Older HP Laptop....Need help identifying FCC ID

Hey Guys. I am hoping somebody can help me. I'm from the UK but in possesion of an american laptop (actually the fiance's) She sent me it asking if I could fix it for her. It's a HPze5200. I tried to send it back to her just before christmas but customs refused it (because it didn't have the FCC whatever it is) I been looking on the base of the laptop but not sure what it is.

I looked at the service manual, too. There is nothing depicted which looks anything like these two things. HP Service Manuals have improved a lot since this thing was created; very sketchy and bare bones. I am going to go out on a limb and say the flat shiny thing is a bracket for something like the optical drive, or it maybe holds the video cable in place after it has been plugged into the motherboard. The other thing looks like a button to eject something like from the card reader. I would say neither is critical to the functioning of the system, but the absence of the spring-loaded thing will likely mean if you put a card or whatever in the slot it may be hard to get it out.

Similar Messages

  • I need help identifying an old Macintosh game: it was a painting game where you rode a roller coaster to an art museum and you got to pick what kind of art work you were going to make. This was the early 90's and I've been trying to hunt it down

    I need help identifying an old Macintosh game: it was a painting game where you rode a roller coaster to an art museum and you got to pick what kind of art work you were going to make. It was animated, 2D i believe. This was the early 90's and I've been trying to hunt it down. I think there was some kind of animal in it, a giraffe maybe?

    Could you be thinking of Microsoft Home's "Fine Artist" for Macintosh, as shown in this Amazon.com listing?  This program was bundled with the Performa series of Macs during the mid-90s.

  • I need help identifying which Magsafe Power Adapter I need for my Macbook Pro Model A1398, EMC 2673?

    I need help identifying which Magsafe Power Adapter I need for my Macbook Pro Model A1398, EMC 2673?

    Provided the computer-end fits, you are free to use one with a HIGHER Wattage rating. No damage whatsoever will be done to any component, but it will likely run cooler (but may be slightly heavier).
    If you use one with too LOW a Wattage rating, you will not be able to charge and run at the same time, and your computer's top speed (for its most intensive computations) will be limited.

  • I bought an iPhone recently and since  then I cannot get my email on my MacPro laptop-need help please

    I bought an iPhone recently and since  then I cannot get my email on my MacPro laptop…need help please

    Good day colletteA11,
    If you are having an issue with being unable to receive email on your MacBook Pro, I would suggest that you troubleshoot using the steps in this article - 
    Mail (Yosemite): If you can’t receive messages
    Thanks for using Apple Support Communities.
    Safe computing,
    Brett L 

  • MSI P67A-G43 (B3) - Need help identifying this postcode

    Need help identifying this postcode:
    CPU:i7-2600k
    Mobo:MSI P67A-G43 (B3)
    PSU: Corsair 750w
    GPU isn't the problem since I replaced it and still get this postcode. RAM isn't the problem since I've tried four different sticks one at a time in each slot and still get the postcode. Getting no live video from the GTX580 and no onboard video. I think either the mobo or the CPU is the problem, don't want to have to send both in for RMA so if anyone can help me identify the postcode that'd be great.

    Hey Ctrl
    Well I happen to have the same beep code on my motherboard (P67A-C43 B3), after trying different suggestions from the MSI forum users and MSI technical support I ended up RMA(ing) my motherboard.
    You can try resetting the CMOS, by flipping the battery and leaving it like that for 5 minutes and putting it back to its original side. I highly doubt it is your cpu. Like anybody in the forum might suggest, try different components which appears you already did. I doubt your corsair is faulty. CPU and motherboard are your best bet that are faulty, and i highly doubt that it is the CPU because for there to find another person (you) that had the same problem as me since last friday (RMA board yesterday, wednesday) I find it highly unlikely.

  • Need help on FCC

    Hi All,
    i need to do FCC on the receiver side and the sender is IDOC.  The structure looks like this.
    <Header>
          <abc>
           <def>
    <DetailData>
            <A>
             <B>
             <Items data>
                        <AB>
                         <CD>
               <itemscheck>
                          <XY>
                          <RS>
    <Footer>
               <XYZ>
               <DEF>
    I Know how to do FCC if itemsdata and items check are in the same level as of detaildata but it is present under Deatail data,so any one can please help me how to do FCC in this case.
    Thanks,
    Hemanth.

