Olympus E30 camera raw files and OS X Leopard

Hi
I recently bought an Olympus E30. I've noticed that OS X (I'm using 10.5.7) can't display a preview of the .ORF file in the Finder.
Apple recently issued a Raw Compatibility Update for Aperture and iPhoto that included the E30. I don't use either, but thought that would also apply to OS X.
Software update installed a "iLife Support" update on my Mac on 5 June that I thought was the Raw Compatibility Update. So I don't understand why I can't display raw file previews.
Any ideas?

Solved the problem. Thanks for reading.

Similar Messages

  • Heavily Jagged Curves/Diagonals on Olympus EP-L1 RAW Files and possibly the whole PEN Family

    Hello everybody
    I have a serious situation here. My Olympus EP-L1 raw files have serious jagged diagonals. It's only visible on sharp curved surfaces. I ran some test on straight sharp diagonals from 45º to 0º but found no artifacts. Here is a comparison between in-camera jpeg and .ORF converted to DNG in Lightroom 3.3, ACR 6.3. BTW, this is visible on .ORF files as well as DNG. I took these photos with RAW+JPEG at full resolution, highest quality.
    Full thread and samples here
    Thanks

  • No changes appear when batch editing Camera Raw Files and saving as jpegs

    When I batch edit my raw files, including saving the file as a jpeg, from bridge or photoshop the resulting file saved never includes any changes I made in the Camera Raw editor. For example if I have lightened the photo by changing the exposure in Camera Raw as a saved jpeg after batching the file is still as dark as when originally shot. Is there some little box I forgot to check or something? Thanks!
    andy

    I've seen something like this, but have not figured out why yet. In my situation I select a group of images in Bridge and go to Tools / Photoshop / Image Processor.
    There I click the "open first image to apply settings" box.
    Save in Same Location
    Save as JPEG, resize to fit (1200 pixels), Convert Profile to sRGB.
    No Action selected
    Include ICC Profile
    Run it and in Camera Raw roll the saturation down to -100 (convert to b&W).
    Click "Open Image"
    The process runs and the first image is converted to b&w, but the others are not.
    John

  • Opening RAW files in Bridge - not recognized as "Camera RAW files"

    I would appreciate any help with this as I am frustrated after spending hours trying to figure this out:
    I use a Mac OS X laptop
    I have a Panasonic (DMC FZ8) camera that I've been taking RAW pictures with. I plug my camera into my computer and try and open the RAW files directly from the camera using Bridge (I have Photoshop CS2)..I have also tried copying the files to a folder on my desktop and opening from there. The problem is that Bridge doesn't recognize my .RAW files as actual "Camera RAW" files and the icons remain as the Preview icon and not actually a preview of the image. If I click on it to open it in Photoshop the "Photoshop RAW Options" come up set on 8 bits and when I open it, it's just a gray screen. I have checked the settings for RAW Camera and the Panasonic RAW files .raw is selected. I have also tried selecting "show only camera raw files" in my window that is open and my .RAW files that are there gray out - so the program isn't recognizing them.
    I just downloaded the Plug-in 3.7 Camera Raw and had to create folders for it in Application Support/Adobe/Plug-Ins/CS2/File Formats. the only folder I had was Application Support/Adobe so the rest I created.
    I'm now lost as to what I should do next. Nothing I try seems to be working.
    PLEASE HELP!

    >I plug my camera into my computer and try and open the RAW files directly from the camera
    Ouch! Ouch! Ouch!
    That is a monumentally bad idea. Transfer the closed files to your local hard drive first.
    This excerpt is from a long-gone post by the late, lamented author Bruce Fraser:
    Bruce Fraser - 4:17pm Jun 14, 04 PST (#5 of 21)
    Opening files directly from the camera is a bad idea for a variety of reasons*, and it most certainly isn't faster than using a FireWire or USB2 card reader.
             Drains the camera battery
             Runs the risk of the software you're using to open the images writing to the card and destroying the format
             Runs a small but significant risk of USB power frying the camera
             Slowest method known to mankind of getting images off a CF or SD card

  • Aperture 3.1.3 and Olympus E-PL2 RAW files

    Hi all;
    I'm using Aperture 3.1.3 on a mid-2010 MacBook Pro 2.66 GHz, 8 gig RAM. OS is OS X 10.7
    My new Olympus E-PL2 RAW files  (.ORF) do not seem to be compatible, despite Apple indicating that they are supported. The corresponding DNG files produce the same error message.  Whenever I try to export or use a plug-in, I get the following message:
    Editing Error
    This image cannot be renedered for editing
    because Aperture does not support the image format.
    Does anyone have any recommendations for fixing this issue?
    Thanks!!
    Tim

    Hi Tim,
    I'm running a similar configuration (hardware and camera) and I'm able to edit RAW in Aperture/Lion. Do you have all other s/w maintainance applied?
    Only problem I've seen since Lion is problems with images not on the MBP, in particular my NAS library is no inaccessible.

