One pixel difference between rendered video and composition

I have a non-standard dimensions (767 x 454) in my composition, but the finished render becomes (766 x 454). Does video generated need to have even-numbered dimensions? If not, how can I get it use to 767?
Thanks,

Depends on the CoDec. Most compression methods involving visual compression (MPEG etc.) are indeed based on multiples of 2, 4, 8, 16 and so on, so this is normal. Only algorithms that only use compression on the binary level do not suffer this limitation (QT Animation, PNG etc.) but even then you can find many who are locked into specific resolutions and field settings because they provide optimized routines for standard broadcast resolutions such as e.g. the Avid CoDecs do.
Mylenium

Similar Messages

Difference between ipod video and a ipod v2

can anyone tell me the difference between ipod video and a ipod v2 video?

Brighter Screen
Longer Battery Life
New Search Feature
"Largest" model is available with an 80GB capacity instead of a 60GB capacity.

Quality difference between S-video and RCA

Can someone tell me what's the difference (in quality) between S-video out and RCA out?
I'm using RCA out because with s-video, the image shows up in black and white on my TV.
It would help to know I'm not loosing too much quality this way...
Regards everyone.

pauliewog is speechless
But what Robi says is true!
The various forms of (analogue) signal transfer are, in descending order of quality:
RGB - The Red, Green and Blue signals are generated by the PC (say), and connected by separate wires to ultimately control the Red, Green and Blue electron guns of the display monitor/TV set. The standard 15-pin "VGA" connector is RGB (plus H and V synchronising pulses).
YUV - Also called Component, and YCrCb, as found on DVD players. The Y is the luminance, or Black-and-White component, while the Cr and Cb are the Differences between the Y and the Red and Blue signals respectively. Usually, the Y signal has higher bandwidth than the Cr and Cb signals (twice as many Y samples as Cr and Cb samples on the DVD). Still needs wires, but the Sync is added to the Y signal.
Y/C - aka S-Video. The Y is as above, but the Cr and Cb signals are used to modulate a subcarrier (3.579545MHz for NTSC, 4.43361875MHz for PAL), with one of the signals effectively at 90 degrees to the other - the C signal. The bandwidths of the colour difference signals need to be bandwidth limited to about 1/3 of the subcarrier frequency (about 1.7MHz for PAL from memory), compared to the Y bandwidth of 5MHz for broadcast television. In PAL, the phase of one of the signals is inverted every other line (PAL = Phase Alternating Line, aka Peace At Last). Transmission errors which result in green faces and purple trees in NTSC (National Television Standards Commitee, aka Never Twice the Same Colour) tend to desaturate the colours instead.
CVBS, aka Composite Video (also RCA, named after the company that developed the type of connector used, which is typically yellow for video). The Y and C (and sync) signals are combined one one wire. The TV has a harder job of separating them back to RGB :(
RF (Radio Frequency). The CVBS signal is modulated onto an RF carrier, which could be anywhere between about 45MHz and about 1000MHz (not counting satellite distribution), so that it looks the same as a broadcast TV station to a TV set, and connects via a single cable to the antenna socket of a TV set. So first the TV has to demodulate the signal back to CVBS, before separating the Y and C, then separating the C into Cr and Cb and putting into a matrix with the Y to get RGB back. Nevertheless, this is a useful technique for distributing a signal to a lot of TV sets over a reasonably large area. It is also the only method that works with old TVs without A/V inputs - which is why game consoles used to come with an RF Modulator (aka RF Converter) as standard.
The above methods are also in descending order of signal bandwidth, which restricts the available resolution, or the finest horizontal detail (especially colour detail). Generally, 800x600 is about as good a resolution as you can expect to get on a TV display without resorting to special enhancing techniques.
The above is probably a lot more detail than you need, but is still a fairly superficial explanation. But study it up, the test is next Monday at 9am :D
Cheers

HT2729 what exactly is the difference between regular video and video playback?

i am wanting to purchase a black video playback ipod with 30 gb, the fifth generation and before i get it i would like to know all the details about video playback

i am wanting to purchase a black video playback ipod with 30 gb, the fifth generation and before i get it i would like to know all the details about video playback
http://support.apple.com/kb/SP41

Difference between inbound delivery and Goods Receipt

Can any one explain difference between inbound delivery and goods Receipt??

