Ok so I cant open my Itunes due to Windows Error 2 and the message says to uninstall and re-install Itunes but I'm pretty sure that would wipe the library right? Is there any way to fix the problem and keep my library?

Ok so I cant open my Itunes due to Windows Error 2 and the message says to uninstall and re-install Itunes but I'm pretty sure that would wipe the library right? Is there any way to fix the problem and keep my library?

Hi neffn!
I have an article for you that can help you go through that process of uninstalling and reinstalling iTunes. If you have Windows 7, you will want to see this article:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.apple.com/kb/ht1923
and if you are using Windows XP, you will want to reference this article:
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
http://support.apple.com/kb/ht1925
Note that, as it says in those articles:
iTunes Store purchases or songs imported from CDs are saved in your My Music folder by default and are not deleted by removing iTunes. While it is highly unlikely that you will lose any contents of your iTunes Library when following these steps, it is always a good idea to ensure that your iTunes library is backed up. If you're unsure how to backup, see iTunes: Back up your iTunes library by copying to an external hard drive.
Thanks for using the Apple Support Communities. Have a good one!
-Braden

Similar Messages

  • I have problem with my ipad when set up ipad asked to activation but i cant remember my apple id that i used to setup.now i can not open it .Is there any way to fix this problem?

    I have problem with my ipad when set up ipad asked to activation but i cant remember my apple id that i used to setup.now i can not open it .Is there any way to fix this problem?

    Hello Abdo_Zain,
    I would be concerned too if I was not able to gain access to my iPad.  If you are unsure what your Apple ID is, you can find the steps in this article:
    Apple ID: How to find your Apple ID
    http://support.apple.com/kb/HT5625
    You can reset a forgotten Apple ID password by going to the following link:
    Apple - iForgot
    https://iforgot.apple.com
    Also, you may be able to skip the step of entering your Apple ID if you are setting up the iPad for the first time.
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • I am new to this but need help. Lion and iCloud have never worked on my desk top or MacBook Pro.  Slow or Stop!  Is there any way to fix the problem?

    I am new to this but need help. Lion and iCloud have never worked on my desk top or MacBook Pro.  Slow or Stop!  Is there any way to fix the problem?

    We need more information. I'm not sure what you mean by both Lion and iCloud have never worked.

  • I have the kin 2 and whenever I turn it on, it does the introduction (pictures, ect.) and the pictures go on for about 3 minuets. but then when it is done, the screan turns blank. is there any way to fix this problem?

    I have the kin 2 and whenever I turn it on, it does the introduction (pictures, ect.) and the pictures go on for about 3 minuets. but then when it is done, the screan turns blank. is there any way to fix this problem?

    I have the EXACT same problem. I just got done talking with Verizon, and a replacement is on the way.

  • HT201210 i tried installing ios 6 on my new ipad but when i try to change it to ios 6 it say that it cant be restored because the firmware file is not compatible. Is there any way to fix this problem

    i tried installing ios 6 on my new ipad but when i try to change it to ios 6 it says that the firmware file is not compatile. Is there any way to fix this problem?

    Sorry to be the bearer of bad news.
    Only developers have legal access to iOS 6 right now, if you really, really wanted it you could sign on as a developer for $99.
    http://developer.apple.com

  • I smashed my ipod, is there any way to fix the touchscreen as it is now stuffed

    i smashed my ipod, is there any way to fix the touchscreen as it is now stuffed

    Apple will exchange your iPod for a refurbished one for this price:
    Apple - Support - iPod - Repair pricing
    A third-party place like the following maybe less. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

  • Since installing Yosemite, my MacBook Pro has become slower.  Is there any way to fix this problem?

