On the initial set up for apple tv it just sits there trying to set the date and time . it is a wireless setup and the ipaddress and router address is correct . I can't get by this screen
On the initial set up for apple tv it just sits there trying to set the date and time . it is a wireless setup and the ipaddress and router address is correct . I can't get by this screen. The setting is on automatic and I have picked a city in my time zone yet it still tries to set a time and date but fails.
thanks
Make sure router is up to date. Try ethernet to rule out any wifi issues. Reboot ATV and router.
Similar Messages
-
successfully loaded ios7 to iphone 4s.
now iphone asks me to agree to terms and privacy, then it locks up and won't accept my "agree."
goes in a loop and can't get past this screen. Pls help. thanks.Have you tried resetting the device?
Hold down the home and lock buttons until you see an Apple Logo, then release the buttons.
If that doesn't work, you should check to see if you have a backup because you may have to restore your device. -
I am trying to install Acrobat XI Pro. On my Mac, I get the message, "Please close the following applications to continue: - Safari. Safari is closed, but I can't get past this screen. Each time I click "Retry", the message reappears.
TErminate the processes in activity monitor an/ or configure Safari tomnot use the quick launcher and automatic update check so that those processes aren't used to begin with.
Mylenium -
Want to play tv shows purchased on iPad on Apple tv. When I touch icon for apple tv and choose "apple tv" it asks for an apple tv password. We have never set up any password and can't get past this screen. Does anyone know how to find this password?
You can remove the Airplay password from the Settings menu on your AppleTV.
-
how do I set up my airport to make a connection with my Hp? I already have it set up for my mac laptop just not sure how to set it up so that theres also a connection with my Hp
I set up my new HP Descjet 3054A . I had a problem becouse Apple give me CD as a driver. The thing was that CD wasn good for this printer becouse it was old software:) I had to go to Apple store so the specialist had to download me he wright driver. Becouse I didnt wannet to screw this up . When he downloaded driver I fired it up at house and thingworks perfect. The thing is when you download all the software from HP side . Then you have to connect your MAC to printer via USB . Fallow the instructions it should works. Worked for me. Good Luck!
-
why can I not open pictures when I click on the host icon on my desktop? It just sits there, and can not open from top menu bar as well, only via itunes
Does your question involve iPhoto in some way?
-
I am unable to get past this screen in order to take care of this. I plug it in nightly. Wouldn't it just back-up ICloud then?
DonnaI have the same problem now in iphone 4S, can't pass the message or restart my phone, screen is locked in the message nothing else can be done....
-
I updated iTunes today, my phone was connected to my Windows computer and I got a screen telling me iTunes didn't update.
I downloaded iTunes again, and I restarted my computer and connected phone to it, iTunes doesn't come up nor does it see my phone. Should I reset my phone?Hello ellenfromelpaso,
Thanks for using Apple Support Communities.
From your post I see that your iPhone is displaying a connect to iTunes screen, and it is not being recognized by iTunes on your PC. If this is the case, then I'd like you to please follow the first article below for the issue where your iPhone is not being recognized. Once that issue is resolved, you may then proceed with restoring your iPhone.
iPhone, iPad, or iPod touch not recognized in iTunes for Windows - Apple Support
If you see Connect to iTunes screen when you start iPhone, iPad, or iPod touch - Apple Support
Take care,
Alex H. -
Hi,
I've gone through some of the set-up and now cannot move forward past the Internet connection screen. It won't connect nor allow me to do anything now that I've entered my password???
Thanks!No, you did what i suggested. If it asks for the password, then you are talking to the router. That is a good sign. Some folks dont get that far. What is happening now, is the security in the router is not accepting what you are inputting from the pad, or there is some setting in the router blocking your access.
With all the time you have spent on this, and re reading the previous posts, it sounds like you have done everything that i can think of.
Maybe the trip to costco is the answer, and if so, sorry i wasted your time.
Are you comfortable enough with your router to open its contro
Panel up and look at the settings? If so, take a peek. Some routers are set to only allow new devices that are identifed by mac adress. Others, in the securit section, may have a block turned on. But if either of those were the case, you would know, because you would have set it up that way.
