OMS patch post-install procedures fail
Hello,
It might be a long shot, but I have to ask for suggestions:
Doing PSU7 upgrade on the OMS server (11.1 EMGControl) , the last step (after OPatch apply) is to have "apply.sql" run:
$ORACLE_HOME/bin/rcuJDBCEngine [email protected]:1521:GRIDREPO JDBC_SCRIPT apply.sql $PWD $ORACLE_HOME
Please enter database password:
A SQL Error occurred!Unable to connect to the database using the provided details.
Please enter a valid hostname and port or check if the listener is up and running.[oracle@mn17 13711705]$ export ORACLE_HOME=/opt/oracle/11g/product/11.2.0/db_1
I attempted dozen times setting the environment - ORACLE_HOME to OMS_HOME and all PATHs, server name , db name, etc - to no avail.
Found a note on MOS that specifies a culprit such a cursor_ parameter, but related to 10.x ...
So far no progress-> even uninstall is not possible as same story repeats - the rollback script fails the same way...
THx,
Hello,
It might be a long shot, but I have to ask for suggestions:
Doing PSU7 upgrade on the OMS server (11.1 EMGControl) , the last step (after OPatch apply) is to have "apply.sql" run:
$ORACLE_HOME/bin/rcuJDBCEngine [email protected]:1521:GRIDREPO JDBC_SCRIPT apply.sql $PWD $ORACLE_HOME
Please enter database password:
A SQL Error occurred!Unable to connect to the database using the provided details.
Please enter a valid hostname and port or check if the listener is up and running.[oracle@mn17 13711705]$ export ORACLE_HOME=/opt/oracle/11g/product/11.2.0/db_1
I attempted dozen times setting the environment - ORACLE_HOME to OMS_HOME and all PATHs, server name , db name, etc - to no avail.
Found a note on MOS that specifies a culprit such a cursor_ parameter, but related to 10.x ...
So far no progress-> even uninstall is not possible as same story repeats - the rollback script fails the same way...
THx,
Similar Messages
-
Post install checks failed for DBC file - Oracle App11.5.10.2 Linux 5.3
Hi everybody,
I tried Installing Oracle E-Business Suite 11.5.10.2 on Red Hat Enterprise Linux Server release 5.3
The Post install checks failed for DBC file, HTTP, JSP and PHP. Apparently the DBC hadn’t been created. I had verified the log file, while executing adgendbc.sh, it throwing below error.
Generating /jith/d01/oracle/appl/visappl/fnd/11.5.0/secure/prithvi.bangalore.bedford.local_vis.dbc
DBC generation failed with exit code 127
Generating /jith/d01/oracle/appl/visappl/fnd/11.5.0/secure/prithvi_vis.dbc
DBC generation failed with exit code 127
Updating Server Security Authentication
Updating Server Security Authentication failed with exit code 127
adgendbc.sh exiting with status 127
ERRORCODE = 127 ERRORCODE_END
.end std out.
touch: error while loading shared libraries: librt.so.1: cannot open shared object file: No such file or directory
sqlplus: error while loading shared libraries: libdl.so.2: cannot open shared object file: No such file or directory
mkdir: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
grep: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
sed: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
/jith/d01/oracle/appl/viscomn/util/java/1.4/j2sdk1.4.2_04/bin/java: error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory
cp: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
/jith/d01/oracle/appl/viscomn/util/java/1.4/j2sdk1.4.2_04/bin/java: error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory
cp: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
/jith/d01/oracle/appl/viscomn/util/java/1.4/j2sdk1.4.2_04/bin/java: error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory
cp: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
/jith/d01/oracle/appl/viscomn/util/java/1.4/j2sdk1.4.2_04/bin/java: error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory
/jith/d01/oracle/appl/viscomn/util/java/1.4/j2sdk1.4.2_04/bin/java: error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory
.end err out.
Thanks in advance.
sreejithWelcome to the forums !
Pl post EBS related question in the EBS forums at http://forums.oracle.com/forums/category.jspa?categoryID=3
HTH
Srini -
Issue with reinstallation of WSUS, Post install config fails
Hi
I am trying to reinstall WSUS role. Steps followed
1. Uninstallation of WSUS role and windows internal database, restarted the machine
2. Delete the Data file from Windows\WID folder
3. Deleted the update service registry form registries
4. Deleted WSUS administration site for IIS.
5. Deleted the files from Program files\update services.( Retained WSUSutil in sub folder tools as this was not coming up with installation).
6. Restarted the machine.
7. Installed WSUS - Successful.
8. Tried to run the post install configuration from console.. It errored out.
9. Executed the command "wsusutil postinstall CONTENT_DIR=<<Folder path on WSUS server>>
10. It erred out and the content of the error log is as below.
2015-02-03 23:06:07 Starting service W3SVC
2015-02-03 23:06:07 Configuring IIS...
2015-02-03 23:06:07 Start: ConfigureWebsite
2015-02-03 23:06:07 Configuring website on port 8530
2015-02-03 23:06:08 System.ComponentModel.Win32Exception (0x80004005): The system cannot find the file specified
at System.Diagnostics.Process.StartWithShellExecuteEx(ProcessStartInfo startInfo)
at System.Diagnostics.Process.Start(ProcessStartInfo startInfo)
at Microsoft.UpdateServices.Administration.UseCustomWebSite.ExecuteIisCustomAction(String arguments)
at Microsoft.UpdateServices.Administration.UseCustomWebSite.Install(Int32 portNumber)
at Microsoft.UpdateServices.Administration.UseCustomWebSite.InstallAndConfigure(IisConfiguration& iisConfiguration, Int32 newPortNumber)
at Microsoft.UpdateServices.Administration.PostInstall.ConfigureWebsite(Int32 portNumber)
at Microsoft.UpdateServices.Administration.PostInstall.Run()
at Microsoft.UpdateServices.Administration.PostInstall.Execute(String[] arguments)
Any pointers on how to resolve this issue would be of great help. I can not uninstall IIS on this server as this is acting as only distribution point for my SCCM Setup.
Regards
LeelaHi ,
Refer to below steps for clean uninstallation of WSUS.
