Old 2006 MBP and connecting it to new 24 inch Apple LED Cinema Display

I really need to know which adapters in order to get my MBP does not have a mini DVI port it has the first version of the port but right now I'm getting confused in which adapter to get so it will work with the Apple LED Cinema Display???
hopefully someone knows
Thanks

There is no compatible adapter at this time.
(37325)

Similar Messages

  • Under Windows 7 Ultimate x64 and Boot Camp, my 27 inch Apple LED Cinema Display checks out as a Generic PnP Monitor and is shown as NOT HDCP compliant.  I haven't been able to find any kind of an .inf file to use.  Does anyone have a solution?

    Under Windows 7 Ultimate x64 and Boot Camp, my 27 inch Apple LED Cinema Display checks out as a Generic PnP Monitor and is shown as NOT HDCP compliant.  I haven't been able to find any kind of an .inf file to use.  Does anyone have a solution?  Or is Apple's implementation of HDCP (if it's there) incomplete?

    I am having this same issue. Im not sure if this is the cause but I think this is keeping PowerDVD Ultra 11 from playing back Bluray under Windows 7 / Bootcamp

  • MBP with New Apple LED Cinema Display

    Does anyone know whether it will be possible to use an early-2008 MacBook Pro with the new Apple LED Cinema Display? I know that the new display is made specifically for the latest MacBook, MacBook Pro, and MacBook Air with the mini-display port, but I wondered whether there will be some type of adapter offered so that an older MacBook Pro may be used with the new display (or whether this is even possible).
    Any input is appreciated.
    Joe

    No solution yet, but read the following:
    http://www.macworld.com/article/136196/2008/10/displayportfaq.html
    http://forums.macnn.com/65/mac-pro-and-power-mac/379042/new-cinema-display-mini- displayport-dvi/
    Webb
    Message was edited by: Jo Ann+Webb

  • New MacBook Pro & 27" Apple LED Cinema Display Don't Go to Sleep

    I recently purchased a new 13" MacBook Pro (MacBookPro8,1) and a 27" Apple LED Cinema Display. When they are connected the computer occasionally has a problem being put to sleep. When clicking sleep, the monitor will take a little while to shut off, but in about 10 seconds, it will turn back on. Immediately when turning on, the image on the screen is quite scrambled (it does correct itself). Usually, if I attempt to put it to sleep multiple times, it will end up working. When it does go to sleep (correctly), the screen will turn off much faster than the times where it doesn't sleep.
    Anyone else have a similar issue they found a fix to? When speaking to Apple support, they thought it was part of an issue with 10.6.6, however, the update to 10.6.7 did not solve the issue.
    PS - I keep my MacBook Pro lid closed when using the display.

    Is your 2.6 the CTO upgrade from the high end 2.3 15"?
    Yes, both will work under OSX and Windows. One note, when you boot Windows, you need to unplug the USB from the LED Cinema display or Windows will not boot. Once booted, then plug the USB back in to regain brightness, etc controls.

  • IMac retina 5K, able to run old Apple LED Cinema Display?

    I am considering purchasing a new iMac retina 5K but will I be able to run my old Apple LED Cinema Display with  Mini DisplayPort cable from this? and if so will each monitor retain their native resolution?
    Thanks for your time.

    yes they should I use an asus 27" 3d monitor with my imac 21" even though they use the same res but with air display my ipad 2 acted as 3th display and it don't do 1080p of cause so that had it's own res

  • 8800 GT vs. new Apple LED Cinema Display (27" flat panel)

    I would like to buy the new Apple LED Cinema Display (27" flat panel), however, have no idea if it is compatible with my Mac Pro. Bellows are the details of my desktop...
    Mac Pro (MacPro3.1) Quad-Core Intel Xeon 2.8 GHz * 2 (8 cores), with 12 GB DDRII 800 MHz.
    Graphics cards for Mac Pro (Early 2008): NVIDIA GeForce 8800 GT (part number 630-9191 or 630-9897)
    If it's not compatible, could someone let me know how to upgrade of what to make it work?
    Thanks!
    PJ

