One problem with constraints missing in source and target database....
DB Gurus,
In my database I am going to export and import data using datapump but dont specify CONTENT clause.
so when I start working on my application, I came to know there are some constraints are missing. now how to check what are the constraints are missing from Source database and how to create those missing constraints on Target database?
Suggest me if you have any idea.
Create a database link between source and target schema.
Use all_/dba_/_user_constraints to generate the difference using MINUS operator.
something like this:
select owner,constraint_name,constraint_type from dba_constraints@source
MINUS
select owner,constraint_name,constraint_type from dba_constraints
Similar Messages
-
Issue in OWB mapping - when changing source and target database
Hi,
I need help for resolution of the issue I am facing when moving mapping from development environment to QA.
Here is situation,
We develop ETL using one source, one staging and one target database.
In development we use one control_center for Source to staging and another control center staging to target.
All works fine in development.
Now I have created new runtime repository and imported all OWB projects (with full dependencies, exact replica of development). Now I need to change source and staging and target as different database.
I have created new database location connections and defined/attached DB connectors with stage and target location.
Now issues are
1. Two Staging mapping are not able to bound with source table (giving different error
a. One mapping show error for source synonym translation no longer valid when deploying this mapping , but validation comes without any issue)
b. Other mapping show error for source table/object not bound to repository
2. All the target mapping show validation successful, but when deploying says “table or view does not exist”. But tables are exists on source stage and target. (also permission are set correctly for target user to read from staging tables).
Not sure how to proceed from here.
I have recreated new repository and re-imported all project/mappings and defined all connection but still same issue.
Thanks in advance,
Vipin1. Two Staging mapping are not able to bound with source table (giving different error
a. One mapping show error for source synonym translation no longer valid when deploying this mapping , but validation comes without any issue)
b. Other mapping show error for source table/object not bound to repository
The above error were resolved when re-synchronized the table (for few I have to reimport the table) and mapping.
2. All the target mapping show validation successful, but when deploying says “table or view does not exist”. But tables are exists on source stage and target. (also permission are set correctly for target user to read from staging tables).
The above error still pending. My target mapping are not able to deployed/compiled.
For the above I have defined one Staging location to one target target location and target location have connector to staging (not sure if I have to define connector name same as staging location, as I have created DB connector with different name but reference database is same as staging location).
Mapping are assoicated with desired data locatoin and meta data.
control center is also have that data location.
Mapping are configured for the desired location. -
Problem with Date - Text File Source and Oracle Target
Hi All,
I have a source data (text file) with date column in the format of 'MM/DD/YYYY'. My target is oracle. I am using the LKM FILE TO SQL and IKM SQL Control Append. When i execute this interface, i am getting an error as
7000 : null : com.sunopsis.jdbc.driver.file.b.i
com.sunopsis.jdbc.driver.file.b.i
at com.sunopsis.jdbc.driver.file.b.f.getColumnClassName(f.java)
at the Load Data step.
How to load date columns from text file to oracle tables? Please help me in resolving this...
Thanks in Advance,
Ram Mohan TThe worst solution is to define for your text file the date as a string and then to rebuild your date type in Oracle.
something like
convert(Substr(myfield,4,2)||Substr(myfield,1,2)||Substr(myfield,7,4) ,'MMDDYYYY')
this is maybe the worst solution but it should work.
Regards
Brice -
Problem with Crystal reports for Eclipse and Postgres-databases
Hi,
Is there a known problem when using a PostgreSQL-database to create a report with Crystal reports Plugin? When I drag a table, then occurs a error-windows, that the object can't created.
I have found a workaround for solving the problem. After new installing Eclipse Platform Version: 3.4.1 Build id: M20080911-1700 and Crystal reports Plugin 11.8.6.v1371 with JRE 1.6.0_01 the error message allways occurs, when I select a table from a PostgreSQL database (Version 8.2). After restarting eclipse you see the last selected tables in the field explorer and you can drag the table fields in the report. A repeated choice of the same table causes aliases for the table in the field explorer after restarting eclipse.
Error.log:
eclipse.buildId=M20080911-1700
java.version=1.6.0_01
java.vendor=Sun Microsystems Inc.
