Okay need some help badly

Okay i have been having problems all day today. first mobile me now everything apple. For some reason i can't get safari to connect to the internet, firefox works fine, itunes store will not come up, mail doesn't connect, and when i go to mobile me in settings i get invalid user name or password. i know they are right cause i logged in through my pc and control panel fine. i made another account on my computer and same thing happens. what can i do? apple tv won't stream either cause i guess i can't get to the itunes store

Okay i figured it out. for some reason my network named was changed to something called house. still connected to my wireless and everything else worked except my apple apps. everything looked exactly the same just didn't notice the name until now. i checked al proxies and everything. so i deleted the name and made a new automatic location. thanks for the replies, drove me nuts all day. no idea how it got changed. i never go in there.

Similar Messages

  • 7500 Prism - Totally Dead. Need some help badly...

    Heya! I've had my 7500 Prism for a very long time and the only bad thing about it was that it sometimes used to freeze when playing a video. However, this bug got annoying enough to make me made the snap decision to update my firmware version. So far, so good, but there were no newer versions for my Product Code, so I changed it and updated. Unfortunately, I lost my native language menu in the process (should have known better), and I decided to downgrade. At this point, something during the downgrade went wrong and now my phone is totally dead. It won't boot and it won't even charge. Something like "Charger not supported" comes up and I am using the original charger. When it had enough battery, it went as far as showing the Nokia logo and than turned off on itself. I have tried to fix it by restoring the original version, but the computer can't pick it up fast enough before it goes off again and so all the programs I've tried can't detect the phone. Since I am laical in this area, I've figured someone from the forums with much more knowledge than myself could help me out So, I am open to suggestions. Thanks in advance!

    Well I'd lie if I say that I didnt see that comming Okay, thanks, I'll check these unofficial forums you mentioned. I had no idea that something could go so wrong (softwarewise) to render my Prism useless...

  • Need Decompiling Help BADLY

    Folks, I'm in a world-class bind and need some help badly. I just lost two month of work! It was all written in java 1.6.
    The only thing I have left is the jar file.
    I've tried a number of decompilers. The one that does the best job is jad. However, considering the sheer volume of code (and the mistakes made by jad), the results are pretty discouraging.
    When I decompile, jad throws this error:
    The class file version is 50.0 (only 45.3, 46.0 and 47.0 are supported)
    I've googled like crazy looking for a decompiler that will handle version 50 class files, but I'm not coming up with anything. Of course, I'd rather have something for free, but I'm willing to fork out some cash on this one if necessary because I really do not have time to re-reconstruct jad's work.
    Have you guys had any success decompiling version 50 class files?

    Probably too late, but how did you delete the code, and what platform are you using? I'd be looking into recovering the lost data before I flailed around trying to decompile Java bytecode.
    That said, if you've been using the machine in question since the accident, there's not much hope. All I can do is point you to Subversion and wish you better luck next time.
    At least with Java you only have to decompile/rewrite the classes that you hadn't finished; the others will be perfectly usable as .class files.
    (Edit:) Incidentally, there's a JAD plugin for Eclipse that might be useful to you when trying to recreate or integrate with these classes.

  • Need some help with a Macally enclosure and a spare internal drive

    Need some help with a Macally enclousure
    Posted: Oct 1, 2010 10:55 AM
    Reply Email
    Aloha:
    I have a Macally PHR-S100SUA enclousure that does not recognise,my WD 1001fals hard drive. It has worked just fine with other internal drives, but not this one?
    This is a spare internal drive that I am trying to make an external drive to store back ups for a lot of data. But so far I can not get it recognized by the computer. Maybe I need different drivers?
    Any suggestions?
    Dan Page

    Hi-
    Drivers aren't typically needed for external enclosures.
    Macally has none listed for that enclosure.
    The same is true for the WD drive, internal or external; no drivers.
    With the exception of high end PM multi drive enclosures, I can't think of any that use drivers.
    How is the external connected?
    Have you tried different cables, different ports?
    Bad/damaged cables are fairly common.
    Have you verified connections inside of the enclosure?

  • I need some help. im getting error -69 when trying to sync my ipod. i dont kno what to do. ive tried googling as much info as i can on this but i cant seem to find a answer to get me off to a good starting point. i back all my music up on a hard drive.

    i need some help. im getting error -69 when trying to sync my ipod. i dont kno what to do. ive tried googling as much info as i can on this subject but i cant seem to find a answer to get me off to a good starting point. i back all my music up on a external hard drive.

