On fcp6 - all of a sudden my titles and images disappear when timeline stops. Can't edit or see titles.

titles and stills work fine in playback, but disappear when timeline stops. Can't edit titles. Can't find how to bring things back. restarted FCP and Mac.

Second image shows outline of title over background image.  All images are .jpg finished in Photoshop as I normally do.  They worked fine during the first half hour of editing.

Similar Messages

  • Why all of the sudden does my cursor arrow disappear when not moving it

    Just today my cursor diappears when I stop moving it whether I have my finger on the pad or not. Is this a firefox thing, cause I downloaded a Firefox yahoo toolbar today before noticing this.

    i am having the same issues (maybe). I have the iPhone 3G S and my phone (out of no where) stopped responding to 3G signals. the edge network works fine. i called AT&T and they said that everything on their end was fine. i called apple and we tried everything (updating, restoring, turn on/off, etc). then i went to the apple store to get it replaced and because that 1 of 2 water sensors was a little red my warranty was voided. the people in apple tech support (on the phone) came to the conclusion that it may be that my 3G antenna stopped working. your best bet is to try and get your phone replaced via warranty. i, on the other hand am going to try to fix the problem manually. i'll let you know what i did to fix/break it. lol.

  • All of a sudden my itunes wont come up when i hit the desktop icon. un and re installed many times, tried new users, it finally gave me "you need to reinstall sqmapi.dll " im a noob and i have know idea what that is or where i can get it. i cant open any

    all of a sudden my itunes wont come up when i hit the desktop icon. un and re installed many times, tried new users, it finally gave me "you need to reinstall sqmapi.dll " im a noob and i have know idea what that is or where i can get it. i cant open any file or library that has anything to do with itunes except safari and quicktime are fine. im about to pull out whats left of my hair.

    Okay, that's got one thing ruled out at least.
    Can you check something for me, big? I'd like to see if iTunes launches with the Bonjour Service disabled.
    In your Start menu, right-click Computer and select "Manage".
    Expand "Services & Applications".
    Open "Services". (Perhaps maximise the screen to better see what's going on.)
    Right-click the Bonjour Service and select "Properties".
    In the General tab, set the Startup type to "Disabled":
    ... and click OK.
    Restart the PC and try launching iTunes. Does it open this time?

  • Can't locate email content? All of a sudden my email content has disappeared from inside MacMail? The actual emails are coming through but I am unable to view them as the area is just left blank! Nothing has been done to have changed this?

    Can't locate email content? All of a sudden my email content has disappeared from inside MacMail? The actual emails are coming through but I am unable to view them in the content area! Nothing has been done to have changed this?

    Please read this whole message before doing anything.
    This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
    Step 1
    The purpose of this step is to determine whether the problem is localized to your user account.
    Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
    While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    Test while logged in as Guest. Same problem?
    After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
    *Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
    Step 2
    The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Please take this step regardless of the results of Step 1.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

  • I had to get my phone replaced, I did back it up. However when I went to sync my itunes to my phone, now ALL my music is all of the sudden not able to be found. As you can imagine I'm quite ******. Anyone know anything of this?

    I had to get my phone replaced, I did back it up. However when I went to sync my itunes to my phone, now ALL my music is all of the sudden not able to be found. As you can imagine I'm quite ******. Anyone know anything of this?
    I also updated my itunes a couple days ago when i backed up my phone - could it have been that?

    music is apart of a back up. however if you did not transferyour purchases before doing the back up you will have to re download them. to do so sign into itunes, on the right hand side under quick links you will see purchased. click on it and go to the music tab. all of your music will be there you will see a cloud next to them with an arrow pointing down that is where you download them there may also be an option to download all. you can do the same for any apps that you may have purchased also. after they have downloaded plug your device in and sync them back to the device. hope this helps

  • I am using an early 2008 MacBook Pro and am having issues with it deleting text on its own (in word, emails, etc.). As I am typing it all of a sudden starts deleting and I can't stop it. What can I do?

    I am using an early 2008 MacBook Pro and am having issues with it deleting text on its own (in word, emails, etc.). As I am typing it all of a sudden starts deleting and I can't stop it. This happened once before and it was due to a buldging battery pressing on the track pad. I checked the battery and it appears to be fine. What can I do?

    Please read this whole message before doing anything.
    This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
    Step 1
    The purpose of this step is to determine whether the problem is localized to your user account.
    Enable guest logins* and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up guest users” (without the quotes) in the search box. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
    While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    Test while logged in as Guest. Same problem?
    After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
    *Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
    Step 2
    The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
    Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
    When you see the gray Apple logo, release the shift key.
    If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.  The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    *Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode.
    Test while in safe mode. Same problem?
    After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

  • HT203163 All of a sudden I'm getting  a message Itunes has stopped working Data Execution prevention has closed Itunes what is causing this now, never had an issue until yesterday

    All of a sudden I'm getting a message Itunes has stopped working Data Execution Prevention has closed Itunes. What is causing this now, never had an issue until yesterday

    please sombody help me, apple support are no help, the shop are no help, the only thing i havent tried is delete everything on my laptop and put it back to factory, which is my very last resort

  • I use lightroom with the soft proofing feature for my printing. I used to make a copy proof, but all of the sudden something changed, and even if I'm on the copy in the developing mode it prints the original. Also, If i chose a file that was already in li

    I use lightroom with the soft proofing feature for my printing. I used to make a copy proof, but all of the sudden something changed, and even if I'm on the copy in the developing mode it prints the original. Also, If i chose a file that was already in light room to print, even though I have the chosen file up in the developing mode, it will instead print the most recent file that I added to lightroom. If found a way to work around these problems, (check make this the copy in the soft proofing, and copy my settings and delete and reload the old files) but it's a slight hassle and it didn't use to do this. Not sure why it changed. Could I have accidentally changed a setting?