BootLoader constants: OS=win32, ARCH=x86, WS=win32, NL=de_DE Command-line arguments: -os win32 -ws win32 -arch x86
Error
Tue Dec 16 14:03:53 CET 2008
Verursacht durch: java.lang.IllegalArgumentException
com.businessobjects.crystalreports.designer.core.ReportException: java.lang.IllegalArgumentException
at com.businessobjects.crystalreports.designer.core.ExceptionFactory.B(Unknown Source) at com.businessobjects.crystalreports.designer.core.ExceptionFactory.create(Unknown Source) at com.businessobjects.crystalreports.designer.core.elements.data.TableElement.add(Unknown Source) at com.businessobjects.crystalreports.designer.core.commands.AddCommand.doCommand(Unknown Source) at com.businessobjects.crystalreports.designer.core.commands.ReportCommand.C(Unknown Source) at com.businessobjects.crystalreports.designer.core.commands.ReportCommand.execute(Unknown Source) at com.businessobjects.crystalreports.designer.CoreCommand.execute(Unknown Source) at com.businessobjects.crystalreports.designer.dseintegration.DSEDropHandler.drop(Unknown Source) at org.eclipse.jface.util.DelegatingDropAdapter$3.run(DelegatingDropAdapter.java:211)
at org.eclipse.core.runtime.SafeRunner.run(SafeRunner.java:37)
at org.eclipse.core.runtime.Platform.run(Platform.java:880)
at org.eclipse.ui.internal.JFaceUtil$1.run(JFaceUtil.java:48)
at org.eclipse.jface.util.SafeRunnable.run(SafeRunnable.java:175)
at org.eclipse.jface.util.DelegatingDropAdapter.drop(DelegatingDropAdapter.java:209)
at org.eclipse.swt.dnd.DNDListener.handleEvent(DNDListener.java:90)
at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:84)
at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1003)
at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1027)
at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1012)
at org.eclipse.swt.widgets.Widget.notifyListeners(Widget.java:770)
at org.eclipse.swt.dnd.DropTarget.Drop(DropTarget.java:455)
at org.eclipse.swt.dnd.DropTarget$3.method6(DropTarget.java:257)
at org.eclipse.swt.internal.ole.win32.COMObject.callback6(COMObject.java:119)
at org.eclipse.swt.internal.ole.win32.COM.DoDragDrop(Native Method) at org.eclipse.swt.dnd.DragSource.drag(DragSource.java:362)
at org.eclipse.swt.dnd.DragSource.access$0(DragSource.java:288)
at org.eclipse.swt.dnd.DragSource$1.handleEvent(DragSource.java:171)
at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:84)
at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1003)
at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:3823)
at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3422)
at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:2382)
at org.eclipse.ui.internal.Workbench.runUI(Workbench.java:2346)
at org.eclipse.ui.internal.Workbench.access$4(Workbench.java:2198)
at org.eclipse.ui.internal.Workbench$5.run(Workbench.java:493)
at org.eclipse.core.databinding.observable.Realm.runWithDefault(Realm.java:288)
at org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Workbench.java:488)
at org.eclipse.ui.PlatformUI.createAndRunWorkbench(PlatformUI.java:149)
at org.eclipse.ui.internal.ide.application.IDEApplication.start(IDEApplication.java:113)
at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:193)
at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLauncher.java:110)
at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.java:79)
at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:386)
at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:179)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:549)
at org.eclipse.equinox.launcher.Main.basicRun(Main.java:504)
at org.eclipse.equinox.launcher.Main.run(Main.java:1236)
Caused by: com.crystaldecisions.sdk.occa.report.lib.ReportSDKException: java.lang.IllegalArgumentException---- Error code:-2147467259 Error code name:failed at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(Unknown Source) at com.crystaldecisions.proxy.remoteagent.x.a(Unknown Source) at com.crystaldecisions.proxy.remoteagent.q.a(Unknown Source) at com.crystaldecisions.sdk.occa.report.application.dd.a(Unknown Source) at com.crystaldecisions.sdk.occa.report.application.ag.a(Unknown Source) at com.crystaldecisions.sdk.occa.report.application.bu.if(Unknown Source) at com.crystaldecisions.sdk.occa.report.application.bu.void(Unknown Source) at com.crystaldecisions.sdk.occa.report.application.a6.for(Unknown Source) at com.crystaldecisions.proxy.remoteagent.u.performDo(Unknown Source)
Best Regards
ArnoldYour issue appears to be a Crystal Reports for Eclipse report designer thing, and not a JRC runtime thing. The JRC runtime does support Type 4 JDBC drivers, but all modern PostgreSQL drivers are Type 4.
The current report designer is more restrictive than the JRC runtime - and PostgreSQL, being not on the supported platforms list, has never been tested with the embedded designer.
Unless there's anybody out there with experience with PostgreSQL and CR4E designer, who would be willing to share their experiences.
Sincerely,
Ted Ueda -
Do you understand me ? I want money back.Because I have problem with LINE In App Purchase.And no one try to resolve this problem.And the answer of NEVER LINE JAPAN they don't have responsibility.I think it will be effect with APPLE image also.I want you to help me everyways to refound my monet back.Could you?
