"one or more of the items in your selection contains Aperture albums that are not supported in iphoto".
I have some folders in iPhoto called 'Recovered Folder'. When I try to delete them I get this message: "one or more of the items in your selection contains Aperture albums that are not supported in iphoto".
I don't use Aperture (did install it to try it out), and have deleted Aperture App from my Mac.
How can I get rid of these fodlers?
i finally figured this out:
fyi, iphoto and aperture can now share (i.e., access) the same library. apple details it here:
http://support.apple.com/kb/HT5260?viewlocale=en_US&locale=en_US
i use both iphoto and aperture, and i suspect something went amiss, at some point, while aperture was accessing my iphoto library.
this is how i fixed the problem:
i launched aperture, then (per the instructions linked above) switched to (i.e., accessed) my iphoto library. i was then able to delete the "recovered folder" and the album it contained. i then quit aperture and relaunched iphoto.
NOTE: at that time, although i expected the "recovered folder" to be gone, it was still present. but this time, i was able to delete the folder from within iphoto without the "contains aperture items" error message.
(Sparky030405, i realize you've since deleted aperture. while i can't say my method is the *only* way to solve this problem, it's the way i was able to solve it. so, you might consider reinstalling aperture in order to delete the folder, then uninstalling aperture, once again.)
Similar Messages
-
Why I cant view my picture on my iphoto and if I try to copy to any folder it Shows "The item on the clipboard cant be pasted to this location. (One or more of the item may have been deleted or are no longer available) "
There are 9 different versions of iPhoto and they run on 9 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Include things like:
- What version of iPhoto.
- What version of the Operating System.
- Details. Describe the problem as fully as you can. For example, if you have a problem with exporting, then explain by describing how you are trying to export, and so on.
- History: Is this going on long? Has anything been installed or deleted? - Are there error messages?
- What steps have you tried already to solve the issue.
- Anything unusual about your set up? Or how you use iPhoto?
Anything else you can think of that might help someone understand the problem you have. -
When I try to print my book, I receive the following error message: One or more of the images in your book are not presently available at full resolution. Please reconnect to these files by mounting the volume(s) containing the original images. I don't understand what this means since all the photos are in the book. Can someone please clarify?
When you look at the images in the browser, do you see any arrow icons on your thumbnails? Like these:
When you import your images from a folder on your system drive, you have two ways to import:
Managed: Import and store the images in the library
Or referenced: Leave the images in the folder outside the Aperture library.
This is controlled by the "Store Files" settings in the Import panel:
If you did not set "Store files" to "In the Aperture Library", the originals will stay in the folder outside.
The error message you get, suggests that Aperture assumes the original files are in a folder outside the library.
Select one of your images in the Browser and use the command "File > Show in Finder" - is this command available or dimmed out? -
There are dozens of entries regarding "
List does not exist / The page you selected
contains a list that does not exist. It may have been deleted by another user" and none of them are really SP 2013 so i thought I would create this entry.
I am getting the error above after creating a simple list with 4 columns. the list is created during a new site definition activation but when I click on my list, I get the error above. the list works if I deactivate the feature and re-activate
it. but has the error whenever the new site definition is created.
Has anybody encountered this issue on SP 2013?Hi,
For your issue, there are plenty of possible reasons offered when we search this issue online.
Here are similar issue posts, check whether they are helpful:
http://sharepoint.stackexchange.com/questions/98239/list-does-not-exist-error-when-opening-the-views
http://sharepoint2u.com/?p=56https://shareyourpoint.wordpress.com/2012/04/12/list-does-not-exist-the-page-you-selected-contains-a-list-that-does-not-exist-it-may-have-been-deleted-by-another-user-sharepoint-2010-error/
http://spnovice.blogspot.com/2012/10/list-does-not-exist-or-does-it.html
Best Regards,
Lisa Chen
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Lisa Chen
TechNet Community Support -
Hi everybody!
I have a sharepoint 2013 farm with 5 sever. I upgraded a site from sharepoint
2007 to sharepoint 2013. I had some problems to install and configure workflow manager and register it. but by now I found problems and I can create a workflow and run it successfully. My big problem is when I try to get a lookup field in my flow. the
flow suspended and I got the following error:
“List does not exist . The page you selected contains a list that does not exists. It may have been deleted by another user.”