    Hi,
      try these wil b of help
    Content Conversion ( The Key Field Problem )
    Re: Problems with File Content Conversion
    Re: Bypassing a node in Content Conversion
    Re: How to use content conversion for Complex structure
    Re: Content Conversion with Substructures
    File Adapter - Content conversion parameters at Receiver
    Edited by: ROBIN C on Dec 9, 2008 12:23 PM

  • New laptop need help with itunes.

    okay so i got a new laptop for xmas and i want to transfer my songs from my old desktop to my laptop. is there a way i can load my ipod onto my laptop and use that to transfer songs.
    my friend said that when i plug in my ipod to my blank itunes it will erase my songs. is there a way to download my songs to my laptop from my ipod?
    i really need help!
    THanks for the help.
    xo kaiit
    windows dell Windows XP

    Your friend is right. the iPod cannot be used to update iTunes. I had the same problem about a year ago, and I just transferred each song using my jumpdrive. It's painstakingly boring, but it will work without wiping anything clean.

  • Need help identifying controller information in hyperdraw

    Hello,
    Sorry if this is a dumb questions, but I'm in the middle of a project and need help ASAP. In one of my tracks (Real Guitar) there is some form of controller information present at the start of the track and I have no clue what it is! Is there a preference/key command that shows all data in hyperdraw, and then lets you select it (similar to the way the matrix editor works if you double click in the background, and then click on a specific note?)
    Thanks in advance for any help you can provide!

    Jonathan,
    I use the method that Jim suggested. I have the "H" key programmed for autodefine. (I've also got another two keys programmed to simply turn hyperdraw on and off for the selected region(s)). Autodefine is very cool. If there are, say, 4 different controllers in the track, hitting H the first time will show you the lowest-numbered controller; hit it again and it shows you the next higher number controller, and so on. The controller number is displayed in the lower LH area of the hyperdraw display for each region.
    If a track contains controller information for multiple channels, you'll see two numeric values in the lower LH corner -- the controller number and MIDI channel for that controller, separated by a comma.

  • Need help identifying internal parts on pavilion dv9930 laptop

    Need to know and get pictures of internal parts and indentfy what im missing next to the memory on a hp pavilion laptop model dv9930 looks like missing some type watch battery also something with 3 wires tha are numbered on a computer that was given to me and also what type of power cord would I need please help so I can determine if it is worth fixing really need a computer trying to get back in school and just got outof prison so not much money to work with any help not much knowledge of computers but believe I can do if get diagrams or pictures

    The Maintenance and Service Guide here should help. The Dv9930 is part of the dv9500/9600/9700 series.
    http://h10025.www1.hp.com/ewfrf/wc/manualCategory?cc=us&dlc=en&lang=en&lc=en&product=3647038&
    You may have to get an AC Adapter at third party site such as these. (No personal recommendations)
    http://www.topmicrousa.com/hp-pavilion-dv9930us--dv9933ca--dv9933cl-ac-adapter.html
    http://www.laptopbatteryonline.net/original-65w-hp-pavilion-dv9930us-dv9933-dv9933ca-ac-power-adapte...
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • Need help identifying model of a Treo

    I rarely need a PDA, so I didn't replace the old M105 that died.  A friend replaced a Treo she'd been using and gave it to me, but all I got was the device itself, the charger, and the USB cable.  I'm having trouble getting it to load my contacts and calendar (for some reason it did transfer four items in a ToDo list!), and I can't even figure out what model it is, let alone can I find a user's manual.  It is definitely just a PDA and not a phone.
    On the back of the Treo is the following identification:
    GMHED248700FX
    What is it?!  And what version of Palm software is required in order to get it to sync with the Palm software on my computer?  I thought at first it might be a model 700FX, but I can't find that model listed anywhere on the Palm site, so clearly that isn't it.  Is there any other way to identify it?
    Thank you for any help!
    Post relates to: None

