Old deleted pics always reinstalled after an update

Hi
Every time I update my phone I always do a back up first via iTunes and have to do the update via iTunes because I have a 5C with 8GB and can only update through iTunes because of lack of storage space.
The problem is, after the update, when my phone restores from the back up it always includes these old pictures from ages ago that I deleted ages ago.
I have checked iCloud online and deleted everything, and what is left is this
I think the old photos that keep reinstalling are in that 90.07KB but I cannot find a way of deleting them.
They aren't on my iTunes, when I go to iCloud.com nothing is there.
If I go to iCloud drive it says it is empty
I've been through iCloud on my phone and nothing there either.
My question is, how do I locate these old pictures and delete them permanently?
Thanks for any help you may offer

As I said earlier, I don't believe there are any photos stored on the device. Again, I believe this to be folder instructions, since you use photo stream. It could be instructions for who shares the photo stream, etc. The amount of data you report, and show in the photo is very small.
If it is worrying you that much, restore the device as new, and sync back your content manually, without using a backup. This would remove any content there may be on the phone and any other settings dealing with the photo library.

Similar Messages

  • ITunes won't start and asks to reinstall after iTunes10 update.

    iTunes won't start and asks to reinstall after iTunes10 update. I have tries reinstalling, but it comes up with it again. I have uninstalled every Apple program and reinstalled them but still the same.

    What's the precise text of your message, Callum? There's a few different ones I can think of that mention reinstalling iTunes.

  • Unable to delete some app's after lollipop update

    Hi! After I updated my Z2 to lollipop today, I moved some app's to my sd card. I was not aware that it was not working properly.
    Later I saw that the app's I moved cannot be opened or even deleted and when I reinstall them again they don't even show up. Can someone help me pls! I have attached a screenshot also.

    I would think that your sd card it's corrupted, what if you re-install lollipop but this time clear everything 
    PC Companion (PCC)
    Bridge (for Mac)
    Alternatives on How to backup Xperias
    http://talk.sonymobile.com/thread/36355
    "I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

  • Lumia 1520 back light soft touch buttons always on after denim update

    Hello i have installed dev prew in my lumia 1520 but no demin update was found, so i unistalled it then the update appeared. But now after the update my light sensor Works differently is less reactive and the back light of soft touch buttons is always
    in also during battery save mode. Can you help me? Thanks

    Hi, Damodred. For the best experience with the Lumia 1520 touch screen, we encourage you to set the touch sensitivity to normal. This can be done in the touch section of the phone's settings. To do this, go to Settings > Touch > Touch sensitivity > Normal. About the second concern, are you using the headphone that came with it? Does it happen regardless of the headphone that you are using? 
    We'll wait for you reply. 

  • 10.5.2 won't reinstall after recent updates to system

    ! You cannot install Mac OS X Update Combined on this volume. This volume does not meet the requirements for this update.
    This appears after trying to update MacBook after recent either Security, Airport or Time Machine, or perhaps another update since March 11, 2008.
    Anyone else seeing this?

    My precaution is to startup from another disk and run Disk Utility's Repair Disk routine periodically (about once a month). You can use your Mac OS X installation disk, or create a small bootable maintenance disk like my 20GB external drive (you can even use an iPod if it's big enough). If the update is significant, such as a dot dot system update, I also do this Repair Disk just before the update.
    Then BEFORE and AFTER the update, when booted back normally, I use Disk Utility's Repair Disk Permissions.
    When upgrading to the next major release (Panther -> Tiger -> Leopard), I use the Archive and Install installation instead of the default Upgrade installation.
    Going all the way back to Panther, on several PowerPC and one Intel Mac, I have never had a problem after doing an update using Software Update. And I install all available updates immediately.

  • Nokia N80 restore always fails after SW update

    Successfully upgraded unbranded Nokia N80 to the below:
    V 4.0623.0.41
    26-07-2006
    RM-92
    Nokia N80 (05)
    After update tried several times to restore phone content using genuine USB cable from two backups: one fresh incl. memory card and another 1 week old just the phone. PC Suite sometimes shows successful restore, sometimes a message that not all content was restored. The phone after restore always restarts with the message: "Phone will restart". No content is restored.
    SW: WinXP SP2; Nokia PC Suite 6.81.13.0
    Any advice will be appreciated.