    Ever since I installed OS X Yosemite on my mid 2012 MacBook Pro, it has started becoming slower and slower and glitching out.  Is there any way to fix this?  Here is my diagnostics:
    Problem description:
    My Mac is rather slow.  It started happening after I installed OS X Yosemite
    EtreCheck version: 2.0.11 (98)
    Report generated November 10, 2014 at 7:32:23 PM EST
    Hardware Information: ℹ️
      MacBook Pro (13-inch, Mid 2012) (Verified)
      MacBook Pro - model: MacBookPro9,2
      1 2.5 GHz Intel Core i5 CPU: 2-core
      4 GB RAM Upgradeable
      BANK 0/DIMM0
      2 GB DDR3 1600 MHz ok
      BANK 1/DIMM0
      2 GB DDR3 1600 MHz ok
      Bluetooth: Good - Handoff/Airdrop2 supported
      Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
      Intel HD Graphics 4000 -
      Color LCD 1280 x 800
    System Software: ℹ️
      OS X 10.10 (14A389) - Uptime: 0:36:19
    Disk Information: ℹ️
      APPLE HDD HTS545050A7E362 disk0 : (500.11 GB)
      S.M.A.R.T. Status: Verified
      EFI (disk0s1) <not mounted> : 210 MB
      Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
      Macintosh HD (disk1) /  [Startup]: 496.14 GB (325.60 GB free)
      Encrypted AES-XTS Unlocked
      Core Storage: disk0s2 499.25 GB Online
      MATSHITADVD-R   UJ-8A8 
    USB Information: ℹ️
      Apple Inc. FaceTime HD Camera (Built-in)
      Apple Inc. BRCM20702 Hub
      Apple Inc. Bluetooth USB Host Controller
      Apple Inc. Apple Internal Keyboard / Trackpad
      Apple Computer, Inc. IR Receiver
    Thunderbolt Information: ℹ️
      Apple Inc. thunderbolt_bus
    Gatekeeper: ℹ️
      Mac App Store and identified developers
    Kernel Extensions: ℹ️
      /Library/Application Support/Avast/components/fileshield/unsigned
      [loaded] com.avast.AvastFileShield (2.1.0 - SDK 10.9) Support
      /Library/Application Support/Avast/components/proxy/unsigned
      [loaded] com.avast.PacketForwarder (1.4 - SDK 10.9) Support
      /Library/Extensions
      [loaded] com.logmein.hamachi (1.0.0 - SDK 10.9) Support
      /System/Library/Extensions
      [not loaded] com.paceap.kext.pacesupport.master (5.9.1 - SDK 10.6) Support
      /System/Library/Extensions/PACESupportFamily.kext/Contents/PlugIns
      [not loaded] com.paceap.kext.pacesupport.leopard (5.9.1 - SDK 10.4) Support
      [not loaded] com.paceap.kext.pacesupport.panther (5.9.1 - SDK 10.-1) Support
      [loaded] com.paceap.kext.pacesupport.snowleopard (5.9.1 - SDK 10.6) Support
      [not loaded] com.paceap.kext.pacesupport.tiger (5.9.1 - SDK 10.4) Support
    Launch Agents: ℹ️
      [not loaded] com.adobe.AAM.Updater-1.0.plist Support
      [not loaded] com.adobe.AdobeCreativeCloud.plist Support
      [not loaded] com.avast.userinit.plist Support
      [running] com.logmein.hamachimb.plist Support
      [loaded] com.oracle.java.Java-Updater.plist Support
    Launch Daemons: ℹ️
      [loaded] com.adobe.fpsaud.plist Support
      [loaded] com.avast.init.plist Support
      [loaded] com.avast.uninstall.plist Support
      [loaded] com.avast.update.plist Support
      [running] com.logmein.hamachi.plist Support
      [loaded] com.macpaw.CleanMyMac2.Agent.plist Support
      [loaded] com.microsoft.office.licensing.helper.plist Support
      [loaded] com.oracle.java.Helper-Tool.plist Support
      [running] com.paceap.eden.licensed.plist Support
      [not loaded] org.eyebeam.SelfControl.plist Support
      [loaded] PACESupport.plist Support
    User Launch Agents: ℹ️
      [loaded] com.adobe.AAM.Updater-1.0.plist Support
      [not loaded] com.adobe.ARM.[...].plist Support
      [invalid?] com.avast.home.userinit.plist Support
      [not loaded] com.google.keystone.agent.plist Support
      [loaded] com.macpaw.CleanMyMac2Helper.scheduledScan.plist Support
      [loaded] com.macpaw.CleanMyMac2Helper.trashWatcher.plist Support
      [running] com.spotify.webhelper.plist Support
      [not loaded] com.valvesoftware.steamclean.plist Support
    User Login Items: ℹ️
      iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
      uTorrent UNKNOWN (missing value)
      AdobeResourceSynchronizer ApplicationHidden (/Applications/Adobe Reader.app/Contents/Support/AdobeResourceSynchronizer.app)
    Internet Plug-ins: ℹ️
      AdobeAAMDetect: Version: AdobeAAMDetect 2.0.0.0 - SDK 10.7 Support
      FlashPlayer-10.6: Version: 15.0.0.189 - SDK 10.6 Support
      Default Browser: Version: 600 - SDK 10.10
      AdobePDFViewerNPAPI: Version: 11.0.09 - SDK 10.6 Support
      AdobePDFViewer: Version: 11.0.09 - SDK 10.6 Support
      Flash Player: Version: 15.0.0.189 - SDK 10.6 Support
      QuickTime Plugin: Version: 7.7.3
      SharePointBrowserPlugin: Version: 14.4.5 - SDK 10.6 Support
      Silverlight: Version: 5.1.20913.0 - SDK 10.6 Support
      DirectorShockwave: Version: 12.0.6r147 - SDK 10.6 Support
      JavaAppletPlugin: Version: Java 8 Update 20 Check version
    User Internet Plug-ins: ℹ️
      Unity Web Player: Version: UnityPlayer version 2.6.1f3 Support
      NPRoblox: Version: 1, 2, 8, 25 - SDK 10.9 Support
    Safari Extensions: ℹ️
      Adblock Plus
      Searchme
    3rd Party Preference Panes: ℹ️
      Flash Player  Support
      Java  Support
    Time Machine: ℹ️
      Time Machine not configured!
    Top Processes by CPU: ℹ️
          8% mds
          4% WindowServer
          0% fontd
          0% launchd
          0% com.avast.daemon
    Top Processes by Memory: ℹ️
      163 MB Safari
      120 MB mds_stores
      112 MB com.avast.daemon
      86 MB Finder
      64 MB com.apple.WebKit.WebContent
    Virtual Memory Information: ℹ️
      398 MB Free RAM
      1.75 GB Active RAM
      1.19 GB Inactive RAM
      753 MB Wired RAM
      4.25 GB Page-ins
      1 MB Page-outs

