One computer with 2 accounts-how to move an iPad from one to the other.

imac with 2 accounts-how to move an ipad from one account to the other account

Yes it is possible using PAPI. I have just used PAPI to create instances . I have not tried the requirement which you want. But as per my knowledge it can be done.
Good Luck
Right Chord

Similar Messages

  • How to move a report from one account to another account

    Dear all ,
    How to move a reports from one account to another account.
    These are reports sent automatically. Unfortunately, I do not know where to find them and how to export to another account.
    Puru

    Hi,
    You can use the Transaction SCC1 to move the data from One Client to Another Client for a Client dependent table.
    The data should be present in a Transport and you can import to Transport to any client using SCC1.
    Contact the Basis team to know how to use SCC1.
    Regards,
    Aj

  • How to move BCS data from one box to other

    Hello Expert,
    Dose any one know how to move BCS data from one box to other box ?
    Thanks & Regards,

    1) The best is to do the test. In my case, my customer was just doing this transfer (in full) to perform tests on the BEX reportings. Actually, they never raised any issue regarding document number when they did additional postings in test system... I would also say that during the transfer, the number counter in Qual gets not synchronized with the one in Prod. So, I think the system will just take the next number available in Qual. Should not be an issue.
    2)  As explained in answer 1), in my case, the purpose was not to perform data migration from one system to the other one. Thus, my customer never performed a subsequent consolidation in the target system. But, basically, the transfer copies all data : posting levels 00 to 30, for all periods you have selected + Additional financial data and sequence of activities. Thus, for me, everyhting is available in the target system, including COI documents. In other words, the "picture" regarding the data should be exactly the same between both system. The only thing you need to pay attention to is the customizing : it must be the same in Qual and Prod (example : date of acquisition and divestiture, structure of the group, etc...).
    Another very important thing, is that your export data source must not be enriched due to the BCS Delta load scenario. If it is the case, the system will write the consolidation logic (i-e the consolidation group + reporting mode) when transferring the data from the source Real Time Infocube to the Target Real time infocube, which will lead to inconsistent data in the target system.

  • Two phones one apple account how do I stop imessage from one going automatically to the other?

    two phones one apple account how do I stop imessage from one going automatically to the other?

    You need to setup iMessage on one of the two phones using a different AppleID.

  • How to move SQL database from one location to another location i.e. from C' drive to D' drive

    Hi, How to move SQL database from one location to another location i.e. from C' drive to D' drive ? please share some link.
    Thanks and Regards, Rangnath Mali

    Hi Rangnath,
    According to your description, my understanding is that you want to move databased from C drive to D drive.
    You can detach Database so that the files become independent, cut and paste the files from source to destination and attach again.
    There are two similar posts for your reference:
    http://mssqltalks.wordpress.com/2013/02/28/how-to-move-database-files-from-one-drive-to-another-or-from-one-location-to-another-in-sql-server/
    http://stackoverflow.com/questions/6584938/move-sql-server-2008-database-files-to-a-new-folder-location
    Best Regards,
    Wendy
    Wendy Li
    TechNet Community Support

  • How to move database objects from one user to another user

    Could someone help how to move database objects from one user to another user
    Thanks in advance

    Thanks a lot for the reply.
    Actually I wanted to know whether there is any command to change the owner ship of the table.
    For ex table1 belongs to user1. can the owner of table1 to be changed to owner2.
    directly using an oracle command. I knew that it can be done using import and export, since the table was 200 million thought the rename command would be faster instead of import and export.
    Thanks Billy for letting me know that it is not possible using oracle query.

  • How to move downloaded files from download folder to other relevant folder or how to download files in relevant folders other than download folder

    how to move downloaded files from download folder to other relevant folder or how to download files in relevant folders other than download folder

    Just drag the file from the Download folder to the folder of your choice in Finder. If you are using Safari you can designate a new default download destination in Safari>Preferences>General tab, 'Save Downloads to...'. Other browsers should have a similar option in their preferences.

  • How to move an instance from one activity to another

    Hi all,
    Is it possible to move an instance from one activity to another using an external process? Is it possible to do this with PAPI and pass parameters to the instance in order to determine the instance's flow?
    Regards

    Yes it is possible using PAPI. I have just used PAPI to create instances . I have not tried the requirement which you want. But as per my knowledge it can be done.
    Good Luck
    Right Chord

  • One Computer, Two Accounts - How Best to Proceed with MacOS 10.8.2?

