On Windows 7 I attempted to run the newest iTunes (11.2) and received a R6025 error message. Can anyone help?
I downloaded the newest iTunes to Windows 7 and tried to run it. I received a R6025 error message.
Hello Spelly78,
It sounds like you are unable to install the latest version of iTunes using Windows 7 due to this error message. I would use the troubleshooting in the following article named:
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
Here is a general overview of the troubleshooting to be done:
General installation troubleshooting
Empty your Temp folder and restart your computer.
Completely remove iTunes and its related components.
Install the latest version of iTunes.
Additional troubleshooting
After performing each of the steps below, you'll need to remove iTunes and its related components and install iTunes again to determine whether the issue was resolved.
Make sure you have an administrator account.
Make sure your folder names don't contain unusual characters.
Get the latest Windows updates.
Disable conflicting software.
Thank you for using Apple Support Communities.
Regards,
Sterling
Similar Messages
-
I have an iphone 4 ... Id like to un-install ios7... I truley hate it... the colors ar child like and nothing works as smoothly. Can anyone help?
Unfortunately downgrading is not possible as it is nto supported by Apple
-
i just got and ipod touch and i have been trying to take the music on my zune and put it on my ipod can anyone help me also i did not buy there music off of the zune store
Ipod touch sync to itunes.
You would need to put everything in itunes, then you can sync to ipod:
iPod touch User Guide (For iOS 4.3 Software) -
updated my mac to mountain lion 10.7.8.3 and now my app store, mail or facetime won't open. Also, I am not longer able to play videos through firefox. I tried downloading the combo for mountain lion and it refuses to install saying that I need to see developer. Whenever I try to open my appstore, mail or facetime it says that the programmes need to be installed and might not be compatible with this version of mac operating system. Can anyone help me?
It's not a bad install of Mountain Lion. I've had the same thing happen to me, but it affected not only Mail, but a variety of other programs including iPhoto and MS Office, where I had to delete preferences, caches, and reinstall the OS as well as the program itself. I'm still having issues with Mail, so I've gone to another program.
Everything was fine upon the initial install. I restarted my iMac about two weeks after the install, and that's when the issues began to happen. I've reinstalled Mountain Lion twice, but the same issues arise.
As I mentioned above, you'll need to figure out which preferences are causing the issue, then reinstall the program, as a fresh reinstallation will do you no good unless you wipe the drive completely.
Here's a thread that helped me with iPhoto:
https://discussions.apple.com/thread/4794375?start=0&tstart=0 -
I need help i cant open my i tunes & keep getting an error message saying unable to run have tried re-installing but not doing anything can anyone help
When you reinstalled, did you first uninstall, and remove all 5 iTunes related components and any remnant files in either Program Files directory?
Certainly hope this assists you:
≈≈≈≈≈≈≈≈
https://discussions.apple.com/docs/DOC-6562
≈≈≈≈≈≈≈≈
Please do respond with results/questions. -
the title is self-explanatory. i'm VERY new to flash so i don't understand a lot of the lingo. can anyone give me a simple answer or, better yet, fix the code for me? i'm reading that it usually comes up when there's a child error but i'm not sure how to fix it.
my code:
var navBtnGlow:GlowFilter = new GlowFilter(0x000000, 0.5, 0, 15, 1, 2, true, false);
navBAR_mc.addEventListener(MouseEvent.MOUSE_OVER, navOverF);
navBAR_mc.addEventListener(MouseEvent.MOUSE_OUT, navOutF);
function navOverF(event:MouseEvent):void{
event.target.filters = [navBtnGlow];
navBAR_mc.setChildIndex(event.target as MovieClip, 1);
dropMenus_mc.gotoAndStop(navBAR_mc.getChildAt(1).name);
trace("We are Rolled Over..." + navBAR_mc.getChildAt(1).name)
function navOutF(event:MouseEvent):void{
event.target.filters = [];
the error message:
RangeError: Error #2006: The supplied index is out of bounds.
at flash.display::DisplayObjectContainer/setChildIndex()
at bestPRIM_fla::MainTimeline/navOverF()
thanks in advance!I'm trying to get my head around this, but here's my shot at it... you have an event listener assigned to navBAR_mc for a mouse over. When the mouseover occurs, you have the following line:
navBAR_mc.setChildIndex(event.target as MovieClip, 1);
Since navBAR_mc is the event.target, it cannot be a child of itself, but I think that's what that line is trying (and failing) to process.
