On some pages the text from more than one paragraph stack up on top of each other, like writing something then writing something else on top of it.
On some pages the text from more than one paragraph stack up on top of each other, like writing something then writing something else over the top of it. Some pages will run text and pictures together, like a car rear-ending another or a train pile up. Other pages will cut an image or text short, i.e. it will display a portion of the top of the image or text but not the rest. This happens on Amazon for example, the section where it says "Customers who looked at this also looked at" will allow only a certain amount of the upper portion of the description immediately below the picture of the product but below that section everything is fine until I get to another section displaying more products and their descriptions and then it cuts the bottom portions off again. I've noticed this behavior mostly in the sections with product photos, the text sections seem okay. YouTube also displays this behavior. It's even doing it on this page right now. Below this box I can read "The more information you can provide the better chance your question will be answered " , but directly below that in the next sentence I can see the start of it with "Troublshootin" and the "Automatically Add" in a green field covering the "g". The next clear text is "A window will open in the top corner. Click Allow, and then click Install. If the automated way doesn't work, try these manual steps." I tried turning of pre-fetching, clearing history, cookies, and cache, scanning for malware with Avast and Windows Defender all to no avail. It began when I upgraded from dial up to DSL via AT&T Uverse. I have a Motorola NVG510 modem. The modem was replaced an hour ago along with new dedicated lines and DSL/Phone splitter from the box by an AT&T technician to make sure my incoming lines were up to par. He ran a connection test and verified everything is up to standards. IE does not display this behavior. I am running Firefox20.0.1 and all previous versions have acted the same way since I upgraded to DSL about 3 months ago.
If you have increased the minimum font size then try the default setting "none" in case the current setting is causing problems.
*Tools > Options > Content : Fonts & Colors > Advanced > Minimum Font Size (none)
Make sure that you allow websites to choose their fonts.
*Tools > Options > Content : Fonts & Colors > Advanced: [X] "Allow pages to choose their own fonts, instead of my selections above"
It is better not to increase the minimum font size, but use an extension to set the default page zoom to prevent issues with text not being displayed properly.
You can use an extension to set a default font size and page zoom on web pages.
*Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/
*NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/
Similar Messages
-
How to display(binding) values in the table from more than one node?
Hi,
I have two nodes (TRIPS & AMOUNTS)in the context. How to bind these values into the table control?
When i bind second one, first one is getting replaced.Hi Mog,
Of course it is possible to create a table from attributes of more than one node, and in some cases this is still necessary, but you have to do this the hard (manual) way.
If you have a table control, have a look at the properties and the elements belonging to it.
First of all, there is the property "dataSource", which binds to a multiple node (let's name it TableRootNode). This means that for each element of THIS node, one row is created. In each row the data of exactly one element of this TableRootNode is displayed.
Then you have columns in this table. Inside of the columns there is a header and an editor. The editor is the interesting part.
Normally the primary property of this editor is bound to an attribute of the TableRootNode. Then everything works as expected. If it binds to an attribute of a subnode (SUB) of TableRootNode, then in row i the data of the subnode of the i-th element of TableRootNode is displayed. There is no need for SUB to be a multiple node, but it must not be a singleton.
If you bind a property of the editor to an attribute, which does not lie in the subtree of TableRootNode, then you will see the same value in each row.
Now it depends on the structure of your context. Take the node, which is relevant for the change in each row (I assume it is TRIPS) and bind the table to the node as you are used to. Then for each additional column, you have to create a new column in the tree, create a new header element with a title and a new editor (e.g. textview or inputfield) and then bind the right property of the editor to the corresponding attribute in node AMOUNTS).
If these 2 nodes do not have parent-child-relationship, the tip to create a new node, which consists of the attributes of both nodes is the only solution.
Ciao, Regina -
How can I transfer the mailboxes from more than one user account to Thunderbird?