    Fixed by 10.4.4

  • Broadcom-wl-dkms not reinstalled after kernel update

    I use broadcom-wl-dkms for my wireless card (Broadcom BCM4352 rev 03). All works well, until the kernel is updated.
    I expected dkms to rebuild the package automatically, but apparently something goes wrong in the process: after every one of the last few kernel updates, the module was correctly rebuilt on reboot, but not re-installed.
    root@tank ~ # dkms status
    broadcom-wl, 6.30.223.248, 3.19.2-1-ARCH, x86_64: installed
    broadcom-wl, 6.30.223.248, 3.19.3-3-ARCH, x86_64: installed
    broadcom-wl, 6.30.223.248, 4.0.1-1-ARCH, x86_64: installed
    broadcom-wl, 6.30.223.248, 4.0.2-1-ARCH, x86_64: installed
    broadcom-wl, 6.30.223.248, 4.0.3-1-ARCH, x86_64: built
    Running
    root@tank ~ # dkms install broadcom-wl/6.30.223.248
    wl:
    Running module version sanity check.
    - Original module
    - No original module exists within this kernel
    - Installation
    - Installing to /usr/lib/modules/4.0.3-1-ARCH/kernel/drivers/net/wireless/
    depmod....
    DKMS: install completed.
    does the trick, but ideally I wouldn't have to do that.
    Looking at dkms logs, I get that:
    May 17 20:41:10 tank systemd[1]: Starting Dynamic Kernel Modules System...
    May 17 20:41:10 tank dkms[443]: Kernel preparation unnecessary for this kernel. Skipping...
    May 17 20:41:10 tank dkms[443]: Kernel preparation unnecessary for this kernel. Skipping...
    May 17 20:41:10 tank dkms[443]: Building module:
    May 17 20:41:10 tank dkms[443]: cleaning build area...
    May 17 20:41:10 tank dkms[443]: Building module:
    May 17 20:41:13 tank dkms[443]: cleaning build area....
    May 17 20:41:13 tank dkms[443]: make KERNELRELEASE=4.0.3-1-ARCH KVERSION=4.0.3-1-ARCH....
    May 17 20:41:16 tank dkms[443]: make KERNELRELEASE=4.0.3-1-ARCH -C /usr/lib/modules/4.0.3-1-ARCH/build M=/var/lib/dkms/broadcom-w
    May 17 20:41:16 tank dkms[443]: cleaning build area....
    May 17 20:41:19 tank dkms[443]: cleaning build area....
    May 17 20:41:19 tank dkms[443]: Kernel cleanup unnecessary for this kernel. Skipping...
    May 17 20:41:19 tank dkms[443]: DKMS: build completed.
    May 17 20:41:19 tank dkms[443]: steamos-xpad.ko:
    May 17 20:41:19 tank dkms[443]: Running module version sanity check.
    May 17 20:41:19 tank dkms[443]: .
    May 17 20:41:19 tank dkms[443]: Kernel cleanup unnecessary for this kernel. Skipping...
    May 17 20:41:19 tank dkms[443]: DKMS: build completed.
    May 17 20:41:19 tank dkms[443]: wl.ko:
    May 17 20:41:19 tank dkms[443]: Running module version sanity check.
    May 17 20:41:20 tank dkms[443]: - Original module
    May 17 20:41:20 tank dkms[443]: - Original module
    May 17 20:41:20 tank dkms[443]: - No original module exists within this kernel
    May 17 20:41:20 tank dkms[443]: - No original module exists within this kernel
    May 17 20:41:20 tank dkms[443]: - Installation
    May 17 20:41:20 tank dkms[443]: - Installation
    May 17 20:41:20 tank dkms[443]: - Installing to /usr/lib/modules/4.0.3-1-ARCH/kernel/drivers/input/joystick/
    May 17 20:41:20 tank dkms[443]: - Installing to /usr/lib/modules/4.0.3-1-ARCH/kernel/drivers/net/wireless/
    May 17 20:41:23 tank dkms[443]: depmod...depmod....
    May 17 20:41:23 tank dkms[443]: DKMS: install completed.
    May 17 20:41:23 tank dkms[443]: .(bad exit status: 1)
    May 17 20:41:23 tank dkms[443]: -------- Uninstall Beginning --------
    May 17 20:41:23 tank dkms[443]: Module: broadcom-wl
    May 17 20:41:23 tank dkms[443]: Version: 6.30.223.248
    May 17 20:41:23 tank dkms[443]: Kernel: 4.0.3-1-ARCH (x86_64)
    May 17 20:41:23 tank dkms[443]: -------------------------------------
    May 17 20:41:23 tank dkms[443]: Status: Before uninstall, this module version was ACTIVE on this kernel.
    May 17 20:41:23 tank dkms[443]: wl.ko:
    May 17 20:41:23 tank dkms[443]: - Uninstallation
    May 17 20:41:23 tank dkms[443]: - Deleting from: /usr/lib/modules/4.0.3-1-ARCH/kernel/drivers/net/wireless/
    May 17 20:41:23 tank dkms[443]: - Original module
    May 17 20:41:23 tank dkms[443]: - No original module was found for this module on this kernel.
    May 17 20:41:23 tank dkms[443]: - Use the dkms install command to reinstall any previous module version.
    May 17 20:41:26 tank dkms[443]: depmod....
    May 17 20:41:26 tank dkms[443]: /usr/sbin/dkms: line 1873: echo: write error: Broken pipe
    May 17 20:41:26 tank dkms[443]: /usr/sbin/dkms: line 1875: echo: write error: Broken pipe
    May 17 20:41:26 tank dkms[443]: /usr/sbin/dkms: line 1873: echo: write error: Broken pipe
    May 17 20:41:26 tank dkms[443]: /usr/sbin/dkms: line 1875: echo: write error: Broken pipe
    May 17 20:41:26 tank dkms[443]: /usr/sbin/dkms: line 1873: echo: write error: Broken pipe
    May 17 20:41:26 tank dkms[443]: /usr/sbin/dkms: line 1875: echo: write error: Broken pipe
    May 17 20:41:26 tank dkms[443]: /usr/sbin/dkms: line 1873: echo: write error: Broken pipe
    May 17 20:41:26 tank dkms[443]: /usr/sbin/dkms: line 1875: echo: write error: Broken pipe
    May 17 20:41:26 tank dkms[443]: DKMS: uninstall completed.
    May 17 20:41:26 tank dkms[443]: Error! Problems with depmod detected. Automatically uninstalling this module.
    May 17 20:41:26 tank dkms[443]: DKMS: Install Failed (depmod problems). Module rolled back to built state.
    May 17 20:41:26 tank systemd[1]: Started Dynamic Kernel Modules System.
    Apart from telling me that the broadcom-wl install failed, I don't see much in there.
    Any clue on what's going on? Thanks!
    Last edited by Gyscos (2015-05-18 08:25:32)

