Old FP-1000 app developed with LabVIEW 5.1.1, not running correctly since updating to MAX 4.5/FP6.0.2
I have an old application built under LabVIEW 5.1.1 which opens an .iak file (the file path is embedded in the app) and reads/writes to modules attached to an FP-1000. Recently I was forced to move the setup onto a new PC and now I'm unable to get the app to communicate with the FP hardware. The new PC has recent drivers installed (MAX 4.5, FP drivers 6.0.2). From MAX, I can open the .iak file and communicate with the FP hardware, so I'm unsure of where the problem lies. Are there version limitations with such old LabVIEW code and new FieldPoint drivers? Sorry, I haven't visited this setup for a long time (nor did I create it originally), so I'm a bit rusty on FieldPoint setups. Any guidance would be much appreciated - I'm trying to avoid having to redevelop the app.
Thanks,
Dave
David Boyd
Sr. Test Engineer
Philips Respironics
Certified LabVIEW Developer
Thanks, Chris, for replying.
I have every version of LabVIEW from 5.0 through 2009 beta available, though not presently installed. I was trying to avoid having to bring this app back into the development environment.
Since I posted last, I experimented and fixed the issue. I took a current copy of FPLVMgr.dll (version 6.0.0) and dropped it into the support directory for the app, replacing the old (3.0.0) DLL which was there. So, the answer to my question seems to be, an old LV executable can use a new FP DLL, and apparently must do so if the MAX/FP driver installation is updated.
Hope this info is useful to others.
Dave
David Boyd
Sr. Test Engineer
Philips Respironics
Certified LabVIEW Developer
Similar Messages
-
Help needed - app developed with 3.6, yet will not load - asking for 3.2 swz
Hi
I'm developing a flex 3 application
I recently uploaded an update to a test environment and bumped into a strage behaviour
the project started a while back and went through a number of versions of the sdk, namely 3.2, 3.5, 3.6
the project is clearly set for 3.6 now and I made sure both the framework swf & swz were uploaded to the same location of the index html page and the application swf.
for some wierd reason, when I test it on other computers, it displays the built in preloader, but fail to load the application,
this is because during the preloading phase the framework is not yet loaded and initialized.
when I checked the network monitor, it showd me a call to the 3.2 version of the flex framework, that could not be loaded
I've made sure again - a - that my project uses 3.6 sdk, and b - that all versions of the framework (3.2, 3.5, 3.6) are up on the server.
any Ideas on where I can go from here?
it would be really appreciated
cheers
YarivHi and thank you for your comment
I've made sure all sdk's and dependencies in the project lead to the right location on the hard drive where the 3.6 SDK is located
it did not change anything
when I test it on other computers and check the network monitor
it still asks for 3.2 swz for an unknown reason
the thing is, even when I've uploaded 3.2 swz & swf to the server
the call for them is still returning a 404 not found...
this is really fastrating
any other ideas please?
thanks
Yariv -
when itunes upgraded my laptop went to 100% cpu usage. only solution was uninstall. have tried itunes again as my daughter wants the new ipad. still same problem tho so not keen to spend £400 on new pad without pc support. anyone help? (ps been using ipod touches 1 and 2, been great source of pleasure for my two girls, but cant sync them, so using the little shuffles for music, syncing to an old version of itunes on an old netbook - had the sense to switch off upgrades when the new version went wrong)
Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US -
App developed with AIR 1.5 (or Flex 3 sdk) export to Tablet
I have an enterpise app maked with Adobe AIR 1.5, developed with Flex 3 SDK and halo components (MX not Spark).
I want to export this app to a tablet for my client (this app is very easy to use in a touch screen). But i supose that i have to rewrite all app in Flex Hero SDK (and export with AIR 2.6) and its hard.
Anyone has export an app developed with Air 1.5 or Flex 3 SDK to a tablet of android, blackberry or IOS with AdobeAIR 2.5 or 2.6?
Perhaps it could run in a tablet of Windows 7 but this tablets seems realy poor...
