OLE images are not getting transfered to the pdf format

After executing the oracle report file 6i and while sending the report file directly from the report screen to the microsoft outlook mail by clicking the mail option from the report, the OLE Images are NOT getting converted to the mail attachment. Rest of the data is getting converted fine.

hope this is not the correct forum to place this question.
if not, mention DB and OS versions and state your problem more clearly
mark answered post as helpful / correct*

Similar Messages

  • Images for tabs are not getting displayed in the page if Iam using a template

    I have page with a unstructured template. I have arranged tabs on page with images attached. But images are not getting displayed. why

    Hi,
    Please check if the images are in the server and in the /images alias path.
    thanks,
    Sharmila

  • I just noticed that some of the movies I had in iTunes did not get transferred to the iPhone. The missing movies are shown as generic movie icons in the iTunes panel. How do I get the original movies to show up again and transfer to the iPhone?

    I just noticed that some of the movies I had in iTunes did not get transferred to the iPhone 5. The missing movies are shown as generic movie icons in the iTunes panel and are checked to select them. But they do not show up in iPhone Videos. How do I get the original movies to show up again and transfer to the iPhone? I recently upgraded Mac OS to 10.6.8

    1. iTunes won't offer cloud downloads for songs that it "thinks" are in your library, even if it "knows" the files are missing. If you've exhaustively searched for the missing files and there is no prospect of repair by restoring to them to their original locations, or connecting to new ones, then delete that tracks that display both the missing exclamation mark and are of media kind Purchased/Protected AAC audio file. Don't hide from iTunes in the cloud when asked, close iTunes, then reopen. You can download from the cloud links or iTunes Store > Quicklinks > Purchased > Music > Not on this computer > All songs > Download all.
    2. Why? Not sure, perhaps 3rd party tools or accidental key presses combined with previously hidden warning messages when trying to organize the library. There is a hint that using the feature to downsample media as it is synced to a device may also be involved, though I've not replicated it. Whatever the reason a backup would protect your media.
    tt2

  • Whenever a record is Edited the rows are not getting displayed in the repor

    Hi all,
    When a new record is added or edited, It is physically getting added or edited according to the process, but those records are not getting displayed in the report..
    Please Any body faced this situation...
    Help me to identify what error i am doing........
    thanks in advance
    kavitha L

    Hi KChamarti,
    I am also trying to display images insid the datagrid but i get a weird broken image(all silver gray).
    My item renderer is:
              <mx:DataGridColumn headerText="Type">
                   <mx:itemRenderer>
                     <mx:Component>
                      <mx:HBox verticalGap="2">
                          <mx:Image id="dgImage" source="\assets\images\{toLowerCase(data.type)}.jpg" />
                          <mx:Label text="{data.type}"/>
                        </mx:HBox>
                     </mx:Component>
                   </mx:itemRenderer>
                </mx:DataGridColumn>
    Am i mentioning the source of the image in the right way?

  • Some images are not getting loaded

    I am online tutor. And today i got a problem . Images are not getting loaded and also many things are not getting loaded. But when i use internet explorer i don't have that problem . But i don wanna u internet explrer. Can any one help me. And the site with which i am facing problem is tutor.tutorvista.net

    Please try the instructions in this article: http://support.mozilla.com/en-US/kb/Images+or+animations+do+not+show
    Hope this helps. :)

  • Reg:tasks are not getting displayed in the uwl mss for particular user

    hi all
    Tasks are not getting updated in the MSS under tasks tab for particular user in EP.can any one please share their exp and knowledge on this how to reslove it.
    Thanks in advance.
    Deepika

    Hi Sateesh,
    This message will appear if either the background jobs are not scheduled, or UWL cannot tell that the background jobs are scheduled. The message no longer appears once you ensure the background jobs are scheduled to run via the user id UWL_SERVICE and that user is mapped to my portal user ID UWL_SERVICE.
    Kai

  • UWL : New tasks are not getting populated in the UWL

    Hi Experts,
        I<b> configured my uwl to my backend system , the completed tasks are getting populated in the UWL but the New tasks and in progress tasks are not getting populated in the UWL.(some thing strange).</b>
    When  i am trying to configure the universal  worklist system ,its givin me a caution message as  <b>System SHDCLNT012 does not support optimized delta pull</b> . where SHDCLNT012 is the system alias name.
    Is this the problem for not populating the new tasks in the UWL?
    Please provide me  the solution..
    Thanks & Regards,
    Sateesh

    Hi Sateesh,
    This message will appear if either the background jobs are not scheduled, or UWL cannot tell that the background jobs are scheduled. The message no longer appears once you ensure the background jobs are scheduled to run via the user id UWL_SERVICE and that user is mapped to my portal user ID UWL_SERVICE.
    Kai