Workaround 1: To uninstall WSUS roles and features using Windows PowerShell
In PowerShell, review features installed by calling: Get-WindowsFeature UpdateServices*
To remove features, call: Uninstall-WindowsFeature <featureName>
Workaround 2: To uninstall WSUS roles and features using the Server Manager Console
In Server Manager, launch Remove Roles and Features Wizard (RRW), unselect items to be uninstalled, and complete the Wizard:
In Server Roles tab unselect ‘Windows Server Update Services’ option
In Features tab unselect ‘Remote Server Administration Tools -> Role Administration Tools -> Windows Server Update Services Tools’ option
We recommend restarting the server to ensure that all WSUS components are removed. After uninstalling WSUS roles and features, you may reinstall the WSUS roles and features
And try to reinstall. It worked for me.
Regards,
Arjun -
OMS Patch 17513525 install problem
Since yesterday there is a Patch for OMS available. I'm trying to install it, but I keep getting the same problem.
I have configured my ORACLE_HOME and PATH according to README:
[oracle@oemcc12 17513525]$ echo $PATH
/usr/sbin:/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin:/home/oracle/bin:/u01/app/oracle/Middleware12cR3/oms/bin:/u01/app/oracle/Middleware12cR3/oms/OPatch:/tmp/ded/
[oracle@oemcc12 17513525]$ echo $ORACLE_HOME
/u01/app/oracle/Middleware12cR3/oms/
opatchauto apply -analyze says that everything is OK, but during the apply I get following:
To complete the session, please execute the following step(s):
[Jan 16, 2014 9:38:38 AM] Step 1. On host oemcc12.vm.net run below command(s) as user "oracle":
/u01/app/oracle/Middleware12cR3/oms/OPatch/opatchauto checkApplicable -ph /tmp/ded/17513525 -oh /u01/app/oracle/Middleware12cR3/oms -invPtrLoc /u01/app/oracle/Middleware12cR3/oms/oraInst.loc
Step 2. On host oemcc12.vm.net run below command(s) as user "oracle":
NOTE: Please replace %EM_REPOS_PASSWORD% with credential for OMS repository SYSMAN user.
/u01/app/oracle/Middleware12cR3/oms/bin/emctl register oms metadata -service swlib -debug -file /u01/app/oracle/Middleware12cR3/oms/sysman/metadata/swlib/multioms -core -sysman_pwd xxxxxx
Step 3. On host oemcc12.vm.net run below command(s) as user "oracle":
NOTE: Please replace %EM_REPOS_PASSWORD% with credential for OMS repository SYSMAN user.
/u01/app/oracle/Middleware12cR3/oms/bin/emctl register oms metadata -service procedures -debug -file /u01/app/oracle/Middleware12cR3/oms/sysman/metadata/procedures/linuxpatch/PatchLinux.xml -core -sysman_pwd xxxx
Step 4. On host oemcc12.vm.net run below command(s) as user "oracle":
/u01/app/oracle/Middleware12cR3/oms/OPatch/opatchauto commit -id 17513525 -oh /u01/app/oracle/Middleware12cR3/oms -invPtrLoc /u01/app/oracle/Middleware12cR3/oms/oraInst.loc
To continue, OPatch will do the following: [Patch and deploy patch(es) binaries] : Apply patch(es) [ 17513525 ] to Oracle Home "/u01/app/oracle/Middleware12cR3/oms"; Apply RCU artifact with patch "/u01/app/oracle/Middleware12cR3/oms/.patch_storage/17513525_Jan_13_2014_07_45_01/original_patch"; Register MRS artifact "swlib"; Register MRS artifact "procedures" Do you want to proceed? [y|n] y User Responded with: Y Applying patch "17513525" to Oracle Home "/u01/app/oracle/Middleware12cR3/oms"... Please monitor OPatch log file: /u01/app/oracle/Middleware12cR3/oms/cfgtoollogs/opatch/17513525_Jan_16_2014_09_33_25/apply2014-01-16_09-35-04AM_11.log Updating repository with RCU reference file "/u01/app/oracle/Middleware12cR3/oms/.patch_storage/17513525_Jan_13_2014_07_45_01/original_patch" Registering service "swlib" with register file "/u01/app/oracle/Middleware12cR3/oms/sysman/metadata/swlib/multioms"... Some error occurred during update MRS action. Please refer individual log file(s) for details. Log file location: /u01/app/oracle/Middleware12cR3/oms/cfgtoollogs/opatch/2014-01-16_09-33-24AM_SystemPatch_17513525_1/emctl_register_swlib_2014-01-16_09-38-33AM.log To complete the session, please execute the following step(s): Step 1. On host oemcc12.vm.net run below command(s) as user "oracle": /u01/app/oracle/Middleware12cR3/oms/OPatch/opatchauto checkApplicable -ph /tmp/ded/17513525 -oh /u01/app/oracle/Middleware12cR3/oms -invPtrLoc /u01/app/oracle/Middleware12cR3/oms/oraInst.loc Step 2. On host oemcc12.vm.net run below command(s) as user "oracle": NOTE: Please replace %EM_REPOS_PASSWORD% with credential for OMS repository SYSMAN user. /u01/app/oracle/Middleware12cR3/oms/bin/emctl register oms metadata -service swlib -debug -file /u01/app/oracle/Middleware12cR3/oms/sysman/metadata/swlib/multioms -core -sysman_pwd %EM_REPOS_PASSWORD% Step 3. On host oemcc12.vm.net run below command(s) as user "oracle": NOTE: Please replace %EM_REPOS_PASSWORD% with credential for OMS repository SYSMAN user. /u01/app/oracle/Middleware12cR3/oms/bin/emctl register oms metadata -service procedures -debug -file /u01/app/oracle/Middleware12cR3/oms/sysman/metadata/procedures/linuxpatch/PatchLinux.xml -core -sysman_pwd %EM_REPOS_PASSWORD%
Step 4. On host oemcc12.vm.net run below command(s) as user "oracle":
/u01/app/oracle/Middleware12cR3/oms/OPatch/opatchauto commit -id 17513525 -oh /u01/app/oracle/Middleware12cR3/oms -invPtrLoc /u01/app/oracle/Middleware12cR3/oms/oraInst.loc
Copying all logs to: /u01/app/oracle/Middleware12cR3/oms/cfgtoollogs/opatch/2014-01-16_09-33-24AM_SystemPatch_17513525_1
Patching summary:
Following patch(es) are successfully applied (Oracle home:patch list):
/u01/app/oracle/Middleware12cR3/oms:17513525
[ Error during Patch and deploy patch(es) binaries Phase]. Detail: Some error occurs during deploying the MRS artifact for service "{0}".
opatchauto failed: opatchauto failed to execute some of the OMS operations. Please refer log file(s) for details.
