On-board mike output to phone line?

On a 10.6.8 intel desktop, can I have on-board mike output to phone line?
Someone wants to interview me for two hours.
How can I do that hands-free through, for example, GarageBand, or directly, or inside a Skype I'd have to add, or...?
Kudos BTW for that slide show on Steve at "the front door".
An iPad and and an iPhone are on my wish list. I hope Kris Kringle will be good to me this year.

Have you tried maybe adding a viewport meta tag to the header?
Like this:
<meta name="viewport" content="width=device-width, initial-scale=1">
Hope that helps.

Similar Messages

Please help, noisy phone line think its a high res...

HI,
Just moved in and phone line / bt broadband was activated a week ago. Phone master socket is OpenReach branded.
I have the BT supplied broadband filter fitted directly to the test socket (just the adsl router and a single phone connected).
Using the 17070 quiet line test , i have varying volumes on hissing and noise on the phone. This varies between loud and intrusive (difficult to hear callers) to fairly quiet. This seemed to be better during the cold weather over last weekend, but is worse again this morning.
I can also hear adsl connection noise when the router was connecting, depsite being through the adsl filters. This lead me to find threads related to High resistance faults whcih I think may apply to me.
BT online fault test shows no fault found.
Adsl Stats:
I was supplied with a home hub 3A
Connection Information
Line state: Connected
Connection time: 0 days, 21:29:11
Downstream: 3.625 Mbps
Upstream: 448 Kbps
ADSL Settings
VPI/VCI: 0/38
Type: PPPoA
Modulation: G.992.1 Annex A
Latency type: Interleaved
Noise margin (Down/Up): 10.6 dB / 15.0 dB
Line attenuation (Down/Up): 32.2 dB / 16.0 dB
Output power (Down/Up): 19.9 dBm / 12.4 dBm
FEC Events (Down/Up): 2941 / 325
CRC Events (Down/Up): 12 / 45
Loss of Framing (Local/Remote): 0 / 0
Loss of Signal (Local/Remote): 0 / 0
Loss of Power (Local/Remote): 0 / 0
HEC Events (Down/Up): 79 / 30
Error Seconds (Local/Remote): 8 / 22
1. Product name: BT Home Hub
2. Serial number:
3. Firmware version: Software version 4.7.5.1.83.8.57.1.3 (Type A) Last updated Unknown
4. Board version: BT Home Hub 3.0A
5. ADSL uptime: 0 days, 21:31:21
6. Bandwidth: 448 / 3712
7. Data sent/received: 0.3 / 2.7
8. Broadband username: [email protected]
9. BT FON: Yes
10. Wireless network/SSID: BTHub3-KC3K
11. Wireless connections: Enabled, (802.11 b/g/n (Recommended)) 20 MHz
12. Wireless security: WPA and WPA2
13. Wireless channel: Automatic / 1
14. Firewall: Default
15. MAC Address:
16. VPI/VCI: 0 / 38
17. Line profile: Interleaved
18. Software variant: -
19. Boot loader: -
The home hub doesn't seem too good at keeping the sync, speed drops regularly and it maintains a high SNR.
My previous router was a Thomson Speedtouch 780, which provides a higher sync and much better stability. Presumably this is due to the broadcom chipset (would a home hub 3b also be better?)
Speedtouch stats from this morning:
speedtouch 4/12/12 08:45
DSL Connection
Link Information
Uptime: 1 day, 10:39:46
Modulation: G.992.1 annex A
Bandwidth (Up/Down) [kbps/kbps]: 448 / 5.120
Data Transferred (Sent/Received) [MB/MB]: 24,94 / 119,27
Output Power (Up/Down) [dBm]: 12,0 / 19,5
Line Attenuation (Up/Down) [dB]: 15,5 / 31,0
SN Margin (Up/Down) [dB]: 19,0 / 9,0
Vendor ID (Local/Remote): TMMB / TSTC
Loss of Framing (Local/Remote): 0 / 0
Loss of Signal (Local/Remote): 0 / 0
Loss of Power (Local/Remote): 0 / 0
Loss of Link (Remote): 0
Error Seconds (Local/Remote): 0 / 0
FEC Errors (Up/Down): 0 / 158.090
CRC Errors (Up/Down): 0 / 68
HEC Errors (Up/Down): 0 / 62
speedtouch 04/12/12 09:30
DSL Connection
Link Information
Uptime: 1 day, 11:25:26
Modulation: G.992.1 annex A
Bandwidth (Up/Down) [kbps/kbps]: 448 / 5.120
Data Transferred (Sent/Received) [MB/MB]: 28,90 / 129,91
Output Power (Up/Down) [dBm]: 12,0 / 19,5
Line Attenuation (Up/Down) [dB]: 15,5 / 31,0
SN Margin (Up/Down) [dB]: 19,0 / 4,5
Vendor ID (Local/Remote): TMMB / TSTC
Loss of Framing (Local/Remote): 0 / 0
Loss of Signal (Local/Remote): 0 / 0
Loss of Power (Local/Remote): 0 / 0
Loss of Link (Remote): 0
Error Seconds (Local/Remote): 0 / 0
FEC Errors (Up/Down): 0 / 171.051
CRC Errors (Up/Down): 0 / 68
HEC Errors (Up/Down): 0 / 62
As your can see theres a wide range in the SNR figures, although the speedtouch is much better at holding the sync and not dropping the speed.
Given the line attenuation at 31db, I would have expected a higher sync rate. The estimated line length of ~2.2km from kitz.co.uk seems to be about right.
Any advice appreciated, including how to report this fault to the right people.
Thanks
Jon

