying to install iTunes -
okay so a few days ago i received and email for one of my colleagues to do some final editing to a music video. the folder contained 2 videos a rough chops and the main which was about 2-3GB which i dragged on to my external hard drive . and at the time i was trying to install a trial version of parallel lines and me being a newbie to the software i didn't know i need windows installments for it to run lol but yeah... so i was just getting frustrated with the software i kept installing it uninstalling it and then i was thinking my the problem might be because my MacHD space is low (less then 40GBs on my MacHD), so.. i installed it on my hard drive where all my important files are (I'm a graphic designer and do light video editing) video projects and many photoshop projects form 2007 and logs and just a bunch of important files in my hard drive. so because i was so frustrated with the software i wasn't thinking and i installed it on my external 2TB hard drive. and when i realized parallel wasn't working i gave up, uninstalled the program form the hard drive and for some reason when i did that and i tried opening the video my friend had email to me and for some reason it did load up but a few seconds maybe about 10sec in the video is froze and closed my media app (VLC) and when i tried opening other video files it would freeze every few minutes but those specific files i had drag in last were not playing after at least 5 secs and eventually didn't open at all so i restart my computer login and now i get scared i see that my MacBook Pro isn't reading my external hard drive so i search threw forums... i unplug from the wall plug my external hard drive back in my computer and it loaded up but when i opened my external hard drive all my files had that plank white paper icon on my folders (because i have everything organized but subject when you open then drive folder. so... i go in to my projects and nothing, i open my edited photos and nothing... my hart feels like its about to drop and i keep opening files and there is nothing in them, but in "get info" of my drive it shows that there is filled so i go to "disk utility"... i "verify disk" passes ..."repair disk" doesn't past.... i look it up in forums... so i reboot my computer and go to the safe recovery menu. go threw the same ting "disk utility"... verify, pass... repair, pass... so now i feel relieved. i login files in the ext. hard drive load up i tried again to open the files and same thing happens... so now I'm thinking its the files i drag the files to the trash and try to empty and its gone i reboot the computer and my drive didn't load up so i tried unplugin it and back in... drive comes up i notice theres trash.. i tried emptying it and i get the error code -50. and no files are popping up on my external drive and i try to repair/unmount disk and the verify disk doesn't pass and when i click repair disk it doesn't past and another error code pops up -35.... so i felt my drive alone for a few days and yesterday i go the files deleted from the trash and now I'm not getting any codes but when i try to unmount.verify/repair the disk. keeps letting my tits need to be repaired so i click the repair button another error unable to unmount volume to repair...
what do i do? my files still don't show up. and I'm very sorry for the long paragraph but i have to be detailed for you to understand my situationRead this.
-
I have an iPhone 4. It is in great condition, always protected. A couple months ago, it randomly went black and wouldn't turn on. I put it in recovery mode, plugged it in to my MacBook Pro and would get error code 2001 then I'd get error code 2006. I read some different forums and many people said to try using a different USB port and different cords. The last cord I tried, worked and my phone was back. Last night, my phone did the same exact thing. So I used the same method I used last time, however nothing has worked. I tried plugging it in to a PC and that didn't work either. This seems like a hopeless problem that's going to continue to happen. Any advice?
Soooooooo.... You obviously need to restore the device
It seems that you have tried several options to restore it. What I would do is leave it plugged it and hold down the Home button AND the Power button together till you see the white apple appears. Then let go of the Power button but continue to hold the home button. You should get the message in iTunes again saying that the iPhone needs to be restored. Hit OK then RESTORE.
Hope this helps!! -
I have been trying for 2 days now to get this resolved.
Computer hashard wired internet connection, running Windows 7 Home Premium. No other issues with downloading or uploading from any other sites or programs. No other network issues reported on other computers.
It started when I went to install Lightroom through my Creative Cloud. It prompted me to update my Creative Cloud Desktop App, which I went to do and then promptly got Error Code 201. I restarted my Creative Cloud and then skipped the update, hoping it was just an issue with that specific download. I clicked to install Lightroom and the same thing happened, Error code 201.
I restarted my machine, and tried again. Same issue.