    The open source driver might work or might not. For me it was extremely unreliable and slow. Use the broadcom-wl driver or b43 like ugjk suggests.The wl driver is in aur.

  • How can i retrieve my old email and contacts lists after software update?

    After updating the sfotware on my 3gs phone, i have lost all my contacts, calendar appointments, e-mails, etc. Is there any way to retrieve them?

    Contacts and calendars are designed to be synced with a supported application on the computer or a cloud service like iCloud, Google, or Exchange.
    Has the device been used as designed?  If so, simply re-sync them.
    Did you actually allow the device to finish restoring after installing the update?

  • Won't start-up, can't reinstall after latest update

    I was running the latest update that included a os x combined update and a firmware update. All was going well, and then the laptop restarted with the firmware update progress screen. The computer restarted abruptly, and never started up correctly since.
    Here's where I am now:
    The boot process is very slow and takes much longer then usual. Eventually my desktop background loads, along with the desktop icons. The menubar on top loads too. The dock does not load, and I can't open anything through the desktop icons. I can use quick-preview (pressing spacebar), but can't open any application. None of the dropdown lists work on the menu bar. Occasionally, the screen switched to black and blue and back to the usual desktop.
    Nothing works, opens, or can be accessed. Even the power button works, I need to shutdown with shift-control-option-power.
    I tried to reinstall osx, or at least access disk utilities to make some repairs.
    If I press option during the boot with the CD in, nothing happens, and I wind up the same position as described above.
    If I press C instead, I get a kernel panic during the boot process.
    I tried the CD on a different mac, and it worked fine.
    I'm stuck!!! Can't reinstall, can't fix, can't access!!!
    Any ideas or experiences with fixing this?

    What's the precise text of your message, Callum? There's a few different ones I can think of that mention reinstalling iTunes.

  • My apps won't reinstall after I updated to ios7, and they say "waiting" and won't download

    I updated last night and the main apps I use are still in the "waiting" phase

    Tapping and rebooting has not helped me.  It is Gmail.  I can open from the App store download.
    I am unable to delete the app either.
    I have the same problem on my iPad with two apps.

  • Youtube was deleted from my ipad after an update. how can I get it back?

    I updated my iPad 2 and youtube got deleted somehow. It is not under restrictions, and I don't want to have to restore my entire iPad. What do I do?

    YouTube is  not now part of iOS 6. However, you can download the YouTube app at http://itunes.apple.com/app/youtube/id544007664.
    See this similar post https://discussions.apple.com/thread/4335468?tstart=30
     Cheers, Tom

  • Trouble deleting only rejected clips after imovie update

    When i send rejected clips to the trash, it pulls more of the original video with it.  How can i keep this from happening? Only started with the new Mavericks update.