    My wife and I want to share our new iMac, and I'd like some advice on how best to do this without messing things up.
    We both have iOS devices to sync, and we both are using the same iTunes Store Account. However, we each have our own iCloud account. We each have our own email accounts, Hotmail accounts, and Yahoo accounts. We each have our own account for the iMac, which I assume you would need if you wanted to maintain two different sets of Mail accounts and two different Facetime "accounts," what to speak of different desktop customization options. 
    Things we would like to share without duplicating files include: iPhoto library (~100 GB), iTunes media files (over 300 GB), Contacts list, (maybe) Calendar, and (maybe) Safari bookmarks. We do NOT want to share e-mail, Reminders, Facetime. Ideally, I would like for her to be able to sync her devices entirely through her iMac account. However, I am not opposed to her syncing her iOS devices through my account for some things and through her account for other things, if that is not easily avoidable.
    Regarding the iTunes library, I could go either way on her having separate library files with separate ratings & playlists or just sharing the same library setup that I have. However, I would want her to have access to the same metadata that I have for all music and video files, since I have lots of custom album art as well as lyrics loaded in. Do we have to use the same library file in order to have access to the same metadata, which will be updated on a regular basis?  If so, then is there a way to do that via two different computer accounts, or does she pretty much have to sync with my account?
    Now regarding iPhoto libraries, I wouldn't mind us sharing the same "library" as well as the files, including ratings and albums. I would like for the "faces" setup to be the same for both of us, if possible, so that she does not have to repeat the process of face tagging. I read in an older article that sharing the iPhoto library could be accomplished by sending the iPhoto library file to an external hard drive, but as that seemed to be an older approach, I thought I would ask here if that is still the ideal approach. I might want to send the iPhoto library file to an external HD anyway for space considerations. But if I do this, and we are both using the same library file for viewing photos, then does she still see the same albums, events, and tags that I have created already?
    Is there a way to share contacts and calendars without having to share other things like Notes and Reminders? I suppose I could have her sync this information via my account, but I'd be greatful to learn of a better way if there is one.

    You can share out both the iTunes library and the iPhoto Library in their respective preferences. However, the sharing account must have both iTunes and iPhoto running. You can keep the account running with those things open in the background using Fast User Switching. Enable that in the Users & Groups system prefs and then never log out, just switch to the login screen or the other account using the Fast User switching menu.
    I haven't done much actual use in either, so I don't know what the limits are (like making a playlist out of the shared tracks, syncing with iPhone/iPod, etc). For iPhoto, all the photos are available, but if you want to edit one, you have to import a copy into your own library. Another option might be to not keep the media inside the Library, but store it in the /Users/Shared folder. Then, set up your Libraries to leave the content where it is (Preferences). However, I don't think you'd get the metadata for the iTunes music. I believe that is all stored within the iTunes Library.
    You can share iCloud calendars so the other person can see your calendar by right-clicking on the Calendar name. There will be an option to share the calendar, there. Also, you can do so from the iCloud web interface.
    I've got nothing on sharing contacts. Not sure of a good way to do that besides maintaining two sets. You can start from the same source, but it will diverge over time as contacts are added and removed individually.

  • How to move iMovie project from one computer to another

    I have been working on an iMovie 09 project on my desktop at home.
    Now I want to work on the same project on my computer at work.
    How can I move the project from one computer to another?   What I've already tried was to make a duplicate copy of the project and then use a thumb drive to move that to another computer.   It didn't work.
    Thanks for your help.

    Hello James Snedeker,
    After reviewing your post, it sounds like you want to move a file to another disk. I would recommend that you read this article, it may be able to help the issue.
    iMovie: How to Save Projects to Another Hard Disk
    To copy an iMovie project to another disk:
    1. Quit iMovie if it is open. 
    2. Locate the project folder in the Finder.
    3. Drag the project folder to the other disk.
    Note: You must move the complete project folder, intact, to the other disk in order to successfully copy the project. The project folder has the same name as the project listed in the iMovie window. This folder includes the iMovie project file, as well as a Media folder, which contains all of the clips associated with this project. If you don't copy all of these items, the project may no longer be readable in iMovie.
    Once you have copied the project, try opening it in iMovie to ensure that it copied to the other disk successfully.
    Thanks for using Apple Support Communities.
    Have a nice day,
    Mario

  • How to move an itab from one view to another??

    Hi,
    Quick. I retrieve a range from select option in one view? How can i move this range table to another view?
    Currently, this is what I am trying,
      ASSIGN RT_CARRID->* TO <FS_CARRID>.
      RANGE = WD_CONTEXT->GET_CHILD_NODE( NAME = 'TEST' ).
      RANGE->BIND_ELEMENTS( <FS_CARRID> ).
    In the contexts of the two view involved and the component controller i have a node 'TEST' with an attribute range that is declared type ref to data.
    No syntax error, but when i read the context node 'TEST' in the other view, the value is initial.
    Thanks for your quick responses and bright ideas!!
    ALI