    Doesn't look hopeful.
    Apple LED Cinema Display 27"
    http://store.apple.com/us/product/MB571Z/A
    Obviously the ATI 5770, once it ships, will work.
    Apple Display tech note only addresses ATI 5xxx and only 2009-2010 Mac Pro models.
    http://support.apple.com/kb/HT4279
    Cutting off anything two years old, is now 'legacy'? I don't think they hope to sell their 27" to older Macs or PCs.
    In the product Q&A:
    *This looks great! Does this work with PCs?*
    Yes, but you'll need an adapter with a mini-displayport like the top of the line Radeon 5970 (they all have one MDP), or one of the 5870s specifically designed for Eyefinity (multiple displays). Search Newegg under graphics cards (advanced) and filter only cards with mini displayport. No other PC cards on the market, including Nvidia seem to have mini-displayport. It's a good interface, but I fail to see why Apple decided to loose customers to support it exclusively.
    +ADC is dead! long live proprietary technology!+

  • VMware Fusion and Apple LED Cinema Display

    I have a 2008 MBP and a 27" Apple LED Cinema Display. My OS is 10.7.2.
    I am running Windows 7 with the latest updates in VMWare Fusion 4.1.1. I have several issues.
    1) When I go to chose my monitor it say Apple LED Cinema Display but "Generic Non-PnP Monitor." I downloaded and installed the boot camp drivers as I understood those contained the drivers for the monitor, but that didn't seem to help. Do I need to have the Boot Camp drivers?
    2) When I try to access the Boot Camp Control panel in Windows 7 in Fusion I get "An error occured while tyring to access the startup disk settings. You may not have privileges to change the startup disk." My guess is this is because the Boot Camp drivers are only needed if you actualy run Boot Camp.
    3) In Windows I cannot choose the native resolution of the Apple display (2560 x 1440).
    4) The resolution ia 1277 x 1234. That is weird.
    5) If I minimze the Fusion window and then immediately open it, it looks fine. But if I wait for awhile and open it, the window will be black until I click inside of it.
    Something is wrong, Any help in fixing this would be greatly appreciated.
    Bryan

    you have to separate out what is Fusion and what is Windows native.
    Even doing updates to Windows sometimes should not or cannot be done properly in VM.
    And there is no way to change the default boot drive - a VM doesn't have access and that is the host OS's job, not the guest's.
    Install the latest AMD driver for mobility - and dont' use the "auto detect" - that is not going to work on Apple hardware.
    You dont' run Boot Camp. But the Apple drivers and serives needed for hardware support, yes, they aren't running or loaded.

  • Late 08 mbp to Apple LED Cinema Display

    is it possible to connect one of the new Apple LED Cinema Displays to a late 08mbp?
    thanks

    If the computer has a Mini DisplayPort, just plug it in. If not, use this component.
    (51664)

  • Apple LED Cinema Display connected to iMac 21.5" 3.33GHz

    I have an Apple LED Cinema Display connected to an older iMac 21.5" (late 2009) and I am using the Cinema Display as the main display. It is very dim though. The iMac's screen is brighter and this computer is actually way older than this LED Cinema Display. This LED Cinema Display should be way brighter, but I cannot adjust the brightness on it. There is no slider when I open display preferences. Anything I can do? Thanks.

    Brightness is controlled via USB.  Is the display's USB cable plugged into the computer?

  • Can i connect my MacBook Pro model:A1278 13 INCH Mini display (not thunderbolt) to the Apple led cinema display?, can i connect my MacBook Pro model:A1278 13 INCH Mini display (not thunderbolt) to the Apple led cinema display?

    I whanted to use my macbook pro in a larger deskop ,so if can somebody answer can i use my Macboook pro 13 inch, its a Minidisplay cable its not thunder bolt ,can i use it to a new apple led cinema display? Thank you!

    Never mind, I solved it.  Didn't know the converter needed a power source to operate (duh!)  Now I have that, it works just fine.......

  • Difference between a Apple LED Cinema Display (27" flat panel) and a Apple Thunderbolt Display (27-inch)?

    May i know the difference between a Apple LED Cinema Display (27" flat panel) and a Apple Thunderbolt Display (27-inch)? both products look the same to me, even the prices are the same, but the name of the product is different. Its so confusing! I want to purchase a secondary display for my 21" iMac, but idk the difference between the two.
    furthermore, another question i have is, is 27" the largest display i can get? is there larger ones (just the screen, not the computer)?
    please help, thanks!

    rae90 wrote:
    May i know the difference between a Apple LED Cinema Display (27" flat panel) and a Apple Thunderbolt Display (27-inch)? both products look the same to me, even the prices are the same, but the name of the product is different.
    One has thunderbolt capabilities, the other doesn't.
    is 27" the largest display i can get? is there larger ones (just the screen, not the computer)?
    No you can get a larger one.  Maybe not an Apple one, but certainly another brand.