Hi dear,
Inbound delivery is one confirmation used to indicate the expected goods receipts in advance, so that the related process partners like warehouse personnel , planning personnel can utilise this data for initiation of actions and planning. Also , we can make this confirmation relevant to Planning in the customisation, to enhance the performance.
In general , we need confirmations only as a kind of assurance/information , in absence of the goods.
But if the goods are received physically , obviously we do not need any confirmations , we would perform the goods receipt .
When working with Inbound delivery , the goods receipt is done with respect to specific inbound delivery( though not compulsary to do so) , so that the integration done in the system works to the advantage of the users.

Differences between 11.x and 9.x??

Hi Frndz,
Could any one gimme differences between 11.x and 9.x systems?
Thanks

Have a look at the cumulative feature tool - https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&id=1092114.1
It will allow you to pick the versions and see the new features within each version by product
Cheers
John
http://john-goodwin.blogspot.com/

Is there Any difference Between OBPM 10g And AlBPM 6.0

Hello Friends
I would like know is There any difference between the Oracle BPM 10g and ALBPM 6.0 . ??
The second one is Difference between AlBPM5.7 and ALBPM 6.0
Thanks In Advance
with Regards
Sandeep
Edited by: user12036530 on Oct 18, 2009 9:08 PM

For 10g Differences, check out: http://download.oracle.com/docs/cd/E13154_01/bpm/docs65/upgradeguide/deliverables/upgrade_guide/c_Head_Reference.html
And other 10g Documentation: http://download.oracle.com/docs/cd/E13154_01/bpm/docs65/index.html Specifically: Upgrade Guide, Process API Differences (if you use PAPI)
For 6.0 Differences, check out the Documentation: http://download.oracle.com/docs/cd/E13165_01/albsi/docs60/index.html Specifically: ALBPM 6.0 New Features Overview
Hope this helps,
-Kevin

Difference between Assignment UDF and Resouce UDF

Can any one explain difference between Assignment UDF and Resource UDF.
where do we use those UDFs.

Assignment UDFs are categories applying to resources and can differ from project to project. Resource UDFs are categories applying to resources in general and will remain the same from project to project. The best example I can think of are locations of your labor resources. Say you have projects in various locations throughout the country and your labor resources travel between projects or activities often. You could create UDFs for the location each resource will be traveling from. "Home Location" would be a resource UDF because the home location of the resource remains the same regardless of the project, but "Departing Location" could be an assignment UDF and might vary depending on which project he is travelling to and when.

I do video productions for a small local TV station. I use Final Cut Express to edit. I need a new video camera but am at a loss as to what to buy. I know I will get a digital camera but do not know the difference between just digital and digital HD.

I do video productions for a small local TV station. I use Final Cut Express to edit. I need a new video camera but am at a loss as to what to buy. I know I will get a digital camera but do not know the difference between just digital and digital HD. Also, I can not afford an expensive camera and need some advice on which of the available cameras would be best and also work well with a Mac. One last issue, I currently use a Panasonic #CCD camera that takes a tape. When I load video to Final Cut the audio and video are out of sinc. Go figure. Can anyone help with these questions. Karen

Hello Karen,
If you are using Final Cut Express, then look for camcorders that are AVCHD camcorders. Look especially for the AVCHD logo and specific mention of AVCHD in the specs. Most of the major manufacturers produce good quality camdcorders - Canon, Sony, etc.
Also, be aware that there are a lot of "not quite AVCHD" camcorders on the market (sometimes they say they record video as MPEG4-H.264/AVC) - buyer beware!
Most everything you are going to find on the market today is HD, which stands for "high-def".
Regarding your question about the Panasonic camcorder, it's best if you post that as a separate question, and please identify the specific model camcorder and the Easy Setup you are using in FCE.

