OMB6- scrap material with 551 mvt type

dear experts
even though I put the cost center as optional for the movement type 551, in OMB6 and also on the program RM07CUFA.
When I do a MIGo and use 551 movement tyype the system is asking for a cost center as a mandatory entry, even though I put Gl acct in the acct assignment on MIGO.
Please let me know, how can I just scrap material without inputting cost center or a profit center.
Thank you
MSJ

You probably cannot, if you use profit center and cost center accounting, you may want to ask your FICO collegues for confirmation.
But in OKB9 you can setup a default cost center for this process.

Similar Messages

Auomatic TO creation and confirmation from PCN with 321 MVT type

Dear Friends,
I am facing following WM issue, Kindly go through it and reply me with your valuable solution.
In my plant QM is active, so while receiving goods against any Purchase Order (MVT TYPE 101), all my stock goes to quality. After UD check, 99% material move to unrestrictd stock (321 mvt.type) and 1% used for quality (331 mvt. type).
For an example if I have received 1000 kg material (which initially goes to quality), after UD 995 kg material come to unrestricted stock and 5 kg used for quality check.
In my existing system for material document with mvt. type 321, one PCN is generated in the background, and using LT05 we make TO from PCN and confirm it.
But is it posible to create the TO and confirm from the PCN (Mvt. 321) in the backgroung itself, i mean to say that while my QM user is doing UD, material document with mvt 321, one PCN and TO will be generated and TO will be confirmd in the background itself.
I don't want to use LT05 separetely to make TO from PCN.
Please reply me soon.

You need to make the config settings here in ur system.
SPRO > Logistics execution > WM > Interfaces > Inventory Management > Activate Automatic TO Creation
Assign the relevent setting to movement types...
Hope thsi helps
Thanks & regards
AHP

Restriction of goods reversal with 262 mvt type in MIGO

Hi,
During goods reversal using mvt type 262 with reference to a production order, we are able reverse any amt of qty, I want to restrict the reversal to the extent of other than confirmed qty.
Eg. Order qty 10 EA, GI done 10 EA (BOM 1:1), confirmed qty 5 EA. I should be able to reverse only 5 EA or less and not more, as 5 EA already consumed.
Regards,
Jagadeesh.

Jagadeesh,
This check can only be possible using user exit "EXIT_SAPMM07M_001" of Enhancement MBCF0002, you can write your logic in Include ZXMBCU02.
Regards,
Prasobh

Same material with some valuation type does not post accounting documeents

Hi Experts,
For a finished goods material has two valuation types and each assigned to a different valuation class.
For example Valuation type PLANT is with valuation class PROD, Valuation type EXTERNAL is with valuatioin class RESL.
When I post any material document, accounting document is getting created only for valuation type EXTERNAL.
The automatic account determination is configured properly with both valuation classes for Transaction event key BSX.
Also the simulation of the account determination (OMWB) is showing perfect and hitting the required accounts.
Where is the setting to control this? How to make the system to create an accounting document even if the material is received/issued with Valuation type PROD?
Thanks in advance.

Hi,
I checked up this scenario and is working alright. Acc docs are created for all the valuation types.
Here the issues are:
       1. Check the configuration and master data for valuations.
       2. System is not giving any error for any material document. It means that
           the transaction is clear. Check the price for val type PLANT is not zero.
regards,
sreenivas

Return to vendor with 122 Mvt Type

Hi,
I am working on Return to Vendor, which as per SAP documentation says will trigger 122 Mvt type. I have done Quality inspection and performed a "Return" using followup action. This changed the stock type to "R8".
I went to PRDI screen and in the follow-on function I selected "Return to Vendor". It showed up the R8 relevant quantities. On "POST" the system gave an error message "Inward del. completed indic. for item already set, change not possible." Checked queues in ECC and EWM, no entry available.
I searched various forums and came upon thread, wherein configure the "Determine quantity stock handling" where we can set closing indicator so that Inbound delivery can be open. Trying to figure where this setting available there in ERP.
I am not sure, if this is the root cause, if any other ideas please guide.
Karthik

Hi,
what is your scenario?
When you find defective quantity in the inbound receipt, do you use the process code to adjust the delivery quantity and the transferred delivery quantity?
Do you have subsequent delivery split configured for the remaining quantity?
When do you post GR? Is it before or after putaway? Basically system does not allow quantity adjustment if GR status is completed.
Petr