  • How to connect multiple Apple LED Cinema Displays to MacBook Pro

    I have an Apple 24 inch LED Cinema display that I run from my MB Pro. I mainly use the MB Pro+ screen for document editing.
    I would like to run a second Apple 24 inch Cinema display from the MB Pro. I am presently running another monitor successfully via a Dynalink USB splitter but would really prefer to run a second Apple monitor. I have enquired at two Apple Stores and browsed lots of sites. Multiple monitors from MB Pro seems ok (as long as it's not two Apple monitors). I would be surprised if Apple is content to pass up the opportunity to sell more of these superb screens.
    Grateful for any advice and suggestions

    In addition to the one from Atlona, there are:
    <http://www.gefen.com/gefentv/gtvproduct.jsp?prod_id=9898>
    <http://www.kanexlive.com/c247dl>

  • 2006 MBP os 10.6.8 has stopped working w/Cinema Display - worked fine until 3 days ago

    Hello. Hope someone can help. My MacBook Pro 2006 Snow Leopard has worked fine when connected to external Cinema display monitor (mirrored display setting) up until 3 days ago. Now the external display remains dark (I've tried on different monitors with same result). Initially, I could restart the MBP, and the external display would restart, but that only worked a couple of times and now nothing. The MBP seems to "see" the monitor when I open system preferences, but the display remains dark. the MBP display is fine. Is there anything i can do to correct this, or is the problem with the the MBP being so old? I have ordered a new MBP and would like to keep this one as a secondary machine, but would like to limit expense to fix if I can.

    Hello. Hope someone can help. My MacBook Pro 2006 Snow Leopard has worked fine when connected to external Cinema display monitor (mirrored display setting) up until 3 days ago. Now the external display remains dark (I've tried on different monitors with same result). Initially, I could restart the MBP, and the external display would restart, but that only worked a couple of times and now nothing. The MBP seems to "see" the monitor when I open system preferences, but the display remains dark. the MBP display is fine. Is there anything i can do to correct this, or is the problem with the the MBP being so old? I have ordered a new MBP and would like to keep this one as a secondary machine, but would like to limit expense to fix if I can.

  • Mac Pro and two new Apple LED Cinema Display 27" brightness control

    Hi all,
    Have been using my new Mac Pro (HD5770) with one 27" display for a while and am loving it and to make my work easier I got one more 27" display but how do I change the brightness on the second display? Only the first one can be changed and it's a big difference in the colors on the displays.
    With Best Regards / Christian

    Make sure you have the display update installed. Look for the ambient light sensor control in Displays system preference to see if it's installed.
    <http://support.apple.com/kb/DL1107>
    <http://support.apple.com/kb/HT4293>
    Turn off mirroring.
    Do you have brightness slider for both displays?
    Try unplugging the USB cable for one display so you can adjust the brightness on the other.

  • How to connect a Apple LED Cinema Display (24") to a PC with an ATI 4850?

    Help!!!!
    I have a new MacBook Pro and the LED Display just rocks with it, but my PC... how do I connect this MASSIVE investment to my PC with an ATI 4850?

    Sadly, if there is no Mini Display Port on the 4850, you cannot.
    And there are no known adapters at this time.
    Thanks ... Ken

Maybe you are looking for

  • IHC Incoming payment - no posting on clearing account

    Hello together, I need some help with the processing of an external bank statement. I try to read an incoming payment from an external bank statement (MT940). When I post the bank statemenat with FEBAN I get two documents: one for general ledger and

  • Reversed accounting documents in the Liquidity Planner (calculation) module

    Hi all Did anyone work with changing the standard setup for reversed documents in SAP LI ? The standard settings will make such documents go to the INIT_TRANS liquidity item - but I want it to follow the usual assignment routines. I have found the No

  • GL Account Postings for Goods movement

    Hi, I have a requirement to setup a account determination for goods movement for charity. What happens is that at times goods are given out directly for charitable purposes. This is done using a direct goods movement using 562. I need to know what ki

  • WLSE, WDS setup need to add new WLAN interface !

    This wireless network setup got a WLSE and WDS and lots of Aironet 1210 One SSID with MAC authentocation Single network I mean the LAN and WLAN on same network We are in process of seperating WLAN and LAN by means of VLAN and want to retain the old s

  • Converting Web Page to PDF (What happened)?

    Something happened, either with an adobe update or to my PC, in the last 24 hours that has caused the convert to web page function within both firefox and chrome to no longer be usable for work purposes. Before web pages would retain their native loo