    Hi Thomas,
    Here's what I did now. Created an assistance class 'ZCL_WD_COMPONENT_ASSISTANCE' derived from 'CL_WD_COMPONENT_ASSISTANCE' with an attribute, 'my_range_table type ref to data'.
    I assign/attach this class 'ZCL_WD_COMPONENT_ASSISTANCE' to the webdynpro component, by inserting it as an attribute in the component controller. As follow:
    <b>ZWD_ASSIST Type Ref To ZCL_WD_COMPONENT_ASSISTANCE</b>
    Now in the view one I insert code.
    <b>  DATA: RT_CARRID TYPE REF TO DATA.
      DATA: ZWD_ASSIST TYPE REF TO ZCL_WD_COMPONENT_ASSISTANCE.
      CREATE OBJECT ZWD_ASSIST.
      ZWD_ASSIST->MY_RANGE_TABLE = RT_CARRID.
    </b>
    In the view 2.
    <b>  DATA: WD_ASSIST TYPE REF TO ZCL_WD_COMPONENT_ASSISTANCE.
      create object wd_assist.
    rt_carrid = wd_assist->my_range_table.
    </b>
    rt_carrid is still initial.
    Please sort out, if I am not doing correctly.
    Thanks.
    Ali

  • How-to move objects (users) from one ou to another using Powershell and an XLSX

    Hi all,
    I have a spreadsheet that has headers. I need to move all of the objects on this exception report to the proper OU (all going to the same OU).
    The header that validates the need to move is called "Display Name".
    The process now is as follows.
    1) Copy displayname
    2) Open AD search
    3) enter display name in find box
    4) locate object
    5) right click object in results and click move.
    6) move to the OU "Home.test.com/uk Online/Users OU/Business Process"
    --- How can i use Import-CSV to automate this process?
    Thanks for any help, there is about 4K lines on this sheet and it normally takes about 25 days of "busy work" to accomplish this, then 5 days later I have to re-run the report and start over.
    Josh
    Josh Borges

    Hi Josh,
    This assumes that you can save your file as an actual CSV file:
    $skippedUsers = @()
    Import-Csv .\userList.csv | ForEach {
    $displayName = $_."Display Name"
    $user = Get-ADUser -Filter "DisplayName -eq '$displayName'" -Properties DisplayName
    If ($user.Count) {
    $skippedUsers += $displayName
    Else {
    $user | Move-ADObject -TargetPath 'OU=Business Process,OU=Users OU,OU=uk Online,DC=home,DC=test,DC=com' -WhatIf
    If ($skippedUsers) { Write-Host 'The following users could not be moved automatically:' -ForegroundColor Red ; $skippedUsers }
    Do you have to use the display name property? That's not guaranteed to be unique, so you might run into problems. The script above will not attempt to move the user if more than one is returned by the command.
    EDIT: I've also added -WhatIf to Move-ADObject. Now the command won't actually move your users, it will just tell you about it. Remove it if you're happy with the output.
    Don't retire TechNet! -
    (Don't give up yet - 12,420+ strong and growing)

  • I need step by step instructions on how to move an object from one photo to another photo - in Photoshop CC 2014.

    How do you move an object in one photo to another photo in Photoshop CC 2014

    In the document with the object select the object  and use copy (Crtl|CMD+C) then in the other image document use  paste (Crtl|CMD+V).
    However its not a move its a copy the object is still in the original image.  (Crtl|CMD+X) instead of (Crtl|CMD+C) would cut the object out of the first image but leave a hole there that you would need to fill with a replacement to complete a move.

  • How to move Profit centers from one hierarchy to another.

    Hi All - In Standard hierarchy in our Profit center accounting, we have in KCH6N as below and doing posting to these successfully.
    1. C1470 - 000001470 Profit center
    2. C1472 - 000001472 Profit center
    Now for some Business reason, we need to temporarily move above said profit centers in their hierarchy to another one C1410. So Users could post a journal entry and then move the profit centers back to their current location.
    After we make the change, It should be
    C1410 - 000001470 Profit center
    C1410 - 000001472 Profit center
    Can you please suggest me how to move the Profit centers from one hierarchy to another. Can you please let me know how to make this change.
    Thanks

    Hi Hoysala,
    This is not the best practice, to change profit center hierarchy node to another node, just for the sake of JV.
    If you have to allocate a cost/revenue from one cost center/profit center to another, I would advise you to use manual allocation/distribution  process, as per your business reason (Profit Center Allocation/Cost Center Allocation), rather than changing hierarchy nodes.
    You can use 3KE5-Execute Actual Assessment and 4KE5-Execute Actual Distribution from Profit Center 1470/1472 to the profit center under node C1410, without moving profit center from one node to another.
    http://veritysolutions.com.au/2012/07/03/overhead-allocations-in-sap-new-gl/
    Regards
    Javed

  • How to move supporting details from one intersection to other?

    Hi,
    I want to move data from one intersection to other along with supporting details and comments. Now i want to delete everything (data, supporting detail and comments) from previous intersection. I know how to clear data but do not know how to delete comments and supporting details form that intersection.
    Can you help me with this?
    Thanks!

    I have found it.
    Thank
    Its Adminstration -> Clear Cell details..

Maybe you are looking for