Thanks guys!Anyone has an old app made in flex 3 or air 1.5 who wants to export an tablet?
-
In the development center we use Labview 6.01, in the testcenter we use labview 5.
Additionally, in the development center we use a unix version of Labview and in the testcenter a Windows version.You can Save with Option to save VIs as version 5.
Unless your VIs deal with system files in UNIX or Windows (ie. Registry...)
then you have to develop your VI specificly on that OS, since UNIX and
Windows have different ways to deal with system files. Mostly, LabVIEW is OS
independent. I used to have VIs developed from LabVIEW v.3 on UNIX, I can
still open these files from LV v.4 on Windows. Now I can still work with
these VIs on LV 6 on Windows.
Good luck,
Nam.
roybra wrote in message
news:[email protected]..
> I created an application on a machine with Labview 6.01, can I run
> this application on another machine that has labview 5?
>
> In the development center we use Labview 6.01, in the testcenter we
> use l
abview 5.
>
> Additionally, in the development center we use a unix version of
> Labview and in the testcenter a Windows version. -
In my pc my AIR app run correctly but when i try to open it in other pcs not run correctly
hi friends
any one can help me please...
i had created air app very nice about my school ,so after i build the application and test it in my pc its run correctly without problems, but when i to try open after installed it
in other pcs the program not run correctly exactly show me empty window with progress dots like this :
with my respectsWhat are you expecting to display? Is it data? Images?
It's possible that you've written your code such that it references a path on YOUR specific machine. Always try to avoid references to C:/ or /<yourUserName>/someFolder as you're not guaranteed that they'll exist on other machines. -
Labview error GPIB controller not adressed correctly
I get this Labview error: GPIB controller not adressed correctly (LV5.1, win NT4) when i try to send data to a HP4275A LCR meter. How ever it works on an older system running with LabView 5.0 (also NT)!!!
How can I get rid of this problem????Hi Diego, thanks for the hints!
I tried to configure (GPIB) everything standard.
when I try a 488 command initialze, I get the controller conflict, when i don't do this I get atime out problem either by 488 write-command or by 488.2 send-command.
the differences between the systems where it works and where not are:
working: Win 95, LV 5.0, GPIB-card/TNT (plug & play)
not-working: WinNT, LV 5.1, GPIB-card/PCI
i tried to set baord config to the same parameters...
on the faulti system however I see the instrument with the MAX and I can send commands, without problems !!!!
Also the driver you posted does not work (but the NI-communicate program ;-)
i have no clue what else to do!
btw. how do I copy the spy output when running the program? I may provide
this to find errors.
Since MAX indicates the board is all right I guess it is not necessary to reinstall the boarddrivers?! -
could not install mountain lion We could not complete your purchase. OS X Mountain Lion is not compatible with this computer. I'm running the latest update 10.6.8. Any help to overcome this issue will be great
rarramirez wrote:
Any help to overcome this issue will be great
There is nothing to overcome, your mac is too old to run Mountain Lion. For an iMac it must be a (Mid 2007 or newer) http://www.apple.com/osx/specs/ -
phone will not connect with iTunes, so you can not run, and I unlocked it and got the message that it is unlocked and I have to connect with the tunes.
Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
Frozen or unresponsive iPad
Resolve these most common issues:
• Display remains black or blank
• Touch screen not responding
• Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
iPad Frozen, not responding, how to fix
http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Cheers, Tom -
Sharepoint Apps not running Correctly
Hi all,
Im having some difficult with sharepoint apps, on Sharepoint 2013, running under Server 2012/IIS8
I have gone ahead and created the necessary DNS zone, and also the appropriate Service and App application pools, as per the MSDN document.
The apps are downloading correctly, and I can add them to my site. Upon opening them (all), I am prompted for credentials as normal, but when the app opens up, it isn't functioning properly.
