On a photosmart 7510 printer , where do i select to print in black only.

On my Photosmart 7510 where do I select to print in black only.

Hi there,
Welcome to the forum! What operating system are you using?
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Similar Messages

  • After a network interrupti​on, my photosmart 7510 prints pages with a "d" on them.

    After a network interruption, my Photosmart 7510 prints pages with a "d" on them. I have Windows 7. There is no error message on my computer. When I check "See What's Printing," nothing is shown.

    Hi rosegirlmom,
    Does this only happen when the router is reset?
    Why is the router getting reset?
    Have you tired using a different router to see if this stops the issue?
     Restore Network Defaults:
    On the printer control panel, touch the Wireless icon ( ).
    Touch Settings .
    Touch and then slide your finger up on the display to scroll to Restore Network Defaults .
    Touch Restore Network Defaults .
    Touch Yes to confirm your selection.
    Restart the printer, and then connect it back to your network.
    You may need to run the Update IP address icon located in the HP folder in All Programs to update the computers with the new IP address assigned to the printer.
    Let me know what happens?
    I am an HP employee.
    Say Thanks by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as "Accepted Solution"

  • Unable to print borderless 4x6 photos with the Photosmart 7510 printer.

    I am unable to print borderless 4x6 photos with the Photosmart 7510 printer.  There are no option listed for any size borderless printing when i choose the paper size and paper type.   I am running Windows 7 Home Premium  64-bit. 
    This question was solved.
    View Solution.

    I found it. Once you hit print, click on the options link. It opens a separate window. In that window there are two links, one says color management and the other says printer properties, click printer properties. That opens a new window, in that window click the advanced button. That opens a new window titled HP 7510 Advanced options, under the printer feature section near the bottom you will see "Borderless Printing". Left click on that and to the right a drop down menu opens, select borderless, hit ok. After you do this, it will print borderless however you will still NOT see that option when you print, like you used to with the older HP printers. I couldn't find it in the help section, I just stumbled upon it, very frustrating! It will print borderless.

  • Officejet j5780 all-in-one; print in Black only

    I do not require color print capability on my j5780, I want to print in Black only (I also own a Photosmart 6380 for color needs). 
    A new Black cartridge has been installed and the spent tri-color cartridge has been left in-place.
    PROBLEM: The printer's LED window now displays the message "Cartridge error: Cartridge on the left [i.e. tri-color] must be replaced." 
    Prior to replacing the Black cartridge I was able to print in Black only; now, it appears that capability has been lost. I do not want to install a new tri-color cartridge (particularly at HP's price) just to restore Black-only print capability.
    QUESTION: Is it possible to reset, or otherwise over-ride, the printer's color cartridge requirement to in order to achieve Black-only printing?   

    Hello DisgustedOne,
    What may have happened is that while you were printing in black only, the black ink may have ran out, then the printer started using the tri-color cartridge to create black. When the tri-color cartridge ran out, you replaced the black, but are still getting an error to replace the tri-color cartridge.
    Some HP printers allow for what is called backup mode, where the printer only uses one of the two cartridges, an example can be found in the following link:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01625311&cc=us&dlc=en&lc=en
    There are a couple things you can try:
    1. Set the printer to print in black only (can be done in the printer prefs, usually under a grayscale setting)
    2. Take out the color cartridge altogether and see if it will print.
    If both of those options fail, unfortunately, you will need to replace the color cartridge.
    If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

  • My hp 7160 wants to print in black only after replacing the yellow cartridge. Any suggestions?

    My hp 7160 wants to print in black only after replacing the yellow cartridge. Ink level shows full amount. Test page prints fine.
    I have tried different programs to color print in, all return the same error message.

    Hi @obxgirl,
    Welcome to the HP Support Forums! I see you are running into some print quality issues on your HP Photosmart 5510, you are unable to print in black ink.
    I would like you to continue here: Printer Does Not Print Black Ink or Color Ink, or Prints Blank Pages, I understand you may have done some of these steps already but I need you to complete all steps in order to resolve the missing black issue you are experiencing.
    Please note: There are three printhead cleaning stages. Complete all three stages if necessary. If the printhead is badly clogged, it might require another cleaning cycle. If so, wait 30 minutes after the last (third) cleaning stage to start the first stage of the cleaning process over again.
    If you are still unable to print in black ink, I suspect the issue may be the printer and not the cartridge. Please let me know which Country/Region you are in as well as the product Warranty status: HP Warranty Checker
    I hope to hear from you soon.
    Thanks,
    HevnLgh
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • PRINT IN BLACK ONLY OFFICEJET 4622

    how do i get my officejet 4622 to print only w/black ink on a mac? thanks.

    Hello TDavid666,
    I understand you are trying to get your Officejet to print in black only, is that correct? I will help point you in the right direction.
    You have actually posted on the desktop forum; here is the link to the printer forum where you can post and get the most accurate answer to your issue. You may have to create a new profile if not just click on new post.
    Thank you 
    Clicking the White Kudos star on the left is a way to say Thanks!
    Clicking the 'Accept as Solution' button is a way to let others know which steps helped solve the problem!

  • Setting Default printing as Black only

    I know how to enable printing in black only using printer properties and colour ->greyscale-> in black ink only.But that setting lasts only for that session/ file being printed. If I load another file or another session the default goes back to colour. Even if I make a printing short cut that short cut gets saved but is not the default. I have solved the problem by removing the colour cartridge and the printer prints in black only even if I do not change the setting from "colour". This works but is there any other elegant solution? Regards S S Kini 

    Hi , I see by your post that the black only settings is only working for one session. I would like to help you.
    Did you download and install the HP Deskjet F4200/F4224 All-in-One Printer series Full Feature Software and Driveror are you using the preinstalled Windows drivers? I have provided a document for setting the default printer settings for a single job and for all print jobs. Most likely this is the way you have set the black only.HP Deskjet, Officejet, and Photosmart Printers and All-in-Ones - Changing Print Settings in Windows 8. If the black only isn't holding the setting in the print driver, I would suggest to uninstall and reinstall the print drivers. They might have become corrupted. If you appreciate my efforts, please click the 'Thumbs up' button below. Thank You.