Log file location: /u01/app/oracle/Middleware12cR3/oms/cfgtoollogs/opatchauto/17513525/opatch_oms_2014-01-16_09-33-29AM_deploy.log
Recommended actions: Please check the opatch, opatchauto, artifact log files for the failed MRS artifact action(s) and contact Oracle Support with the logs.
opatchauto failed with error code 244
[oracle@oemcc12 17513525]$ emctl start oms
Oracle Enterprise Manager Cloud Control 12c Release 3
Copyright (c) 1996, 2013 Oracle Corporation. All rights reserved.
Starting Oracle Management Server...
Starting WebTier...
WebTier Successfully Started
Oracle Management Server is Down. PBS and Console both may not be up.
After that I can not start my OMS.
Rollbacking with opatchauto rollback -id xxxx doesnt work. I had to rollback it with opatch rollback -id xxxx. After that I'm able to start the OMS.
By execution off some steps I also get an error:
[oracle@oemcc12 ~]$ /u01/app/oracle/Middleware12cR3/oms/bin/emctl register oms metadata -service swlib -debug -file /u01/app/oracle/Middleware12cR3/oms/sysman/metadata/swlib/multioms -core -sysman_pwd xxxxxx
Oracle Enterprise Manager Cloud Control 12c Release 3
Copyright (c) 1996, 2013 Oracle Corporation. All rights reserved.
Starting output for debug mode.
Debug logs will be written to /u01/app/oracle/Middleware12cR3/em/EMGC_OMS1/sysman/log/emctl.log
Exception in thread "main" java.lang.NoClassDefFoundError: oracle/as/jmx/framework/PortableMBeanFactory
at oracle.sysman.emctl.util.EmctlUtil.getReposConnUsingAdminServer(EmctlUtil.java:777)
at oracle.sysman.emctl.util.EmctlUtil.getReposConn(EmctlUtil.java:719)
at oracle.sysman.emctl.extensibility.EmctlMdsUtil.getReposConnection(EmctlMdsUtil.java:69)
at oracle.sysman.emctl.extensibility.EmctlMetadataService.main(EmctlMetadataService.java:152)
Caused by: java.lang.ClassNotFoundException: oracle.as.jmx.framework.PortableMBeanFactory
at java.net.URLClassLoader$1.run(URLClassLoader.java:202)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:301)
at java.lang.ClassLoader.loadClass(ClassLoader.java:247)
... 4 more
[oracle@oemcc12 ~]$ /u01/app/oracle/Middleware12cR3/oms/bin/emctl register oms metadata -service procedures -debug -file /u01/app/oracle/Middleware12cR3/oms/sysman/metadata/procedures/linuxpatch/PatchLinux.xml -core -sysman_pwd xxxxxxx
Oracle Enterprise Manager Cloud Control 12c Release 3
Copyright (c) 1996, 2013 Oracle Corporation. All rights reserved.
Starting output for debug mode.
Debug logs will be written to /u01/app/oracle/Middleware12cR3/em/EMGC_OMS1/sysman/log/emctl.log
Exception in thread "main" java.lang.NoClassDefFoundError: oracle/as/jmx/framework/PortableMBeanFactory
at oracle.sysman.emctl.util.EmctlUtil.getReposConnUsingAdminServer(EmctlUtil.java:777)
at oracle.sysman.emctl.util.EmctlUtil.getReposConn(EmctlUtil.java:719)
at oracle.sysman.emctl.extensibility.EmctlMdsUtil.getReposConnection(EmctlMdsUtil.java:69)
at oracle.sysman.emctl.extensibility.EmctlMetadataService.main(EmctlMetadataService.java:152)
Caused by: java.lang.ClassNotFoundException: oracle.as.jmx.framework.PortableMBeanFactory
at java.net.URLClassLoader$1.run(URLClassLoader.java:202)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:301)
at java.lang.ClassLoader.loadClass(ClassLoader.java:247)
... 4 more
Is there someone else, having the same problem...
What could be the solution?Hi, in the meantime i have updated my db version to 11.2.0.4.
Now I have this:
[oracle@oemcc12 OPatch]$ ./opatch version
OPatch Version: 11.1.0.10.2
[oracle@oemcc12 OPatch]$ ./opatch lsinv
OPatch Version : 11.1.0.10.2
OUI Version : 11.2.0.4.0
The OPatch version is not applicable for current OUI version.
Since OUI Version starts with 11.2, Please go to 'My Oracle Support' and get right OPatch 11.2.*.*.* based on patch 6880880, release version 11.2.0.0.0 and appropriate platform.
OPatch succeeded.