I contacted Support. They had me go in and change a bunch of folder names to and add "old" to the end of them and then had me try using the Adobe Cleaner tool, which did not work. He had me go in and change some internet settings, still nothing. Same issues as before, only now with all the renaming of things I cannot even open programs I had previously been able to open like Photoshop.
He instructed me to reinstall the CC Desktop App because the Cleaner tool was not recognizing that it existed anymore (probably something to do with renaming files.. just saying) and now I get the 201 Error when I try to reinstall the CC Desktop App.
I ran out of time and had to stop after being on with them for over an hour.
Today I contact back and was instructed to create a new user account on my computer and try downloading and installing the application in the new user. Same errors. 213 at first, restarted my computer and then got Error Code 201 again.
I am getting really frustrated and really behind on my work. Any information someone could give me would be greatly appreciated. Currently waiting for a chat person to be available again.
Thank you for your time and assistance.Meowia for Error 201 please see Error downloading Creative Cloud applications - http://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html. Error 213 indicates there was problem locating the update or an incorrect URL. The troubleshooting steps are still the same as both errors are related to failure of the current network connection.
-
Photoshop Elements 12
Adobe Photo Downloader has encountered a problem and needs to close. We are sorry for the inconvenience.
Error Code: c0000005
Address: 75e32f71
I clicked on the OK button and the downloader closed.
I did a search on this error code (c0000005) and there seems to be a workaround but no solutions, why is this? I ask that because this problem seems to be years and years old, going back to at least 2005 (do the math that is 10 years).
I don't even have the Camera hooked up and I get this error on download. I redownloaded everything and reinstalled. I allso saw the AVI issues reported with this proble so i updated Quicktime though without the camera being hooked up when I get this error I didn't expect that to work. I tried support and they wouldn't help because I bought it in March this year. Pretty frustrating as I have re-purchased Elements about every 2 years. I think I might need a new CODEC? I had this problem on an Earlier version And I seem to remember that being the Fix but this may be something completely differentI finally found that it was missing a picture so the Catalog was "corrupted". I just deleted the picture and it started working.
I hate Adobe and their total lack of support - thanks for nothing Adobe . Also get this - they offered me to upgrade to 13.0 ( My 12.0 is only 6 months old but they still don't support it on errors. Only install errors!
I have upgrade and repurchase this product 4 times now. I will find something else next time! -
Creative Cloud is failing to install (error code 50) Does anyone know how to fix this? I'm on Windows 8.1. It was previously installed and requested update. The update failed with same code.
"Failed to install" | Creative Cloud Desktop : https://helpx.adobe.com/creative-cloud/kb/failed-install-creative-cloud-desktop.html
-
I have an external hard disk of 319.73 GB that I use as back up memory and where I put all the movies and other files that I can't leave on the computer as they occupy too much memory space . One day I was deleting all the previous dated back up to have more space on it , but had to stop the trash for doing it cause it was taking too long and now every time that I try to empty the trash it just says "The operation can’t be completed because an unexpected error occurred (error code -8003)" and even if I press CONTINUE it won't empting it . I'm not really pratical with this things and I tried already to find out the solution here and on Google but apparently nobody ever had a similar error code and I don't know what else to do.
I've a MacBook Pro with a Mac OS X 10.6.8 Version.
Thanks again for the help and sorry if I did some english mistakes !
PEACE & LOVEHey donnie90,
It seems like this article might be the best for helping you address this issue:
You can't empty the Trash or move a file to the Trash
http://support.apple.com/kb/ht1526
Thanks for coming to the Apple Support Communities!
Regards,
Braden -
I'm trying to delete files from an external disc and it doesn't let me couse this pops up:
The operation can’t be completed because an unexpected error occurred (error code -1407)
Please what does it mean? I also have a file in the trash of my mac book named something similar to: a'*.'*.'*'.*.
and this cannot be deleted either..
Please let me know what I can do.
I also have many files in the external disc that I need so I cannot do a format..
Thank you.
Best Regards
KarinHave you tried putting the file from your Drobo, onto your computer, then onto to the external hard drive?