Contact iTunes Store Support.
-
Hello i have one problem with my ipod touch 4th gen....when i try to log in facetime one message appears in the screen whick saying you couldn't log into facetime.....what i suppose to do?? :/please help me :/
Try:
The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems -
Problem with installing Photoshop elements 9 and adobe support advisor
Hi, I've received a graphic tablet with 2 programs: the first has been downloaded and works perfectly while the second, PSE9, has been giving me problems for at least a week!
I downloaded it and now I have a winzip file full of strange things (one of this is set up exe which tells me that I have to install adobe support advisor) and two files which said 3DF.tmp and PSEP9(1).zip.download and if I try to click them they tell me that I have to find on the Net the program to open them because I can't. And I don't know which program is required.
I tried a lot of times to download the adobe support advisor, I have enough space on my disc and my farewall is deactivated, but when the program begins I saw this annoyant message
cpsid_82829s5 Missing installation file bootstrapper error occured
with this code for a support from adobe 00-67325-032018052012
I unistalled it and retried, but nothing.
Please, I just want to use my tablet with the programs which are comprised in the package, why it's so difficult to download this damn photoshop elements 9????????????
Thank youIn the error message it doesn't tell me
"Installer has detected that a machine restart is pending. It is recommended that you quit the installer, restart try again,"
neither "Installer failed to initialize. File not found. Please download Adobe Support Advisor to detect the problem."
and I have enough space and I have Windows xp then I should be able to install it. I tried to unistall and install again the support advisor but nothing. I'm desperate.
Messaggio originale----
Da: [email protected]
Data: 18/05/2012 22.20
A: "Questionlady"<[email protected]>
Ogg: Problem with installing Photoshop elements 9 and adobe support advisor
Re: Problem with installing Photoshop elements 9 and adobe support advisor created by Jeff A Wright in Trial Download & Install FAQ - View the full discussion
Did you try the steps listed in http://helpx.adobe.com/creative-suite/kb/troubleshoot-error-messages-b ootstrapper-cs5.html which was identified by the Adobe Support Advisor? If so can you please list each step and the result of those steps. This will allow us to best advise you on your next steps.
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4420419#4420419
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4420419#4420419. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Trial Download & Install FAQ by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746. -
Logging with whereabouts using open source and freeware
You can find the html version of this at:
http://www.acelet.com/whitepaper/loggingWithWhereabouts.html
Logging with whereabouts using open source and freeware
The purpose of logging is to find out what had happened when needed. When the
time comes to read log messages, you want to know both the log message and its
whereabouts (class name, method name, file name and line number). So you need
to hard code whereabouts.
But hard coded whereabouts are very difficult to maintain: when you modify your
source code, line number changes; when you copy and paste a line, its class name
and method name change. If whereabouts are wrong, you introduce bugs in your logging
logic and the log messages are useless at the best.
This article shows you an example of using freeware Redress tool to rectify whereabouts
programmatically in your Makefile or Ant build file. So your whereabouts are always
correct for both Java and JSP source file.
Redress tool is part of SuperLogging at http://www.ACElet.com. SuperLogging also
provides an open source wrapper Alog.java, which redirects log method calls to
your favorite logging package. Redress tool can rectify whereabouts information
on all Alog's method calls in your application. So, if you call Alog's log methods,
these calls will be rectified by Redress.
JDK 1.4 introduces a new utility package java.util.logging. The example in this
article is based on JDK logging. Log4J is a cousin of JDK logging. Log4J users
should have no difficulties to modify this example for Log4J. Both JDK logging
and Log4J are excellent logging software for single JVM.
Note: Redress tool rectifies method calls on Alog, not JDK logging. You need to
call Alog instead of JDK logging in your application.
Source code of Alog.java
The following is the source code of Alog's JDK logging version. It serves as an
library file and should be on your CLASSPATH:
* Copyright Acelet Corp. 2000. All rights reserved
* License agreement begins >>>>>>>>>> <br>
* This program (com.acelet.opensource.logging.Alog) ("Software") is an
* open source software. <p>
* LICENSE GRANT. The Software is owned by Acelet Corporation ("Acelet").
