One field is visible in print preview but does not appear when printed
Hi,
We have a batch job that creates the spool, but one field of the form is visible during print preview of the spool but is NOT visible in the print out.
How do we solve this?
Is there an error in the printer?
Thank you!
Rgds,
Freishz
Hi guys,
The catch is, when re-printed, it already appears. But after the batch job has been completed, this does not automatically appear.
This involves, output type of a delivery.
Thanks for your reply!
Similar Messages
-
MacOSX (10.9): Print dialogue box does not appear when printing PDF's
Hi there,
I've been having some troubles with the latest version of Adobe Reader on an intel-based MacBook Pro running MacOSX 10.9 (Mavericks).
Environment Details:
Device type: MacBook Pro
OSX: 10.9 (Mavericks)
Adobe Reader version: 11.0.06
Details:
After installing Reader 11.0.06, the print dialogue box does not appear through the print button or through File -> Print... . As a result, I simply cannot print PDF documents when using Adobe Reader.
- Only 1 MacBook Pro affected
- The print dialogue box does appear for other application (i.e. Preview, Word, Excel, etc., etc.)
- Multiple restarts performed
- Attempted to download older versions with no success
- Attempted multiple uninstall/reinstalls
- Reset the CUPS printing system multiple times
- Validated that the account accessing/using Reader has full administrative privileges to the Adobe Reader application
- Occurs for multiple PDF's from various sources
-> Online source
-> Converted from Word
Additionally (I'm unsure if this is related or not), but after trying to perform an update, I receive the following error:
An unimplemented or obsolete function was called
Any help would be greatly appreciated.
Cheers!Hi there,
Just bumping this thread for more visibility.
If anyone has any thoughts, I'd more than appreciate your advice!
Cheers! -
Epson r800 prints, but does not appear in Printer List: can't use Utilities
My Epson r800 prints, but does not appear in Printer List. It is connected via USB to the iMac. A Brother LH-2070N is connected via AirPort Extreme. I need to use Utilities to clean the head of cartridge, check levels, etc.. Is there a way to fix this problem?
iMac Mac OS X (10.4.9)For your Epson try this:
Hard Drive, Library, Printers (folder), Epson folder,
Inkjetprinter folder, Utilities folder and here you
will find Epson Printer Utility2. Click on it and it
should work.
Note. Epson utilities will not work unless the
Printer is directly connected to the computer.
Had the same issue with my 2200 photo and the above
worked.
Tried again after reinstalling the drivers. There is no separate Inkjet Folder, but the Printer Utility is within the Epson folder. Unfortunately, the r800 still does not appear in the Printer List, hence no utility. -
I installed an add-on that would allow me to change the content of the context menu. It works like a charm and I want to make a donation to the person who developed it, but I can't remember its name and I don't know how to find a list of the add-ons that I have installed. I've checked the lists that appear when you go to the Add-ons Manager under Extensions, Appearance, and Plugins, but it isn't there. Any help would be very much appreciated.
You're welcome. Could you mark the problem as solved, that along with the comment you already made helps other users with similar problems find aspects of Firefox and try things out for themselves, Thanks.
-
Field on manual tabular appears using Firefox but does not appear using IE
Hello,
A field in a manual tabular form appears correctly using Firefox but does not appear or appears in another field when IE is used. Javascript is used to hide certain columns on the tabular form. Does anyone know how to solve this problem?
Thanks panyPrabodh,
The select for the report and the javascript that is used to hide the columns are displayed below. The data for Apex_item.select_list_from_lov(12,null,'LOV_METHOD_OF_ACQ') is shown in the previous column, Date Acquired, and the column for Method Acquired is blank. It appears correctly in Firefox. Please let me know if this is sufficient.