-
Can I restore photo files from Time Machine without the use of an external drive? While I was transferring photos back and forth from a thumb drive something went haywire and my IPhoto was wiped clean! When I click on Time Machine I see all the dated pages (without an external storage drive connected), go back to a date where all my photo files are there, click "restore", and I get the message: "The Finder can't complete the operation because some data in file cant be read or written (error code - 36)"
Thanks so much Terence. I tried some of the fixes from that page, but then discovered the suggestion to compress the Time Machine Back up of the original library and transfer it as a zip back to my computer as detailed here:
http://pondini.org/TM/E9.html
That worked like a charm. I really appreciate it. -
Old visa open, error code 1073807343, using VISA with a GPIB device, and VISA resource names
Hi everyone,
I'm trying to get a SRS model SR720 LCR meter (manual on this page) working with LabView, connecting it to my PC with an Agilent 82357A GPIB/USB interface (manual on this page). I'm running MAX version 14.0, and NI-VISA version 14.0. I'm running LabView version 13.0f2, 32 bit.
I followed the directions on this page, and I'm pretty confident I can communicate with my LCR meter, because I can go to NI MAX->GPIB0::17::INSTR under "devices and interfaces", then go to the VISA test panel, go to the I/O tab, and I can enter a few commands from the SR720 manual, like changing the frequency, and I see the light on the LCR meter change to what I just told it to do. Here is a picture, just to illustrate it:
Also, if I do the *IDN? command, it returns "
9: Write Operation (*IDN?)
Return Count: 5 bytes
10: Read Operation
Return Count: 41 bytes
StanfordResearchSystems,SR720,08087,1.03\n
So, that's good too. I also made the alias of this device "MyLCRmeter", but that shouldn't matter for now.
Now I'm trying to get it to work in a more usable way. The SR7xx drivers that LabView found for me came with a couple sample programs, one called "Getting Started.vi". I tried to just simply see if it worked, changing the "instrument descriptor" field to "GPIB0::17::INSTR", since that's the one that seemed to be the right device in MAX. Here is a picture of the front panel of "Getting Started.vi":
Trying to run it like this gave me this error (code -1073807343):
Old VISA Open in SR715/720 Initialize.vi->SR715/720 Getting Started.vi
Doing a bit of searching on these forums, I found these few threads (1 2 3), which seem to tell me that, since this program was written, the way you open VISA has changed. In the 2nd of those links, one guy said:
You just have to replace the Old VISA Open function with the VISA Open that is on the Instrument I/O>VISA>VISA Advanced palette. When you do that, the wire to the string that was used for the resource name will be broken. Delete the string and make the actual VISA Resource Name visible on the front panel. Wire the VISA Resource Name control to the connector pane where the string control was (upper left connection).
So, I went into the sub-VI Initialize.vi, and did that. Here is a picture of what the front panel and block diagram of the sub-VI Initialize2.vi (I changed the name in case I screwed things up, but I'm pretty sure the new one is the one being called by Getting Started.vi) looked like before I changed anything (you can see the Old VISA Open):
and here it is after replacing that with the regular VISA Open, deleting the instrument descriptor string and replacing it with a VISA resource, and connecting that to the VISA Open:
However, as you can see in the image above, and it seems like someone else had this problem in the 2nd thread linked above, I don't see my device listed in the drop-down menu (even if I refresh), only "LPT1" (I don't even know what that is):
No, I wasnt able to select the visa resource from the pull down menu. somehow it seems disabled or something.
If I just enter the VISA resource name from MAX manually, GPIB0::17::INSTR, and save and try running that, I get the error(code -1073807346):
VISA Open in SR715/720 Initialize2.vi->SR715/720 Getting Started.vi
So I'm not sure where to go from there, or why it's not in the drop down menu to begin with. I'm sorry if I've missed something but I've searched about as far as I can go. If I had to guess, maybe one thing could be that in MAX, under Tools->NI-VISA->VISA Options->My System->Conflict manager, I have both Agilent VISA and NI VISA enabled; I know sometimes problems arise from conflicts between different software fighting over the same hardware. Is this okay, or do I need to change it?
Thank you and please let me know if there is any other code/screenshots I could provide that could help!Hi, I did indeed enable NiVisaTulip.dll under MAX->Tools->NI-VISA->VISA Options->My system->Passports->List of passports. Sorry, I should have mentioned that explicitly.
By install as primary, do you just mean as it is here, where it is selected as the "Preferred VISA"?