I'm suspecting that I will be getting billed for the last engineer visit ( as he couldn't find a fault and therefore said it must be my equipment). I can't afford to pay one fee let alone 2 if I report it again with the same result.
However since the visit, the occurrences of the intermittent noise on the line have been fewer and further between. This morning however, after listening to a 1571 message I heard more noise so I did a quiet line test to see. Initially the line was quiet, but then I heard some quit noise and then a ringing sound (like when you dial a number and it rings remotely) as if I had made a call. The "BT Quiet line message" cut in but I could still here the ringing underneath. I waited to see if I would be able to hear if someone answered but the ringing stopped after a while and I couldn't here a voice so I don't know if they answered or it rung off.
Is it possible my line is picking up the ring tone from another line?
Also, when the engineer arrived he initially said his test had shown a fault and that water must have got in somewhere. However when he removed my filter/phone/router from the test socket, his tests then showed no fault. Is it possible the fault only shows up when the adsl is active. Back when the line was first active I could the router negotiating (even thorough 2 filters) although this doesn't happen now.
Moving on to the adsl side of things, Currently my stats are:
DSL Connection
Link Information
Uptime: 0 days, 11:48:54
Modulation: G.992.1 annex A
Bandwidth (Up/Down) [kbps/kbps]: 448 / 5.440
Data Transferred (Sent/Received) [MB/MB]: 9,61 / 39,04
Output Power (Up/Down) [dBm]: 12,0 / 19,5
Line Attenuation (Up/Down) [dB]: 15,5 / 31,0
SN Margin (Up/Down) [dB]: 20,0 / 5,0
Vendor ID (Local/Remote): TMMB / TSTC
Loss of Framing (Local/Remote): 0 / 0
Loss of Signal (Local/Remote): 0 / 0
Loss of Power (Local/Remote): 0 / 0
Loss of Link (Remote): 0
Error Seconds (Local/Remote): 0 / 0
FEC Errors (Up/Down): 0 / 1.384
CRC Errors (Up/Down): 0 / 0
HEC Errors (Up/Down): 0 / 0
Interleaved.
With the BT Home hub (3a) the connection would drop peridocally, so I'm using my Thomson 780wl which hold the connection better and also shows less FEC errors than the HH.
I think the connection speed and the interlacing are poor given the line attenuation. The line length is about 2 - 2.5km, underground from the village to the exchange, overground to the house. No cabinets directly connected to exchange.
I've been monitoring signal to noise ratio and have noticed something odd:
This happens every day, in the same pattern. Its not interference from any internal wiring or appliances or heating etc. I understand that noise changes over time but this is a 5+ DB drop is this normal?
Any advice?