Thanks,
pany
SELECT
apex_item.hidden(1, c011) status
,apex_item.checkbox(2,seq_id) checkbox
,apex_item.hidden(3, seq_id) seq_id
,apex_item.hidden(4,c001) Owner_Firm_Id
,apex_item.hidden(5,c002) Owner_Id
,apex_item.hidden(6,c003,10) First_Name
,apex_item.hidden(7,c004,10) Last_Name
,apex_item.text(8,c005,10) Number_Shares
,apex_item.text(9,c006,10) Percentage
,apex_item.text(10,c007,10) Class
,apex_item.date_popup(11,rownum, c008, 'MM/DD/YYYY',15) Date_Acquired
,apex_item.select_list_from_lov(12,c009,'LOV_METHOD_OF_ACQ') Method_Acquired
,apex_item.hidden(13,c010,10) Primary_Key
FROM apex_collections
WHERE collection_name= 'INTEREST_STOCK_COLL'
AND c011 IN ('O','N','U')
union all
select
apex_item.hidden (1,null) status
,apex_item.checkbox(2, null) checkbox
,apex_item.hidden(3, null) seqid
,apex_item.hidden(4,null,10) Owner_Firm_Id
,apex_item.hidden(5,null,10) Owner_Id
,apex_item.hidden(6,null,10) First_Name
,apex_item.hidden(7,null,10) Last_Name
,apex_item.text(8,null,10) Number_Shares
,apex_item.text(9,null,10) Percentage
,apex_item.text(10,null,10) Class
,apex_item.date_popup(11,1, null,'MM/DD/YYYY',15) Date_Acquired
,apex_item.select_list_from_lov(12,null,'LOV_METHOD_OF_ACQ') Method_Acquired
,apex_item.hidden(13,null,10) Primary_Key
FROM dual
Javascript
function hideCols(p_startOfTable, p_pageList, p_debug)
alert("in function");
var outStr = "Blanking Script:\n";
var debug = p_debug;
var offCols = p_pageList.split(":"); //string comes in colon delimited, split it
into array
var tbl = document.getElementById(p_startOfTable); //get the table from the page
html source
var rows = tbl.getElementsByTagName('tr'); //get the first row
var tds = tbl.getElementsByTagName('td');
var testStr;
outStr = outStr + "START tds length is " + tds.length + "\n";
if (debug)
alert(outStr);
//START Clear Headers
var i, j, cells;
cells = rows[0].getElementsByTagName('th'); //get the headers
for (j = 0; j < offCols.length; j++)
cells[j].className = "hidden";
outStr = outStr + "i is " + i + " HEADER rows.length is " + rows.length +
"\n";
if (debug)
alert(outStr);
//END Clear Headers
//START Clear TDs
for (i = 0; i < tds.length; i++)
var attrib = tds.innerHTML;
var gNum = attrib.indexOf(" name=") + 7;
var colNum = attrib.substr(gNum, 2);
colNum = parseFloat(colNum);
for (j = 0; j < offCols.length; j++)
if (debug)
testStr = testStr + "\n" + "colNum is: " + colNum + " className is: " +
tds[i].className + " i is: " + i + " j is: " + j + "\n";
if (colNum == offCols[j])
if (debug)
alert("colNum is " + colNum);
if (tds[i].className == "datepicker")
if (debug)
alert("caught condition with i= " + i);
tds[i - 1].className = "hidden";
tds[i].className = "hidden";
tds[i + 1].className = "hidden";
//add popupLOV functionality here
//add radio button functionality here
// add other items that may have multiple <td>
else
//regular hideCol
tds[i].className = "hidden";
//END Clear TDs
if (debug)
alert(testStr);
//document.write(testStr);
Edited by: PANY on Aug 12, 2010 8:25 AM -
I created a theme and a slideshow in iDVD. The theme (intro) plays looped in the preview, but does not go on to the slideshow. How do I "un"loop it?
Perhaps someone on this forum has done what you are asking and would be more help than me.
I think it could be done, but you'd have to do some fiddling around. The concept is to make the iDVD theme part of your iDVD or iMovie created slideshow, so that it will play as part of the slideshow.
I don't know if this will work, but if I were experimenting I would try creating an iDVD project with just the theme in it, and then save that to your desktop as a disc image. When you click on the icon of the disc image you have just created, you will see a Video_TS folder. Open that and you will see a file containing the letters VOB. Open that file.
You need to convert that VOB file back to DV or Quicktime Movie which iMovie is designed to handle. For that you need the free download MPEG Streamclip:
http://www.apple.com/downloads/macosx/video/mpegstreamclip.html
but you must also have the Apple mpeg2 plugin :
http://www.apple.com/quicktime/mpeg2/, which I believe costs about $20.
Open MPEG Streamclip and drag the VOB file to its window. Go to the MPEG Streamclip file menu and click on Export to DV.
After the export is done, you will have a DV file containing the iDVD theme. I would try adding that clip as your first entry in your slide show, assuming that you are running iDVD7. (You can't add a movie to a slideshow in iDVD6.) When you play your slideshow hopefully it will play the DV clip containing the theme, then seamlessly followed by your slide show. If it doesn't, try instead exporting the VOB file to a Quicktime Movie, and then try to add the Quicktime movie to your slideshow.