Difference between Temp table and Variable table and which one is better performance wise?

Hello,
Anyone could you explain What is difference between Temp Table (#, ##) and Variable table (DECLARE @V TABLE (EMP_ID INT)) ?
Which one is recommended to use for better performance?
also Is it possible to create CLUSTER and NONCLUSTER Index on Variable table?
In my case: 1-2 days transactional data are more than 3-4 Millions. I tried using both # and table variable and found table variable is faster.
Is that Table variable using Memory or Disk space?
Thanks Shiven:) If Answer is Helpful, Please Vote

Check following link to see differences b/w TempTable & TableVariable: http://sqlwithmanoj.com/2010/05/15/temporary-tables-vs-table-variables/
TempTables & TableVariables both use memory & tempDB in similar manner, check this blog post: http://sqlwithmanoj.com/2010/07/20/table-variables-are-not-stored-in-memory-but-in-tempdb/
Performance wise if you are dealing with millions of records then TempTable is ideal, as you can create explicit indexes on top of them. But if there are less records then TableVariables are good suited.
On Tables Variable explicit index are not allowed, if you define a PK column, then a Clustered Index will be created automatically.
But it also depends upon specific scenarios you are dealing with , can you share it?
~manoj | email: http://scr.im/m22g
http://sqlwithmanoj.wordpress.com
MCCA 2011 | My FB Page

I need to know the difference between planned SKF and Actual SKF from business view and when I can use one of them ?

I need just to know the difference between plan SKF and Actual SKF in business example and when I use one of them.
thanks

Hi Salaam,
Statistical Key Figure (SKF) is a base to allocate the cost between cost centers. Usually, common cost centers cost should allocate to respective department cost centers on monthly basis.
Some of SKFs are: Calculating floor rent on SFT, Telephone charges on No. of units, and employees head count is with "Each" in SAP.
Apart from Ajay's reply, you can consider the Canteen exp in an organization. Assume Admin, Fin and Mfg departments are getting food services from Canteen. Here, total monthly cost of Canteen exp should be allocated to respective departments. Here, we use SKF as total head count of each department and distribute the cost.
Planned SKF is what you planned on the beginning of a period. (Assume head count was planned as 30 in the month beginning)
Actual SKF is what exactly you consumed over the period. (Actual employees provided canteen services during the month is 25)
BR, Srinivas Salpala

Difference between photoshop cc and photoshop cc 2014 how do i know which one I am using?

difference between photoshop cc and photoshop cc 2014 how do i know which one I am using?

Hi Petereas,
Both are different version of Photoshop application.
In Photoshop CC 2014 there are several new feature introduced than CC.
Please refer the following page on whats new in Photoshop 2014.
Photoshop Help | New features summary
When you go to Help>About Photoshop then Photoshop 2014 shows version 2014.0.0 Release.
Hope this helps.
Thanks and Regards,
Sumit Singh

Difference between copy value and use one as many

hi
what is the difference between copy value and use one as many?
thanks

[http://help.sap.com/saphelp_nw2004s/helpdata/en/26/d22366565be0449d7b3cc26b1bab10/content.htm]
[http://help.sap.com/saphelp_nw2004s/helpdata/en/ef/df564b6aa24fc9ab0d685460747de5/content.htm]
Much better understanding of UseOneAsMany: [http://help.sap.com/saphelp_nw2004s/helpdata/en/38/85b142fa26c811e10000000a1550b0/content.htm]
Edited by: Praveen Gujjeti on Feb 18, 2010 11:42 AM

Wich ones are the differents between iPhone 4 and iPhone 4s?