After installing the latest version of Opatch I can not use the opatchauto option:
[oracle@oemcc12 OPatch]$ ls -l
total 140
drwxr-xr-x 3 oracle oinstall 4096 Dec 13 21:53 crs
drwxr-xr-x 2 oracle oinstall 4096 Dec 13 21:53 docs
-rwxr-xr-x 1 oracle oinstall 23695 Dec 13 21:53 emdpatch.pl
drwxr-xr-x 3 oracle oinstall 4096 Dec 13 21:53 jlib
drwxr-xr-x 4 oracle oinstall 4096 Dec 13 21:53 ocm
-rwx--x--- 1 oracle oinstall 31493 Dec 13 21:53 opatch
-rwxr-xr-x 1 oracle oinstall 19867 Dec 13 21:53 opatch.bat
-rwxr-xr-x 1 oracle oinstall 10056 Dec 13 21:53 opatchdiag
-rwxr-xr-x 1 oracle oinstall 9352 Dec 13 21:53 opatchdiag.bat
-rwxr-xr-x 1 oracle oinstall 49 Dec 13 21:53 opatch.ini
-rwxr-xr-x 1 oracle oinstall 2576 Dec 13 21:53 opatch.pl
drwxr-xr-x 4 oracle oinstall 4096 Dec 13 21:53 opatchprereqs
drwxr-xr-x 3 oracle oinstall 4096 Dec 13 21:53 oplan
-rw-rw-r-- 1 oracle oinstall 3064 Dec 17 21:38 README.txt
-rw-r----- 1 oracle oinstall 26 Dec 13 21:53 version.txt
According to readme:
https://updates.oracle.com/Orion/Services/download?type=readme&aru=17010886#BABHIABC
2 Prerequisites
Ensure that you have the latest version of OPatch 11.1 on all OMS instance platform homes. (this should be updated)
autopatching with this versions of Opatch(11.1) and OUI(11.2.0.4) is not possible. Is there any other way to this? Do I also need to update the Opatch to 11.2?
In that case it's only possible to patch with "usual" opatch command.
To be honest, I'm not willing to experiment, since last time i lost a lot of time trying to figure this out, specially when I had a problem, that my oms can't start after patching.
Uploading the log file is not relevant now, because I'm now using different OUI and DB Version.
Regards! -
SAP EHP1 for Solution Manager 7.0 - Post Install Procedure
Hello Folks:
I completed Sol Manager 7.0 EHP1 installation on Win 2008 R2 with MS SQL in a sandbox environment. This is the first time I ever installed SAP on my own and i am in the process of performing post installation steps from Installation Guide.
In the install guide, there is no mention of creating a new client ex: 100. Could you please, provide a list of tasks that generally needed to perform after the installation is completed and before doing any configuration in Solution manager.
I have some very basic idea on the Basis but while going thru Installation Guide I am not sure if there any steps that generally need to perform to complete the installation. My goal is to complete the Sol Mgr installation first and then start preparing for ECC 6.0 Installation.
Thanks a lot in Advance.Hi,
First - the basic post installation steps are:
1. sick t-code need to execute
2. se06 --> Perform Post-Installation Actions
3. RZ10 --> Utilities --> Import profiles --> Of active servers
4. execute sgen T-code --> This will take some time
5. setup STMS
6. create client (If custom required)
7. Take backup of the system
For the solution manager client you could use the default created '001' client.
Next you need to run the solman_setup template which 'sets up' the SolMan for usage.
Follow config guide at: https://service.sap.com/~sapidb/011000358700000308502009E.PDF
For installing the ECC system, only a install key(from SMSY) is to be generated from SolMan. But if you want to use the SolMan effectively, suggest you to run the entire solman_setup.
Regards,
Srikishan -
SCEP Post-install update fails
Hi,
I have SCCM 2012 R2 running in a secure environment - Internet access is tightly controlled. I'm presently replacing my SEP clients with SCEP, and my Antimalware policy is set to point to WSUS for updates.
SCEP will not update automatically during installation, however - even though it is "pointed" to WSUS, WindowsUpdate.log indicates the following:
2014-07-28 14:17:06:348
3280 2ac
Misc = Process: c:\Program Files\Microsoft Security Client\MpCmdRun.exe
2014-07-28 14:17:06:348
3280 2ac
Misc = Module: C:\Windows\system32\wuapi.dll
2014-07-28 14:17:06:348
3280 2ac
COMAPI -------------
2014-07-28 14:17:06:348
3280 2ac
COMAPI -- START -- COMAPI: Search [ClientId = System Center Endpoint Protection (DDEFDD14-250E-4DC8-A0B3-9D667EC5D8EB)]
2014-07-28 14:17:06:348
3280 2ac
COMAPI ---------
2014-07-28 14:17:06:348
840 75c
Agent *************
2014-07-28 14:17:06:348
3280 2ac
COMAPI <<-- SUBMITTED -- COMAPI: Search [ClientId = System Center Endpoint Protection (DDEFDD14-250E-4DC8-A0B3-9D667EC5D8EB)]
2014-07-28 14:17:06:348
840 75c
Agent ** START ** Agent: Finding updates [CallerId = System Center Endpoint Protection (DDEFDD14-250E-4DC8-A0B3-9D667EC5D8EB)]
2014-07-28 14:17:06:348
840 75c
Agent *********
2014-07-28 14:17:06:348
840 75c
Agent * Online = Yes; Ignore download priority = No
2014-07-28 14:17:06:348
840 75c
Agent * Criteria = "(IsInstalled = 0 and IsHidden = 0 and CategoryIDs contains 'a38c835c-2950-4e87-86cc-6911a52c34a3' and CategoryIDs contains 'e0789628-ce08-4437-be74-2495b842f43b')"
2014-07-28 14:17:06:348
840 75c
Agent * ServiceID = {7971F918-A847-4430-9279-4A52D1EFE18D} Third party service
2014-07-28 14:17:06:348
840 75c
Agent * Search Scope = {Machine}
2014-07-28 14:17:11:012
840 75c
Misc WARNING: Send failed with hr = 80072efd.
2014-07-28 14:17:11:012
840 75c
Misc WARNING: SendRequest failed with hr = 80072efd. Proxy List used: <(null)> Bypass List used : <(null)> Auth Schemes used : <>
2014-07-28 14:17:11:012
840 75c
Misc WARNING: WinHttp: SendRequestUsingProxy failed for <http://download.windowsupdate.com/v9/1/windowsupdate/redir/muv4wuredir.cab>. error 0x80072efd
2014-07-28 14:17:11:012
840 75c
Misc WARNING: WinHttp: SendRequestToServerForFileInformation MakeRequest failed. error 0x80072efd
2014-07-28 14:17:11:012
840 75c
Misc WARNING: WinHttp: SendRequestToServerForFileInformation failed with 0x80072efd
2014-07-28 14:17:11:012
840 75c
Misc WARNING: WinHttp: ShouldFileBeDownloaded failed with 0x80072efd
If I install the SCEP client and run a subsequent Windows Update the client and its definitions update just fine. Once that's done, if I try using the SCEP client to update its definitions I get the same error. How can I change the client's default behavior
with regard to updating?