So can you describe what you are trying to do. I would expect that navBAR_mc holds buttons, but based on what I see, it is the button. -
I have attempted to update OS X 10.8.4 and keep getting this error message...The operation was cancelled.(3072) Anyone know why?
You're trying to update an application that's running, perhaps in another account. Make sure you quit all apps that are to be updated. If another user is logged in under Fast User Switching or Screen Sharing, he or she must do the same.
-
iPad stops responding, showing the Apple logo only,i tried to place into recovery mode and attempted to restore again but after downloading the software, it brings error in downloading s/w message.can anyone help please.Thanks
http://support.apple.com/kb/TS3694#error14
These errors are typically resolved by performing one or more of the steps listed below:
Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting.
Put a USB 2.0 hub between the device and the computer.
Try a different USB 30-pin dock-connector cable.
Eliminate third-party security software conflicts.
There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.
Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online.
Try to restore from another known-good computer and network. -
On my macbook pro I have a message on my homepage telling me that certain items want to use my keychain. I've pressed cancel the message will not go. The mac is now running very slow and iphoto and safari are not working. Can anyone help?
What version of Mac OS X?
What home page?
What browser? -
My iphone wont connect to itunes on my macbook after I have already synced it. I am running the lastest itunes 10.4 and I have tried restarting both phone and mac. Can anyone suggest what I can do?
You will have to put your phone into recovery mode and restore the phone as new. Since you don't have a back up, you will lose all the data on your phone but you will be able to use it again.
Use this article iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/HT1212?viewlocale=en_US
Good luck! -
I update my iPhone in iTunes, and after some time, opened a window saying "rosolvendor conflict" and asking me to choose, giving me two options, showing the name of a friend who also has an iPhone.
Can anyone help me?Dear Tim,
I saw your message. Below are the problems:
Whenever I connect my iphone 3GS to my PC through a USB. My itunes software comes up automatically.
1. After that a message appears from the itunes that states that 'itunes could not connect to the itunes store, an unknown error cccured (306).
2. After the above, an alert message comes up which states that A new iphone software version 5.1 is availlable for my iphone. It then states would you like to download it and update your iphone now? With the options buttons as Cancel or Download and Update or Download Only. Whenever I clicked on Download and Update or Download Only, the next message that comes up is that The iphone Software Update Server Could not be Contacted and suggest make sure your network setting are correct and active or try again later.
The above is the challenges I am facing now. -
I have an Imac G5 running on Mac OSX 10.4.11 and would like to upgrade to Lion. I need to upgrade to Snow Leopard first but the aplle dealer tell us here the Snow Leopard is no more available on Power PC. Can anyone help?
Does your Mac meet Lion's requirements?
Apple - OS X Lion - Technical specifications
Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
2GB of memory
OS X v10.6.6 or later (v10.6.8 recommended)
7GB of available space
Some features require an Apple ID; terms apply.
Snow Leopard requirements:
General requirements
Mac computer with an Intel processor
1GB of memory
5GB of available disk space
DVD drive for installation -
I am unable to install Lion. I have a Core 2 Duo iMac with 4GB of Ram and 120GB of free space - and no Bootcamp or other partitions - and yet repeatedly get the 'no recovery' error. Can anyone help?
Run Disk Utility located in /Applications/Utilities before trying to upgrade to Lion in case the startup disk needs repairing.
Using Disk Utility to verify or repair disks -
I have been using CS6 for two years without incident. Suddenly the Media Encoder stops working, showing APPCRASH and displaying error message about WatchFolder.dll - I tried uninstalling and re-installing to no avail - can anyone help?