    If the file was not originally from iTunes, you'll need to redownload it from it's original source or rerip it from the CD.  Files can sometimes go bad and become corrupted.  As to how or why that happens, there are a number of ways.
    What format are the problematic tracks in? Have you tried converting them to another format in iTunes?
    iTunes: How to convert a song to a different file format
    B-rock

  • Help request - Could need some help with a logo for my site

    Hi I'm working on a project and i have come across a huge problem.
    please check out my logo on this site:
    http://www.tuxxen.com
    I have no idea how i should make my logo and  it seems like i have no skills to make one either,  i have been trying for days to make one that look decent but it end up looking really really bad each time.
    Could really need some help to get a nice logo up, the site im working on is about fishing, the name of this site will be changed to: Absolut mete. So the logo need to have this name.
    I have managed to make the layout for my site but i cannot make a logo its a bit funny really but yeah...
    Any help are very much welcome!

    THANK YOU/___sbsstatic___/migration-images/migration-img-not-avail.png so the tolerance makes it not care so much about the gradations in color? what else is tolerence good for?
    I have a cleaner copy now after someone suggested GIMP, so played with it last night - though couldn't figure out transparency - that was clear on converter- just not cooperative till these wonderful directions.
    So now I know how to do it without messing with the pic, and with messing with it - both good lessons and got a bit brighter color out of the deal.
    many thanks for the straightforward and clear directions, they worked perfectly/___sbsstatic___/migration-images/migration-img-not-avail.png extra strars for you/___sbsstatic___/migration-images/migration-img-not-avail.png

  • TS1702 New IPhone4s using primarily for Internet overseas and FaceTime states it is waiting to activate need some help

    Need some help activating my face time on my new phone. Am overseas and not in phone range so trouble shooting is difficult

    I maybe completely off base (i don't have t-mobile) but it was my understanding that you would still need a 'data' plan for a) most of the applications to work and b) to receive service books etc and that the wi-fi would only give you access to 'website' and not the email etc.
    If the unit is rebooting, then it would be sign of a bad BB, I would recommend reinstalling the OS using the desktop manager but if you just got the unit and are still in the 15-30 day period (not sure how long t-mobile does a return) I would ask for a replacement unit.
    Again, not sure on the top part so hopefully someone else may have an answer for you.

  • I need some help , for create some paper on air

    Hi everyone
    I need some help , i work in a static sequence from Tehran street (1 frame), i paint damages on this frame in Photoshop because i need war atmosphere, then i add some smoke and cloud with particular .
    but i think this sequence is not realistic yet
    now i want add some moving paper in air and on street
    do u have any solution for how can i make this paper and moving those
    Thanks a lot
    and pardon me for bad English
    Ali Molavi

    The best tool to add this kind of particle is After Effects.
    If you have the Creative Cloud then I recommend you download that.
    Slightly annoying voice over, but here is a youtube tutorial you can follow top make floating particals. You can adjust it to make it look exactly as you want.
    http://www.youtube.com/watch?v=dq2op6yqvFk&noredirect=1

  • Need some help and guidance please!

    Hi everyone,
    I desperately need some help because I am at my wits end.   In September I purchased a Compaq Presario CQ60-450US.  Shortly after purchasing, I fresh installed Windows 7 Professional.  Recently I decided to tried to dual boot ubuntu on the machine only to find that the installation failed because of CD read error.  I know for a fact that the CD is not the issue because I have used this CD three other times to install ubuntu thus I came to the conclusion that the CD/DVD drive was bad.  
    I called HP support to get a new CD/DVD drive replaced only to spend 2 hours on the phone with a individual that decided to troubleshoot first trying to install ubuntu remotely (I informed the indiviual that the remote session would end), then by playing a DVD and "skipping throughout" the movie.  He/she said that she could see no issue.  (no diagnostic was run)I informed the individual that I had issues with buring as well.  He/she proceeded to go online and install software asking me to demonstrate the issue after which the call got dropped mysteriously.
    I called HP support back and told them that I am having an issue now burning.  They proceed to connect remotely and look at the software the previous support individual downloaded and said that the software was not supported by HP.  I informed the individual that I give permission to install any software needed to troubleshoot but the individual said that I could not be suppoted because I wasn't using the OS installed by HP.  I was instructed to recover my machine to the OS that was installed with the machine if I was to continue to get support.
    I informed the individual that the drivers and software are the same for either OS considering the CD/DVD rom is a plug and play device.  The individual refused to help and told me I had lost my warranty because of my decision to install an OS directly from Microsoft or a third paper vendor. 
    That is where I stand.  HP is refusing to give me support because I am not running their Vista Home edition even though my issue is hardware.  I cannot find any warrent information stating that I need to have the original operating system installed on the machine to receive support.   Can anyone point me to a reputable division that can help me with my issue?  I feel I was just thrown aside so that they don't have to initiate a repair.  If not has anyone filed a compalint against this outrageous support requirement?   