Scrap HU via HUMO - mvt type 551 doesn't req internal order

Hi there --
I want to require Internal Order (CO/PP order) on movement type 551 / scrap transactions. I made the CO/PP order a required entry via OMBW, and now when I process a 551 via MB1A, the internal order is required as expected. However, if I scrap a handling unit via HUMO (Edit > Change HU Posting > Other Postings > Pick for scrapping), the system does not require (or even allow) me to enter an internal order. I am able to save the transaction, and a 551 movement is processed without an internal order on the FI posting.
Any ideas on what's going on here and how I can ensure that the order number is required in HUMO for scrap txns???
Thanks!
Allison

I logged an OSS note with SAP about the inability to support the internal order number entry via the HUMO transaction.
They replied:
Unfortunately there is no standard possibility to make this field
available for any movements with HUMO (Main Program SAPLHUMO) in
standard. You only will reach your expectation with a modification in
the logic of the SAP Standard solution. Please check note 170183.
The customizing table MIGO_CUST_FIELDS, is where fields are set to
obligatory or optional. This table is specifically for setting fields obligatory or optional
when the movement is done through the transaction MIGO and other IM
transactions. The table description for MIGO_CUST_FIELDS as follow-
[MIGO: Field Selection per Movement Type]
Has anyone attempted this type of Mod?

Issue material to particular storage location with particular mvt type

Hi
I have a question about production order confirmation
If i enter the storage location in goods movement page automatically come for movement type
ex.
I want to issue the material to scrap location.if i enter material and storage location SCR movement type should come 531.
Is it possible ?
Pl guide me

531 movement type is used for receipt of By-products. So in your case if a particular item you want to receive in scrap location by the use of 531 then you have to define the item as by-product.
If you define the material as by-product then during production order confirmation at goods movement screen, the movement type will be automatically 531.
The main material (manufactured material) will be received using 101 and the by-product will be received by 531.
Please follow below steps to define the item as by-product:
- First change the BOM of the header material (the material which is manufactured) and enter the item with negative quantity.
- Run Re-read PP master data for the production order.
- Try confirmation.

Material with different Valuation types in WM Stock status

Hi
If we are maintaining stocks of different valuation types in a Plant , and the Storage Location in the Plant is Warehouse Managed, then how can we see the stocks in different valuation types in the Warehouse stock?
thanks
Raj

Hi Keerthan,
It will not be possible to change or add valuation type after the material movement is performed for the material. Only option is to create new materials.
In case if the materials are not involved in any material movement, then you can change valuation type. Best thing will be executing via LSMW.
Regards
Terence

Missing parts not checking for 101 mvt. type

Dear SCN's,
I have configured missing parts and also assigned MRP controller and availability check in material master. And in movement type 101 wrt PO 'B', I have assigned checking rule but still system is not checking while posting GRN. Please suggest where I went wrong.
Regards,
Kumar

Dear Jurgen,
Please check the attached document and guide were I went wrong.
Then I did testing, first I created reservation against the material with 201 mvt. type and then created PO and then did GRN but Im not getting any message as described. Please check.
Regards,
Kumar

Handling Scrap Material

Hi Experts,
Required your interference here, How to handle scrap material ? Does Any material type use specifally for scrap material ?
Weather Qty and Value updation is allowed for scrap material ?
For any existing material can we transfer Trading material to scrap material by using Mvt type 309 ? What effects it will happen on Trading material type ?
Please suggest briefly.
Best Regards
Javeed Ahamed

Hi,
Required your interference here, How to handle scrap material ? Does Any material type use specifally for scrap material ?
Weather Qty and Value updation is allowed for scrap material ?
Solution: If you want you can create new material type for scrap, for quty & value updation it is upto your business requirement if you want to inventory management that scrap then tick that quantity update, if you want to valuate the scrap material then tick value updating.
For any existing material can we transfer Trading material to scrap material by using Mvt type 309 ? What effects it will happen on Trading material type ?
Solution: You can transfer but the valuation of the material of the you have to take care, like trading material price will be difference & scrap material will be different that different amount you have to post to other account which be considered for balancing the account.
Regards
Ravi Shankar.

Storage location is not updated after posting GR with Mvt type 107(Valuated GR blocked stock)

Hi experts,
Before posting GR through Movement type 107 (valuated GR blocked stock) we can see the storage location field in MIGO screen and able to enter value into this field. But after posting GR when we retrieve the material document we are finding that the field (storage location) is blank, i.e. it's not updated at all. When we check the stock in MMBE we find that no quantity is updated for valuated GR blocked stock.
We want the storage location to be updated while posting GR with 107 Mvt type.
Any idea Please?
Points assured.
Thanks
Amitava

SAP describes it in help.sap.com: Since the material is not to be added to the inventory yet, do not enter a storage location.
If you require a storage location, then I assume that your design does not match with the design of SAP, you are using a function to solve a gap which is not foreseen by SAP for this case.
Especially the 107 is usually representing stock which is still in transfer but you are already the legal owner and have to show the value of those goods in your books.