* The Software is licensed to you ("Licensee"). You are granted a
* non-exclusive right to use, modify, distribute the Software for either
* commercial or non-commercial use for free, as long as: <br>
* 1. this copyright paragraph remains with this file. <br>
* 2. this source code (this file) must be included with distributed
* binary code.<br>
* NO WARRANTY. This comes with absolutely no warranty. <p>
* <<<<<<<<<< License agreement ends <p><p>
* The purpose of releasing this open source program is to prevent vendor
* lock in. <p>
* You can code your program using this class to indirectly use Acelet
* SuperLogging (com.acelet.logging). If later you want to swith to other
* logging package, you do not need to modify your program. All you have
* to do is: <p>
* 1. modify this file to redirect to other logging packages. <br>
* 2. replace existing com.acelet.opensource.Alog with your modified one. <br>
* 3. you may have to reboot your EJB server to make the changes effect.<br>
* <p>
* This program is just a wrapper. For detail information about the methods
* see documents of underline package, such as com.acelet.logging.Logging.
* <p>
* Visit http://www.ACElet.com for more information.
* <p>
* This file is a modified for using JDK logging as an EXAMPLE.
* <br>
* You can use Redress tool to keep your whereabouts information
* always correct. See http://www.ACElet.com/freeware for detail.
* <p>
* Please see http://www/ACElet.com/opensource if you want to see the
* original version.
package com.acelet.opensource.logging;
import java.util.logging.*;
public final class Alog {
* Log level value: something will prevent normal program execution.
public static int SEVERE = 1000;
* Log level value: something has potential problems.
public static int WARNING = 900;
* Log level value: for significant messages.
public static int INFO = 800;
* Log level value: for config information in debugging.
public static int CONFIG = 700;
* Log level value: for information such as recoverable failures.
public static int FINE = 500;
* Log level value: for information about entering or returning a
* method, or throwing an exception.
public static int FINER = 400;
* Log level value: for detail tracing information.
public static int FINEST = 300;
static Logger logger;
static {
logger = Logger.getLogger("");
public Alog() {
public static void alert(String subject, String message) {
public static void error(String text, int level, String fullClassName,
String methodName, String baseFileName, int lineNumber) {
String[] para = {lineNumber + "", baseFileName};
logger.logp(getLevel(level), fullClassName, methodName, text, para);
public static Level getLevel(int levelValue) {
if (levelValue == SEVERE)
return Level.SEVERE;
else if (levelValue == WARNING)
return Level.WARNING;
else if (levelValue == INFO)
return Level.INFO;
else if (levelValue == CONFIG)
return Level.CONFIG;
else if (levelValue == FINE)
return Level.FINE;
else if (levelValue == FINER)
return Level.FINER;
else if (levelValue == FINEST)
return Level.FINEST;
else
return Level.ALL;
public static void log(String text, int level, String fullClassName,
String methodName, String baseFileName, int lineNumber) {
String[] para = {lineNumber + "", baseFileName};
logger.logp(getLevel(level), fullClassName, methodName, text, para);
public static void sendMail(String to, String from, String subject,
String text) throws Exception {
public static void sendMail(String to, String cc, String bcc, String from,
String subject, String text) throws Exception {
Test program
The simple test program is Test.java:
import com.acelet.opensource.logging.Alog;
public class Test {
public static void main(String argv[]){
Alog.log("Holle world", Alog.SEVERE, "wrongClassName", "wrongMethod",
"wrongFileName", -1);
How to run the test program
1. Compile Alog.java (JDK 1.4 or later, not before):
javac Alog.java
2. Download freeware Redress tool from http://ACElet.com/freeware.
3. Run Redress tool:
java -cp redress.jar Test.java
4. Check Test.java. The Alog.log method call should be rectified.
5. Run test program:
java Test
You should see log message with correct class name and method name.Hi;
I found this code and would like to share it with you :
JCoDestination destination = JCoDestinationManager
.getDestination(DESTINATION_NAME2);
JCoFunction function = destination.getRepository().getFunction(
"RFC_FUNCTION_SEARCH");
if (function == null)
throw new RuntimeException("RFC_FUNCTION_SEARCH not found in SAP.");
function.getImportParameterList().setValue("FUNCNAME", "*");
function.getImportParameterList().setValue("GROUPNAME", "*");
try {
function.execute(destination);
JCoTable funcDetailsTable = function.getTableParameterList()
.getTable("FUNCTIONS");
int totalNoFunc = funcDetailsTable.getNumRows();
if (totalNoFunc > 0) {
for (int i = 0; i < totalNoFunc; i++) {
System.out.println("Function Name: "
+ funcDetailsTable.getValue(i));
} catch (AbapException e) {
System.out.println(e.toString());
return;
System.out.println("RFC_FUNCTION_SEARCH finished");
It is working and retrieving FM.
Regards
Anis -
[svn:fx-trunk] 8452: - Fix flicker problem with constraint bound text that is being autoSized.