At a loss with phone line and broadband

Hi,
First of all, sorry for cross posting this, but as you might gather I'm currently stuck between a rock and a hard place.
http://community.bt.com/t5/Phones/At-a-loss-with-phone-line/td-p/54639
I'm not going to repeat everything in that post, just to say when all equipment is unplugged and you get crackles and white noise through the phone, it can not be equipment, no matter how intermittent. Am I correct?
The main reason for cross posting is around the annoying BRAS IP profile. It seems that for 30mins of static, I get stuck on a 130k profile for 3days. I could cope with the occasional outage or slow down, but 3days is half a week and when you have the recent bad weather, you get 1day of decent profile before the next spat! As a result of this, I would like to see if anyone else in the community has been through similar?
I will point out that I have been working in IT for 13years, so I like to pretend that I know something about things, but I must say that BT is one of the only companies that I deal with and dealt with that seem insistent on blaming the customer for everything.
Connection information
Line state Connected
Connection time 0 days, 1:44:21
Downstream 2,048 Kbps
Upstream 448 Kbps
ADSL settings
VPI/VCI 0/38
Type PPPoA
Modulation ITU-T G.992.1
Latency type Interleaved
Noise margin (Down/Up) 9.6 dB / 19.0 dB
Line attenuation (Down/Up) 53.0 dB / 29.5 dB
Output power (Down/Up) 17.8 dBm / 12.1 dBm
Loss of Framing (Local) 0
Loss of Signal (Local) 0
Loss of Power (Local) 0
FEC Errors (Down/Up) 5261636 / 45
CRC Errors (Down/Up) 0 / 2147480000
HEC Errors (Down/Up) nil / 28
Error Seconds (Local) 134
Solved!
Go to Solution.

No I'm suggesting the mod team is preferable to calling India ....
What they do with you is down to them .... and you.
Allbeit I doubt you'll see a profile reset, but even better you may see a lasting resolution, hopefully.

HT1178 I have BT Infinity at home with the BT modem connected to the phone line and then to a BThub which delivers the wif signal. I have purchased an airport extreme to improve wi fi strength if how do I connect up to hub it states connect modem to WAN o

I have BT Infinity at home with the BT modem connected to the phone line and then to a BThub which delivers the wif signal. I have purchased an airport extreme to improve wi fi strength if how do I connect up to hub it states connect modem to WAN on back of Airport Extreme.
Instructions do not mention connection to BT Hub and the BT modem has only one output which you dicsonnect from Hub and connect to airport extreme leaving. Once you do this Hub has no signal.
How do I rectify
Paul

you can also set up the Airport extreme to extend the wireless by hitting the wireless tab in the airport menu then click the drop down menu to select extend
Apple's "extend" function is a proprietary setting that was designed to only work with other Apple routers.
It would be extremely unlikely that this setting would work with a BT product, or any other manufacturer's product for that matter.
But, I haven't tested this with a BT product...and I suppose anything is possible.
Still, I would be extremely surprised if this worked.
The AirPort Extreme might "join" the BT network if you try this......but the AirPort does not provide any additional wireless signal coverage when it "joins" a wireless network. In fact, it really does nothing when it "joins" a network except enable the USB port.