In particular, only part of the page displays. The sharepoint icon on the top left displays the broken link icon, and while I can click on some of the app functions, there are no text boxes, and I cannot save or run anything from the app menu. Suspecting
the issue was with IIS, I checked the http logs, and i am seeing several HTTP error codes, in particular several 500 0 0 15 when requesting a page called allsitecontent.aspx from within the app.
I have checked out the application pool sharepoint is running in under IIS, and everything seems to be set to default.
Does anybody have any ideas or insight as to what might be causing this?
Thanks for your help,
BrianI am also having an issue with apps displaying correctly I have configured sharepoint foundation with a separated AD contorler running on a different server. I can get the app to appear but the page does not render correctly. (Master page not showing with
app). Any ideas any one??? -
I have updated to version 11 of itunes and now it wont open comes up with comment saying it is not installed correctly or corrupt. Help
A complete uninstall/reinstall is worth a crack with that one:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7 -
Has anyone else had issues with phone network being unavailable on iPhone 4 since updating to iOS 5.0.1? My iPhone 4 is continually searching for a network and does not find AT&T, my provider. I swapped SIM cards with another iPhone 4 running ios 4 and established this is a device problem, not a SIM card problem.
Does the device get any signal?
Sounds like the device may have had a hardware failure. If it is out of warranty, the only option is the Out of Warranty replacement.
AppleCare is only an option if it is still under the original warranty. -
Hi
DECLARE @XMLA nvarchar(3000)
, @DateSerial nvarchar(35);
-- Change date to format YYYYMMDDHHMMSS
SET @DateSerial = CAST(GETDATE() AS DATE);
--SELECT @DateSerial
Set @XMLA =
N' <Batch xmlns="http://schemas.microsoft.com/analysis services/2003/engine">
<ErrorConfiguration xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddl2="http://schemas.microsoft.com/analysisservices/2003/engine/2"
xmlns:ddl2_2="http://schemas.microsoft.com/analysisservices/2003/engine/2/2" xmlns:ddl100_100="http://schemas.microsoft.com/analysisservices/2008/engine/100/100" xmlns:ddl200="http://schemas.microsoft.com/analysisservices/2010/engine/200"
xmlns:ddl200_200="http://schemas.microsoft.com/analysisservices/2010/engine/200/200">
<KeyErrorLimit>-1</KeyErrorLimit>
<KeyNotFound>IgnoreError</KeyNotFound>
<NullKeyNotAllowed>IgnoreError</NullKeyNotAllowed>
</ErrorConfiguration>
<Parallel>
<Process xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddl2="http://schemas.microsoft.com/analysisservices/2003/engine/2" xmlns:ddl2_2="http://schemas.microsoft.com/analysisservices/2003/engine/2/2"
xmlns:ddl100_100="http://schemas.microsoft.com/analysisservices/2008/engine/100/100" xmlns:ddl200="http://schemas.microsoft.com/analysisservices/2010/engine/200" xmlns:ddl200_200="http://schemas.microsoft.com/analysisservices/2010/engine/200/200"
xmlns:ddl300="http://schemas.microsoft.com/analysisservices/2011/engine/300" xmlns:ddl300_300="http://schemas.microsoft.com/analysisservices/2011/engine/300/300">
<Object>
<DatabaseID>MultidimensionalProject5</DatabaseID>
<CubeID>giri</CubeID>
<MeasureGroupID>Fact Internet Sales</MeasureGroupID>
</Object>
<Type>ProcessFull</Type>
<WriteBackTableCreation>UseExisting</WriteBackTableCreation>
</Process>
</Parallel>
</Batch>';
EXEC (@XMLA) At SHALL-PCAdventureWorksDw ;
iam executive the query when iam getting below error.
[Execute SQL Task] Error: Executing the query "DECLARE
@XMLA nvarchar(3000)
, @DateSerial nvarch..." failed with the following error: "Incorrect syntax near '-'.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set
correctly, or connection not established correctly.
how to solve this error;
please help meWhat are you trying to do? What sort of data source is SHALL-PCAdventureWorksDw?