Or somewhere else? I installed NI-VISA first I believe, and then the Agilent one, and during the installation of the Agilent one, I'm pretty sure I made it not the primary. Here's what I have in the Agilent (it's called Keysight now) Connection Expert software:
I also have this under the "Keysight 488 options" tab:
Should that be checked? I don't actually know the role of VISA vs 488 here...
What could I try?
Thank you! -
DirectAccess Client not connecting without error code on Windows Server 2012 R2 and Windows 8.1
Hello,
we are currently migrating from Windows Server 2012 to 2012 R2 and are not able to get the new Direct Access Service up and running. Our goal is to establish DirectAccess connection for a handful of clients using the IPHTTPS-adapter on the default port 443.
Errors:
There is actually no error showing up. It seems the infrastructure tunnel cannot be created but none of the IPv6-transition adapters is connecting (teredo and 6-to-4 are down) and the IPHTTPs adapter gives no informations about a problem:
>Get-DAConnectionStatus
Status : Error
Substatus : CouldNotContactDirectAccessServer
>Get-NetIPHttpsState
LastErrorCode : 0x0
InterfaceStatus : Failed to connect to the IPHTTPS server; waiting to reconnect
Setup:
Our setup is a virtualized Windows Server 2012 R2 Standard running on Hyper-V. It is located behind a NAT having the Port 443 mapped to the server. The only role installed after the basic install is RRAS including DirectAccess and VPN. The assistants completed
successfully (running the configuration for DirectAccess and VPN). Operation Status says everything is green und working (for multiple days in the meanwhile). A previous direct access installation (on a different machine running Windows Server 2012) has
been removed before installing the new server. The new installation is using a different router, so this might also be the cause of a problem.
The client is a Windows 8.1 notebook located outside the company network accessing the internet through another NAT-device. The client has been able to connect to the previous DirectAccess setup but has never been able to establish a connection after the
setup of the new Direct Access server. The device has no outbound constraints concerning the NAT-device and is only running the integrated Windows Firewall.
Diagnosis:
So far I've done some basic DNS and connectivity checks. The DNS-name can be resolved correctly and the router even responds to pings. The port forward is working and HTTPs connections are generally possible (temporarily routed the port to
access the NLS-Website located on the server, which worked fine).
Network monitor shows that both computers are communicating, traffic on the expected Port 443 is incoming on the server and responses from the server reach the client.
Opening the IPHTTPs-url and in an endless page load. Sometime the browser page closes but I've never seen any result. Using telnet on the port shows that the server is accepting connections. I've even build a small test application that does a GET-Request
on the URL returning HTTP-200 and no content.
I'm currently running out of ideas what to do and since no error occurs this is kind of a bit frustrating. Any help appreciated.
Regards
MatthiasHi,
In addition, have you disabled the DA client components on the DA client? If no, please also check
the settings on the Name Resolution Policy Table.
More information:
DirectAccess
Client Location Awareness – NRPT Name Resolution
In addition, error 0x4C9 means the remote computer refused the network connection. It may be due to the invalid
registry or corrupt drivers. For more detailed information, please refer to the link below:
Error 1225 - Error Code 0x4C9
Note:
Microsoft is providing this information as a convenience to you. Please make sure that you completely understand the risk before retrieving any suggestions from the above link.
Best regards,
Susie -
i just baught my first iphone and it is a jalbroken and factory unlocked version of an iphone 4 running ios 6.0.1. I dont like the fact that this phone might potentially be illegal with the "jailbreak" so ive been trying to restore it back to the factory unlocked settings, but every time i do i get error codes. when it the phone is running normally i get an error code 21 and when i try to run it in recovery or DFU mode i get either a 1601, 1602 or 1604 error code. please help!
Microsoft Windows 7 x64 Home Premium Edition Service Pack 1 (Build 7601)
Gateway NV78
iTunes 11.0.1.12
QuickTime not available
FairPlay 2.2.32
Apple Application Support 2.3.2
iPod Updater Library 10.0d2
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 6.0.1.3
Apple Mobile Device Driver 1.63.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 001ABCD80B980CB0
Current user is not an administrator.