    See
    iOS: Device not recognized in iTunes for Windows
    - I would start with
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or              
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
    - Then do the other actions of:
    iOS: Device not recognized in iTunes for Windows
    paying special attention to item #5
    - New cable and different USB port
    - Run this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Also see:
    iPod not recognised by windows iTunes
    Troubleshooting issues with iTunes for Windows updates
    - Try on another computer to help determine if computer or iPod problem

  • I recently downloaded the 5.1.1 and all of a sudden the contact icon has disappeared. I can still access my contact list through the phone icon, but I want the contact icon back. How can I reinstall it?

    I recently downloaded the 5.1.1 and all of a sudden the contact icon has disappeared. I can still access my contact list through the phone icon, but I want the contact icon back. How can I reinstall it?

    You can't delete it.  Look on all your screens and inside all your folders.  If you still can't find it go to Settings>General>Reset>Reset Home Screen Layout.  This will restore the home screen to its original configuration but may move other apps around to do so.

  • When I'm browsing on Safari, it all of a sudden cuts off and the screen turns blue. It turns blue for about 5 seconds and then returns to the desktop screen. Any idea what's going on?

    When I'm browsing on Safari, it all of a sudden cuts off and the screen turns blue. It turns blue for about 5 seconds and then returns to the desktop screen. Any idea what's going on?

    Anna...
    Could be the graphics card.
    Run the Apple Hardware Test

  • HELP! Safari 5.1.10 on OSX 10.6.8: All of a sudden in the last few days, when Safari is launched it is trying to load hundreds of pages at the same time, hanging up the whole computer

    HELP! Safari 5.1.10 on OSX 10.6.8: All of a sudden in the last few days, when Safari is launched it is trying to load hundreds of pages at the same time, hanging up the whole computer. What the heck happened?

    I misunderstood the settings. A few days ago I had tried to set it to open a specific page upon launch, and set "New windows open with: Bookmarks" instead of ":Homepage"

  • HT4515 why are my text messages all of a sudden in green and do not say delivered?

    why are my text messages all of a sudden in green and do not say delivered?  Also for the first time since I obtained the phone I went to use the headphones and the insert to headphones is very loose and I can connect for about 10 seconds then nothing, I do believe it is the jack that inserts into the phone or the phone receptacle is bad or the headphone piece that goes into the phone is bad it is not working is the main issues.  Thank you

    I should also mention we have 2 other iPhone users and 1 Samsung s5 user in my home not having the same problem.

  • All of a sudden my podcasts are 'frozen' . . . I can't select them and the text is gray, not black.

    I'm traveling and count on my iPhone 4S for entertainment. But all of a sudden my podcasts are 'frozen' . . . I can't select them and the text associated with them is gray, not the usual black. OS 6.1.3
    Any ideas? I suspect a setting somewhere, but can't find it or figure it out.
    The podcasts on my laptop respond and play just fine.
    Thanks for any help.

    On the padcast playing screen on the right side below the scrubber bar is the playback speed icon.  It can say 1/2X, 1X or 2X, those are the playback speeds. Tap the icon to change speeds.

  • When I do a google search, why all off a sudden is it sending me to Bing? How can I fix this?

    When I do a google search, why all off a sudden is it sending me to Bing? How can I fix this?

    Because you selected Bing? Check, click & hold the triangle, and select Google.

  • TS3772 why all of a sudden i need to download quicktime when its already working

    why all of a sudden i need to download quicktime when its already working

    Since you are running Lion, you will not see Exposé & Spaces - they don't exist in Lion.
    Their function, that of multiple desktop arrangements, has been replaced by Mission Control.
    You may have accidentally set up Mission Control; or inadvertantly activated it. The latter is easy to do if you're using a Magic Mouse - a two-finger double-tap (not click) on the mouse will engage Mission Control.
    The two-finger double-tap can be deactivated in System Preferences > Mouse > More Gestures. Uncheck the Mission Control item, and it won't respond that way to a two-finger double-tap again. You can then still access Mission Control via its icon in the Dock.
    To get rid of extra desktops in Mission Control, activate Mission Control. Then hover the cursor over the desktop you'd like to remove; a circled-X will appear in one corner of that disktop - click it and that desktop will be removed. Any open program using that desktop will then be moved to another, yet-available desktop.
    There is a control pane for Mission Control in System Preferences. Selecting that will allow you to make some settings re how Mission Control behaves, including the setting/clearing of a hot corner.

Maybe you are looking for

  • Setting Crystalviewer for all users in CMC

    I am trying to setup Crystal Reports server 2008 VI for my organization. One of the requirement is to disable the Preferences in inoview and set the crystal report viewer to the Web ActiveX control for all users. I was able to disable the preference

  • A suggestion for anyone with discoloration on the rist area!

    I just want to let people know the Marware MacBook protection package is great for the wrist area of your MacBook. I had my cover replaced for discoloration 3 times and that was one to many times! So... I was in the Apple store today and I saw the Ma

  • Regarding Packaged function...!

    Hi, i have a packaged function which i am trying to use in my report query.... i am passing 2 params for this function..... one is report parameter and the other one is a col in the select query.... so i need to get rows returned based on the condito

  • PO Flip to invoice: In SRM

    Hi Gurus Would like to know whether PO flip functionality is available in SRM i.e. an invoice would be posted as soon as we create a PO. Looking fwd to your replies Harsh

  • Disoverer Business Area and Timestamp

    I'm using BI Discoverer 10.1.2.1 and when I create a new business area any Timestamp fields are not imported. They are just not there. I switched one field to a Date and it imported fine. Is it the case that BI Discoverer 10.1.2.1 can't cope with Tim