    1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
    Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
    2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
    There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
    You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
    In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
    You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
    Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
    4. Here's a summary of what you need to do, if you choose to proceed:
    ☞ Copy a line of text in this window to the Clipboard.
    ☞ Paste into the window of another application.
    ☞ Wait for the test to run. It usually takes a few minutes.
    ☞ Paste the results, which will have been copied automatically, back into a reply on this page.
    The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
    5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
    6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
    7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
    Triple-click anywhere in the line of text below on this page to select it:
    PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB ' com.adobe.AAM.Updater-1.0 com.adobe.CS4ServiceManager com.adobe.CS5ServiceManager com.adobe.fpsaud com.adobe.SwitchBoard com.apple.AirPortBaseStationAgent com.apple.FolderActions.enabled com.apple.FolderActions.folders com.apple.installer.osmessagetracing com.apple.mrt.uiagent com.apple.ReportCrash.Self com.apple.SafariNotificationAgent com.apple.usbmuxd com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.JavaUpdateHelper ' ' 879294308 3627668074 1083382502 1274181950 1855907737 464843899 3694147963 1417519526 1233118628 2456546649 2806998573 2636415542 842973933 3301885676 891055588 998894468 695903914 1443423563 ' 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._][email protected][0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<10) print "com.apple.";} ' ' sub(/ :/,"");{ print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\)\\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n   "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n   [N/A]";"cksum "F|getline C;split(C, A);C="checksum "A[1];"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F" ("T", "C")";else F=F" ("C")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n   ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */   /;' ' s/^.+ |\(.+\)$//g;p ' '/\.appex\/Contents\/Info\.plist$/p' ' /2/{print "WARN"};/4/{print "CRITICAL"};' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test osascript\ -e sysctl\ -n pluginkit );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$(RefProc): \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|Roame|SMC:|suhel| VALI|ver-r|xpma' -o -o -k Sender fseventsd -k Message Req SL -o -k Sender Req launchd -k Message Req de: " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????|wc -l' kern.memorystatus_vm_pressure_level );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors App\ extensions Lockfiles Memory\ pressure );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 38 52 66 54;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 39 50 64;B7 16;C3 52;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D12 4 51 32 53;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    8. Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
    9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
    exec bash
    and press return. Then paste the script again.
    10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return  three times at the password prompt. Again, the script will still run.
    If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
    11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
    [Process completed]
    to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
    12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
    At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
    If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
    13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
    14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
    Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

  • Is there any way to fix the window screen grab in 10.5?