Please let me know if there's any other info you need. Thanks in advance for your help.
RikiHi,
Error: 80072efd
This error may occur when access to the Windows Update site is blocked.
For more information, please follow this step by step guide to configure SCEP:
How to Configure Definition Updates for Endpoint Protection in Configuration Manager
http://technet.microsoft.com/en-us/library/jj822983.aspx
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Best Practice for SAP BW 3.5 Installation (post install) procedure
Hi,
I have installed BW 3.5 on windows platform, database is Oracle 9.2. I have put Bi_Content as Add-on and followed these steps.
Install oracle
Install Oracle patch
Install PBW ABAP was
Activate TMS
Apply new SPAM,support packages and upgrade PI_Basis from 2004 to 2005.
Install BI_Content 353
Apply BI_content support packages
Perform client copy to client 100 from client 000 using SAP_ALL profile
Performed these without any error or discripency.
But now some have raised a issue that we need to follow the other way that is as mentioned below.
Install oracle
Install Oracle patch
Install PBW ABAP WAS
Install BI_Content 353
Perform client copy to client 100 from client 000 using SAP_ALL profile
Activate TMS and place in proper domain
Apply new SPAM,support packages and upgrade PI_Basis from 2004 to 2005.
Kindly help me out as its of high priority now.
Thanks in advance.
Regards,
chaitraHello Ramesh,
you should have a look at the SAP Instguide, and if it tells you to do as your colleagues say, open a ticket to SAP and ask, whether doing it the otherw ay could have spoiled your system. Anything but an official "yes, it's ok" won't help you.
For the other guys: have a loook at http://service.sap.com/instguides, there you can find all the guides you need.
kind regards,
Carl -
5.2 Patch 2 Post-Install Error
Jay,
I am installing patch 2 for IMS 5.2 today and got the following
errors during the Post-install: (imsimta test -rewrite -debug postmaster)
(can you take a look and comment ?) maybe this is because LDAP (directory server) was not running?
I changed the company domain in the output below:
5.2p2 has been installed successfully.
Running Post-install procedures.
/var/iplanet/ims52/msg-mailsvr2/imsimta chbuild
/var/iplanet/ims52/msg-mailsvr2/imsimta cnbuild
[05/Jan/2005:11:13:10 -0600] mailsvr2 [3422]: General Warning: could not get server configuration in ldap, using cached configuration information
/var/iplanet/ims52/msg-mailsvr2/imsimta cleandb
/var/iplanet/ims52/msg-mailsvr2/imsimta counters -delete
11:13:11.79: Exit code = 0 (2) - IMTA__NO, basic NO, log_delete_sections error
/var/iplanet/ims52/msg-mailsvr2/imsimta version
SunOS mailsvr2 5.8 Generic_117350-10 sun4u sparc SUNW,Ultra-60
iPlanet Messaging Server 5.2 Patch 2 (built Jul 14 2004)
libimta.so 5.2 Patch 2 (built 19:30:12, Jul 14 2004)
/var/iplanet/ims52/msg-mailsvr2/imsimta test -rewrite -debug postmaster
Initializing mm_.
Initializing mm_ submission.
Checking identifiers.
*** Debug output from initializing MM for submission:
11:13:12.33: mmc_winit('l','[email protected]','[email protected]') called.
11:13:12.33: Queue area size 48882178, temp area size 48882178
11:13:12.33: 12220544 blocks of effective free queue space available; setting disk limit accordingly.
11:13:12.33: Rewriting: Mbox = "postmaster", host = "mailsvr2.xyz-company.com", domain = "$*", literal = "", tag = ""
11:13:12.33: Rewrite: "$*", position 0, hash table -
11:13:12.33: Found: "$E$F$U%[email protected]"
11:13:12.33: Rewrite failed, not forward.
11:13:12.33: Rewrite: "$*", position 1, hash table -
11:13:12.33: Failed.
11:13:12.33: Rewrite: "$*", position 0, rewrite database -
11:13:12.33: Failed
11:13:12.33: Rewriting: Mbox = "postmaster", host = "mailsvr2", domain = "mailsvr2.xyz-company.com", literal = "", tag = ""
11:13:12.33: Rewrite: "mailsvr2.xyz-company.com", position 0, hash table -
11:13:12.33: Found: "$U%[email protected]"
11:13:12.33: New mailbox: "postmaster".
11:13:12.33: New host: "mailsvr2.xyz-company.com".
11:13:12.33: New route: "mailsvr2.xyz-company.com".
11:13:12.33: New channel system: "mailsvr2.xyz-company.com".
11:13:12.33: Looking up host "mailsvr2.xyz-company.com".
11:13:12.33: - found on channel l
11:13:12.33: Routelocal flag set; scanning for % and !
11:13:12.33: Rewriting: Mbox = "postmaster", host = "mailsvr2.xyz-company.com", domain = "$*", literal = "", tag = ""
11:13:12.33: Rewrite: "$*", position 0, hash table -
11:13:12.33: Found: "$E$F$U%[email protected]"
11:13:12.33: Rewrite failed, not forward.
11:13:12.33: Rewrite: "$*", position 1, hash table -
11:13:12.33: Failed.
11:13:12.33: Rewrite: "$*", position 0, rewrite database -
11:13:12.33: Failed
11:13:12.33: Rewriting: Mbox = "postmaster", host = "mailsvr2", domain = "mailsvr2.xyz-company.com", literal = "", tag = ""
11:13:12.33: Rewrite: "mailsvr2.xyz-company.com", position 0, hash table -
11:13:12.33: Found: "$U%[email protected]"
11:13:12.33: New mailbox: "postmaster".
11:13:12.33: New host: "mailsvr2.xyz-company.com".
11:13:12.33: New route: "mailsvr2.xyz-company.com".
11:13:12.33: New channel system: "mailsvr2.xyz-company.com".
11:13:12.33: Looking up host "mailsvr2.xyz-company.com".
11:13:12.33: - found on channel l
11:13:12.33: Routelocal flag set; scanning for % and !