When you use EXEC() AT, I would execpt to see an SQL string to be passed to EXEC(), but you are passing an XML string????
If you explain why you think this would work in the first place, maybe we can help you.
Erland Sommarskog, SQL Server MVP, [email protected] -
Hi .
I was creating the pass the values t in temp tables though s sis package vs2012 .
First I was taken on executive SQL TASK.
IN EXCUTIVE SQL TASK . I was write the stored proce:
Sp;
reate procedure USP_GETEMP2333
AS
begin
Select eid,ename,dept,salary from emp
end;
create table #temp(eid int,ename varchar(20),dept varchar(20),salary int)
insert into #temp
exec USP_GETMP02333
go.
It was executive correctly.
I was taken another sequence container. In the sequence container iam creating one executive sql
In 2<sup>nd</sup> excutive sql task: sql statements is
if object_id('emp_fact_sal') is not null
drop table emp_fact_sal
select eid,ename as emp_name,sal_bar=
case when salary<=5000 then 'l'
when salary >5000 and salary<=7000 then 'm'
else
'h'
end
into emp_fact_sal from #temp.
and one falt flies it was taken to designation .
iam changing all connection properties:
in oldeb connection:
in excutive sal task properties .
delay validation is true,
and retain connection maner is also true,
and package mode is 64 bit is false.
But iwas excutive in 2<sup>nd</sup> excutive ql task .
Iam getting this type of errors,
[Execute SQL Task] Error: Executing the query " if object_id('emp_fact_sal') is not null
drop ta..." failed with the following error: "Invalid object name '#Temp'.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established
correctly.
Please help meArthur suggestion works but you shouldnt even be doing this on a SQL Task.
Use a data flow task. You'll have better control over the data that is being transfered and get better performance because no staging table will be used.
Just because there are clouds in the sky it doesn't mean it isn't blue. But someone will come and argue that in addition to clouds, birds, airplanes, pollution, sunsets, daltonism and nuclear bombs, all adding different colours to the sky, this
is an undocumented behavior and should not be relied upon. -
There any way to re-sign the app developed with Adobe DPS?
Hi Everyone , I explain a problem that I have with DPS Single Edition ( it useful that is until May ) to see if anyone knows a solution. I have developed an app for a client , but the client wants to publish the app in Apple Developer with your name . How to export the .ipa or .zip Dps asks certificates Apple account and logically put mine ... (customer is a large company and I do not give me your passwords Apple etc ) you know if there any way they can re-sign the app ? As you do when you develop an app for a client who wants to publish on their own?
Ok they'll ask my client to send me those files.
With notifications no problem because the app does not.
With respect to Itunes connect and publication in the AppStore, will my client who is responsible for publishing the app, complete data etc. from their own.
Your help has been very helpful to me.
Maybe you are looking for
-
Standard Report not Displaying 'SAVE LAYOUT' Option
Dear All, Using Tcode VF44, i am getting output list.But in that list when i click on select layout option from toolbar its not displaying 'save layout' Option. can anybody give me soln for the same.How can i get that option? Regards, Mayank
-
How do you remove multiple email messages at one time
I have a iphone 4 and today it started piling up over 4000 undeliverable messages for no apparent reason. I somehow managed to stop the process but I am left with over 4000 messages that I need to delete. How do you remove multiple email messages at
-
Why we dont have a sales order in case of Intercompany Stock Transfer?
Hi, Why we don't have a sales order in case of Intercompany Stock Transfer?
-
What's the path and file name for the program to make window xp recovery cd?
I need to replace a hard drive, so I have to make a set of CDs to install windows XP, but in ACCESS IBM, I cannot find the program to make window xp recovery cd as instructed on the website. where can I find it? Thanks solved, thanks anyway. mine i
-
Can't translate without MacLink Plus
I just bought a Mac Mini to replace my out-of-date eMac. However, my MacLink Plus doesn't work on Lion and I have an AW6 doc Pages refuses to translate (it's a spreadsheet). Does anyone have any suggestions? Fred J.