    For whatever reason, the window capture function (CMD-SHIFT-4, then SPACE) in OS X 10.5 now insists on including the shadow of the window being captured. Given how much documentation I write this is a HUGE setback for me; what used to take a few seconds now takes several minutes since I now have to edit every image in Photoshop to remove the shadow, or use CMD-SHIFT-4 without the SPACE and hope my marquee is accurate.
    Is there any way to fix this "improvement" (ahem) in 10.5?
    <Edited by Moderator>

    Here is the problem.
    Let's say you have a window that's sized to, say, 400x300, and you want to grab that window. You hit SHIFT-CMD-4, then tap SPACE, then click on the window.
    Up until OS X 10.5, you would get an image file on your desktop that, when opened, contained a 400x300 graphic of that window.
    Starting with 10.5, when you open that image you get an image that's LARGER than 400x300 and contains the window plus the shadow that OS X puts around it, with transparency.
    Yes, they look great when you post them in documents with any color background. But that's only useful if you have an actual design-need for a drop shadow. Believe it or not, there are countless instances where a drop shadow is NOT needed or wanted. This means that I have to edit every file to remove the drop shadow which is a waste of time. Before Apple forced the drop shadow, I had the choice of whether to include a drop shadow or not when I work with the file in InDesign, and the drop shadow would work beautifully in any color background.

  • I duplicated all the pictures in my library. Is there any way to delete the duplicates at one time without going and deleting them one by one

    I duplicated all my pictures. Is there any way to delete the duplicates without deleting them one at a time. I now have 44,000 pictures and have 22,000 duplicates

    Easiest solution: restore from your back up.
    Other than that: For dealing with duplicates in iPhoto check out Duplicate Annihilator or Decloner

  • Is there any way to fix the flash and poor photo quality after iOS 7 upgrade?

    Hi everybody,
       Since upgrading to the new iOS 7 on my iPhone 5 ... I have experienced poor photo (grainy) and the flash works when it feels like it... Is there any way
    possible to revert back at least on the camera settings or is there a fix that can be downloaded to solve this problem? I take and use my camera a lot on my iphone5 and for me to have this problem it has made me really regret ever upgrading and I  am starting to lose my faith in Apple products. I have searched the entire web and it appears there are a ton of people experiencing this same problem.!!!!

    Try This...
    Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
    Reset  ( No Data will be Lost )
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
    Wait for the Apple logo to Appear...
    Usually takes about 15 - 20 Seconds... ( But can take Longer...)
    Release the Buttons..
    If no joy... Try a Restore...
    1: Connect the device to Your computer and open iTunes.
    2: If the device appears in iTunes, select and click Restore on the Summary pane.
    Restoring  >  http://support.apple.com/kb/HT1414
    Make sure you have the Latest Version of iTunes (v11.1.5) Installed on your computer
    iTunes free download from www.itunes.com/download

  • Is there any way to fix the home button on ipod touch?

    my home button has today stopped working!  is there any way that this can be fixed, either by a repair shop or by me doing some thing?  at the moment the only way to get out of an app is to turn off the ipod and then tuirn it back on again - which is getting really tiresome and annoying!!
    About 2 mnths ago the ipod was submerged in liquid but oonly for seconds, it has since worked fine (thank god) with no troubles, but like i said, today for some reason the home buttn is no longer doing its job!! please help lol !!

    Try this previous discussion:
    FIX for iPod Touch Home Button: Apple Support Communities

  • Is there any way to fix the Notes from disappearing?

    this is not the first time this has happened to me....i'll make some notes out and then i go to look at them and they're gone!...WTH is going on here...? Anyway to fix the problem if it's on my end? Maybe i'm doing something wrong? But i see there is a lot of problems with it so maybe it's some glitch with Apple? Anyway any help is appreciated!

    Here is the problem.
    Let's say you have a window that's sized to, say, 400x300, and you want to grab that window. You hit SHIFT-CMD-4, then tap SPACE, then click on the window.
    Up until OS X 10.5, you would get an image file on your desktop that, when opened, contained a 400x300 graphic of that window.
    Starting with 10.5, when you open that image you get an image that's LARGER than 400x300 and contains the window plus the shadow that OS X puts around it, with transparency.
    Yes, they look great when you post them in documents with any color background. But that's only useful if you have an actual design-need for a drop shadow. Believe it or not, there are countless instances where a drop shadow is NOT needed or wanted. This means that I have to edit every file to remove the drop shadow which is a waste of time. Before Apple forced the drop shadow, I had the choice of whether to include a drop shadow or not when I work with the file in InDesign, and the drop shadow would work beautifully in any color background.