The current local date and time is 2013-01-03 12:06:39.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
Intel Corporation, Mobile Intel(R) 4 Series Express Chipset Family
Intel Corporation, Mobile Intel(R) 4 Series Express Chipset Family
**** External Plug-ins Information ****
No external plug-ins installed.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name: {3684E32D-4846-436A-B1F8-95238FCB0EFA}
Description: Broadcom NetLink (TM) Gigabit Ethernet
IP Address: 192.168.1.37
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.1
DHCP Enabled: Yes
DHCP Server: 192.168.1.1
Lease Obtained: Thu Jan 03 11:10:09 2013
Lease Expires: Fri Jan 04 11:10:09 2013
DNS Servers: 192.168.1.1
Adapter Name: {00BC4D36-12D6-4016-8BC0-DB5C01069066}
Description: Intel(R) WiFi Link 5100 AGN
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway: 0.0.0.0
DHCP Enabled: Yes
DHCP Server:
Lease Obtained: Wed Dec 31 16:00:00 1969
Lease Expires: Wed Dec 31 16:00:00 1969
DNS Servers:
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
Firewall Information
Windows Firewall is on.
iTunes is NOT enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was successful.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2013-01-03 11:50:45.
**** Device Connectivity Tests ****
iPodService 11.0.1.12 (x64) is currently running.
iTunesHelper is currently not running.
Apple Mobile Device service 3.3.0.0 is currently running.
Universal Serial Bus Controllers:
Intel(R) ICH9 Family USB Universal Host Controller - 2934. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2935. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2936. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2937. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2938. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2939. Device is working properly.
Intel(R) ICH9 Family USB2 Enhanced Host Controller - 293A. Device is working properly.
Intel(R) ICH9 Family USB2 Enhanced Host Controller - 293C. Device is working properly.
No FireWire (IEEE 1394) Host Controller found.
Connected Device Information:
Sox’s iPhone, iPhone 4 (GSM) running firmware version 6.0.1
Serial Number: 8003494TA4T
**** Device Sync Tests ****
Sync tests completed successfully.SadisticIron wrote:
i just baught my first iphone and it is a jalbroken
Buzz! Thank you for playing!
Discussing jailbroken devices is forbidden here by the Terms of Service.
You can not get help here. -
Windows Update Error Code 80072F8F! I Did All The Steps And Will Not Fix Please HELP?
No one seems they can not help me fix this error code I did many things and not one person has really
helped me, I have a question at another forum but all they do is just ask me questions tell me steps to fix this but nothing worked at all, This happened on 8/30/2014 and ever since no one can help me fix this at all....I have no money to pay for the fix...I
am on very very low limited disability income, No credit cards nothing. I need help now I paid a lot of money for my Windows 7 Ultimate and now since 8/30/2014 I got that error code no one has helped me....PLEASE help me please....And I am not sure where to
go for help here thank you. I have done many things but nothing is fixing this issue. please help...And yes I did the clock and clock keeps perfect time, doing that clock did not fix this error code at all...Hi Angelsims,
First I also want to get more information from you to help us to troubleshhot:
1.Did this error occur on a single update or multiple updates? please also post the update name in issue.
2.Please also post the steps you have followed to fix this issue.
In addition, please try to use the general steps to troubleshoot the windows update issue, and refer to the steps below:
The following outlines how to stop services pertaining to Windows Update, rename system folders, register related DLL files, and then restart the previously mentioned services. This troubleshooting generally applies to all Windows Update related issues.
Stopping services pertaining to Windows Update
1. Click Start, click All Programs, click Accessories, right-click Command Prompt, and select Run as Administrator.
2. If you receive a notification from User Account Control simply click Continue.
3. At the command prompt, type the following, commands and then press ENTER after each command.
net stop wuauserv
net stop bits
net stop cryptsvc
Please do not close the Command Prompt window.
