One of 3 links on a web page does not work under Firefox 9.0.1 but all three work under IE.

Please float your mouse over the Paypal button (bottom left) and over the Envelope button and the arrow will change to a pointed finger. Float it over the adjacent Blog button and the arrow remains an arrow. With Internet Explorer, all three button links work - but not with Firefox 9.0.1. Why is this?

Well done knorrtje. I have since saved the page as .htm code and viewed the page layout with Dreamweaver and your diagnosis is spot on. I have contacted the page owner and requested a change be made to uncover the Blog button. Many thanks to you and have a great 2012.

Similar Messages

  • Ince updating my firefox browser whenever i click on an internet link in an email it does not open on firefox although my mac switches to the firefox window as this is my default browser- what to do? Previously this has always worked without a hitch...

    ince updating my firefox browser whenever i click on an internet link in an email it does not open on firefox athough my mac switches to the firefox window as i have this set to be my default browser- what should i do?

    I have the same problem, and I also wondered if Google toolbar has anything to do with it. There GMAIL was set as the default mail application at first. I have removed that setting, but Firefox 4.0.1 continues to use GMAIL instead of Outlook which is my selection for mailto handling.

  • Web page entries not responding in Firefox that work on Safari.

    1.
    http://www.buytickets.firstgreatwestern.co.uk/combinedmatrix.aspx?Command=TimeTable
    After selecting 'Show prices' page does not move on. Using 'Back' to show prices and selecting ticket no 'Next' button appears.
    2.
    https://uk.virginmoneygiving.com/fundraiser-web/donate/makeDonationForFundraiserDisplay.action?fundraiserActivityId=181498
    On selecting 'Other' the amount box shows steady caret and will not accept input from keyboard, though the message box will show flashing caret and accept input.
    The page does not freeze. Cache has been cleared.
    These problems do not happen when using Safari 5.1.2

    Hi,
    Please also check if this happens in [https://support.mozilla.com/en-US/kb/Safe%20Mode Safe Mode.]
    [http://kb.mozillazine.org/Problematic_extensions Problematic Extensions]
    [https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes Troubleshooting Extensions and Themes]
    [http://support.mozilla.com/en-US/kb/Uninstalling+add-ons Uninstalling Add-ons]
    [http://kb.mozillazine.org/Uninstalling_toolbars Uninstalling Toolbars]

  • Web page does not open

    HELP!!!  I have a Yoga 2 - 13  seemed to be working fine but recently I am experiencing a problem where some web pages will not open properly. 

    You need to provide more details (like browser type, websites you are visiting, any additional toolbars or extensions you have installed, did you run a virus check, is your system slower now etc.) and some screenshots.
    Current System - Lenovo Y510P, GT755M SLI, 8GB RAM, 1TB HDD + 24GB SSD
    When your plans fail, your Real Story begins!!

  • The Help Link from the Application Pages Does not Work for Peoplesoft Campus Solutions 9.0

    Hi everyone.
    I have a problem, I have been trying to set up the Help Link from the Application Pages for Peoplesoft Campus Solutions 9.0 according to the instructions given in the Document: http://docs.oracle.com/cd/E17566_01/epm91pbr0/eng/psbooks/EnablingtheHelpLinkfromApplicationPages.pdf ,  (referenced in the Doc ID 1289101.1, E-PB: How to Set Up the Context Sensitive Help with Hosted PeopleBooks using Universal Linking).
    I follow the instructions of that document carefully:
    I go to: PeopleTools -> Web Profile -> Web Profile Configuration
        2. Then I choose the Web Profile: "Development".
        3. Then Change the value for the Help URL field by entering the following URL format: http://www.oracle.com/pls/topic/lookup?id=%CONTEXT_ID%&ctx=hrcs90r5 , the ctx parameter selected is the one that correspond to  the Campus Solutions (hrcs90r5) according to the Product Line Code Table (ULinkID) especified in the mentioned document.
        4. Stop the Web Domain and Clear cache.
        5. Start the Web Domain again.
    After setting up the Web Profile Configuration I test the help links, thas is why I click in the Help link in any Peoplesoft CS 9.0 Application Page (modify a person), but the next error message appears: "We're sorry, the topic you requested was not found.".
    I tried many combinations with the ctx parameters URL but it does not work yet. 
    I did the same test, but this time using the Help URL field with a HRMS ctx parameter by entering the following URL format: http://www.oracle.com/pls/topic/lookup?id=%CONTEXT_ID%&ctx=hcm92pbr5 , and It works fine !!!
    According to the previous test you realize that It works with HRMS ctx parameter but not with Campus Solutions 9.0 ctx parameter,  Does anybody know what else can I do ? Am I doing anything wrong or missing? or maybe the Oracle's ctx parameter for Campus Solutions URL It is broken simply.
    Thanks for you help and feedback.