CVD not capturing in GRN(101 mvt type) with reference to STO

Hi Experts,
This regarding the CVD not capturing at the time of 101 movement against STO.
My scenerio is as follows.
I am importing some materials. Import PO will be based on a pricing schema where no CVD or customs duties are maintained. Against that Import PO GRN (101mvt type) will takes place at Port plant(Maintained Port as a plant). Now STO will be done from the manufacturing plant setting port plant as the supplying plant.This STO also based on the pricing schema where the Customs duties as well as the CVD s are maintained. Miro for the BCD & CVD will be done based on this STO and then MB1B with 351 mvt type will be done .Then by analysing financial documents having the CVD and BCD entries will be generated at the time 351 mvt type. Then GRN (101)at the Manufacturing plant against STO will be done. But in the Excise duty field the CVD values are not capturing.
Why CVD values are not capturing? Is it a std SAP functionality? If so please explain the logic.
If not please guide me why it is not capturing.
If Only at the time of 351 these excise invoice will be generated. How can I track the Invoice because during mb1b I am not supposed to put any vendor excise invoice number.
Please analyse this scenerio and guide me with your experience in this Ocean.
It will be helpful for me to tackle this issue raised by a client if you put some significant threads on this.
Thanks & Regards
Prabhul

Dear
It is not possible in standard SAP. use the MB_DOCUMENT_BADI.
To get the order components use the COXT_BAPI_GET_DETAIL.
Now while doing goods issue using transaction code MB1A and MIGO system has to do the check:
If Quantity of issue in goods issue screen + Quantity withdrawn <= Requirement quantity then allow the transaction else throw an error u201CGoods Issue not possible for Requirement quantityu201D

BAPI_GOODSMVT_CREATE used with mvt type 105

Hi,
That is easy.
Somebody has worked with the mvt type 105* and the BAPI_GOODSMVT_CREATE in the same development?
Release GR blocked stock for warehouse
I am trying to use this combination but it does not work.
Thanks in advance.

The message is:
M7 036 - No goods receipt possible for purchase order 4500001156 00000
Let me explain my process.
The users creates a goods receipt with mvt type 103 (blocked) and, in another moment, they will make a mvt type 105 (release). I am trying to convert it to an automatic process using a BAPI for this, but it does not work.
That is my problem,
Thanks in advance.

Add New field in OMJJ for MB1B mvt type: 303

Hello Experts,
I need your help in resolving an issue:
I am tring to add a Field: "LFSNR" in OMJJ for Tcode: MB1B and Movement type: 303. but i am getting the error: "Field LFSNR is not
allowed for transaction type 303" as this field doesnt exist in table: T156B / MIGO_CUST_FIELDS.
Please help me with your thoughts as how can i add a new field to T156B / MIGO_CUST_FIELDS and then in OMJJ for 303 mvt type.
We are on ECC 6 EHp4.
regards
Venkat

Hi Venkat,
You may check this first: Re: Scrap HU via HUMO - mvt type 551 doesn't req internal order
Thanks,
Gordon

Inspection Lot not creating for 657 mvt type

Hello,
I am unable to create inspection lot for customer returns. Mvt type used by SD module for customer return is 657 ( to blocked stock). While sales to return order with this mvt type, no inspection lot is getting generated.
But when returns are done with 651 mvt type (Returns to QI), I am able to create inspection lots.
Can anyone tell me how to activate inspection for 657 mvt type as I want this stock to go directly to Blocked stock.
Thanks in advance.
Jason

Dear,
Quality inspection stock (movement type is 655)
Blocked stock (movement type 657)
If the given quantity is posted to blocked stock returns first, you can make a manual goods movement posting in the Inventory Management component to transfer the quantity to valuated stock.
Tcode vov6 - there will be schedule line category DN.
go to details of DN.In Business data,check which movement type is assigned here change it to 655 and try.
Also go to material master, select "Quality Management" view and execute. There click on "Insp.setup" and press "F5". Assign "06" under tbe tab "Inse.Type" and save.
Now if that material returns from any customer, the stock will be blocked for quallity clearance. Only quality people can give clearance for that material.
Regards,
R.Brahmankar

OMB6- scrap material with 551 mvt type

Similar Messages

Maybe you are looking for