Well I posted this because I am about to get iPhone 4S, but I am having a couple of questions, but the main question is wich ones are the differents between iPhone 4 and iPhone 4s?

See http://www.apple.com/iphone/compare-iphones/.

List of differences between PSE 40 and PSE30

A lot of users are asking what are the differences between PSE 30 and PSE 40.
This Thread provides information on this subject. First, you will find information copied from the section "New Features" of the useful "Adobe Photoshop Elements 4.0 User Guide". Then later on, you might find additional information on the same subject provided by users of PSE.
--- Start of copy of information in the PSE 4.0 User Guide ----
1 What's new in PSE 4.0
1.1 Editing and selection
1.1.1 Magic Selection Brush tool
Easily and accurately select portions of your photos using this new tool in either Standard Edit and Quick Fix. Simply scribble or place dots on the object you want to select -no need to precisely outline the object- and Adobe Photoshop Elements selects the object for you. You can add to or subtract from the selection by using additional tools in the options bar. (See User Guide "To use the Magic Selection Brush tool" on page 193.)
1.1.2 Magic Extractor.
Easily select an object in a photo and extract it from its background. Just scribble or place dots on
the object you want to extract; then scribble or place dots on the background, and Photoshop Elements separates the object from its background. This tool is perfect for creating composites or scrapbook images. (See User Guide "To use the Magic Extractor" on page 194.)
1.1.3 Skin tone adjustment
Click an area of skin and watch the tonal balance of all colors in the photo improve. If you
want, you can also manually adjust the color by using color sliders. (See User Guide "To adjust the color of skin tone" on page 224.)
1.1.4 Red eye removal
Automatically remove red eye during import, or select one or more files and easily remove red eye
in either the Organizer or the Editor. (See User Guide "To remove red eye" on page 249.)
1.1.5 Defringe
Automatically remove the colored specs or halo around the edges of a selection. (See User Guide "To defringe a Selection" on page 200.)
1.1.6 Straighten tool
Straighten and crop crooked photos by drawing a horizontal or vertical line in the image. Photoshop
Elements aligns the photo to that line. (See User Guide "To straighten an image" on page 243.)
1.1.7 WYSIWYG font menu
What you see is what you get -see what each font looks like from within the font menu. (See
User Guide "To choose a font family and style" on page 332.)
1.2 Sharing and printing
1.2.1 One-click printing (US, Canada, Japan only)
Order prints and professional hardbound photo books directly from Photoshop Elements simply by dragging the items to the Order Prints palette. (See User Guide "To use the Order Prints palette (US, Canada, Japan only)" on page 401.)
1.2.2 Slide shows on TV
If you have Windows¨ XP Media Center 2005 installed, you can view your Photoshop Elements
slide shows on your TV and navigate using your TV remote control. (See User Guide "To output a slide show" on page 354.)
1.3 Tagging and organizing
1.3.1 Face tagging
Select a group of photos and let Photoshop Elements isolate and display all the faces so that you can
quickly tag them. The Find Faces dialog box displays thumbnails of each face until you tag it. (See User Guide "To automatically find faces for tagging" on page 101.)
1.3.2 Search by metadata
Search for a variety of metadata criteria, such as file name, file type, shutter speed, camera
model, date, and tags. You can search on multiple criteria at once. (See User Guide "To find photos by details (metadata)" on page 89.)
1.3.3 PDF support
Manage and tag PDF files in the Organizer. PDF files remain intact as one file that you can tag. Open
the PDF in the Editor to extract individual pages. (See User Guide "To open a PDF file" on page 148.)
--- Continuation in next Post of this Thread ----