    2799444 - The page you are testing with appears to be a Workforce Administration page. Is that correct?
    The CS PeopleBooks would only work for CS pages, e.g.: try navigating to Main Menu > Campus Community > Personal Information > Add/Update a Person
    Also, you can use multiple ctx parameters:
    E.g.: http://www.oracle.com/pls/topic/lookup?id=%CONTEXT_ID%&ctx=hrcs90r5&ctx=hcm92pbr5&ctx=pt852pbh2
    This way the help would work for the HR related pages like Workforce Administration, Campus Solutions pages like Campus Community and also PeopleTools pages like Web Profile Configuration. Hope this clarifies your question. Thanks!

  • Create PDF From Web Page Does Not Create Image Maps Properly

    I have a website that contains image maps. When I "Create PDF From Web Page", these image maps are not rendered properly. From what I can tell, this is a BUG within Acrobat, and I'm hoping that people can confirm this for me.
    I created a test page at http://www.quantumdynamix.net/clients/image-map-test/. I placed the images maps my manually coding the coordinate information, so the maps are PRECISELY placed exactly over the squares. Each image map navigates to an anchor corrisponding to the number on the red square.
    When I created the PDF using the "Create PDF From Web Page" feature, the image maps are rendered improperly. This file can be viewed at http://www.quantumdynamix.net/clients/image-map-test/ImageMapTest.pdf. To view the outlines of the image maps, please select "Tools" -> "Advanced Editing" -> "Link Tool". You can see the outlines are substantially incorrect.
    Please confirm that other can replicate this problem. Any solution to this issue would be very helpful!

    I tested this in Acrobat X and the exact same issue occurs
    http://www.quantumdynamix.net/clients/image-map-test/ImageMapTest-AcrobatX.pdf
    This has to be considered a legatimate bug, especially since IMAGE MAPS is listes as one of the supported HTML features via the help files

  • Mp3 as background audio on web page does not play in ff 3.6.22 It does play in IE why?

    I am building a web page. When I was editing the page and clicked on browser review, the music I was playing in the background played in ff 3.6.22 and in IE 7. When I uploaded the page to the web for testing, the background music played in IE7 but not ff 3.6.22.
    The url for the test page is [http://dj-group.org/efm/saints.html testpage] http://dj-group.org/efm/saints.html
    In the process of trying to figure this out, I updated my plugins, all but one successfully. Java would not install because an error message said there was a syntax error. (Since I ran the installer from the Firefox download screen and not through the command line, I tried to contact Java only to find out that the only way I can get help is to pay $1/minute. This is ridiculous.)
    The test page still works in IE but not ff
    Please help

    Somehow in the process of updating my plugins, Windows Media got deleted. I reinstalled Windows Media and it's ok.
    But I would like to know what to do about the Java

  • Web page does not see SWF file

    Hi, I am wondering if anybody can point me in the right direction?
    I have created a web page with Indesign which includes some animation.
    When I export it to SWF format it creates seperate HTML and SWF files.
    I have moved these two files, together with every other file I used in creating the document to my web host (Hostmonster). I have read on other threads that I probably should have a RESOURCES file, I don't have one.
    When I go to my home page, I get a grey screen, which Hostmonster inform me is because the HTML cannot find the SWF file.
    Anybody got any idea what I may be doing wrong.
    Thanking you in advance.
    Warmest regards
    Peter

    Hi Bob,
    Thank you for taking the time to try and help.
    I uploaded the files and folders using Filezilla.
    The above image was a screen sho under Hostmonster that shows that my files are indeed there.
    I also came across a folder for SWF which I believe belongs to the main website (cliveread.com) and put my file in there, it does not make any difference.
    As you will see in 3 both my HTML and SWF files are there.
    As a novice I hope you can help.
    Warmest regards
    Peter

  • Web page does not open in new tab as well as in that tab

    as soon as i updated firefox version, there seems to be a problem in it. new link does not open up. in get stuck and even after refreshing it does not open up.