You might be able to do this easier if you created your slideshow in iMovie instead of iDVD. You could make an iMovie with the iDVD theme clip as the lead clip, and then share your iMovie project to iDVD.
Good luck with this. As I said, perhaps someone else has an easier way to do this and will chime in. -
I am having trouble printing I have a connection to my printer wirelessly but does not print out the correct page I want.When I do print I get a bunch of pages more than is needed and also get a code and symbols please help I am jammed at work
This can be the result of selecting the wrong driver. An older, unsupported laser printer will sometimes work with the generic Postscript driver.
-
i have a printer xerox 3220 on networking ,have pc´s and a mac ,problem:it´s already install but does not work ,only print many page with code program,i will appreciate the solution
Hi guillermospain,
Welcome to the Support Communities!
The article below may be able to help you with this.
Click on the link to see more details and screenshots.
OS X: Connecting a Wi-Fi printer to your Wi-Fi network
http://support.apple.com/kb/ht3500
OS X Mountain Lion: Set up a printer
http://support.apple.com/kb/PH11145
OS X Mountain Lion: Reset the printing system
http://support.apple.com/kb/PH11143
Cheers,
- Judy -
My ipod works in itunes but does not appear in "my computer" after I changed the properties
My ipod works in itunes but does not appear in "my computer" after I changed the properties.
First off, I'm using Windows XP (and Mac SnowLeopard) Here's how it started. For some reason my ipod started showing up as a camera when I plugged it in. It works fine in itunes, though. But when I tried to access it from "my computer" it only
showed me the one and only picture I had on my ipod. I deleted that picture hoping it would no longer show up as a camera. When it still did I right-clicked on it in "my computer" and selected "properties". Under "autoplay" I
chose for it to 'not show up' or 'take no action' or some such deal when I plugged it in. I thought that would stop it from popping up the window that asks whether i want to 'open camera wizard' or 'open camera scanning' or 'open folder to view files' or 'take
no action' , etc. But now it won't show up in "my computer" at all. I also have a Mac with SnowLeopard. When I plugged my ipod into it my ipod doesn't show up in "finder" either! So basically my problem is not a mechanical one with hardware
or software; yht ipod still works fine in itunes. I just need to undo the change I made. I've searched all around my preferences, utilities, options, etc. It shows up on my "Device Manager" but not on "Disk Management".
Any help would be very much appreciated. Thanks.Hi,
To show up in Windows Explorer, you can try placing the iPod into
disk mode.
Moreover, i recommend you to
restore ipod to factory settings.
If this issue still persists, locate to device manager, uninstall and reinstall USB Mass Storage Device driver.
Here is an article you can refer to below:
http://support.apple.com/kb/TS1369
To get more help, you can also redirect to apple support forum:
http://www.apple.com/support/ipod/
Thanks!
Andy Altmann
TechNet Community Support -
I seem to have lost fax capability with Snow Leopard.
Does not appear in Print as before. Cant find fax in System Preferences. No drivers for fax found.
Initially said it was downloading software but no longer does this. Fax test works on HP site.
Using HPC410aHP Photosmart Premium
Any help would be appreciated.
Bob Wines.Thanks for your detailled description of the faxmodem installation!
I've tried this with Mac OS X v10.8 Mountain Lion and it works fine.
I've to type "cupsctl WebInterface=yes" in terminal to see the interface.
Does anybody know, if send faxes are saved somewhere? -
Hi, My iOS device (Ipad mini) only appears in iTunes while cable-connected, but does not appear after diconnect the cable. How can I Wifi sync ?
Documents say
Whenever the computer and the iOS device are on the same network, the iOS device will appear in iTunes, and you can sync it....
But I can't see my iPad Mini in iTunes.
And my Ipad (Settings, General, iTunes Wifi Sinc) shows a message :" Sync will resume when xxx(my PC with iTunes) is available "...
Both are in the same network,
Ipad mini is is plugged in to power
. iTunes is open on the computer
what can i Do ???Hi Skydiver119, and tks for four interest.
I have done exactly as you say, but it does not work for me.
You indicated " Navigate to the info tab and scroll down. There'll be a check box for 'sync over wifi' or something to that effect. Check that box and sync to affirm your choice."