I've recently transferred my email to Thunderbird, having previously used Outlook Express (which I still have installed, but don't use). On OE I had two user identities, each with its own set of mailboxes, sub-mailboxes and address book. Thunderbird has copied across both identities, creating a new set of mailboxes for each, and has also copied both address books (and amalgamated them), but has only copied one of the old sets of mailboxes. Is there a way I can get it to copy the others? I noticed some reference to a limit on the number of messages - I did have rather a lot in the OE account from which it hasn't copied the messages! Could that be the problem?
have you heard about Thunderbird profiles? A profile change requires a restart unlike OE and it's change of identities. But multiple profiles is basically functionally identical to the OE identify. Two completely separate set of accounts and address books. See http://kb.mozillazine.org/Profile_manager
There is also an add-on https://nic-nac-project.org/~kaosmos/index-en.html#profname which make a menu entry to allow you to set te profile to be opened next time Thunderbird starts.
I am guessing crashing into the already existing outlook import folder made the mail an issue. So if you rename the outlook express import folder to something else the import may well go as planned. -
Can takes from more than one track be comped at the same time?
Greetings,
I know that this question has been asked recently in this forum (http://discussions.apple.com/thread.jspa?messageID=9527542�), but I don't think that the respondents completely understood the question... Or perhaps I did not understand the suggested solutions to the problem. I will ask the question in a slightly different way...
Suppose that I record guitar with 2 microphones (a pickup mic, and a room mic). The first microphone is recorded onto track 1, the second microphone is recorded onto track 2. Multiple takes are done in this manner. When it comes time to comp the tracks, how is it done? Can the takes from more than one track be comped together at the same time? I have tried to do this by grouping both tracks together, but it does not work.
Any suggestions?
Thank you.You had the right idea grouping the tracks together. You must make sure that in the group settings, the box titled "region selection (edit)" is checked. This will allow you to make the same cuts (or in this case, swipes) on all regions in the group.
-
while texting with more than one person at a time the incoming texts scrolls to top of conversation. anyone having this issue?
I've heard claims it can be done, claims some have done it, and claims that it didn't work for them. This thread is interesting, some indications it should be possible, complaints that it didn't, and also an interesting work-around:
"How do I text message multiple people at once?"
http://discussions.apple.com/click.jspa?searchID=-1&messageID=4822260
You can ask Apple for iPhone changes via this link:
http://www.apple.com/feedback/iphone.html
Though if you're requesting hardware changes for iPhone v2 you may want to wait a week (or a month?)...they're probably going to be inundated right now by requests for software changes to the current iPhone.
(If this has answered your question, please mark your original post as answered) -
I have a new iPhone 5 from T-Mobile. I can send simple texts just fine. However, I have to turn off wi-if and enabler cellular to send texts to more than one person or to attach a picture. Is there a way around this?
First thing to try is to reset your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider should one appear until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.
-
Can I have in one iphone 5 music from more than one itunes accounts? My daughter and I have our music in the same pc. She and I have iTunes accounts. I have not been able to load in my ophone with my itunes acct music that she purchased in her account. I have not been able to do this. Thanks
iTunes Match is not sharable across Apple IDs. The best way to get the music on her iPad is to leave hers signed into her Apple ID on the iTunes Store and sync via USB.
-
How to concat columns from more than one record?
I have a function that takes an Oracle long and returns it as a varchar so that I can use it in the Microsoft world. My problem is that the SELECT returns more than one row (which is valid) and I need the Long fields to be concatenated into the one varchar returned. Currently I get an error saying more than one record is returned. This is my function:
CREATE or replace function m4owner.Get_Request_Text
(av_REQUEST_ID varchar2, av_REQUEST_LINE number, av_TEXT_LINE_CODE varchar2)
RETURN varchar2
IS
long_var LONG;
BEGIN
SELECT TEXT INTO long_var
FROM M4OWNER.REQUEST_TEXT
WHERE REQUEST_ID = av_REQUEST_ID
AND REQUEST_LINE = av_REQUEST_LINE
AND TEXT_LINE_CODE = av_TEXT_LINE_CODE;
return long_var;
END;CREATE or replace function m4owner.Get_Request_Text (av_REQUEST_ID varchar2,
av_REQUEST_LINE number,
av_TEXT_LINE_CODE varchar2) RETURN varchar2 IS
long_var LONG;
BEGIN
for t1 in (SELECT TEXT FROM M4OWNER.REQUEST_TEXT
WHERE REQUEST_ID = av_REQUEST_ID
AND REQUEST_LINE = av_REQUEST_LINE
AND TEXT_LINE_CODE = av_TEXT_LINE_CODE) loop
long_var := long_var || t1.text;
end loop
return long_var;
END; note: untested -
Need to download JAR files from more than ONE HTTP-server ?