--- Continuation from previous Post -----
2 What's changed in PSE 4.0
2.1 Editing and selecting
2.1.1 Crop tool
Freely change image size boundaries while cropping an image. When you're happy with your crop marks,
click the Commit button , which is now conveniently located at the bottom right corner of the crop border. (See User Guide "To crop an image" on page 240.)
2.1.2 Paragraph text
Create paragraph text by dragging a border with the Text tool. The text you enter inside the border
wraps to remain inside the boundaries. (See User Guide "To add text" on page 329.)
2.1.3 Quick Fix
Use the newly enhanced automatic correction options for the most common photo flaws. (See User Guide "To correct color in Quick Fix" on page 207.)
2.1.4 Easier color management
Easily get the color you expect when printing. N ew options and improved embedded
profile support streamline color management. (See User Guide "About color management" on page 236.)
2.1.5 Advanced camera raw
Fine tune exposure and lighting by working with the raw data from your digital camera, and
easily export photos to the universal DNG format. (See User Guide "About camera raw image files" on page 159.)
2.1.6 Artifact reduction
Quickly remove noise caused by shooting in low light or with ISO camera settings by using the
new Remove JPEG Artifacts option in the Noise filter. (See User Guide "Reduce Noise" on page 289.)
2.2 Sharing and printing
2.2.1 Multimedia slide shows
Create feature-rich slide shows with all the new tools and options available in the Slide Show
Editor:
a) Gracefully move from one image to another by adding interesting transitions between each slide. You can choose from over 50 transitions, such as dissolves and doors. (See User Guide "To add and edit transitions" on page 352.)
b) Add text and graphics with the click of a button. (See User Guide "To add text to a slide" on page 348 and "To add clip art graphics to a slide" on page 347.)
c) Make your slide show feel more like a video by panning and zooming your slides. For instance, you can pan from a face on the left side of an image to a face on the right side of the image. (See User Guide "To set pan and zoom" on page 350.)
d) Add background music, make the duration of your slides match the duration of your audio, and narrate your slides all with the click of a button. (See User Guide "To add music to a slide show" on page 347 and "To add narration to a slide" on page 350.)
e) Quickly reorder or edit your slides without leaving the Slide Show Editor. (See User Guide "To reorder slides" on page 346.)
f) Preview anytime by clicking the Preview button, and then output your slide show by burning a DVD (if you have Adobe ' Premiere' Elements installed), sending it in e-mail, sharing it online, or sending it to your TV. (See User Guide "To output a slide show" on page 354.)
2.2.2 Photo mail
Turn plain e-mail into theme-based Photo Mail with enhanced and easier to use captions. (See User Guide "To send a photo using Photo Mail" on page 407.)
2.2.3 Desktop wallpaper
Create original desktop wallpaper using multiple photos. (See User Guide "To use photos as desktop
Wallpaper" on page 367.)
2.2.4 Creations
Create your own cards, calendars, and photo albums, and then print them on your printer, upload them
to the web, or burn them to CD. (See User Guide "About creations" on page 343.)
2.3 Viewing, tagging, and organizing
2.3.1 Faster download
Use the enhanced Photo Downloader to quickly download photos from your digital camera and
mobile phone, even when Photoshop Elements is not running. (See User Guide "To get photos from a digital camera or card reader" on page 62.)
2.3.2 Full Screen and Side By Side View
View your photos in full screen without the clutter of command menus and tools.
(See User Guide "Viewing photos at full screen or side-by-side" on page 76.)
2.3.3 Automatic organization and view options
View your photos as arranged automatically by date, or use the intuitive
Date View or the enhanced Folder Location view. (See User Guide "To sort files in the Photo Browser" on page 71.)
2.3.4 Address book
Import your addresses from Microsoft Outlook address book or vCards. (See User Guide "Using the contact Book" on page 404.)
2.3.5 Captions
Add captions to multiple photos at once. Open and edit audio captions by simply clicking the Audio
icon in thumbnail view in the Photo Browser. (See User Guide "To add captions to files" on page 123 and "To add audio to a photo" on page 124.)
--- End of Information Copied from the Adobe PSE 4.0 User Guide

One pixel difference between rendered video and composition

Similar Messages

Maybe you are looking for