Hi Mylenium,
Thanks for your response.
Here is the error information showing up:
Problem signature:
Problem Event Name: APPCRASH
Application Name: Adobe Media Encoder.exe
Application Version: 6.0.0.382
Application Timestamp: 4f62fcf1
Fault Module Name: WatchFolder.dll
Fault Module Version: 6.0.0.382
Fault Module Timestamp: 4f62f37f
Exception Code: c0000005
Exception Offset: 0000000000007899
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 4105
Additional Information 1: 9a62
Additional Information 2: 9a620826d8ae4a2fa8b984b39290a503
Additional Information 3: 1fb3
Additional Information 4: 1fb304eee594288faeefbf1271b70d37
I am using a PC Windows 7 -
After i installed ios 7 in my iPhone 4s and I got problem to login into my icloud account.
There is a message appear and said "the operation couldn't be completed (com.apple.appleaccount error 403)"
can you help me ? how can i fix this problem ?
iPhone 4, iOS 7
iPhone 4S, iOS 7, (com.apple.appleaccount error 403)"Error: com.apple.appleaccount error 403
Recreate Error: On a Iphone/Ipad device that has "already" created the maximum of 3 per device Apple limit of ICloud account creation attempt to create or login to ICloud service tab in Settings. You will be presented with "com.apple.appleaccount error 403" which does not tell the laymen anything useful.
Cause: IOS 7 reports a "best guess" error instead of detailed error explanation.
How To Resolve Error: Find a device that has not been used to create an ICloud account the maximum 3 times and use it to create the ICloud account by logging into the Settings/ICloud tab with the Apple ID you want a ICloud account created for.
Keep in mind this will use up one of the three lifetime allowed ICloud account creations allowed by Apple on that device.
Also per support: If an existing account is logged into the ICloud service. A. Backup phone using iTunes on a mac/pc. B. At bottome of Settings/ICloud Delete the account "AND" all the user date from the phone. It will offer the Delete all data option. The reason for Deletion(and is why we backed up on a pc vs. the cloud) is when you create the new ICloud account it will backup all of the Device owners information to the wrong persons account.
Once you have created the new ICloud account log into that account on device that was presenting error: "com.apple.appleaccount error 403" it should allow the ICloud login.
Once you have verified the "device with error" is ICloud functional delete the ICloud account from the device used to seed the ICloud account and delete again all user data from cloud. Restore the recently created mac/pc Itunes locally created backup to the phone and then go to Settings/ICloud and login with the device owners Apple ID and password and verify your backup to the ICloud settings and Eureka! your done.
It took less time to do that for me to type this lol.
Maybe you are looking for
-
How to display smartform table content in condition basis
Hi experts In smartform, can i display the content of table in a condition basis. For example am displaying 4 rows in a page. If the rows exists more than 4, remaining rows i want to display in next page. Is it possible, if so, ho
-
Hi, I have 2 selection screens.i have entered the data in 1st screen and press 'F8',now i wil be getting 2nd screen.In this i have to select the check boxes.once i checked this check boxes that could be saved automatically. Can any one please suggest
-
HP ENVY-j005tx Notebook Video Card Issue
I bought this laptop 6 months ago (still under warranty) mainly for gaming purposes Was happy with the laptop's specs (especially its 16 Gig of Ram), until I found that the Graphics card (NVIDIA GeForce GT 740M) wasn't enough to run games from past t
-
Error 20020 - When trying to filter raw PPG signal
I've got some Raw PPG data points, I want to split these into its AC and DC components, I was told by my supervisor to use a band pass filter with the lower and upper cutoff frequencies as 0.7 and 1.1Hz respectively, I know why I'm recieving the erro
-
I have posted about a freeze problem days ago and have got no response. I did a search on freeze and I can not beli've how many posts have gone un-answered about these freeze issues. If this is how creative treats there customers then they just lost