  • Partner details are not getting captured to the purchase order from the ven

    Hi,
    Issue : ( ECC PO)
    Partner details are not getting captured to the purchase order from the vendor master.
    We found that the partners are not getting captured in ECC PO's automatically from the vendor master. We checked for all the config and everything seems to be o.k, but could not figure it out.
    Any suggestions are highly appreciated.
    Regards
    Sudhakar

    Hey Sudhakar,
    I believe what is happening here is that the ECC PO document type has not been assigned to the partner determination procedure.
    If this is working properly for standard POs, then,
    Go to Partner detrmination under Purchasing>  Partner Settings in Purchasing Documents> Assign Partner Schemas to Document Types.
    and enter teh appropriate document type and refer it to the procedure you have for NB Pos

  • How come the images are not getting displayed in ie?

    Hi,
    In my application i have a page where the thumbnails
    representing the videos uploaded into the site should be
    displayed.These imgaes are getting displayed in mozilla properly,
    but when it comes to ie 7 they are not getting displayed..instead
    iam getting a broken image.Please suggest me a solution.Thanks in
    advance.

    Hi KChamarti,
    I am also trying to display images insid the datagrid but i get a weird broken image(all silver gray).
    My item renderer is:
              <mx:DataGridColumn headerText="Type">
                   <mx:itemRenderer>
                     <mx:Component>
                      <mx:HBox verticalGap="2">
                          <mx:Image id="dgImage" source="\assets\images\{toLowerCase(data.type)}.jpg" />
                          <mx:Label text="{data.type}"/>
                        </mx:HBox>
                     </mx:Component>
                   </mx:itemRenderer>
                </mx:DataGridColumn>
    Am i mentioning the source of the image in the right way?

  • Portal Forms are not getting displayed in the new oracle environment.

    Hi All,
    The Forms in our Portal applications are not getting displayed after we have done the upgradation of Database in Unix from 8i to 9i. The reports are working fine.The forms that were added as portlets are not getting displayed and other forms that are called thorough links returns error when it is run. The Newly created forms are also not running but returns error. The Portal Version is 3.0.9.8.3. Pls help.
    Regards,
    Tom

    Hi ,
    Based on the requirement , check whether the customer contact has been done carried out for the invoice  , then possibility it must have gone out of the worklist , chekc whether the Invoice posted in the AR has been transferred to FSCM collection .

  • Buss.Area not getting transferred to invoice list

    Hi Gurus,
    hope u all r doin good outhere, i have an issue with bussiness area not getting populated or transferrred for Invoice list that are released to accounting .
    the scenario here is: in the accounting overview under the Billing Invoice(VF03) we are able to see the buss area against the customer acct line item and the GL acctline item, but when we go into the Accounting overview under Invoice List (VF23), the Buss area is not getting populated against the Customer lineitem..., we are not able to figure out what is missing...is it in the configuration...,
    we are on 4.6 , and we have an OSS note 69499 (given below) on this issue which says
    Summary
    Symptom
    Business areas are not transferred for invoice lists that are released to financial accounting.
    Additional key words
    GSBER TVTA VF21 SAPMV62S factoring discount
    Cause and prerequisites
    This was not programmed
    Solution
    A solution is only available in the standard system as of Release 3.0D.
    You can make the attached advance correction that uses a user exit.
    In this solution, the business area is copied from the sales area table (TVTA) for the sales area of the invoice list header. A business area determination on plant/division level (T134G) is not possible because the item information of the individual billing documents is no longer available in the invoice list.
    Source code corrections
    and we have contacted SAP , some one from SAP side told that the program is existing in that userexit already with our 4.6c,
    someone has suggested that in OB65 the check box is not activated against the comp code i use, but i have found that to be the check mark for the financial statements at the buss area level..will that make any diff to my issue... is it something with the FI part or SD part which do you think is incorrect ....any kind of suggestions pertaining to this issue .here would be helpful.
    some body please throw some light on it, i would be very much grateful.
    Thanks in advance
    Jay

    Hi Laxmipathi sir,
    as you said i went in the bussiness area account assignment and checked it and foound that the Sales area, distributin channel and division are assiogned to rule called 003 -Buss Area Det.from sales org/dist.channel item div.
    but there are other two.which were not assigned.
    001-buss area det.from plant/dividion(T134G)
    002-buss area det.from Sales area (TVTA).
    so do you think this is the reason it is not picking it up in the invoice list,
    i have discussed with one of the SD person here he said even though you don't assign them it shoudn't bother because the buss area is getting picked in invoice
    so could you please tell me what should i ask that person or what i have to tell them about this.
    thanks
    Jay