I navigated to Summary tab (not Info Tab) and checked "Sync with this ipad over Wi-Fi"
I disconnect the wire,
and my iPad disappears from my iTunes screen.
in my iPad ->Settings -> General -> iTunes Wi-Fi Sync -> says " Sync will resume when (my PC) is available.
So, I can not sync via wi-fi
I appreciate if you can help me. -
I am using windows 7 and my 3rd gen nano is not recognized in itunes. I have followed all online troubleshooting to no avail. My ipod is recognized by windows but does not appear in itunes.
not recognized by anything: http://support.apple.com/kb/TS1369
recognized by windows, but not itunes: http://support.apple.com/kb/TS1363
solving the problem if the above does not work:http://www.instructables.com/id/What-to-do-when-iTunes-does-not-recognize-your-i Po/step1
(make sure you go to the next slides. -
I have installed the font Broadway on my computer and it works in Microsoft Word but does not appear in the font list in InDesign. How can I fix this problem?
Start by rebooting the computer. If that doesn't work, search for adobefnt*.lst and delete all instances where * becomes a 2-digit number.
-
Applet compiles but does not appear...
the applet compiles but does not appear :(
all that appears is a blank box...hopefully someone can help
import java.awt.*;
import java.applet.*;
import java.awt.event.*;
public class program2 extends Applet implements ActionListener
private Button btLeft, btRight, btUp, btDown, btBgYellow,
btBgRed, btBgBlue, btBgOrange, btTxtRed,btTxtYellow, btTxtBlue,
btTxtOrange, btFtHel, btFtCr, btFtTr, btFtSy;
private MessagePanel messagePanel;
private Panel p = new Panel();
public void init()
p.setLayout(new BorderLayout());
messagePanel = new MessagePanel("Java is Life");
messagePanel.setBackground(Color.white);
//directional buttons
Panel pButtons = new Panel();
pButtons.setLayout(new FlowLayout());
pButtons.add(btLeft = new Button());
pButtons.add(btRight = new Button());
pButtons.add(btUp = new Button());
pButtons.add(btDown = new Button());
//Background buttons
Panel BgButtons = new Panel();
BgButtons.setLayout(new FlowLayout());
BgButtons.add(btBgRed = new Button());
btBgRed.setBackground(Color.red);
BgButtons.add(btBgYellow = new Button());
btBgYellow.setBackground(Color.yellow);
BgButtons.add(btBgBlue = new Button());
btBgBlue.setBackground(Color.blue);
BgButtons.add(btBgOrange = new Button());
btBgOrange.setBackground(Color.orange);
//text color buttons
Panel txtButtons = new Panel();
txtButtons.setLayout(new GridLayout(4,1));
txtButtons.add(btTxtRed = new Button());
btTxtRed.setBackground(Color.red);
txtButtons.add(btTxtYellow = new Button());
btTxtYellow.setBackground(Color.yellow);
txtButtons.add(btTxtBlue = new Button());
btTxtBlue.setBackground(Color.blue);
txtButtons.add(btTxtOrange = new Button());
btTxtOrange.setBackground(Color.orange);
//font buttons
Panel ftButtons = new Panel();
ftButtons.setLayout(new GridLayout(4,1));
ftButtons.add(btFtHel = new Button());
ftButtons.add(btFtCr = new Button());
ftButtons.add(btFtTr = new Button());
ftButtons.add(btFtSy = new Button());
//layout
p.add(messagePanel, BorderLayout.CENTER);//set center 1st
p.add(pButtons, BorderLayout.SOUTH);
p.add(BgButtons, BorderLayout.NORTH);
p.add(txtButtons, BorderLayout.EAST);
p.add(ftButtons, BorderLayout.WEST);
//listeners
btLeft.addActionListener(this);
btRight.addActionListener(this);
btUp.addActionListener(this);
btDown.addActionListener(this);
btBgRed.addActionListener(this);
btBgYellow.addActionListener(this);
btBgBlue.addActionListener(this);
btBgOrange.addActionListener(this);
btTxtRed.addActionListener(this);
btTxtYellow.addActionListener(this);
btTxtBlue.addActionListener(this);
btTxtOrange.addActionListener(this);
btFtHel.addActionListener(this);
btFtCr.addActionListener(this);
btFtTr.addActionListener(this);
btFtSy.addActionListener(this);
//implement listener
public void actionPerformed(ActionEvent e)
if(e.getSource() == btLeft)
left();
else if(e.getSource() == btRight)
right();
else if(e.getSource() == btUp)
up();
else if(e.getSource() == btDown)
down();
else if(e.getSource() == btBgRed)
red();
else if(e.getSource() == btBgYellow)
yellow();
else if(e.getSource() == btBgBlue)
blue();
else if(e.getSource() == btBgOrange)
orange();
else if(e.getSource() == btTxtRed)