  • Problems with Lightroom 5.2 and Olympus EM-1 RAW files?

    There have been reports on DPREVIEW of color problems using Lightroom 5.2 with RAW files from the Olympus OM-D EM-1 camera.  This causes  difficulty creating camera profiles, and creates a red shift in Images.  JPG images are unaffected.
    Anyone else seeing this?
    When may we look forward to LR 5.3, hopefully with a fix?
    Thanks............... Jack Winberg

    The read me file from Adobe indicate that LR 5.2 has "preliminary" support for the Olympus EM-1 raw files.
    I would make sure you keep your original raw files so they can be converted when the support is finalized. i.e. I would not convert to dng on import if that is your normal workflow.

  • I upgraded my camera and opening a camera raw file no longer works

    I went from a Nikon D3000 to a Nikon D5200.  I have an old version of Elements (version 8) and I no longer can open a camera raw file.  I tried finding an answer in the support area but am not sure I found what I needed to know.  Since my camera is new and didn't exist at the time I purchased Elements does that mean that my old version doesn't support my camera?

    You need to buy PSE12 or Lightroom 5.
    Alternatively, download and install the free Adobe DNG converter to convert your raw files to the Adobe universal Raw format and the files will open in all versions of PSE (keep your originals as backups and for use in the camera manufactures software)
    Windows download (.exe file) click here DNG Converter 8.2
    Mac download (.dmg file) click here DNG Converter 8.2
    You can convert a whole folder of raw images in one click. See this quick video tutorial:
    You Tube click here for DNG Converter tutorial

  • Pls help. My Camera Raw, CS6 and Lightroom won't read the NEF files from D610.

    I recently upgraded to Nikon D610 and the NEF files were not readable from my old version of Camera Raw, CS6 and Lightroom. So downloaded the recommended upgrades and I now have Camera Raw 8.4.0.199; Lightroom 5.3; CS6 13.01. But still did not read my D610 NEF's. Please help. Thanks.

    oh wait, i got it. Just in case for those who will have the same scenario. I downloaded the NEF files from my D610 using the old ViewNX 2.1 software and that was the cause of incompatibility. So i upgraded my ViewNX to 2.9 and downloaded my images again. And it worked this time.

  • After reinstalling CS6 the bridge photo downloader isn't able to read raw files and fails to convert the raw files to DNG. Previously downloaded raw files, now DNG, open up successfully in Camera Raw 7. How do I get the photo downloader to read and conver

    After reinstalling CS6 the bridge photo downloader isn't able to read raw files and fails to convert the raw files to DNG. Previously downloaded raw files, now DNG, open up successfully in Camera Raw 7. How do I get the photo downloader to read and convert raw files. MacBook Pro with Snow Leopard. No such problem before this reinstallation.

    You should install Camera Raw 4.6.
    Visit this page and follow the instructions carefully:
    PC:    http://www.adobe.com/support/downloads/detail.jsp?ftpID=4040
    Mac:  http://www.adobe.com/support/downloads/detail.jsp?ftpID=4039
    -Noel

  • I have a Nikon d610 and am using PS CS6. I am unable to download my raw files through Bridge on my mac. I have downloaded the most recent Camera Raw files - 8.7.1 - what should I do next.

    I have a Nikon d610 and am using PS CS6. I am unable to download my raw files through Bridge on my mac. I have downloaded the most recent Camera Raw files - 8.7.1 - what should I do next.

    The D610 needs ACR 8.3 so you are easily covered there.  I am not entirely clear on the process you are using the bring the files onto your hard drive.  The safest way is to simply bring all the NEF files into a folder on your hard drive, then find them with bridge and open from there.
    If still stuck, open Photoshop, and go Help > About plugins > Camera RAW and check that 8.7 installed OK.

  • Why I cannot open camera raw files from camera Nikon 3200 through Adobe Bridge and/or Photoshop?

    Why I cannot open raw files (NEF) from camera Nikon D3200 through Adobe Bridge and/or Photoshop ?

    Thanks for the tip. It worked out perfectly.
    De: ssprengel [email protected]
    Enviada em: terça-feira, 14 de janeiro de 2014 19:14
    Para: Aecio Paes Leme
    Assunto: Why I cannot open camera raw files from camera Nikon 3200 through Adobe Bridge and/or Photoshop?
    Re: Why I cannot open camera raw files from camera Nikon 3200 through Adobe Bridge and/or Photoshop?
    created by ssprengel <http://forums.adobe.com/people/ssprengel>  in Adobe Camera Raw - View the full discussion <http://forums.adobe.com/message/6012775#6012775

  • New Nikon Df camera RAW files not recognized in Bridge and Photoshop.

