On Ipod touch connected to wifi router Belkin App Store does not work
I have a wifi router Belkin.
My Ipod touch connects to it, and Safari works properly.
When I try to use App Store, screen shows "loading" (I have Italian settings and original message is "carico") and never connects....
I suspect there are wrong settings in mi wifi router, but I do not what to correct
Conection to other wifi router is ok, just my Belin at hoome is wrong......
Thanks
Can't connect to the iTunes Store
Best Fixes for ‘Cannot Connect to iTunes Store’ Errors | iPad Insight
Similar Messages
-
My airport express and wireless airplay speaker are connected to WIFI, but airplay and homesharing are not working...what to do? Everything was working fine until about two weeks ago, all of the sudden airplay has disappeared from the iphone, itunes on the laptop, and the apple remote for iphone. I have restarted the router many times, re-setup the airplay speaker and the airport express and booth are showing as being properly connected to the router when I log into the router IP address. I was on the phone with Apple support for 30 minutes they blames verizon, got on the phone with verizon and they stated the settings were all correct and compatible with apple, got back on the phone with apple and they again are blaming verizon and trying to get me to get an airport extreme because that would fix the problem...any suggestions, please!
There are three Airport resets, soft, hard and factory default. It would probably be beneficial if you tried each one in sequence. Actually, you could jump to the factory default reset if you don't mind reconfiguring from scratch.
-
The button on my Ipod Touch (the big one just below the screen) will not work when I press it. Nothing happens, when before it would wake my IPod out of sleep mode, and exit out of programs I was using (ex. ITunes or Safari to main screen) . Now, no reactions. When I press the button, it appears to be more indented then it was before. What should I do? Do I need to get it fixed or replaced, or is this a problem I can fix on my own? Whatever it is, I really need some advice. Thanks in advance.
Try:
fix for Home button
iPhone Home Button Not Working or Unresponsive? Try This Fix
- If you have iOS 5 and later you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
- If not under warranty Apple will exchange your iPod for a refurbished one for:
Apple - Support - iPod - Repair pricing
You can do it an an Apple store by:
Apple Retail Store - Genius Bar
or sent it in to Apple. See:
Apple - Support - iPod - Service FAQ
- There are third-party places like the following that will repair the Home button. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens -
my ipod touch 4 camera icon has disappeared and even does not open in any applications.. have restored it and its running on 4.3.5 not jailbroken pls help??
it does not even appear in the search barIs the Camera turned on in Restrictions? Go to Settings>General>Restrictions.
-
my iphone 5 and ipad 4th generation having the same problem of connecting to wifi, cannot load app store and cannot connect to itune store... help !!
Try this:
1. Close all apps in the Task Bar. Double-click the Home button and hold apps down for a second or two. Tap the minus sign to close app.
2. Hold the Sleep and Home button down until you see the Apple Logo. -
Hi there, I have a problem with my iPod Classic (from 2009). Everytime I connect it to my computer (Windows), iTunes does not work anymore. Music is automatically deleted on my iPod. Any suggestions please?
Thanks, for info, iPod Classic is a slower machine compared the Nano, unfortunately, if you read these discussions, majority of the freezes involved iTunes 10. Although if might be just slow and some impatient user just disconnect the iPod ands cause more problems. ( Yes I also did that but safely by doing a iPod Hard Reset, before disconnecting).
Here is the Apple support article that may help you.
http://support.apple.com/kb/TS1717
or my usual solution for Windows Users.
Antivirus has a tendency to freeze iTunes sync Operation with iPod Classic, causing a timeout, which corrupt your iPod filesystem, so when iTunes can't read the iPod, it is pointing to this problem. Other causes is when your iPod hardisk is dying, or your battery is dying causing hardisk crashes.
My suggestion.
Connect your iPod to the PC and run chkdsk, to fix any iPod diskerror, then disconnect it, after chkdsk complete.
Disconnect your PC from Internet. (just to make sure no nasties creep into your system while you syncing.
Stop the Antivirus program
Connect your iPod to the PC, using a high speed USB 2.0 port at the back of your PC, do not use any USB Hub.
When iTunes Open up, Restore your iPod please, this is for iTunes to map correctly, to fix the corrupted filesystem.
When Restore complete, eject the iPod and reconnect again.
Sync your ipod, preferably manually Manage in small batches and disconnect after every batch, to check that all is well.
When all sync is complete, and iPod disconnected, start back your Antivirus and connect back the Internet.
Good Luck! -
I have an ipod touch. Itunes recognizes it. However, it does not show up in "My Computer". Please let me know how to correct this. Thanks.
Not sure that it will show up.