  • I bought a few songs the other day, and only half of most of the songs downloaded. Like as in all of the songs downloaded but only go to about 1:30 then stop playing. Is there any way to fix this?

    It was around like 16ish 3-4 minute long songs that only played up to 1 minute 30 seconds. If this can't be fixed, is there a way i could at least get a refund?

    Amazing steps you've done so far! The great news is this is very unlikely an issue with your iPhone.
    I've run into a similar issue lately as well. I narrowed it down to one song that was causing 30 songs not to sync. I removed the song from the sync list (unchecked it) and all 29 songs were able to sync.
    You may be running into a similar issue. This may be a problem with this version of iTunes, an issue with one song or a group of songs; hard to know for sure. It's important to narrow down and isolate the cause. Most imporantly get that music back on there!
    The way to narrow down the casue add just a few songs at a time (even 1, just to get that first sync finished). Manually syncing is what you'll need here.
    Plug in your iPhone, on the Summary screen (shows a picture of your iPhone, the iOS version, Restore iPhone....; etc). Under the Options area at the bottom choose to Manually Manage Videos and Music then choose Apply in the lower right. The music that's on your iPhone now should be removed from your iPhone now. You're now able to sync music manually.
    The link below explains how to drag the songs from the iTunes library on the computer on to your iPhone which will start the sync. Add just one song just to see if you can get 1 of those hundreds of songs on there. If you can, awesome! Keep adding until you find the song or group of songs that are causing this issue.
    http://support.apple.com/kb/HT1535
    Please let me know how things are going.
    Cheers!

  • Is there any way to fix the slow code completion in Netbeans 5.5+

    Netbeans 5.5 or Netbeans 5.5.1
    Is there any possible fix for the slow code completion within the editor? I've googled this issue and haven't found much of anything relevant.
    While, not used all the time - a faster than what it is now code completion would be helpful.
    Thanks,
    --Todd                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

    helloWorld
    Thanks for the response and useful response.
    :P
    I'm not a decent machine now and I guess I'll just keep on typing.
    --Todd                                                                                                                                                                                                                                                                                       

  • I do not have Aperture installed on my computer anymore but I do have my old library.  Is there any way to extract the ORIGINAL image from the library without having Aperture installed?

    I started using Aperture back when it first came out.  I really had no idea what I was doing when I set everything up.  I got a new computer but do not have my Aperture disc anymore but I do have my old library.  I can get into the library and find the pictures in the Preview and Thumbnails folders, but these obviously are not the original pictures.  The ones in the Preview folder are only 10% of the size of the original digial photo.  I want to know if there is any way to get or reconstruct the original picture using the files in the library without installing Aperture.

    Hi Refringgers,
    Install the 30 day trial of Aperture. Open your Aperture Library, export the Masters and Versions.
    Other than that I will make a strong recommendation not to muck within the Aperture library. Yes, you can find your photos in there, but if you ever decide to again use it may well be unable to be opened. The other thing is the photos are scattered around in a gazillion folders it would take a long time, of course depending on the number of photos, to retrieve them.
    Cordially,
    RicD

Maybe you are looking for

  • Java code on a customizable jsp

    Greetings does anybody know how should i place this code on a template for customizable pages?? <%! String ip=CacheParametrosAplicacion.obtenerInstancia().obtenerDatoParametro("IP_CONTENT_CSS"); String puerto=CacheParametrosAplicacion.obtenerInstanci

  • Media Manager and Subclips

    Hello, Seem to be having a slight issue with media manager. I broke a master clip up into 5 subclips. I tried to use media manager to create 5 new media files from these subclips (which should result in the subclips becoming their own master clips),

  • Dynamic Query in SVG Chart

    Hi, I have SVG Chart, Chart Type: Cluster Bar, Vertical. I have 4 Chart Series. First: SELECT null link, X.MESIC FROM [email protected] WHERE .......... I have given dynamic Chart Series Query: 'SELECT null link, X.MESIC FROM '||adm||'.[email protect

  • JComboBox setSlectedItem

    I have JComboBox.setSelectedItem("foo"); Using this information , I want to get the index of this selected Item. How do I get index? ex If "foo" is at index 2: JComboBox.getSelectedIndex should return 2. thnx

  • Total actual cost for a given PM Order

    hello all, how do i get total actual cost for a given PM order (in IW33 under cost tab we have total actual cost).. is stored in table or do i need to use any function module..... thanks in advance....