If you are an experimenter, try turning off the wifi security entirely, and see if you can join the net work. If you can, then you will have confirmed that the isue js tied directly to theway the router and pad were trying to negotiate the security.
If you can join if it is open, then reset to the lowest type of security you can, get it owrking, then keep moving up until you find the block point.
Glad it is a holiday weekend, so maybe you have the time to **** with it. -
My phone is unable to transfer over here in Japan, so I am using it as an ipod while I have a new phone. It wont register my apple id for facetime or anything though, am I supposed to get an email with a link or something?
activation of imessage requires the ability to send an SMS message to a number commencing with +44. Do you have the ability to send international text messageswhile in Japan?
-
MacBook Pro battery ran low and computer shut down , after charging battery I tried to start up and I got an Apple on a gray screen with spinning wheel that went to a panic call out screen and that's as far as it will go. I've tried start up with command keys ,a few got me to a different screen but nothing has let me into any place I can use to try and repair problem. Anybody have an idea of what's wrong with my laptop and a way to fix it ?
see if you can start up in safe mode. What is safe mode?
-
I bought an iTunes voucher and I try to buy music but its asking me for questions to answer, I try to get email from them but the email they use to send it to doesn't not exist how to I change this?
i'm having the same problem and I have verified all my information but still it keeps telling me to re verify it what do i do
-
I purchased a new iPad and my old iPad went to my daughter. I have a problem though in that my iTunes account has been taken over by her email address. If I want to redeem a voucher on my account her email address appears. How do I correct this?
Did you take a backup in between taking the photos and deleting them ? If you did then try restoring to that backup (you will need to restore the whole iPad, you can't just do the Photos app) and they should be put back.
Backups and restores : http://support.apple.com/kb/HT4079
When you create new albums directly on your iPad and 'copy' photos into them you are effectively just creating pointers to the orginal photos, you aren't creating copies of the photos - so if you then delete the original photo you will also be deleting all pointers to and therefore be removing it from all albums that you've copied it into (you should have got a warning when deleting the photo that that would happen). -
I downloaded the most recent version of iTunes, and now the iTunes store won't open. It just sits there and says 'accessing iTunes store for hours, but does nothing.
Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START>PROGRAMS>ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 n above) - START>PROGRAMS>ACCESSORIES>Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
Apple software on Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US -
I am trying to access some of my songs on itunes on my pc but it's says I need to install icloud. I did this but it says I need to sync my phone but that is an android phone. It says my apple id is valid but still won't let me sign in. How can I get round this?
Enchanted1 wrote:
All this and I still don't have enough space on my startup disk, but that's another whole question!
No, this should be the number one thing you are concerned about.
Until you get this sorted, there is a good chance you may simply lose everything.
Do you hav ean external drive?
If so copy the entire /Music/iTunes/ folder to the external drive.
Then you can delete /Music/iTunes/ empty the trash and recover this space.
Do this then Apple menu > Software update.
Restart the computer
Then post back.
Maybe you are looking for
-
New iPad mini: set up as new or restore from iPhone 5 back-up?
If I want to set-up my iPad mini with the same settings and content from my iPhone 5, do I use Restore or do I set the iPad mini up as a new iPad? Thanks so much for any help you can offer.
-
How can I export a PDF photo portfolio with a clean cover page?
Hello, I have compiled a photo portfolio in Bridge and wish to have a clean cover page that does not have the contact info, copyright, etc., that exists on the photo pages. The cover page was created in Ps and imported into Bridge. From what I can s
-
Cube Redesign : how to identify the culprits in a bad dimension
Hello Community, What is the best way to identify which "combination of characteristics" is guilty for causing a large record count in the dimeension table ? We are working to redesign an infoCube that had many unbalanced dimensions. So far we've do
-
Converting graphic data to analog data
Hello, I have to realize a LabView program to command a step by step motor. My problem is that the command sent to the motor is not the instruction I give to the program. I found that the error is made when the data are converted from graphics to ana
-
Business Objects SSO displays incorrectly
I am in the middle of setting of Business Objects SSO to automatically sign in using the tomcat connector. We can successfully logon using our AD when we go to server:8080/InfoViewApp/logon.jsp with no display issue but when we log to server/InfoVi