Crackly phone line and broadband disconnecting

For a month or two i have been having problems with our phone line and broadband connection. The phone line is extremely noisy (interferance) and when you make a call or recieve a call the broadband disconnects. I have tried different filters, routers and wires but no good. I have conducted a quiet line test and the result was i could hear nothing on the line. When i unplug the hub and just have the phone connected to the socket the noise on the phone has gone and their is no problem, connecting the hub make the noise come back. As a result of all this my broadband speeds are very low.
Here is my hub stats and a bt whole sale speed test.
ADSL Line Status
Connection Information
Line state:
Connected
Connection time:
0 days, 00:36:05
Downstream:
6.75 Mbps
Upstream:
448 Kbps
ADSL Settings
VPI/VCI:
0/38
Type:
PPPoA
Modulation:
G.992.1 Annex A
Latency type:
Interleaved
Noise margin (Down/Up):
19.7 dB / 22.0 dB
Line attenuation (Down/Up):
7.0 dB / 3.0 dB
Output power (Down/Up):
13.9 dBm / 12.2 dBm
FEC Events (Down/Up):
7077 / 0
CRC Events (Down/Up):
12 / 0
Loss of Framing (Local/Remote):
0 / 0
Loss of Signal (Local/Remote):
0 / 0
Loss of Power (Local/Remote):
0 / 0
HEC Events (Down/Up):
19 / 0
Error Seconds (Local/Remote):
131 / 114
Hide details
Download Speed
0.81 Mbps
0 Mbps
2 Mbps
Max Achievable Speed
Download speedachieved during the test was - 0.81 Mbps
For your connection, the acceptable range of speeds is 0.4 Mbps-2 Mbps.
Additional Information:
Your DSL Connection Rate :6.91 Mbps(DOWN-STREAM), 0.45 Mbps(UP-STREAM)
IP Profile for your line is - 1.25 Mbps
My dsl connection rate can get as high as 7.9 Mbps
Any advice would be helpful thank you
Solved!
Go to Solution.

your drops in connection have at one point reconnected with a far lower speed than normal resulting in the low ip profile. if you stay conencted 24/7 for 3/5 days the profile will correct itself for your current connection speed
I would as john46 suggested connected to test socket with a new filter and see if that helps
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Great....upgraded my bundle and was forced into digital voice. Now I've lost my 2nd phone line

I'm beyond frustrated yet again with Verizon and trying to do an upgrade. I upgraded my bundle and was forced into digital voice. Really didn't care to change my phone but went ahead. So today I wake up to no 2nd phone line or distinctive ring line. I've spent 2+ hours on the phone trying to get someone to get my phone line back and I'm so sick of being transferrred, calls dropped, wrong department, etc. I don't have time for this **bleep**! Plus...the online chat isn't working either. I give up!
If there is a tech person out there that can help me get my line back....please tell me who the heck to call without getting a one hour + run around with no help!
Deanne
Frustrated in Keller

I'm sorry to hear about your phone upgrade issue. The Verizon Forums is a peer-to-peer support channel in which users help other users. Because your issue appears to need account specific assistance from Verizon, I've moved your message to an employee monitored board, where a Verizon representative can assist you. You will be contacted by email, private message in the Forums and/or the billing telephone number on your Verizon account as soon as possible.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer that solved your issue as the accepted solution.

Crackled phone line and incredibly slow BB connect...

Hi
Im having serious issues with my phone line and BB connection. It has been ongoing for some time, roughly 6-8 weeks. The line becomes crackly with noise becoming so bad at times, you cannot hear the other person on the phone. This usually occurs in bad weather.
The BB line however turns on and off frequently, especially at night time. When it is connected the line is very slow and it takes forever to load anything.
Here is some info on our line.
Line state
Connected
Connection time
0 days, 1:44:14
Downstream
320 Kbps
Upstream
448 Kbps
ADSL settings
VPI/VCI
0/38
Type
PPPoA
Modulation
ITU-T G.992.1
Latency type
Interleaved
Noise margin (Down/Up)
19.1 dB / 20.0 dB
Line attenuation (Down/Up)
50.0 dB / 29.5 dB
Output power (Down/Up)
14.9 dBm / 12.1 dBm
Is there anything that can be done over the line or must an engineer be needed?

you need to report it to BT Faults on 151 with no mention of broadband in the call
You need to check that the noise is at the test socket to avoid any possible charges
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

Very slow connection speed, after phone line probl...