Hello,
We have a need to download JAR files for an application, from more than ONE HTTP-server, i.e. any specified HTTP-server in an extremely secure network.
Does a solution exist for this requirement ? Is it possible to design a solution our selfes for this problem ?
Best Regards
PeterWe have a need to download JAR files for an
application, from more than ONE
HTTP-server, That can be done using the extension element
from within the resources element of the main JNLP.
http://java.sun.com/j2se/1.5.0/docs/guide/javaws/developersguide/syntax.html#resources
The extension element should refer to another JNLP
(on the other site) that refers to the Jars. The jar files
in any such (foreign) JNLP need to be signed, and the
JNLP files should declare itself as a <component-desc>.
For any level of detail on using extensions/components,
download the spec. mentioned in the second paragraph
of that section linked above. Unfortunately I can find no
web browsable form of the information.
Here is an example though..
http://www.javasaver.com/testjs/jws/04/glclock.jnlp
This (sandboxed) screenaver demo comes off my
javasaver site. It refers to the JOGL API via an
extension element in the JNLP, that points directly
to the JOGL site. You might notice the security
warning that is produced mentions..
Name: JOGL
Publisher: sun microsystems, inc
Source: https://jogl.dev.java.net
..i.e. any specified HTTP-server in an
extremely secure network. I do not know about an extremely secure network,
but if it is OK to launch a normal JNLP for an
application with a 'main()' from the server, I guess
it should be OK to launch extensions off it - you
might need to set up some tests. -
How do I "Select All" in a Pages document. I would like to copy and paste more than one paragraph at a time.
I just tab and hold untill the loop shows then let go and I get the menu with select all in it
-
Get the data with more than one of the desired value
Hi,
I need to pull the records with more than one value of 'Other' on the delivery days fields.
The delivery fields are mon,tue,wed,thu,fri and sat that tells the where the item will be delivered. The value can be Home, Work, or Other.
Here is the Sample data:
cust_id: 123
item: newspaper
mon: Home
tue:Work
wed: Other
thu: Home
fri: Other
sat: Other
And here is my query so far.
select
cust_id,
item,
mon,
tue,
wed,
thu,
fri,
sat,
sum(case when (del_mon = 'O' or del_tue ='O' or del_wed ='O' or del_thu ='O' or del_fri ='O' or del_sat='O') then 1
else 0 end) as day_ctr
from customer
Could you please help me with the right formula I need to get this?
Thank you in advance..First
DESC customer
Second
Can you explain what you are trying with
sum(case when (del_mon = 'O' or del_tue ='O' or del_wed ='O' or del_thu ='O' or del_fri ='O' or del_sat='O') then 1 else 0 end) as day_ctr
Third
Usually it's helpful a example of the result you want...
Perhaps you want this
select DECODE(mon,1,(select distinct mon from customer), 'OTHER') mon,
DECODE(tue,1,(select distinct tue from customer), 'OTHER') tue,
DECODE(wed,1,(select distinct wed from customer), 'OTHER') wed,
DECODE(thu,1,(select distinct thu from customer), 'OTHER') thu,
DECODE(fri,1,(select distinct fri from customer), 'OTHER') fri,
DECODE(sat,1,(select distinct sat from customer), 'OTHER') sat from
select
COUNT(DISTINCT mon) mon,
COUNT(DISTINCT tue) tue,
COUNT(DISTINCT wed) wed,
COUNT(DISTINCT thu) thu,
COUNT(DISTINCT fri) fri,
COUNT(DISTINCT sat ) sat
from customer
) -
Reporting from more than one infocube and also from multiple ODS
Hi all,
Someone please help me in these issues.