    Hello DurgaPrasad, '''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that turns off some settings, disables most add-ons (extensions and themes).
    Restart in Firefox Safe Mode from the Help menu:
    *In Firefox 29.0 and above, click the menu button [[Image:New Fx Menu]], click Help [[Image:Help-29]] and select ''Restart with Add-ons Disabled''.
    When the Firefox Safe Mode window appears, select "Start in Safe Mode".<br>
    [[Image:Safe Mode Fx 15 - Win]]
    '''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
    ''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
    Check specially your V-bates 2.0.0.444 extension, reports mentioned maybe malicious extension.
    thank you

  • iframe link, inside a frameset page, does not go to the new link when left clicked. but just clears the page instead.

    Trouble shooting info from my computer attached as requested, but problem exists on other people's computers also, including MACs.
    Problem exists only with <iframe> link within a page that is part of a frameset. If page contained within a frameset is accessed directly (ie, show only this frame) then the <iframe> link works normally.
    Works ok in Internet Explorer, used to work in Firefox. If RIGHT click on the <iframe> link then select either new tab or new window it works OK.

    At first I was ending up opening to the Help page, but finally u sent me instructions that worked. Now my Net connection opens to my Yahoo page.

  • Safari 6.0.1 won't load web pages randomly, and says website unavailable/no connection. But, all my other devices do have a great connection. Is there a fix for this problem?

    I recently bought OS X mountain Lion, and safari 6.0.1 was running great for a short period of time when it stopped loading the web pages. It will randomly do this now and then. I try resetting safari to no avial, and when I do a system reset it provides a temporary fix. It's very annoying problem. I know it is not a connection problem because all my other devices get internet connection. Safari will say no connection/web site is unavailable. The OS I have is OS X ML 10.8.2. Any suggestions?

    I do a system reset
    System reset ???
    Try a different DNS ...
    Quit Safari.
    Open System Preferences / Preferences then select the Network tab. Click the Advanced tab then click the DNS tab.
    Click +
    Enter these addresses exactly as you see them here.
    208.67.222.222
    Click +
    208.67.220.220
    Then click OK.
    Try Safari.

  • Web page does not fit screen. now have scroll bar at the bottom

    2 problems exist and i have tried to find solutions to both with no luck. On Firefox 16.0.2 using XP Pro.
    First: Web pages no longer fit screen. Now have scroll bar at the bottom. For some strange reason this just started. I tried the CTRL+ 0 with no luck.
    Second: At the same time the above started when i open a program it opens in a reduced screen size and i have increase it to full screen size. This also occurs when i have it reduced 9in the system tray and i bring it back to the desk top.
    I have made no changes to firefox these problems just started. A reboot of the computer did not help

    Did you check the window settings of the Firefox desktop shortcut to see how Firefox opens?
    Did you try to delete the current Firefox desktop shortcut and create a new shortcut?
    Use Restore or Maximize in the right-click context menu of the Taskbar icon to set focus to the Firefox application if you do not see the Firefox window.
    Open the system menu of that Firefox window via Alt+Space and see if you can move and resize that window (use the keyboard cursor keys).<br />
    If that works then first close all other open Firefox windows and then close Firefox via "File > Exit/Quit" to save that setting.

  • Jsp page does not open with firefox! plz help..urgent!!

    hi,
    i have a wierd problem...
    i am hosting my website
    currant.hos.ufl.edu/mutail/rahul/testing2.jsp
    if i open it in IE, it works fine...
    but it doesnt work if i open it in mozilla. it just shows me the java code (maybe it takes the jsp code as html text)...
    <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
    <%@ page
         import = "java.io.*"
         import = "java.lang.*"
         import = "java.sql.*"
    %>
    <HTML>
    <HEAD>
    <TITLE>DR McCarty</TITLE>
    <META http-equiv=Content-Type content="text/html; charset=iso-8859-1">
    <meta name="title" content="Don R. McCarty">
    </HEAD>
    <BODY>
    more notably, the error is in the <%= page import line...
    the error in validator.w3c.org is:
    Line 2, Column 0: character data is not allowed here .
    <%@ page
    &#9993;
    You have used character data somewhere it is not permitted to appear. Mistakes that can cause this error include:
    * putting text directly in the body of the document without wrapping it in a container element (such as a <p>aragraph</p>), or
    * forgetting to quote an attribute value (where characters such as "%" and "/" are common, but cannot appear without surrounding quotes), or
    * using XHTML-style self-closing tags (such as <meta ... />) in HTML 4.01 or earlier. To fix, remove the extra slash ('/') character. For more information about the reasons for this, see Empty elements in SGML, HTML, XML, and XHTML.
    thanks in advance...
    rahul