My catalogue of problems starts about a month ago. The phone line developed heavy interference and my Broadband connection kept dropping. This was diagnosed as being a fault with my HH 1.5. BT duly sent me a replacement HH3 which arrived about 3 days later. I installed the new hub, changed all the wiring and the filters for the new kit that came with the hub only to discover that the interference on the phone line was now even worse. It was so bad that at times you could not even hear what was being said on the other end of the phone, so an engineer visit was arranged.
A week later a BT engineer came and checked the line, sure enough there was a second problem and all the wiring from my house to the nearest telephone pole had to be replaced.
These problems had had a catastrophic effect on my connection speed and profile (I was getting about 500 kbps both up and down stream), so I dutifully reset the hub after the engineer had finished and waited for the line to stabilise.
14 days later and the upload speed had doubled, but the download speed is still unchanged at 570 kbps, about half the current upload speed. The line was a bit temperamental for the first few days but I have been able to maintain a solid connection for the last 4 days, current stats are as follows:
ADSL Line Status
Connection Information
Line state:
Connected
Connection time:
4 days, 04:42:16
Downstream:
574.3 Kbps
Upstream:
1.184 Mbps
ADSL Settings
VPI/VCI:
0/38
Type:
PPPoA
Modulation:
G.992.5 Annex A
Latency type:
Interleaved
Noise margin (Down/Up):
29.9 dB / 5.6 dB
Line attenuation (Down/Up):
19.6 dB / 12.8 dB
Output power (Down/Up):
18.3 dBm / 12.4 dBm
FEC Events (Down/Up):
279 / 615
CRC Events (Down/Up):
0 / 94
Loss of Framing (Local/Remote):
0 / 0
Loss of Signal (Local/Remote):
0 / 0
Loss of Power (Local/Remote):
0 / 0
HEC Events (Down/Up):
0 / 156
Error Seconds (Local/Remote):
0 / 42
There is only one active socket in the house, and the hub has been running from the test socket for the last week.
Solved!
Go to Solution.

The Hub is connected to the test socket. Disconnecting the ADSL feed to the hub has had no real effect (The upload speed increased marginaly but still no change to the download speed). Reran speedtest too, the new stats are:
FAQ
1. Best Effort Test: -provides background information.
Download Speed
0.44 Mbps
0 Mbps
0.5 Mbps
Max Achievable Speed
Download speedachieved during the test was - 0.44 Mbps
For your connection, the acceptable range of speeds is 0.1 Mbps-0.5 Mbps.
IP Profile for your line is - 0.51 Mbps
2. Upstream Test: -provides background information.
Upload Speed
0.94 Mbps
0 Mbps
0.83 Mbps
Max Achievable Speed
Upload speed achieved during the test was - 0.94Mbps
Additional Information:
Upstream Rate IP profile on your line is - 0.83 Mbps
ADSL Line Status
Connection Information
Line state:
Connected
Connection time:
0 days, 00:02:29
Downstream:
574.3 Kbps
Upstream:
1.2 Mbps
ADSL Settings
VPI/VCI:
0/38
Type:
PPPoA
Modulation:
G.992.5 Annex A
Latency type:
Interleaved
Noise margin (Down/Up):
29.9 dB / 5.9 dB
Line attenuation (Down/Up):
19.5 dB / 12.7 dB
Output power (Down/Up):
18.3 dBm / 12.4 dBm
FEC Events (Down/Up):
0 / 0
CRC Events (Down/Up):
0 / 0
Loss of Framing (Local/Remote):
0 / 0
Loss of Signal (Local/Remote):
0 / 0
Loss of Power (Local/Remote):
0 / 0
HEC Events (Down/Up):
0 / 0
Error Seconds (Local/Remote):
6 / 63