How can we do reporting from more than one cube ( if data in all the cubes are required, but only a few fields from each cube). And how to do the same with more than one ODS.
Thanks in advance,
SekharHi Sekahr
Can u jus create a multiprovider.
Before creating the multiprovider..Just check the Common charcterstics avilable in
all the ods based on that give the mapping ..
and then once u have completd the creation of multiprovider execute the same in
the tcode <b>Listcube</b> and then create the querys as per the user thats it...
Regards
R M K
Assining points is the only way of saying thanx in SDN *** -
JDBC-XI-FILE scenario. How to extract data from more than one table in JDBC
Hi,
I was asked a question like in JDBC-XI-FILE scenario........ How to extract data from more than one tables (i.e from JDBC system) ?? What is the logic to do the same ??
I am not sure whether this is a valid question..........but any help in this regards is highly appreciated.
Regards
KumarHI,
Yes it can be possible ,please see the following links
JDBC Receiver with Oracle Stored Procedures
configuring jdbc adapter with multiple tables
RFC -> XI -> JDBC Scenario Updating Multiple Tables
/people/alessandro.berta/blog/2005/10/04/save-time-with-generalized-jdbc-datatypes
JDBC Adapter multiple Selects
https://www.sdn.sap.com/irj/sdn/advancedsearch?query=jdbc%20with%20multiple%20tables&cat=sdn_all
Regards
Chilla.. -
Creating Pages in PeopleSoft with more than one HTML Form
Hi,
We've a requirement to create a page in PIA with more than one HTML form.
As per PBooks - "The page being developed cannot be built using PeopleSoft Application Designer.
An example of this is a page that requires more than one HTML form.
PeopleSoft Pure Internet Architecture places the entire page inside of a single form tag, so no other HTML form tags can be added.
In this case the requirements of the page can't be met by pages created in PeopleSoft Application Designer, so use IScripts instead."
If someone can share his/her experience, It Would be of great help to me.
-Thanks!!Take a look at my IScript postings. Let me know if you still have questions after reading these blog posts.
-
My itunes library has organically grown from more than one itunes account (all paid for by me) but all now on a separate computer. If I upgrade to iTunes match will I have to pay for each account or just once, for the computer?
No. Provided the computer that you use to upload / match your Songs is authorised to play all of the Songs all works well - once complete you can download Song files that will play on your libraries / other computers without each computer having to be authorised.
Maybe you are looking for
-
Hello If Yal Reading This My Macbook Air Ain't Working. In Three Ways!!!!!!!!!!!!!! 1. My Sound 2. Face Time 3.Battery Sound isnt working loudly when I do spanish lessons My Face Time cancels when I connect to another person And when I charge my MacB
-
How to print different colors of Strings into JEditorpane?
How to print different colors of Strings into JEditorpane? Can any body give me answer ...
-
When I click on itunes it pulls up an apple player. How do I get it back to itunes.
Yesterday I was using ITunes just fine on my school computer. Today when I turned it on and clicked on Itunes it pulled up a apple mini player. I X it out and tried again from the program list. It pulled up the apple player again, no itunes. Wher
-
BI Services and Xcelsius Caching
Does BI Services use Xcelsius Caching?? Is BI Services faster than Live office?? Thanks In Advance
-
Audio plug ins (stillwell audio) appear even after deleted
I had some stillwell audio plug ins, they didnt ned them anymore so i deleted them, did a system search and deleted all the files that have to relate to stillwell plug ins, then went on to ableton and logic(I installed logic after the start of the iu