    I've seen one suggestion relating to Revealing the Clip in the Finder. Try this:
    Go to the Reject Clips by clicking on the pulldown menu at the bottom where it says Show: (choose Rejected Clips Only). Then <CTRL> click on on of the red striped thumbnails choose Reveal in Finder. When the Finder window launches, your clip will be highlighted. Select it and drag it to the trash.
    Quit iMovie, then relaunch it and go back to the Show: (Rejected Clips Only) see if that clip is now missing from the list of Rejected Clips. If this works and your Project file still plays back successfully I would say it's safe to continue deleting as needed. But if you have some problems and the Project has been affected there might be another reason you cannot delete the clips.
    iPhoto Videos are not deletable in the traditional iMovie Rejected Clips kind of way. They are under full control and jurisdiciton of iPhoto. And as a result, iMovie is not allowed to do anything other than 'copy' or re-use them in a Project. Deletion of iPhoto Videos in iMovie will not work. So your only real option is to try deleting them from iPhoto instead. So just be aware of where your video clips are located in the iMovie Event Library and everything should be OK.

  • 80GB iPod Classic looks to have deleted all my songs after iTunes update - please help!!!

    I know there have been topics about this in the past, but I haven't found a solution to my particular case in any of them. So I'm sorry that this topic may seem redundant, but I really need help.
    I have an 80GB iPod classic I bought 5+ years ago. It has been running fine for months. After I downloaded and installed the new iTunes upgrade however, when I connected the iPod it gave me the message "iTunes cannot read the contents of .... iPod. Please restore etc". I really don't want to have to restore it and lose my music, as it is almost full of music, much of which is hard to find. I don't often back up my library (I know, I know), but I have one from a few months ago I can use if I really have to (it'll be better than starting completely over), but I don't know where that would be saved on my computer. My music isn't saved in another folder so simply restoring and putting the music back into my iPod isn't an option either.
    I am running Windows XP home edition if that helps with solutions.
    Please help me, I really don't want to have to start my music collection from scratch.

    I did a mistake

  • My safari wont open error reads "safari quit unexpecatly" with a yellow warning sign, can i delete safari and reinstall after, my safari wont open error reads "safari quit unexpecatly" with a yellow warning sign, can i delete safari and reinstall after

    can any one help with this matter.. my safari wont open getting a warning message every time saying "safari had to close unexpecatly" i can still get on the internet via Opera fomr the app store, also my computer is saying that mountain loin wont work i have enough storage and ram on my air to run mountain lion

    Hi robsterc,
    Now, is it just me or does EVERY SINGLE update to OS X cause a problem with Sarafi - I can remember Safari having issues with at least the last 3 updates.
    Usually this happens when you have 3rd party extensions installed that are not compatible with the latest versions of Safari.
    Can you post the crash report text here and hopefully that will give us a clue where the root of the problem is. You can obtain the crash report text by clicking the (Report...) button in the Unexpectedly Quit window and then copying and pasting the text here.

  • ITunes didnt reinstall after its update?

    Ok I updated iTunes like it asked me to, restarted my computer and went into Ubuntu before I had to restart to go back to windows.
    Now down in my quick click tool bar, I dont have an iTunes icon, but a program icon and it tells me action is only valid for installed applications?
    So did it not download all the way?
    I dont want to download it twice if I dont have to.
    What should I do?

    this probably isn't helpful to you, but i'm having the EXACT same problem. =\
    it won't even let me uninstall it...how about you?

Maybe you are looking for

  • Single project report for Plan values, Budget values,commitments & actual

    Hi experts, Highly appreciated if any experts can let me know report which can be used to view Plan values, Budget values , commitments & actual values for each and every WBS levels for given project. I need one report to view all mentioned fields. K

  • Creating network between Mac and Linux

    Hello guys! I need to set up network between my iMac and Ubuntu linux. iMac is connected in internet by Airport and Fon Wifi Router witch is connected in router which is connected to adsl -modem. My pc is connected directly to router. Both computers

  • Tab 2 a10-70 won't turn on...

    Hey guys, I have a month old Tab 2 a10-70 that just won't turn on. It was working before then suddenly when the battery reached zero, it shut off. I plugged it back into the charger and it turned on once or twice then nothing. It went to the startup

  • Smart Collections By Label Name

    Since we have the ability to have multiple label sets, I think it would be better if we could use label names to create smart collections instead of just label colors.

  • How to create a database dynamically

    I am trying to create mysql database dynamically through java. Also please help me how to execute *.sql file in java.