I am unable to get a phone line

What a fiasco! I am moving house and have tried x 4 to get a line installed. On every occasion I have spoken to a BT representative I have been assured that I will get a phone line installed, I've paid the amount £124.99 then I either get called back or sent an e-mail to say that my order has been cancelled!!!
The house is on a new development, 5 new houses built, all other 28 houses have phone lines. I even cancelled my sky TV and and thought about having BT vision.
Moving is stressful enough without having this hassle. BT advertise 'Come back' to what??????
Any suggestions re: having a phone line would be much appreciated.
ceriann

ceriann wrote:
What a fiasco! I am moving house and have tried x 4 to get a line installed. On every occasion I have spoken to a BT representative I have been assured that I will get a phone line installed, I've paid the amount £124.99 then I either get called back or sent an e-mail to say that my order has been cancelled!!!
The house is on a new development, 5 new houses built, all other 28 houses have phone lines. I even cancelled my sky TV and and thought about having BT vision.
Moving is stressful enough without having this hassle. BT advertise 'Come back' to what??????
Any suggestions re: having a phone line would be much appreciated.
ceriann
Hi Ceriann.
Hopefully a Mod can pick this up in the next couple of days and get this sorted.
I find the whole story a complete mystery, since I believed that all new developments had a phone line provided by one company or other, probably by BT who may then pass on the connection to another company in the area with all the costs etc.
It sounds like the people you are contacting are doing a thing that seems to be an ongoing problem - and that is "not listening to the caller". To any Mod, can this feedback be passed up the management chain to someone that will actually take on board and take note.
http://www.andyweb.co.uk/shortcuts
http://www.andyweb.co.uk/pictures

Worst Customer Service Installing New Phone Line

I am experiencing the worst customer service i've ever dealt with. First it took 3attempts to set up a home phone line. Verizon scheduled me between 8am-12pm the first time and came around 2:30, no one was there. Second time we scheduled between 12p-4p, they came around 8:30am. No one was there. Then they wanted to schedule again 5 days later. I wasn't having it, so they schedule next day (Sat) between 8am-12pm. Finally a technician came. He installed a new phone line. I needed this line for my son who was coming home on house arrest. All of this was explained to Verizon. The longer it took them to install the line, the longer he would be in jail. After the line was installed, my son came home on Friday, 7/3. Some time on Sat 7/4 The line stopped working, and 1am he was re-arrested because there was no phone service.Today is the 9th and still there is no service. I sat in my cvar this morning from 7:45am to 1:15 pm waiting for a technician who was supposed to be there between 8am-12pm. After numerous clls to Verizon, and numerous promises to call me back, no one ever called back, and the phone is still not on. I have never had a customer service experience as bad as this EVER! I am so glad I have my wireless with Sprint. I have Verizon FIOS at my home in Jersey, but this phone is in Philly. To top it off, one Verizon employee tells me today that The house arrest equipment doesn't work with fiber optics. Why wasn't I told this when I first ordered the service? I'm still waiting for a Verizon Supervisor to call. My last call, i was conviently disconnected while being transferred to a supervisor. Because of Verizon's no care attitude, now it will probably take another week before my son is released again.

Hi chopsuper,
Your issue has been escalated to a Verizon agent. Before the agent can begin assisting you, they will need to collect further information from you. Please go to your profile page for the forum and look at the top of the middle column where you will find an area titled "My Support Cases". You can reach your profile page by clicking on your name beside your post, or at the top left of this page underneath the title of the board.
Under "My Support Cases" you will find a link to the private board where you and the agent may exchange information. The title of your post is the link. This should be checked on a frequent basis, as the agent may be waiting for information from you before they can proceed with any actions. To ensure you know when they have responded to you, at the top of your support case there is a drop down menu for support case options. Open that and choose "subscribe". Please keep all correspondence regarding your issue in the private support portal.