11:13:12.33: Mapped return address: [email protected]
*** Debug output from rewriting a forward header address:
11:13:12.33: Rewriting: Mbox = "postmaster", host = "xyz-company.com", domain = "$*", literal = "", tag = ""
11:13:12.33: Rewrite: "$*", position 0, hash table -
11:13:12.33: Found: "$E$F$U%[email protected]"
11:13:12.33: Rewrite failed, not envelope.
11:13:12.33: Rewrite: "$*", position 1, hash table -
11:13:12.33: Failed.
11:13:12.33: Rewrite: "$*", position 0, rewrite database -
11:13:12.33: Failed
11:13:12.33: Rewriting: Mbox = "postmaster", host = "xyz-company", domain = "xyz-company.com", literal = "", tag = ""
11:13:12.33: Rewrite: "xyz-company.com", position 0, hash table -
11:13:12.33: Found: "$U%[email protected]"
11:13:12.33: New mailbox: "postmaster".
11:13:12.33: New host: "xyz-company.com".
11:13:12.33: New route: "mailsvr2.xyz-company.com".
11:13:12.33: New channel system: "mailsvr2.xyz-company.com".
11:13:12.33: Looking up host "mailsvr2.xyz-company.com".
11:13:12.33: - found on channel l
11:13:12.33: Routelocal flag set; scanning for % and !
11:13:12.33: Rewrite rules result: [email protected]
11:13:12.33: Checking reverse URL cache for: [email protected]
11:13:12.33: Applying reverse URL pattern ldap:///$V?mail?sub?$Q to: [email protected]
11:13:12.34: URL generation failed, status = 0
forward channel =
backward channel = l
header To: address = [email protected]
header From: address = [email protected]
envelope To: address = (route (reprocess-daemon-error,reprocess-daemon-error)) (host xyz-company.com)
envelope From: address = [email protected]
name =
mbox = postmaster
Extracted address action list:
[email protected]
Extracted 733 address action list:
[email protected]
Address list expansion:
-13 expansion total.
*** Debug output from submitting an envelope address:
11:13:12.34: mmc_wadr(0x00060450,'postmaster','postmaster') called.
11:13:12.34: Copy estimate before address addition is 1
11:13:12.34: Parsing address postmaster
11:13:12.34: Rewriting: Mbox = "postmaster", host = "xyz-company.com", domain = "$*", literal = "", tag = ""
11:13:12.34: Rewrite: "$*", position 0, hash table -
11:13:12.34: Found: "$E$F$U%[email protected]"
11:13:12.34: Match, pattern = "xyz-company.com", current = "(*domaincheck*)"
11:13:12.34: old state = not checked.
11:13:12.34: Performing domainMap check on xyz-company.com.
11:13:12.34: domain check failed with temporary error 91.
11:13:12.34: Temporary lookup failure, using fallback rewrite reprocess-daemon$Mtcp_local$1M$1~-error$4000000?Temporary lookup failure
11:13:12.34: Match, pattern = "tcp_local", current = "l"
11:13:12.34: old state = succeeded.
11:13:12.34: new state = succeeded.
11:13:12.34: New mailbox: "postmaster".
11:13:12.34: New host: "xyz-company.com".
11:13:12.34: New route: "reprocess-daemon-error".
11:13:12.34: New channel system: "reprocess-daemon-error".
11:13:12.34: New error message: "Temporary lookup failure".
11:13:12.34: Looking up host "reprocess-daemon-error".
11:13:12.34: - Not found
11:13:12.34: Copy estimate after address addition is 1
Submitted address list:
Address list error -- 4.0.0 Temporary lookup failure: postmaster
Submitted notifications list:
Checking installed version string.
New Installed Version is 5.2 Patch 2
Please consult the README.txt file for post-installation instructions.
#Yes. "All iMS services" means running stop-msg, and making sure all processes that started from that are done. Specifically:
tcp_smtp_server
tcp_smtp_client
ims-master
imapd
popd
mshttpd
dispatcher
job_controller
things not included:
slapd
admin-serv
web servers
etc. -
Hi
I have VS 9 installed and was wanting to install LightSwitch so downloaded the ISO(VSLS2011_ENU.iso) and burnt to disk ran
setup.exe and received the this message.
"Setup could not install the following component:
Microsoft ApplicationError Reporting"
The log shows..
[02/09/15,13:52:02] Microsoft Application Error Reporting: [2] CMsiComponent::Install() expects the setup file for Microsoft Application Error Reporting, but the file failed verification.
[02/09/15,13:52:03] setup.exe: [2] ISetupComponent::Pre/Post/Install() failed in ISetupManager::InternalInstallManager() with HRESULT -2147467259.
[02/09/15,13:52:04] SimpleUI: [2] DepCheck indicates Microsoft Application Error Reporting is not installed.
[02/09/15,13:52:05] SimpleUI: [2] DepCheck indicates VC 9.0 Runtime (x86) was not attempted to be installed.....
.NetFramework 3.5
C:\Users\xxxxxx>Winmgmt /verifyrepository
WMI repository is consistent.
PC is win 7 pro 64bitHi ghw123,
Welcome to Lightswitch forum.
According to the error message above, this issue is related to verification. For this issue, you need make sure that you download VSLS2011_ENU.iso from Microsoft official site, see:
http://download.microsoft.com/download/8/0/0/80047AD9-1D3E-46EB-8CF8-DFDA59E7799D/VSLS2011_ENU.iso
In addition, if you want to learn LightSwitch, I'd like to suggest you to download VS2012 or VS2013, many new features are added to them. see:
http://www.visualstudio.com/en-us/downloads
You need select the Lightswitch option when you install VS2012/VS2013.
Best regards,
Angie
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
I have tried to upgrade a CUC 8.5 cluster to 8.6.2. The refresh cop file was installed as per instructions including reboots. When trying to upgrade the 1st server (primary/pub) everything goes well until installing the last unity connection component and i get "Error detected in post-install phase." The system then restores to 8.5 and all is well (which is the good news).
Looking through some of the logs i found the cuc-import failed to replace the db.
Anyone else seen this? I will open a tac case but thought i would check here first....I neglected, this is a VMWare on UCS ... memory/HDD/CPU is all in spec.