Any solution???
Thanks in advance!Hi,
Please make sure the source list of the lookup column and the list which consumes the content from the lookup column exists on the site collection.
In addition, to correct this problem the following steps should be applied:
Delete the affected Workflow association
Go to "Central Administration" - "Application Management"
Select the affected web application and choose "General Settings" - "Resource Throttling"
Increase the value configured as "List View Lookup Threshold"
Perform an iisreset to ensure that all in memory instances of the web application settings are gone
Add the Workflow association back to the list
More information is here:
http://social.technet.microsoft.com/Forums/en-US/3aeeba20-07dd-4e46-941b-a3db1bb3577e/sharepoint-2013-designer-workflow-the-page-you-selected-contains-a-list-that-does-not-exist?forum=sharepointcustomization
Best Regards
Dennis Guo
TechNet Community Support -
Will any of the features of iOS6 that are not supported on IPod touch 4 now be available in future software updates?
We are users, this is not an Apple forum. We know nothing more about future products.
-
I Created a power view in Excel 2013 and uploaded to my Power BI for o365 site.
But when i click on my excel file it opens in browser,After that i click on File tab its showing me two option
1. Save a Copy
2.Download a copy
When i click on save a copy its showing me an warning below
Features that are not supported by Excel in the browser and interactive reports will be removed from the saved copy.
Continue with Save?
If i continue saving it only saves an excel files with data only not the power view which i want to save with applied filters.
Please help me for thisJust to clarify, when you hit the option of Save As Copy, the whole experience goes into a "read-write" mode in Excel services, which currently doesn't support authoring, just consumption of PowerView sheets.
Two mitigations that come to mind:
1. Download the copy (as Brad suggests), rename the file and upload.
2. Use the send to option of SharePoint online, give the file the right target document library (can be the same as source) and rename the file:
GALROY -
The document “PP_CS_Higher Education_USA_V1” is on a volume that does not support permanent version storage. Not sure what this means exactly.
Any thoughts out there?This error is is usually encountered when trying to update a file that has been opened from a CD or DVD disc.
Move the file to the desktop before you open it.
Where is this file stored, a CD or DVD, external hard drive, USB memory ? -
Are there any specific files (other than swf) that are not supported in the content viewer?
Specifically -- Is there a limitation as to any content in a PDF that would keep it from displaying correctly other than swf?
-
After a recent upgrade, I've completely lost iPhotos and all my pholto files.
It now comes up with 'You cant open the application iPhoto because it is not supported on this type of Mac'
Any ideas whats gone wrong?Reinstall it:
To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2. Download it from the App Store to reinstall It's on your Purchases List* there.
For older versions that have been installed from Disk you'll need these additional steps:
2a: On 10.5: Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
2b: On 10.6: Those receipts may be found as follows: In the Finder use the Go menu and select Go To Folder. In the resulting window type
/var/db/receipts/
2c: on 10.7 or later they're at
/private/var/db/receipts
A Finder Window will open at that location and you can remove the iPhoto pkg files.
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
*Sometimes iPhoto is not visible on the Purchases List. it may be hidden. See this article for details on how to unhide it.
http://support.apple.com/kb/HT4928
One question often asked: Will I lose my Photos if I reinstall?
iPhoto the application and the iPhoto Library are two different parts of the iPhoto programme. So, reinstalling the app should not affect the Library. BUT you should always have a back up before doing this kind of work. Always. -
My itunes library is on my PC. It has Apple purchased and other music. Can I sync everything with my iPAD and how? I'm having difficulties getting the "non-Apple" music sync'd.
You should be able to sync them from your computer's iTunes to your iPad and/or iPhone. Connect your iPad or iPhone to your computer and select it on the left-hand sidebar of your computer's iTunes (you can enable the sidebar via control-S on a PC), and then use the Music tab on the right-hand side of the iTunes to select and sync the music that you want in the iPad/iPhone's Music app
Syncing media : http://support.apple.com/kb/HT1351 -
The Master Password Box will request the password for any site that I open including sites that I do not have the password stored.