    Dear ndjumpball,
    I would like to say that I have some good -- or at least encouraging -- advice.  Regretfully, I do not.  I had issues with my dv7 practically since purchasing it a year ago specifically so I would have a reliable computer for school.  My first problem: I bought my laptop a mere 7 weeks before HP started offering their free upgrade to Windows 7.  Consequently, I was forced to purchase the full installation retail or continue to deal with the wonton freezes and system failures that inevitably occurred while I was working on homework -- courtesy of HP's installation of Vista Home Premium 64-bit.  Thankfully, I was able to purchase a copy of Windows 7 Professional 64-bit through a significant student discount offer from Microsoft, and I had my new OS downloaded the evening of October 23, 2009; I had to give their servers time to free up, since it seemed like everyone and their dogs were also downloading what the reviews posted on CNET and PC World touted as being more reliable.  I recall (I can't remember exactly which site this appeared) the statement, "Windows 7 is what Vista should have been from the beginning."
    I was all excited and happy now that I had a laptop for school that had everything I was looking for:  decent size hard drive, a fair amount of RAM, great 17.3" display with awesome colors, and a CDRW/DVDRW/Blu-Ray disk drive in the bay.  Not only was I very satisfied with the hardware; it also came with a decent host of software that are thought was pretty cool, too.  It came with CyberLink's DVD Suite 6 that I could activate simply by touching a soft button above the keyboard.  Aside from Vista Home Premium crashing on me at the most inopportune times, I was exceedingly happy with my $1000 purchase and investment.  Then came the "upgrade" to Windows 7 Professional 64-bit...Because I didn't have a "compatible" version of Vista, I had to do a full ("custom") install.  In other words, I lost all of the cool features I originally bought the machine for in the first place...no more cool one-finger's brush software activation (still don't have that working), and HP Chat Support told me the same thing they told you.  The following is a direct copy/paste quote from an email response I received from HP Total Care:  "In order to help you relevantly I would like to request you to please revert back to Vista operating system and check whether the issue is persisting or not.  If the issue is still persisting after reverting the operating system back to vista then we need to perform system recovery."
    After pursuing my case for 6 months -- finally getting my case escalated to two HP Customer Care Case Managers in Texas/Oklahoma -- the best "customer support" I received was what I'm sure was a truly heartfelt and sincere apology...  Oh, neither case manager was "able" to send me either the true upgrade disks that would have preserved the features purchased, nor were they willing to send me a stand-alone installation of the CyberLink’s DVD Suite 6 that is currently offered with the HP Pavilion dv6t Quad Edition series.  (In massive frustration and anger, I bought the CyberLink’s DVD software - $100 I didn't have to spend on something I had already bought...)
    A month later (late March), MY CD-RW/DVD-RW/Blu-Ray drive stopped working.  After an hour online with Customer Care, I had finally convinced the rep that the drive was working fine after my ditching Vista Home Premium, and that its failure had absolutely nothing to do with Windows 7 Pro.  After giving the guy my credit card number as security, I had a replacement drive shipped to me.
    My personal recommendation:  clearly state that the hardware failure had nothing to do with whatever software or OS you chose to install.  Bottom line:  your computer is only 8 months old and is still covered under warranty, they can replace the defective part, or you can return the entire machine.  You probably want to be the "Nice Guy" but you need to remind them that you have other brands available to purchase.
    I don't know if that helps or not, but thank you for giving me the opportunity to vent!  :-)

  • Bt infinity way to slow !!! Need some help

    We just got bt infinity 1 installed with home hub 5 as well, I did a speed test and it was only getting 10mbps download, 5 Mbps upload and 85 ping, is this good or bad. We currently have 10 devices connected to internet in this house, I can't even watch normal you tube videos in 480p, this is annoying as paid a lot of money for it, I know the problem can rely down to the amount I people connected, it may be also down to where the router is ? Need some help to how we can get best performance and how to share the connection between all of us or how to get more as on the best package available ? Thanks will need all the help as the internet is atrocious right now, almost as bad as our non infinity by home hub 2 we had a few days ago