-
Post-install, cannot update pacman, failed to commit transaction
Hello,
Arch install in a virtual box (Oracle VB). Post-install, synced packages OK by issuing pacman -Syy.
Want to install sudo, issue pacman -S sudo, below is what I get.
eth0 interface OK
Both core and netinstall images have been tested, same problem.
I'm new to Arch and am stuck and run out of ideas as to how to resolve, any ideas? Thanks much
#pacman -S sudo
:: The following packages should be upgraded first:
pacman
:: Do you want to cancel the following operation
:: and upgrade these packages now? [Y/n]
resolving dependencies...
looking for inter-conflicts...
Targets (11): linux-api-headers-3.3.2-1 glibc-2.15-10 libarchive-3.0.4-1
pth-2.0.7-4 libksba-1.2.0-1 libassuan-2.0.3-1 pinentry-0.8.1-3
dirmngr-1.1.0-4 gnupg-2.0.19-2 gpgme-1.3.1-4 pacman-4.0.3-1
Total Download Size: 0.00 MB
Total Installed Size: 52.92 MB
Proceed with installation? [Y/n]
error: failed to commit transaction (conflicting files)
glibc: /usr/bin/tzselect exists in filesystem
glibc: /usr/sbin/zdump exists in filesystem
glibc: /usr/sbin/zic exists in filesystem
Errors occurred, no packages were upgraded.Welcome to the boards ai69. Please search before posting, this issue has been covered extensively here.
There are stickies in this forum as well as the Forum Etiquette and Arch Way that you should read on the wiki. -
Oracle Apps R12 post install fails.
Hi All, I am trying to install Oracle Apps r12 on Ubuntu 8.10, after everything went good,,,the post install failed with all entries having red cross.
it said
HTTP server not responding
JSP page is not responding
Database file was created
Login Page is not responding
Help page is not responding
environment file was not created
Vitual Directory page not responding
Can some please help me with this, i have been trying to install Oracle Apps R12 for a long long time.
Thanks.Thanks for replying.
I tried to install Oracle Enterprise Linux 5 but i was not able to connect to the internet with that OS so i chose Ubuntu 8.10. I have Intel wifi 5000 card,,,,which was not working in OEL 5. If you have any fix for that, then I will certainly switch to OEL 5.
Please help.
thanks. -
Post install failing with Java Exception creating the Oracle Context
I have not been able to complete the post-install portion of the OID which is run by the Oracle 9iAS Infrastructure installer.
Is there a way to create the Oracle Context and whatever else is part of the /ldap/postcfg/postcfg script without the use of the Java assistants? I am getting a Java exception when creating the Oracle Context.
Thanks,
e.are you trying to install ias on Linux or windows??
-
Errors During Post Install Check on Ubuntu 12.04
Hello Gurus,
I'm trying to install EBS R12(12.1.1) on Ubuntu 12.04 64-Bit. I patched the HTTP server with 6078836 (Copied libdb.so.2 to /usr/lib).
I did the md5sum check before starting the install. I completed the kernel settings as per the note below:
Oracle E-Business Suite Installation and Upgrade Notes Release 12 (12.1.1) for Linux x86-64 [ID 761566.1]
Contents of /etc/hosts
127.0.0.1 localhost.localdomain localhost
192.168.1.101 erpbeginner.dyndns.org erpbeginner
Installation went smooth till the Post install checks where it fails for the following:
HTTP
JSP
Login Page
Help Page
Virtual Directory
Contents of the log file:
command: /d01/stage/startCD/Disk1/rapidwiz/bin/riwTDBup.sh /d01/r12/VIS/db/tech_st/11.1.0/VIS_erpbeginner.env APPS/APPS
riwTDBup.sh started at Tue Oct 16 07:30:46 EDT 2012
Parameters passed are : /d01/r12/VIS/db/tech_st/11.1.0/VIS_erpbeginner.env APPS/APPS
The environment settings are as follows ...
ORACLE_HOME : /d01/r12/VIS/db/tech_st/11.1.0
ORACLE_SID : VIS
TWO_TASK :
PATH : /d01/r12/VIS/db/tech_st/11.1.0/perl/bin:/d01/r12/VIS/db/tech_st/11.1.0/bin:/usr/bin:/usr/sbin:/d01/r12/VIS/db/tech_st/11.1.0/appsutil/jre/bin:/bin:/usr/bin/X11:/usr/local/bin:/usr/bin:/d01/stage/startCD/Disk1/rapidwiz/unzip/Linux_x64:/usr/bin:/usr/lib/lightdm/lightdm:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:.
LD_LIBRARY_PATH : /d01/r12/VIS/db/tech_st/11.1.0/lib:/usr/X11R6/lib:/usr/openwin/lib:/d01/r12/VIS/db/tech_st/11.1.0/lib:/usr/dt/lib:/d01/r12/VIS/db/tech_st/11.1.0/ctx/lib
Executable : /d01/r12/VIS/db/tech_st/11.1.0/bin/sqlplus
riwTDBup.sh exiting with status 0
Database ORACLE_HOME connection test has succeeded
command: /d01/stage/startCD/Disk1/rapidwiz/bin/riwTDBup.sh /d01/r12/VIS/inst/apps/VIS_erpbeginner/ora/10.1.2/VIS_erpbeginner.env APPS/APPS
riwTDBup.sh started at Tue Oct 16 07:30:47 EDT 2012
Parameters passed are : /d01/r12/VIS/inst/apps/VIS_erpbeginner/ora/10.1.2/VIS_erpbeginner.env APPS/APPS
The environment settings are as follows ...