redText();
else if(e.getSource() == btTxtYellow)
yellowText();
else if(e.getSource() == btTxtBlue)
blueText();
else if(e.getSource() == btTxtOrange)
orangeText();
else if(e.getSource() == btFtHel)
helvetica();
else if(e.getSource() == btFtCr)
courier();
else if(e.getSource() == btFtTr)
times();
else if(e.getSource() == btFtSy)
symbol();
//directional methods :0)
private void left()
int x = messagePanel.getXCoordinate();
if(x > 10)
messagePanel.setXCoordinate(x - 10);
messagePanel.repaint();
private void right()
int x = messagePanel.getXCoordinate();
if(x < (getSize().width - 5))
messagePanel.setXCoordinate(x + 5);
messagePanel.repaint();
private void up()
int y = messagePanel.getYCoordinate();
if(y < (getSize().height - 10))
messagePanel.setYCoordinate(y - 10);
messagePanel.repaint();
private void down()
int y = messagePanel.getYCoordinate();
if(y < (getSize().height + 10))
messagePanel.setYCoordinate(y + 10);
messagePanel.repaint();
//background methods :)
private void red()
messagePanel.setBackground(Color.red);
private void yellow()
messagePanel.setBackground(Color.yellow);
private void blue()
messagePanel.setBackground(Color.blue);
private void orange()
messagePanel.setBackground(Color.orange);
//text color methods :)
private void redText()
messagePanel.setForeground(Color.red);
private void yellowText()
messagePanel.setForeground(Color.yellow);
private void blueText()
messagePanel.setForeground(Color.blue);
private void orangeText()
messagePanel.setForeground(Color.orange);
private void helvetica()
Font myfont = new Font("Helvetica", Font.PLAIN,12);
messagePanel.setFont(myfont);
private void courier()
Font myfont = new Font("Courier", Font.PLAIN,12);
messagePanel.setFont(myfont);
private void times()
Font myfont = new Font("TimesRoman", Font.PLAIN,12);
messagePanel.setFont(myfont);
private void symbol()
Font myfont = new Font("Symbol", Font.PLAIN,12);
messagePanel.setFont(myfont);You add everything to the Panel p but you never add that panel to the applet. What you probably want is to add everything to the applet. An applet is a special kind of panel so you can just change "p" to "this" everywhere in init and remove the declaration of p at the top.
-
We have created a new website and are hosting the website on the Shaw server. The address is generically www.members.shaw.ca/member/directory.
We created a website address for our association by registering our domain address - something like www.associationXYZ.ca
The domain registration folks have redirected our domain address to the hosting location address.
The favicon can be seen under Tools->Page Info->Media but does not appear beside the bookmark entry?The redirect address is www.northsaanichresidentsassociation.ca
From other info on this subject the problem may be related to the type of redirection and/or missing script to handle the redirection.
Maybe you are looking for
-
How to kill a single user in BO XI 3.0
Hello, I thought there was a SDK for killing single users on a system. Can someone help me out again on where to find this procedure. thanks Thierry
-
How to apply Time Remap to multiple clips simultaneously
Quite often after trimming many different clips for a wedding video I will then want the majority of them slowed down to a 50% speed. I know how to apply the Time Remap Speed % change in the Motion Tab, but have yet to figure out how to make the chan
-
I have an ATI-RADEON-9800-PRO-128Meg card.I run it at 8X AGP with fast writes enabled.I noticed that the voltage can not be adjusted below 1.55V in the BIOS.ATI states the the 9800-PRO 8x AGP should be 0.8V.AGP 8X (0.8v), 4X (1.5V).Core Center will n
-
Cloud Accounting Technology Expo Launches for Xero Users│Cheyney Group Marketing
One of Australia's leading cloud software integrators launched an online expo today to introduce a selection of cloud programs that connect with cloud accounting software. Jeri Murphy, publisher of cloud integrator website JeriMurphy.com, has recorde
-
Essbase install for 11.1.2.0 does not create opmn.xml
We are currently doing a test install of EPM 11.1.2.0 and are having a specific problem. Foundation services are all installed and running fine but the Essbase install seems to not create the necessary opmn files so we can't start it. No opmn.xml is