    Thank you!  That certainly seems to be the one I have, and the age isn't important for what I need.  Now, though, that leads to the next issue, which is that I can't sync my contacts and calendar, although I think I've figured out why for myself.  Still, it generates another question.
    I am currently using Palm v 4.2.1 on my desktop (Mac 10.4.11)  I bet it's too new, isn't it?  Is it going to be possible for me to back off to Palm 4.0 without losing the information that's currently stored in 4.2.1?  I don't mind installing an older version of the software (and I found the download), but if it means losing my information, I'll just pass this free Treo on to some other unsuspecting person. 

  • Looking for a new laptop, need help!?!

    I am searching for a new laptop to use in college and i am planning to spend $900 to $1000 on it and would like a laptop that is not too big (like equal to or under 16".) I would like at least 500GB hard drive and processor that is good but not to strong that I have no battery life. I was thinking i5 processor.  I would like it to have enough battery to be able to use through good chunk of day (like 6hr rated or so.)  It needs to be somewhat durable as I know college will take its toll on the computer.  It would be great addition to have a good video card.  I don't know if there is anything out there like this but hope there is.  Please post suggestions or new ideas about what i would need for college.  Thank you for any help!
    Luke

    Hi Lukedmann,
    Thank you for considering Best Buy for the purchase of your next laptop. As we start off the Back to School season you should start seeing the introduction of quite a few new models,  and some that should be able to meet your need. With the way technology advances day to day, this shouldn't be impossible to maintain.
    Personally, taking into account any and all biases I have and stuff, theres 4 models i'd point out to you inside my store. Understanding that these are not your only options, and that I think that the aethetic design of the computer (how nice you think it looks) should definitely play a role, i'm sure any of these should be able to meet the demands you specified.
    3 Models to Compare
    Overall these are pretty close to your price limit, and I chose these assuming you wish to spend 900-1000 on the laptop and already counted in taxes, accessories, softwares etc. Just to let you know I discounted some models to give you the higher quality, however some models which come out to cost less would still meet your specified criteria. Let us know if you have any questions.
    Sincerely,
    Agent Lamar
    ========== If my post was helpful, please hit the Kudo button on the left hand side of my post. While i am an Best Buy/Geek Squad employee, my opinions are my own. Language is both mans greatest achievement and our biggest failures. Miscommunication is always my first assumption. ==========

  • Need help identifying my master socket for broadba...

    Hi i am awaiting my line to go active for broadband but i just want to make sure the socket i am going to use is my master socket.
    I can only find 1 socket in my house and it has a T logo in the bottom corner. This socket is on the bottom of my stairs (annoying place). I have opened it up and it looks like it has a capacitor on it. When i follow my wire coming out of the box it goes down a couple of steps and goes into another small box with a T logo on the front but all this has on it is a screw dot in the middle and another T logo. 
    So is the socket on stairs the master socket and if so what is this other box is it some sort of wiring centre?
    Solved!
    Go to Solution.

    Ahh right so it is my master socket but it must be older than the picture above as mine takes the whole face off and not just the bottom section and it does not have any test point on it.
    Would it be recommned to update my socket to a newer one? I ask this as i was looking into iplates to help boost my speed but there not conpatible with my current socket.
    And i need to put a extention into my living room is it best to just plug it into my master socket or will i lose speed this way?

  • Need help identifying the application responsible for an insert...