    Can you run this checker and post back a screen shot of the results
    http://www.dslchecker.bt.com/adsl/adslchecker.welcome
    and use this speed tester then carry out the further diagnostics and post back a screen shot of all the results including your IP profile for up and down. This test must be done with a wired connection.
    http://speedtest.btwholesale.com/
    As you have a Homehub 5 can you also post the stats from 1-12 by logging onto the homehub management pages then troubleshooting > helpdesk. http://bthomehub.home/

  • Remote App on iPad connects but drops after about  20 mins. Need to turn  off wait about 1 minute then turn on wifi on iMac before it can reconnect. Need some help please.

    Remote App on iPad connects but drops after about  20 mins. Need to turn  off wait about 1 minute, then turn on wifi on iMac before it can reconnect. Need some help please.
    Already gone through troubleshooting guide a zillion times. Thanks.

    This worked for me... A little time consuming but once you get rolling it goes GREAT... Thanks....
    I got my artwork and saved it to my Desktop
    Opened up Microsoft Paint and clicked on "File" and "Open" and found it to get it on the screen to resize it
    Clicked "resize" and a box for changing it opened up
    Checked the box "Pixels" and "Unchecked maintain aspect ratio"
    Set Horizontal for 640 and Vertical for 480
    Clicked on "OK" and went back to "File" and did a "Save As" and chose JPEG Picture
    It came up "File Already Existed" and clicked "OK" (really did not care about the original artwork I found because wrong size)
    Went to iTunes and on the movie right clicked on "Get Info", clicked on "Details", then "Artwork"
    Go to the little box on the top left that shows your old artwork and click on it to get the little blue border to appear around it and hit "Delete" to make it gone
    Click on "Add Artwork" and find it where you put the one from above on your Desktop and hit "Open" and OK and your new artwork is now there and all good.
    Sounds like a lot of steps to follow but after around 5 or so you will fly through it. This worked perfect on my iPhone 6 Plus and I have artwork on my Home Videos now.

  • TS1702 I need some help the apps were downloading slowly

    The apps downloaded but it didn't cause it's stuck in downloading mode what should I do?
    The iOS 6 update didn't work.
    Please I need some help.
    The apps didn't download.
    Talking Angela and Ginger didn't download.
    Talking Santa didn't update.

    Try moving the existing backup file to a safe location so that iTunes has to create an entire new file.  The backup file is located here. You can delete that backup once you get a successfull backup.
    iTunes places the backup files in the following places:
    Mac: ~/Library/Application Support/MobileSync/Backup/
    Windows XP: \Documents and Settings\(username)\Application Data\Apple Computer\MobileSync\Backup\
    Windows Vista and Windows 7: \Users\(username)\AppData\Roaming\Apple Computer\MobileSync\Backup\
    Note: If you do not see the AppData or Application Data folders, you may need to show hidden files (Windows XP,  Windows Vista and Windows 7), or iTunes may not be installed in the default location. Show hidden files and then search the hard drive for the Backup directory.

  • Need some help: my itunes won't sync with my iphone anymore. Both softwares are up to date and I've reinstalled itunes. After I reinstall, it syncs. But then when I reboot my computer, it no longer syncs anymore and I have to keep reinstalling itunes. Tho

    Need some help: my itunes won't sync with my iphone anymore. Both softwares are up to date and I've reinstalled itunes. After I reinstall, it syncs. But then when I reboot my computer, it no longer syncs anymore and I have to keep reinstalling itunes. Thoughts???

    thought that it was possible to have the same iTunes library on any machine that was authorised, a kind of cloud-iTunes I guess. 
    That would convenient, but sadly it is not the case. Sorry!
    Either way your welcome and best of luck!
    B-rock

  • Need some help in creating Search Help for standard screen/field

    I need some help in adding a search-help to a standard screen-field.
    Transaction Code - PP01,
    Plan Version - Current Plan (PLVAR = '01'),
    Object Type - Position ( OTYPE = 'S'),
    Click on Infotype Name - Object ( Infotype 1000) and Create.
    I need to add search help to fields Object Abbr (P1000-SHORT) / Object Name (P1000-STEXT).
    I want to create one custom table with fields, Position Abb, Position Name, Job. Position Abb should be Primary Key. And when object type is Position (S), I should be able to press F4 for Object Abb/Object Name fields and should return Position Abbr and Position Name.
    I specify again, I have to add a new search help to standard screen/field and not to enhance it.
    This is HR specific transaction. If someone has done similar thing with some other transation, please let me know.
    There is no existing search help for these fields. If sm1 ever tried or has an idea how to add new search help to a standard screen/field.
    It's urgent.
    Thanks in advace. Suitable answers will be rewarded