    one more thing...the code runs properly on localhost... i tested it on my pc n it was fine..both in firefox and IE...
    i guess there is a specific syntax i need to follow (strict syntax) but i dunno what it is...:(

  • Web page does not publish

    Hi all,
    it's been about 6 months since I publish my webpages.
    I created a new site, or renamed an old one (i had 3) and made a simple change, and attempted to pblish but it did not work
    1- I click publish and:
    a-I get- "logging in to mobile me" and a 2nd window (the original window setting iweb for the 1st time) asking me if I want to try mobile me for free, 60 days trial, or if "already a member"... i obviously click the latter since I am a member for 8yrs.
    b-it brings me to the system preferences, under .mac, (i'm still using 10.4.11) asking me for my password at .mac account. Not sure why it has been there for years.
    c-once I put my password, it verifies with .mac, and it is Valid.
    d- then I go back to iweb page, and it stopped attempting to "logging in to mobile me", hence also stopped to publish
    2- if I try publishing again, i have to go through a- d again! never ending chain!
    3- I attempted to click "visit" button, and get: "I web could not open the website, An error occurred when iWeb attempted to open your website".
    What's up with that???
    anyone knows what's up?
    BTW, i have been having trouble with my keychain under my user for quite some time.. it never remembers my password for my Gmail and .mac mail, but never had problem publishing to iwed until now, even while having problem with my keychain!
    Michel

    Michel Vézina wrote:
    I took a picture screen of what I see, and would love to show you. Not sure how though.
    Michel ~ Your screen shot has to be on a server, not your Mac's Desktop. To post a thumbnail link to your _screen shot_ or other image, go here:
    http://www.imageno.com
    ...upload your screenshot and from the resulting page, copy & paste the *"HTML code for webpages"* into your post. Switch from Compose mode to Preview mode to check that the clickable thumbnail works before posting. Here's an example — clicking on the thumbnail will open a new window containing a larger version:

  • Web page does not display on my browser.

    hi,
    i am trying to go to a web pae with url http://xxx:8800
    The page loads but when i enter login username & password , the processing stops there.
    the information displayed in Java Console is :
    Connenting to the servlet
    before urlConn.getOutputStream()
    strServletPath :http://192.165.214.235:8800/servlet/com.xxx.yyy.nm.em.ssgg.servlet.LogonServlet
    before urlConn.getInputStream()
    I have installed jre.13 version too.
    The page is displayed on other machines. why so? please advice what to do.
    thanxs,
    Gudiya

    Hai Gudiya:
    For which company u work?
    Maybe u should put some System.out.println() in codes to check where this stops.

Maybe you are looking for

  • How do i know if my query using  SORT_AREA_SIZE   or temporary tablespace ?

    Good Morning  Everyone ! My DB version is 10.2.0.1 I have large table  exactly 3 million records. SQL> select count(*) from tab1; COUNT(*)    300000 SQL> select * from tab1 order by no DESC; sorting  ... in process 300000 rows selected. in Terminal 2

  • Mapping to a Lookup Table

    O.K. I have a basic Java question and how to do this the following using Java/JDO: I have a database table for a lookup class. It will have the following structure: Create Table ProductStatus Id bigint not null name char (20); In C++ I would have an

  • Customer Vendor balance upload

    Hi all, how we can upload customer vendor balance .wchich template is there in DTW for Customer vendor balance upload

  • File Browser Capibilities needed from CS gone in CS2

    Someone help me to figure out how to adape the Bridge to work like File Browser did in CS. I need to be able to see the image large (larger thumbnail), see the MetaData, then click on the photo to edit it or batch process it. All this disappearing be

  • Trex Search Result List

    Hello, i would change the Search Results from Trex. Goal: I have some Files that have the name "_de". When i found one of this file i would display in the Search Result List the name of the Folder where this file was found. So i want to add a functio