  • Components are not getting consumed at the time of GRN for Subcontracting P

    Dear All,
    I hav created a Subcontracting PO and transfered the componenets
    At the time of GRN for Finished Product, consumption of componets are not happening and GRN is getting posted
    Please help me

    Hello,
    Have you created the subcontracting Purchase order or not? check , Item category "L" was available in Purchase order not?
    I mean you are not getting the 543 movement type in MIGO transaction.
    Follow below steps for subcontracting
    Sub-contract business process: 
    You want to buy material from the supplier (processed material/ assembled item) , but for some reason (quality of certain item / price ) you will give some component to vendor . 
    Vendor shall process the item / use the item provided & supply the final item. 
    SAP process: 
    1.Create the finished goods material code. 
    2.Maintain the BOM for the material. 
    3.Create PO with item category as "L" . 
    4.Issue material to vendor with movement type 541 
    5.Receive the material against the PO with movement type 101. 
    6.MIRO to account for vendor's invoice for the service charge& material used by him. 
    Please check these steps are their in your PO or not?
    Regards
    Mahesh Naik.

  • Few keyfigures are not getting updated in the backup cube

    Hi,
    We run the daily backup process chain which extract data from planning
    area and store in the cube & ods.
    There are infopackages which update cube & ods, the datasource & info
    source is same for both ODS & backup cube.
    But a few keyfigures do not get updated in backup cube where as we see
    ODS getting updated for those keyfigures. Also there exist data in the
    planning area for these keyfigures.
    There is direct mapping between the keyfigures in cube & planning area.
    We tried to debug it and noticed that data gets updated in update routine table but not get updated in cube.
    There are total 25 keyfigures in the cube , out of this only 5 keyfigures are not getting updated.
    Need expert opinion on this.
    Regards,
    Chetana

    Hi Chetana,
    Check the backup step in your process chain. The Data Selection tab may have certain conditions on account of which certain keyfigures in your Backup Cube are not getting updated.
    Check if any ABAP routine or any selection conditions are maintained which are causing certain keyfigs to be excluded.
    ~Rishi

  • Chnages in the Graph properties are not getting reflected in the Browser.

    Hi,
    I have made some changes in the Graph properties in web template,
    Eg. : 1. change in color of a series for a columnar type graph
             2.change in the Text properties of Graph Series..
    When I save the template and try to run in the Browser, these changes are not getting reflected.
    Can anybody help me in this aspect ?
    Thanks.
    Regards.
    Amol Bade

    Same here :´(
    Thanks In Advance
    Juan

  • New changes are not getting reflected in the bam reports.

    Hi
    I have created a BPEL process and it polls the data from a table and populate an object created in Bam.I have accomplished the above task by createing two database adaptors.One is on 10g database and another one is on Bam database.I have created a view based on the bamobject and used a database adaptor to populate the data. BPEL process is populating the data properly to that bamobject but those changes are not reflecting to bam reports automaticaly. We need to refresh the report or reprompt the report to see the changes.Could some help me to reslove this issue.
    Thanks in advance
    Laj Abraham

    Hi charles
    I have tried that option too.But that is also not working. BPEL Procees is able to populate the BAM object with the help of the sensor.But those changes are not getting reflected in BAM Reports.But if i create or update an existing record in BAM object through BAM Architect, those changes are getting reflected in BAM Reports(No manual intervention is required).
    Your help in this regard is highly appreciated.
    Thanks
    Laj Abraham

Maybe you are looking for

  • Inserting a row in a schema-based xml type column

    i have problems while inserting a row in a schema-based xml type column it reports an error(schema and elemnt do not match) although they are matching if anyone can try it and if it worked plz send me the example

  • Why does my download of iTunes keep getting 'interrupted'?

    I keep trying and trying to download iTunes but its just not working! It comes up in my downloading bar, and then just says 'interrupted' each and every time and i have no idea why! I have an original Windows computer, and i'm using Google chrome, if

  • How to find classes in the package if package path

    in java i want to find classes,Interface,Exception names which are presant in the package.. for example java.sql; if i give this it should return class name Date Time DrivarManager pls helpme in this field

  • Web Dynpro ALV Lead Selection following filter

    Hi, How/Where can I set the lead selection on my ALV grid following the filter?  Thanks Samir

  • UseOneAsMany Function Not Working

    Hi Experts, I have tried the example from the below blog: **************** - Implementation of Node functions I have changed the context level as mentioned in the blog. I have changed the Plant Context Level to Mt_Sender for both MatNo and MatDesc wh