== This happened ==
Every time Firefox opened
== I entered Gmail or YahooStart Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
You can use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
You have to close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit") -
I have done what the forums ask which is to ensure that the computer is activated in iTunes.
Still no joy. I am getting extremely frustrated as this has been going on for a long time an I just abandon every time, it does not endear me to the technology and I question the sanity of those who love Apple so much.
Please help, I feel held to ransom if I have to re-purchase what is already mine.
ThanksI have done what the forums ask which is to ensure that the computer is activated in iTunes.
Still no joy. I am getting extremely frustrated as this has been going on for a long time an I just abandon every time, it does not endear me to the technology and I question the sanity of those who love Apple so much.
Please help, I feel held to ransom if I have to re-purchase what is already mine.
Thanks -
Message uses a character set that is not supported by the internet service
Does any one have any advice on how to fix this problem?
E-mails sent from my iphone 3G periodically arrive in an unreadable form at the recipient. The body of the e-mail has been replaced with the message "This message uses a character set that is not supported by the internet service...." The problem e-mails also include an attachment that contains an unformatted text file containing the original message surrounded by what appears to be lots of formatting data that is displayed as gibberish.
This occurs sometimes, but not always, even with the same recipients. I am sending e-mail through a G-mail account that is configured on the iphone using IMAP. I have tried the gmail account to use the two available formatting options for mail, but neither fixes the problem.
I have also upgraded to 2.01 and restored a few times without impact.Hi,
I got somewhat similar problem with special charecters(German umlaud �,�,�..).
I create a file with java having special charecters in it. Now if I open this file I am able to view the special charecters in it.But If I attach this file send it using following code then receiver can not see the umlaud charecters in it.They get replaced by _ or ?
MimeBodyPart mbp2 = new MimeBodyPart();
FileDataSource fds = new FileDataSource(fileName);
mbp2.setDataHandler(new DataHandler(fds));
mbp2.setFileName(output.getName());
Multipart mp = new MimeMultipart();
mp.addBodyPart(mbp2);
msg.setContent(mp);
Transport.send(msg);
From you message it looks like you are able to send the mail attachment correctly(by preserving special charecters).
Can you tell me what might be wrong in my code.
I appriciate your efforts in advance.
Prasad -
I cant send pic messages to iphone users. I get the error message: "one or more of the message components have been delted by MMS Adaptation. Either the message was too large or the components were unsuitable for your handset". This only seems to be an issue to iphones. I like this phone but have had nothing but trouble since day one. I am so tired of being on the phone with verizon and still not getting all the problems corrected. Someone please help!
Hello christina267,
Help is right here, front and center! Let's get your mms working properly. May I ask are you using the original stock messaging app to send texts and mms? Also, are you using any special characters or emojis in your message? Since you state that the issue is to iPhones, did you happen to have used an iPhone on your mobile number just before you were using the Galasy S 5? As you share the details then we can investigate.
Thank you…
ArnettH_VZW
Follow us on Twitter @VZWSupport
Maybe you are looking for
-
How to put Tool Tip in JSP page
Hello. How can i put Tool Tip in JSP page and also html page.
-
My G41 has developed a LCD display problem. There are two very fine lines that runs from top to bottom of the display approx. 1 cm from the left edge of the display. Running display diagnostic provides no help. Could this be a driver problem? Thi
-
Oracle 9i in UNIX (AIX)
Hi, I am new to the UNIX environment. We are installing a 9i suite in a UNIX (AIX) box. Is there anyway I can use the Enterprise Manager console in this machine? or do I have to use x-windows? How can I access the database remotely from my windows xp
-
There is no standard smartform for PO In ECC 6.0 R-2
HI Experts I am not able to getting smartform in my system how can i installed smartform in my system My version Is Ecc 6.0 With R-2 Kindly provide all documentation regarding Installation Of smartform Help Me Out Need exact solution donu2019t pu
-
Manufacturing involves 2 processes - A and B. In process A, multiple SKU are processed (group of SKU are processed as one material). In process B, each SKU is processed individually. This scenario is like variant configuration in production order (in