    Hi Pradeep,
    Please have a look into the below site which might be useful
    Enhancing a Standard Search Help
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/daeda0d7-0701-0010-8caa-
    edc983384237
    http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee93446011d189700000e8322d00/frameset.htm
    A search help exit is a function module for making the input help process described by the search help more flexible than possible with the standard version.
    This function module must have the same interface as function module F4IF_SHLP_EXIT_EXAMPLE. The search help exit may also have further optional parameters (in particular any EXPORTING parameters).
    A search help exit is called at certain timepoints in the input help process.
    Note: The source text and long documentation of the above-specified function module (including the long documentation about the parameters) contain information about using search help exits.
    Function modules are provided in the function library for operations that are frequently executed in search help exits. The names of these function modules begin with the prefix F4UT_. These function modules can either be used directly as search help exits or used within other search help exits. You can find precise instructions for use in the long documentation for the corresponding function module.
    During the input help process, a number of timepoints are defined that each define the beginning of an important operation of the input help process.
    If the input help process is defined with a search help having a search help exit, this search help exit is called at each of these timepoints. If required, the search help exit can also influence the process and even determine that the process should be continued at a different timepoint.
    timepoints
    The following timepoints are defined:
    1. SELONE
    Call before selecting an elementary search help. The possible elementary search helps are already in SHLP_TAB. This timepoint can be used in a search help exit of a collective search help to restrict the selection possibilities for the elementary search helps.
    Entries that are deleted from SHLP_TAB in this step are not offered in the elementary search help selection. If there is only one entry remaining in SHLP_TAB, the dialog box for selecting elementary search helps is skipped. You may not change the next timepoint.
    The timepoint is not accessed again if another elementary search help is to be selected during the dialog.
    2. PRESEL1
    After selecting an elementary search help. Table INTERFACE has not yet been copied to table SELOPT at this timepoint in the definition of the search help (type SHLP_DESCR_T). This means that you can still influence the attachment of the search help to the screen here. (Table INTERFACE contains the information about how the search help parameters are related to the screen fields).
    3. PRESEL
    Before sending the dialog box for restricting values. This timepoint is suitable for predefining the value restriction or for completely suppressing or copying the dialog.
    4. SELECT
    Before selecting the values. If you do not want the default selection, you should copy this timepoint with a search help exit. DISP should be set as the next timepoint.
    5. DISP
    Before displaying the hit list. This timepoint is suitable for restricting the values to be displayed, e.g. depending on authorizations.
    6. RETURN (usually as return value for the next timepoint)
    The RETURN timepoint should be returned as the next step if a single hit was selected in a search help exit.
    It can make sense to change the F4 flow at this timepoint if control of the process sequence of the Transaction should depend on the selected value (typical example: setting SET/GET parameters). However, you should note that the process will then depend on whether a value was entered manually or with an input help.
    7. RETTOP
    You only go to this timepoint if the input help is controlled by a collective search help. It directly follows the timepoint RETURN. The search help exit of the collective search help, however, is called at timepoint RETTOP.
    8. EXIT (only for return as next timepoint)
    The EXIT timepoint should be returned as the next step if the user had the opportunity to terminate the dialog within the search help exit.
    9. CREATE
    The CREATE timepoint is only accessed if the user selects the function "Create new values". This function is only available if field CUSTTAB of the control string CALLCONTROL was given a value not equal to SPACE earlier on.
    The name of the (customizing) table to be maintained is normally entered there. The next step returned after CREATE should be SELECT so that the newly entered value can be selected and then displayed.
    10. APP1, APP2, APP3
    If further pushbuttons are introduced in the hit list with function module F4UT_LIST_EXIT, these timepoints are introduced. They are accessed when the user presses the corresponding pushbutton.
    Note: If the F4 help is controlled by a collective search help, the search help exit of the collective search help is called at timepoints SELONE and RETTOP. (RETTOP only if the user selects a value.) At all other timepoints the search help exit of the selected elementary search help is called.
    If the F4 help is controlled by an elementary search help, timepoint RETTOP is not executed. The search help exit of the elementary search help is called at timepoint SELONE (at the
    F4IF_SHLP_EXIT_EXAMPLE
    This module has been created as an example for the interface and design of Search help exits in Search help.
    All the interface parameters defined here are mandatory for a function module to be used as a search help exit, because the calling program does not know which parameters are actually used internally.
    A search help exit is called repeatedly in connection with several
    events during the F4 process. The relevant step of the process is passed on in the CALLCONTROL step. If the module is intended to perform only a few modifications before the step, CALLCONTROL-STEP should remain unchanged.
    However, if the step is performed completely by the module, the following step must be returned in CALLCONTROL-STEP.
    The module must react with an immediate EXIT to all steps that it does not know or does not want to handle.
    Hope this info will help you.
    ***Reward points if found useful
    Regards,
    Naresh