New 7100i - Provisioning for Multiple Phone Lines

I just received a new 7100i from Nextel, and absolutely need support for two phone lines. Although Nextel assures me that this is supported, I'd expect this to be documented somewhere in the User Manual. It's not, and I am wondering whether Sprint/Nextel has lied to me yet again, or Blackberry has failed to fully document the features available. Can anyone tell me if two-line support is offered by this model? If not, it's going back to Nextel Monday morning...
If so, can I transfer both lines using the Nextel website, or do I have to use phone support via landline to accomplish the switch from my current phone?
Thanks a bunch!

hello,
the question you are asking is not a general Blackberry smartphone function and feature. I think you will have more answers if you post your question on the dedicated board for 7100i :
http://supportforums.blackberry.com/rim/board?board.id=Other_devices
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

Post moved Phone-line

Post moved to Phones board http://community.bt.com/t5/Phones/Phone-line/td-p/877422
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

BT do not provide or maintain the external network. This is done by Openreach who work for all service providers. BT do not get any special treatment.
Openreach would have given BT the next available appointment to do the work.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Phone Line Crackling

Hi
I ordered BT infinity and was installed in December, however since its been installed i have noticed my BT hub going offline and online several times a night which is infuriating. I noticed that the phone line now has a crackle on it, ive read a few things on the board that im going to try tonight plugging into the test socket and trying the phone on another port. however im wondering whether its normal practice when getting infinity that a new faceplate to be installed as part of the package. I was not given the option i was told that everything could be done without a site visit. I know my mother in law had a similar problem with broadband going off, she had to pay £35 to get someone on site to put a new faceplate on that apparently fixes this. Wondering why we have to pay an extra £35 that should be part of the job surely.
Ive been told no line faults by the chat (surprise surprise) its a bit funny, as i was with EE before and never had a crackle on the line.

you need to try quiet line test from test socket using new filter it is happening more often that infinity 1 is self install and even infinity 2 sometimes the master socket with filter should work ok
quiet line test dial 17070 option 2 best with corded phone if cordless dull hum normal
if still crackle report phone fault to 151
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Cut neighbours phone line

Hi
I have just had new fascia boards fitted.
On the boards was an old cable which looked about 40 years old.
After speaking to my neighbour who has lived here for about this time he said it was an old ntl line, which he also had on his fascia and my other neighbours. He said it was now disused and could be cut down.
So I cut I all down on my property and one of my neighbours.
Our other neighbour then came out saying her phone line was not working and the cable was the phone line.
She said she was going to to call BT to repair it at £114 per hour to repair.
She is an elderly lady who also has a police line connected for safety.
I cannot afford to pay for this repair to be carried out.
She called them out today and they said we had a very old shared line, each house these days is normally single served by BT. This means they have now got to dig the pathway up and install a single line to her property. They are not sure if she will be charged.
Surely if there is an old setup in place and this now needs updating to the current methods of installation this should be done by BT?
Can anyone advise?

valks1 wrote:
Yes but this was a genuine mistake, we thought it was an old ntl line. If we knew it was a bt line then we would have left it alone. I cannot afford to pay thousands of pounds for the path to be dug up a d neither can my elderly neighbour.
You may be able to make a claim on your household insurance, if it was an accident.
Its not unusual for a number of properties to be served by a multi-pair cable terminated on a distribution block.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Can I send a fax over the internet with no phone line from a Mac?

Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software products that may be mentioned in the topic below. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information below at your own discretion.
Yes. Several Mac compatible solutions exist to send a fax to a fax machine using the internet instead of a phone line:
eFax
Fossi
Faxzero and FaxSV
ClickFax
4sightfax
Note: None of the solutions here have been tried by the author of this tip. If you want to know how well it might work with your system feel free to ask on the Using Mac OS forums of the board closest to your operating system.
Do you want to provide feedback on this User Contributed Tip or contribute your own? If you have achieved Level 2 status, visit the User Tips Library Contributions forum for more information.

MIG,
What is the URL to the website? Is it an FTP site? The articles you referenced are for specific transfer protocols. If the stie you're trying to get to doesn't follow these protocols, then you'll get the error you're seeing. You may have to use ActiveX to control IE and download the files programmatically.
Chris C
Chris Cilino
National Instruments
LabVIEW Product Marketing Manager
Certified LabVIEW Architect

On-board mike output to phone line?

Similar Messages

Maybe you are looking for