    Hi,
    I'm a MSSQL guy and Oracle is still a bit mysterious to me.  I'm looking for some assistance tracking down the application in an environment which is responsible for particular inserts.
    For example, suppose I have 10 different programs running and inserting values to a DB.  I need to know which one of them inserts a "0" in a particular column.
    I found a trigger which will tell me the user, unfortunately these programs use a shared credential so that doesn't help me.... here's what I've got:
    CREATE OR REPLACE TRIGGER check_for_zero_insert
    AFTER INSERT
      ON DATA_TABLE_0001
      FOR EACH ROW
    DECLARE
      v_username varchar2(10);
    BEGIN
      -- Find username of person performing the INSERT into the table
      SELECT user INTO v_username
      FROM dual;
      -- Insert record into audit table
      INSERT INTO audit_table
      ( samplevalue
      sampletime,
      username )
      VALUES
      ( :sampletime,
      :samplevalue
       v_username );
    END;
    But again, username won't help me, I need the originating process if at all possible (either an executable name, PID, or something to identify the specific application on the other side.)

    use this in your trigger
    select sys_context('USERENV','OS_USER') ||'-' ||user  into v_username from dual;
    You might need to increase the v_username data type length.
    Thanks,
    GPU

  • Need help identifying a font

    I've been asked to finalize this web site
    http://www.ru308.com/
    I want to make a clean version of the logo, without the
    grainy background.
    Can anyone help me identify the font used for the company
    name?
    RUSSELL INDUSTRIES, INC.
    Or suggest a good resource that can help me identify the
    font?
    Thanks in advance
    Steve
    Adobe Community Expert: Authorware, Flash Mobile and Devices
    http://www.magnoliamultimedia.com
    You need to go to MAX -
    http://adobemax2007.com/na/

    My Fonts - What the Font? A great resource!
    http://www.myfonts.com/WhatTheFont/
    --Nancy O.
    Alt-Web Design & Publishing
    www.alt-web.com
    "Steve Howard" <[email protected]> wrote in
    message
    news:f95ijg$7ra$[email protected]..
    > I've been asked to finalize this web site
    >
    >
    http://www.ru308.com/
    >
    > I want to make a clean version of the logo, without the
    grainy background.
    > Can anyone help me identify the font used for the
    company name?
    >
    > RUSSELL INDUSTRIES, INC.
    >
    >
    > Or suggest a good resource that can help me identify the
    font?
    >
    > Thanks in advance
    >
    > Steve
    >
    > --
    > Adobe Community Expert: Authorware, Flash Mobile and
    Devices
    >
    http://www.magnoliamultimedia.com
    >
    > You need to go to MAX -
    http://adobemax2007.com/na/
    >

  • Need help identifying problem (lockup/freezing in Warcraft III & CS)

    my macbook pro:
    Model Name: MacBook Pro 15"
    Model Identifier: MacBookPro1,1
    Processor Name: Intel Core Duo
    Processor Speed: 2 GHz
    Number Of Processors: 1
    Total Number Of Cores: 2
    L2 Cache (per processor): 2 MB
    Memory: 1 GB
    Bus Speed: 667 MHz
    Boot ROM Version: MBP11.0055.B08
    SMC Version: 1.2f10
    Serial Number: W862318KVWY
    Sudden Motion Sensor:
    State: Enabled
    It freezes and has black screens during games in which apple Q and force quit doesn't work. I would need to restart the comp. when it freezes the sound would stutter, repeating whatever the game had playing.
    things I tried but the macbook pro still froze:
    running the game off USB storage device(so i think HD is fine)
    wiping HD and reinstalling OS, updating everything and playing it on both USB and the installation of game (not 3rd party apps)
    opening the macbook pro and cleaning out the dust (didn't take anything out, just blew dust off)
    resetting RAM with apple options P R
    took RAM out and put it back in
    ran apple hardware test (everything was okay)
    running a different game (Counter-Strike on CrossOver and still froze)
    Disk Warrior 4 (only minor repairs and it froze in the test game after i ran DW4)
    booting system from an external and running the game from USB
    things to note:
    although sometimes when it freezes, the temperatures are really high - even with fan control (70-80C) but, i've reproduced the lock up with the temperatures at 60C, so i don't think its a heat problem (thermal paste and whatnot)
    sometimes in safari, quicktime, itunes, or just on desktop picture i would see a single, horizontal, 1 pixel-height distorted line running across the screen, which i can take screenshots of. no idea what's causing it but it could have some relation with the freezing/lockups
    some days it will run without problems for the entire day, just to see lockups the very next day. I think it could be random.
    help please..

    =\ no one....

Maybe you are looking for