    New Nikon Df camera RAW files not recognized in Bridge and Photoshop.  Is there a fix?  Surely Adobe make a mistake and not keep up with Nikon.

    I looked at the current list http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html and did not see the Nikon DF listed.
    Would post in ACR forum and see if they know anything more.  http://forums.adobe.com/community/cameraraw

  • I could not open my camera raw files from canon mark iii with my photoshop CS5. Tried to update Camera raw 6.7 but failed to install. Message said 'There was an error downloading this update. Please quit and try again later'. How could I open Raw files ?

    I could not open my camera raw files from canon mark iii with my photoshop CS5. Tried to update Camera raw 6.7 but failed to install. Message said 'There was an error downloading this update. Please quit and try again later'. How could I open Raw files ?

    Try installing it manually from:
    Adobe - Adobe Camera Raw and DNG Converter : For Windows : Camera Raw 6.7.1 Update
    Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Camera Raw 6.7.1 Update
    Regards,
    Ashutosh

  • I bought a canon EOS Rebel T5i. It came with photoshop elements 11.  PS won't open my C2 raw files and says my camera isn't supported by the software I have downloaded 7.4 dng converter and I still can't open the files.  What do I need to do?

    I bought a canon EOS Rebel T5i. It came with photoshop elements 11.  PS won't open my C2 raw files and says my camera isn't supported by the software I have downloaded 7.4 dng converter and I still can't open the files.  What do I need to do?

    You need camera raw 8.4 for your camera, if it’s Digital Rebel T5 EOS 1200D EOS Kiss X70. It is not compatible with PSE11; so it’s a bit odd if that software was bundled with the camera except that it will work with jpegs. I suggest you download and install the free Adobe DNG converter to convert your CR2 files to the Adobe universal Raw format and the DNG files will editable in PSE11(keep your originals as backups and for use in the camera manufactures software)
    Mac download (.dmg file) click here DNG Converter 8.4
    You can convert a whole folder of raw images in one click. See this quick video tutorial:
    You Tube click here for DNG Converter tutorial

  • Would like to purchase PSE 12 to process Camera Raw files for the following cameras: Nikon D800, Nikon DF, Canon G9 and Pentax K-3 does the Raw Converter that comes with  PSE 12 when purchased recognize  the cameras listed in the question or do I need to

    Would like to purchase PSE 12 to process Camera Raw files for the following cameras: Nikon D800, Nikon DF, Canon G9 and Pentax K-3 does the Raw Converter that comes with  PSE 12 when purchased recognize  the cameras listed in the question or do I need to download  the camera Raw Version 8.3 ?

    While the G9 RAW files can be read by Adobe Camera RAW and Lightroom, these file are unsupported at this time. Here is a link to Adobe's latest list of cameras that are supported and this list came out yesterday http://www.adobe.com/products/photoshop/cameraraw.html
    I have not done a comparison between Lightroom and Canon's software but others have and say that Canon's software is clearly better. I am sure when Adobe updates their software again to include the G9 it will be a very good RAW converter as it is will most other cameras.

Maybe you are looking for

  • Can't Open PDF After Upgrading to IE9

    I'm creating this to hopefully help others that are having this issue.  I typically issue Firefox, but had a website that only worked with IE.  When I recently upgraded to IE9, I and no longer could open PDF's from that site.  This feature was workin

  • How do you get the tools to show on the screen?

    I realize this may be a very basic question however I really need some help. I downloaded the free 30 day trial of Adobe Illustrator but when I open it there are no tools. There is no type, pen, or selection tools or anywhere for gradients. Does anyo

  • Nitro (Nalperion Service) patch - 7/8 [32,64]

    My T530 Windows 7 arrived with Nitro trial software, which I uninstalled from the Control Panel. Now Lenovo System Update shows critical update Nitro (Nalperion Service) patch - 7/8 [32,64]. Details: version 6.3.9.1, No previous version installed. I

  • MP4 files not playing in Quicktime 7.3

    Lately, I have been getting the following error when I try to play MP4 files in quicktime on my Mac: "The movie could not be opened. Operation could not be completed. (OSStatus error -50.)" This error also prevents me from adding the files to iTunes.

  • How do i make websites auto open when i open firefox

    i am trying to have 3 tabs auto open when i first open firefox , i had a friend try to set it up for me but now one of the tabs that auto opens it the "firefox add-ons" page. i want to remove it from the auto open list but i have no idea why, i would