  • Need some help in debugging this exported script

    Below is DDL generated by visio forward engineering tool . The example below consists of 2 test tables with one foreign key.
    Forward engineering generated DDL script
    IF EXISTS (SELECT * FROM sys.objects WHERE object_id = OBJECT_ID(N'[dbo].[Table1]') AND type in (N'U'))
    DROP TABLE [dbo].[Table1]
    GO
    CREATE TABLE [dbo].[Table1] (
    [test] CHAR(10) NOT NULL
    , [test2] CHAR(10) NULL
    GO
    ALTER TABLE [dbo].[Table1] ADD CONSTRAINT [Table1_PK] PRIMARY KEY CLUSTERED (
    [test]
    GO
    GO
    IF EXISTS (SELECT * FROM sys.objects WHERE object_id = OBJECT_ID(N'[dbo].[Table2]') AND type in (N'U'))
    DROP TABLE [dbo].[Table2]
    GO
    CREATE TABLE [dbo].[Table2] (
    [test2] CHAR(10) NOT NULL
    GO
    ALTER TABLE [dbo].[Table2] ADD CONSTRAINT [Table2_PK] PRIMARY KEY CLUSTERED (
    [test2]
    GO
    GO
    ALTER TABLE [dbo].[Table1] WITH CHECK ADD CONSTRAINT [Table2_Table1_FK1] FOREIGN KEY (
    [test2]
    REFERENCES [dbo].[Table2] (
    [test2]
    GO
    GO
    When i converted this DDL script using scratch editor the migration tool gave some errors can anyone help me to resolve below
    DECLARE
    v_temp NUMBER(1, 0) := 0;
    BEGIN
    BEGIN
    SELECT 1 INTO v_temp
    FROM DUAL
    WHERE EXISTS ( SELECT *
    FROM objects
    WHERE OBJECT_ID_ = NULL/*TODO:OBJECT_ID(N'[OPS].[Table1]')*/
    AND TYPE IN ( N'U' )
    EXCEPTION
    WHEN OTHERS THEN
    NULL;
    END;
    IF v_temp = 1 THEN
    TRUNCATE TABLE Table1;
    END IF;
    END;
    CREATE TABLE Table1
    test CHAR(10) NOT NULL,
    test2 CHAR(10)
    ALTER TABLE Table1
    ADD
    CONSTRAINT Table1_PK PRIMARY KEY( test );
    --SQLDEV:Following Line Not Recognized
    DECLARE
    v_temp NUMBER(1, 0) := 0;
    BEGIN
    BEGIN
    SELECT 1 INTO v_temp
    FROM DUAL
    WHERE EXISTS ( SELECT *
    FROM objects
    WHERE OBJECT_ID_ = NULL/*TODO:OBJECT_ID(N'[OPS].[Table2]')*/
    AND TYPE IN ( N'U' )
    EXCEPTION
    WHEN OTHERS THEN
    NULL;
    END;
    IF v_temp = 1 THEN
    TRUNCATE TABLE Table2;
    END IF;
    END;
    CREATE TABLE Table2
    test2 CHAR(10) NOT NULL
    ALTER TABLE Table2
    ADD
    CONSTRAINT Table2_PK PRIMARY KEY( test2 );
    --SQLDEV:Following Line Not Recognized
    ALTER TABLE Table1
    ADD
    CONSTRAINT Table2_Table1_FK1 FOREIGN KEY( test2 ) REFERENCES Table2 (test2)
    --SQLDEV:Following Line Not Recognized
    ;

    Pl do not post duplicates - Need some help in debugging this script

Maybe you are looking for