Why do you want to see it in my computer? -
the wifi turn-on/off feature does not work on my iphone... it's stuck on off and won't turn on. Does anybody know how to fix it?
Hello khalidbadir,
I would be concerned too if my touchscreen was not responding on my iPhone. I recommend following the steps in this article to address an unresponsive touchscreen:
iPhone, iPad, iPod touch: Troubleshooting touchscreen response
http://support.apple.com/kb/ts1827
Thank you for using Apple Support Communities.
Best,
Sheila M. -
How do I fix my iPod I updated it to iOS 6 and now iTunes and the App Store will not work?, How do I fix my iPod I updated it to iOS 6 and now iTunes and the App Store will not work?
App Store Failure / Updates White Screen
Tap Settings > General > Date and Time > Set Automatically > Off. Set the date one year ahead. Then try to access the App Store.
It may be a connection issue. Try changing your DNS settings to Google’s open DNS by tapping Settings > Wi-Fi >, tap the blue arrow next to your current Wi-Fi network, and then tap the “DNS” field and enter the DNS servers; 8.8.8.8 (Google’s Public DNS, 8.8.4.4 also alternate). -
iphone 4: Home Button Not Working. The home button only works when it is connected to iTunes, once i disconnet it does not work, i have tried a restore to factory settings but it still is not working. Any suggestions?
Apple, as I said, does not repair your iPhone. All hardware service issues are handled by replacing the unit. So they can't handle the home-button issue without also addressing the issue of the cracked screen, for which they'll almost certainly charge you. But you can make an appointment at an Apple Store or call Apple tech support and plead your case.
Regards. -
After I updated lion to 10.7.4, app store does not recognize my ID APPLE and it unable to connect me to app store in order to update/download apps? What have I to do? I have the same problem with mac mini e mac book air. Please help me!
Your advice did not help me. I also installed 10.7.4 combo but the situation is the same.
my internet connection is ok, mail is ok, but app store after 3 resets does not recognize my ID and it says "connection is not possible". Why? I have the same problem in both my mac mini late 2009 and mac book air 2010? Is it a problem of 10.7.4 update? I have to solve this problem and how can i return to 10.7.3 if my last backup was not with 10.7.3???thank you for your kind collaboration... -
How can I get my itunes onto my new laptop? Do I need to download itunes again or can I just copy it? My ipod classic has since been soaked in water and does not work so I cannot copy from there. Can anyone help?
You should copy everything from your old comptuer to your new one.
-
Connecting Wahoo Blue HR with iPhone 5 does not work, tried everything possible
Connecting Wahoo Blue HR with iPhone 5 does not work, tried everything what I could find in the interenet as solution??????
IPhone 4s, iOS 7.1.1: iphone can't connect to wahoo HR BT4.0 sensor :((( Wverything worked fine with iOS 6 !!!
-
following hard drive failure on iMac running Maverick I have recovered from TimeMachine backup but now app store does not connect. All other internet connections normal. Does anyone know of a fix?
Also mail not loading. The error report suggests that I look for updates from the app store?http://www.apple.com/support/mac/app-store/contact/
-
After upgrading to OS 10.8, my Mac App Store is not working. It says: Cannot Connect To The App Store. Kindly Help
Also having that problem - I checked and I am connected to internet (can access other websites or other pages in Apple's website), can login from Snow Leopard (10.6.8) with Mac App Store there, but if I use the (external) drive with ML to start up, no go.
I can get to the "Featured"/initial MAS page, and tried going to the login from there, but same problem as Mitoshacer.
In my case, MacBook Pro (2.66GHz, 8GB RAM, 500GB external with ML - vs. 320GB internal drive with 10.6.8), March/April 2009 model. Have done searches for the problem online, but nothing shows up (except some for older OS X versions).
Maybe you are looking for
-
How can I display East Asian characters in MediaSour
I am using Windows XP SP2 Chinese Traditional (Taiwan) edition, although I li've in the US. My system setting is by default Chinese Traditional, and I have enabled East Asian language support for Chinese, Japanese, and Korean. However, Creai've Media
-
HI All, I'm new of this forum but I really hope you could help me solving the problem I have to connect Web Services and midlets. Somehow my configuration works with some services I've found online but when I invoke very simple services deployed on m
-
My 3G is not work from last 2 weeks
I'm using 3G last one year. But thts nt work properly from last 2 weeks ... So pls help me sir
-
i wrote a code to measure temp, pressure and RPM of my experiment. the RPM signal input to labview is a puls (open collector) as soon as i start my motor (3phase) with a motor drive all my reading start reading rabbish! i have tried to change the po
-
why not invent a tablet with a i5 or i7 reader, DVI, USB ... who would wear the name of ipac or imad