Renaming folders pertaining to Windows Update
1. At the command prompt, type the following commands, and then press Enter after each command:
2. ren %systemroot%\System32\Catroot2 Catroot2.old
3. ren %systemroot%\SoftwareDistribution SoftwareDistribution.old
4. Please do not close the Command Prompt window.
Registering DLL’s pertaining to Windows Update
1. Please copy and paste the following text into a new Notepad document, and save the file as WindowsUpdate.BAT
2. If saved correctly the icon will change from a Notepad file to BAT file which has two blue cogs as its icon.
-or-
3. You can manually type each command at the command prompt:
regsvr32 c:\windows\system32\vbscript.dll /s
regsvr32 c:\windows\system32\mshtml.dll /s
regsvr32 c:\windows\system32\msjava.dll /s
regsvr32 c:\windows\system32\jscript.dll /s
regsvr32 c:\windows\system32\msxml.dll /s
regsvr32 c:\windows\system32\actxprxy.dll /s
regsvr32 c:\windows\system32\shdocvw.dll /s
regsvr32 wuapi.dll /s
regsvr32 wuaueng1.dll /s
regsvr32 wuaueng.dll /s
regsvr32 wucltui.dll /s
regsvr32 wups2.dll /s
regsvr32 wups.dll /s
regsvr32 wuweb.dll /s
regsvr32 Softpub.dll /s
regsvr32 Mssip32.dll /s
regsvr32 Initpki.dll /s
regsvr32 softpub.dll /s
regsvr32 wintrust.dll /s
regsvr32 initpki.dll /s
regsvr32 dssenh.dll /s
regsvr32 rsaenh.dll /s
regsvr32 gpkcsp.dll /s
regsvr32 sccbase.dll /s
regsvr32 slbcsp.dll /s
regsvr32 cryptdlg.dll /s
regsvr32 Urlmon.dll /s
regsvr32 Shdocvw.dll /s
regsvr32 Msjava.dll /s
regsvr32 Actxprxy.dll /s
regsvr32 Oleaut32.dll /s
regsvr32 Mshtml.dll /s
regsvr32 msxml.dll /s
regsvr32 msxml2.dll /s
regsvr32 msxml3.dll /s
regsvr32 Browseui.dll /s
regsvr32 shell32.dll /s
regsvr32 wuapi.dll /s
regsvr32 wuaueng.dll /s
regsvr32 wuaueng1.dll /s
regsvr32 wucltui.dll /s
regsvr32 wups.dll /s
regsvr32 wuweb.dll /s
regsvr32 jscript.dll /s
regsvr32 atl.dll /s
regsvr32 Mssip32.dll /s
Restarting services pertaining to Windows Update
1. Click Start, click All Programs, click Accessories, right-click Command Prompt, and select Run as Administrator.
2. If you receive a notification from User Account Control simply click Continue.
3. At the command prompt, type the following, commands and then
press ENTER after each command.
net start wuauserv
net start bits
net start cryptsvc
exit
Please try the steps above, if the step failed, please post the error or failure information.
If there is anything else regarding this issue, please feel free to post back.
Best Regards,
Anna Wang -
Hi i am trying to install itunes and it wont install due to error code 2349 how do i fix this issue
i have tryed on numerous occasions to install itunes and it sometimes installs but then i cant use it due to error code 2349, so i uninstall and try again and wont install it at all due to error code 2349 please help i really eant to use my ipod
Refer to this thread:
https://discussions.apple.com/thread/3174150?start=0&tstart=0
Maybe you are looking for
-
Cannot Install Multimedia Apps onto MacBook Pro from CS4 Master Collection
I am trying to install the Master Collection to my MacBook Pro. It has an Intel Core 2 Duo processor 2.2GHz 2GB RAM Mac OS 10.5.6 20GB hard drive space free I am installing from a Master Collection license. The serial number is accepted, but when I g
-
Multi forms from different action in one jsp using struts?
In user home page i am using 3 tabs in that 1 tab is for personal , 2 tab is for resume details etc.. but i crated for personal form1 and resumes for form2. when i click in the resume tab i have to show resumes list using same jsp. when click that ta
-
Transfering PC iTunes Library To New iMac
Hi Everyone I am very very new to macs and have been a pc user for the last 10 years. I have recently bought the new iMac and was wondering how to transfer all my music from the PC to it?? I sort of have an idea how to do it but I do not want to lose
-
BEA-149218 Attempted to report an exception to DRS and received an error
I am using Weblogic81 SP2. I have two Managed servers. I am trying to start a managed server through Node Manager and I get the following error ####<Nov 20, 2003 10:09:14 AM EST> <Error> <Deployer> <iolaus> <iolaus110> <ExecuteThread: '4' for queue:
-
Elements 12 organizer freezes, won't open
Organizer gives the message "not eligible to use due to service eligibilty requirements"