  • Since HP Update. I can no longer print in black only and draft. Toolbox reports no problems found.

    Since HP Update. I can no longer print in black only and draft. Toolbox reports no problems found.

    This is a duplicate topic with your other post.  I will lock this one, please look here for responses.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • How do I get my printer to print in black only?

    How do I get my printer to print in black only?

    Hi sugarking, what printer model do you have?
    Thanks
    Although I am an HP employee, I am speaking for myself and not for HP.
    Twitter: @Ciara_B_HP

  • How to print in black only when yellow toner is empty HP Color Laser Jet 2500.

    Hi,
    I have a HP color laserjet 2500, I need to print in black only, I have a nice full toner, but the yellow has just ran out and it's flashing on the top of the printer, can I tell the printer to ignor this and just use the black as the documents are all in black/grey?
    Thanks
    Andy 

    Hello.. Try this:::
    *click on start
    *go to the control panel
    *go to printers for windows vista user
    *go to printers and faxes for windows xp user
    *right click on your printer icon
    *go to printing preferences
    *select on color tab
    *you will see options for color
    *select the print in grayscale
    *click on apply or ok button
    *try to print
    ---let me know if it works!!!

  • How to set default printing in black only

    Greetings,
    I'd like to set my default printing with Firefox at black ink only, which I can do individually prior to printing a page, but it reverts to color after that printing. But if I set the size at, say, 80%, that becomes the default setting, or if I set portrait/landscape for a single printing, that becomes the default setting. Why can't the desired black-ink only setting default like the size/portrait/landscape setting? What I want to do is set the printing permanently at black only, and the size at 100%, but allow one-time printing at landscape or portrait, or sizes less than 100% without those settings becoming the default. How can I do this? Thanks for any help
    Best wishes, Tom
    I've tried the help solutions on the website to no avail....

    Greeting ideato,
    Thanks so much for your reply. I've clicked on the Firefox button at upper left, then Print, then Properties, then Advanced, under which is listed Printer Features (I have only 1 printer), below which is a line with Print in Grayscale, clicking on which has has 3 options: Off (apparently default), High quality Grayscale, and Black Ink Only. I click on the latter, and click on OK for this window and others in the sequence, and it'll print in black only for the present printing, but will revert to color for the next printing, 'though like I said, if I change the size to 80% or from portrait to landscape, those settings will remain. I can't figure it out. Again, thanks for any help.
    Regards, Tom

  • Print in Black only

    I have a full cartridge of black ink. I am out of one of the colors. Can I print in black only or do I need to replace the color cartridge in order for my printer to work?

    Hello there! Welcome to the forums @dragoness911 
    I saw your post about the question you had about if your Officejet 6600 will print with one of the cartridges depleted.
    I wanted to share this document with you, and let you know that no, the printer cannot print with one cartridge depleted.
    Cannot Print When One of the HP Ink Cartridges is Empty
    I hope that helps answer your question!
    Have a great Monday, and thanks for posting in the community
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • Printing in black only

    How  print in black only model 6700?

    In the printer properties, if there is a Document Option "Print in Grayscale Only", turn that on.
    ======================================================================================
    * I am an HP employee. *
    ** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **
    ***Click on White “Kudos” STAR to say thanks!***

  • Printing in black only with depleted COLOR cartrages doesn't work.

    I just downloaded a missing W2 and NEED to print it like yesterday. My yellow and megenta cartrages are empty. But the document is black and white but NONE of the ways of printing in black only work because HP uses my VERY expencive ink to do things OTHER then printing? Really??? Is that for real? Does HP really charge an arm and a leg for ink and then use it for purposes OTHER then putting said ink on paper?

    I have the exact same issue. The instructions state specifically that it will print with a depleted cartridge in grayscale but nothing works. I had to order one online. What is infuriating is that I rarely print in color. If I knew this would be an issue I never would have bought this printer. 

  • Trying to print in black only

    one cartriage depleted trying to print  in black only. setting is on gray scale still will not print

    Please read this post then provide some details.  What printer model? What operating system?  Are there any error messages on the printer or computer screen?
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Maybe you are looking for

  • I have multiple phones, how do i set them all up on icloud?

    Is there a way to set all phones up in one iCloud, or does each phone have to be set up separately?

  • How to find which sequence name is used in a table - Redux

    (The other thread was locked before I could respond, so I'm posting this here as a non-question.) Beginning with 12c, there is now a way to associate a sequence with a table.  It's a new feature called an Identity column. create table t (some_id numb

  • Itunes 10,5,3 for mac won't start up

    Itunes wil not start up. I get a error report. I have reinstalled it and have run the repair drive programm, but with the same result.

  • How to pass parameter for table name in  form6i.

    Hi , I am facing the problem to pass parameter for table name in form6i. If any solution please infirm me earliest to my mail id. ([email protected]) example: begin select ename into :ename from :tab_name where empno =7788; end; It gives error as bad

  • Possible memory leaks with WL 6.1 SP1?

    Hi, I'm developing an application using WL 6.1 SP1 on NT/2000 (and my client is using an AIX server). Running "load tests" (-> only one client wich creates lot of records) and monitoring the process using the console I can see that the memory usage g