ORACLE_HOME : /d01/r12/VIS/apps/tech_st/10.1.2
ORACLE_SID :
TWO_TASK : VIS
PATH : /d01/r12/VIS/apps/tech_st/10.1.2/bin:/usr/bin:/usr/sbin:/d01/r12/VIS/apps/tech_st/10.1.3/appsutil/jdk/jre/bin:/usr/bin:/d01/stage/startCD/Disk1/rapidwiz/unzip/Linux_x64:/usr/bin:/usr/lib/lightdm/lightdm:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games
LD_LIBRARY_PATH : /d01/r12/VIS/apps/tech_st/10.1.2/lib32:/d01/r12/VIS/apps/tech_st/10.1.2/lib:/usr/X11R6/lib:/usr/openwin/lib:/d01/r12/VIS/apps/tech_st/10.1.2/jdk/jre/lib/i386:/d01/r12/VIS/apps/tech_st/10.1.2/jdk/jre/lib/i386/server:/d01/r12/VIS/apps/tech_st/10.1.2/jdk/jre/lib/i386/native_threads:/d01/r12/VIS/apps/apps_st/appl/sht/12.0.0/lib
Executable : /d01/r12/VIS/apps/tech_st/10.1.2/bin/sqlplus
riwTDBup.sh exiting with status 0
sqlplus: error while loading shared libraries: libclntsh.so.10.1: cannot open shared object file: No such file or directory
Apps ORACLE_HOME connection test has succeeded
Configuration Upload
uploading config file at /d01/r12/VIS/db/tech_st/11.1.0/appsutil/conf_VIS.txt
AppsConfig : 'config.txt' uploading...
ADX Database Utility
getConnectionUsingAppsJDBCConnector() -->
APPS_JDBC_URL='null'
Trying to get connection using SID based connect descriptor
getConnection() -->
sDbHost : erpbeginner
sDbDomain : dyndns.org
sDbPort : 1521
sDbSid : VIS
sDbUser : APPS
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@erpbeginner.dyndns.org:1521:VIS
Connection obtained
-------------------ADX Database Utility Finished---------------
Successful upload of config file at /d01/r12/VIS/db/tech_st/11.1.0/appsutil/conf_VIS.txt
Environment File
Database ORACLE_HOME environment file passes instantiated variables test:
File = /d01/r12/VIS/db/tech_st/11.1.0/VIS_erpbeginner.env
Apps ORACLE_HOME environment file passes instantiated variables test:
File = /d01/r12/VIS/inst/apps/VIS_erpbeginner/ora/10.1.3/VIS_erpbeginner.env
iAS ORACLE_HOME environment file passes instantiated variables test:
File = /d01/r12/VIS/inst/apps/VIS_erpbeginner/ora/10.1.2/VIS_erpbeginner.env
APPL_TOP environment file passes instantiated variables test:
File = /d01/r12/VIS/apps/apps_st/appl/VIS_erpbeginner.env
ADOVARS environment file passes instantiated variables test:
File = /d01/r12/VIS/apps/apps_st/appl/admin/adovars.env
APPSCONFIG passes instantiated variables test:
File = /d01/r12/VIS/apps/apps_st/appl/admin/adconfig.txt
DBC File
DBC file passes instantiated variables test:
File = /d01/r12/VIS/inst/apps/VIS_erpbeginner/appl/fnd/12.0.0/secure/VIS.dbc
HTTP
checking URL = http://erpbeginner.dyndns.org:8000
RW-50015: Error: - HTTP Listener is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
Help Page
checking URL = http://erpbeginner.dyndns.org:8000/OA_HTML/help
RW-50015: Error: - Help Page is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
Virtual Directory
RW-50015: Error: - Http Server Virtual Directories is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
JSP
checking URL = http://erpbeginner.dyndns.org:8000/OA_HTML/jtfTestCookie.jsp
RW-50015: Error: - JSP is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
Login Page
RW-50015: Error: - Login Page is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
When I search for the library "libclntsh", I found 3 matches to libclntsh.so.11.1,libclntsh.so.10.1 and libclntsh.so.
Only libclntsh.so.11.1 is a file and rest are symbolic links to this file which seem to be broken.
So I tried to redo the symbolic links and did a retry for the post install checks which failed again.
Can somebody please shed some light on this?
Best Regards,
RichieI'm trying to install EBS R12(12.1.1) on Ubuntu 12.04 64-Bit. Please note that this OS is not certified.
sqlplus: error while loading shared libraries: libclntsh.so.10.1: cannot open shared object file: No such file or directoryPlease see the suggested solution in (Installing R12.0.4 Ebuisines Suite Autoconfig Fails With: sqlplus: error while loading shared libraries: libclntsh.so.10.1: cannot open shared object file: No such file or directory [ID 579254.1]). Also, please make sure you have all RPMs installed as per (Oracle Applications Installation and Upgrade Notes Release 12 (12.0.4) for Linux (64-bit) [ID 416305.1]) and follow all post installation steps.
Thanks,
Hussein -
5.2 Patch 4 install docs
Where is the Sun 5.2 Patch 4 install docs?
I have downloaded the zip file and unzipped it,
but there is no idsktune .
I have 5.2 Install and Tuning, and the upgrade/migration guide.
JYard
UCLAOkay, apparently I can't edit my post...
This is actually a 5.1_patch4 replicating to a 5.2_patch4 server. One of my other agreements is the same, version-wise, with no issues.
Additionally, the consumer in the failed replication agreement is defined as a multi-master (for reasons outside the scope of this post)...
Maybe you are looking for
-
Do you need a special external hard drive for iMac?
Do you need a special external hard drive for iMac?
-
Characteristic Values are not updated in COPA Report
Dear Gurus I have created one characteristics and derive the value out of derivation rule but the same is not appearing in the COPA Report even though I mapped that Characteristics in my COPA Report. Please advice and help. Sivakumar Subramanian
-
Packaged webapp won't show main page on both beta and fennec nightly
i'm trying to install a webapp from http://www.unixmedia.it/webapp/ following the docs. The webapp consist in just an "hello world" where i have a single page app and lauch_path to /index.html trying to download the app by wget https://controller.apk
-
How can i unlock my iphone by myself ?, how can i unlock my iphone by myself ?
Hi I have a question, Actually, I had my cellphone with locked iphone 4 from At&t previous, and the contract is already done for two years,what I want to do is unlock my cellphone, how can I do it by myself?
-
Dwell During Sequence of Blended Lines and Arcs
Hi, I am trying to create a motion profile using blending that completes an ordered sequence of moves,mostly,it works great. But in some Speed Setting ,it don't work fine that come to a quite small speed as if there is a dwell. I am using PCI 7334