Revision: 8452
Author: [email protected]
Date: 2009-07-08 08:38:32 -0700 (Wed, 08 Jul 2009)
Log Message:
- Fix flicker problem with constraint bound text that is being autoSized. If the remeasure is done in a 2nd pass you will see a flicker as all the objects are moved to accommodate the reflowed text.
- Fix data binding issue with text setter.
- Rework measure() to accommodate implicit autoSize.
If explicitWidth or widthInChars specified and explicitHeight or heightInLines specified, or for now, blockProgression != "tb", the text has fixed dimensions and is not auto-sized.
If no text and width specified, but no height, start at specified width and one line high and grow taller.
If no text and height specified, start at 1 char wide with the specified height and grow wider.
If neither width nor height specified, and toFit lineBreaks, start at explicitMaxWidth, or default maxWidth of 160, and grow taller.
If neither width nor height specified, and explicit lineBreaks width is unlimited and can grow taller.
These are further constrained by min/max Width and Height except in the case that explicitWidth or explicitHeight are specified.
- Change default maxWidth for RichText and SimpleText to 160 to match RET. Previously it was 10000. This is used for
text with toFit lineBreaks if a width isn't specified.
QA Notes: 12 or so TextGraphic tests fail because of the new default maxWidth.
Doc Notes:SDK-22014, SDK-21837
Reviewers: Gordon
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-22014
http://bugs.adobe.com/jira/browse/SDK-21837
Modified Paths:
flex/sdk/trunk/frameworks/projects/spark/src/spark/primitives/RichEditableText.as
flex/sdk/trunk/frameworks/projects/spark/src/spark/primitives/supportClasses/GraphicEleme nt.as
flex/sdk/trunk/frameworks/projects/spark/src/spark/primitives/supportClasses/RichEditable TextContainerManager.as
flex/sdk/trunk/frameworks/projects/spark/src/spark/primitives/supportClasses/TextGraphicE lement.as
Added Paths:
flex/sdk/trunk/frameworks/projects/spark/src/spark/primitives/supportClasses/RichEditable TextEditManager.asYou have used elements like header, footer, footer1 and nav without using the correct DOCTYPE declaration. Replace the first line of your code with
<!doctype html>
Also have a look here for other problems http://validator.w3.org/check?verbose=1&uri=http%3A%2F%2Fhome.surewest.net%2Fstorytales%2F test%2Fforposting.html
After the above has been fixed, please come back here to fix the remaining problem(s)
Gramps -
Problems with creation of catalogue XPGrpwise and temporary
Problems with creation of catalogue XPGrpwise and temporary files.
I use GroupWise 8.01 and WinXP (SP2), OpenOffice 3.1.
Why at opening files in Library, temporary files are not created in catalogue C:\Documents and Settings\Jon Smith\Local Settings\Temp\XPGrpwise, and created in catalogue C:\Documents and Settings\Jon Smith\My Documents. That causes problems. How to change a situation that worked as it is necessary.
Catalogue XPGrpWise is created and leaves duly in catalogue C:\Documents and Settings\Jon Smith\Local Settings\Temp\.Cvetaev,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/ -
I have one problem with Data Guard. My archive log files are not applied.
I have one problem with Data Guard. My archive log files are not applied. However I have received all archive log files to my physical Standby db
I have created a Physical Standby database on Oracle 10gR2 (Windows XP professional). Primary database is on another computer.
In Enterprise Manager on Primary database it looks ok. I get the following message Data Guard status Normal
But as I wrote above the archive log files are not applied
After I created the Physical Standby database, I have also done:
1. I connected to the Physical Standby database instance.
CONNECT SYS/SYS@luda AS SYSDBA
2. I started the Oracle instance at the Physical Standby database without mounting the database.
STARTUP NOMOUNT PFILE=C:\oracle\product\10.2.0\db_1\database\initluda.ora
3. I mounted the Physical Standby database:
ALTER DATABASE MOUNT STANDBY DATABASE
4. I started redo apply on Physical Standby database
alter database recover managed standby database disconnect from session
5. I switched the log files on Physical Standby database
alter system switch logfile
6. I verified the redo data was received and archived on Physical Standby database
select sequence#, first_time, next_time from v$archived_log order by sequence#
SEQUENCE# FIRST_TIME NEXT_TIME
3 2006-06-27 2006-06-27
4 2006-06-27 2006-06-27
5 2006-06-27 2006-06-27
6 2006-06-27 2006-06-27
7 2006-06-27 2006-06-27
8 2006-06-27 2006-06-27
7. I verified the archived redo log files were applied on Physical Standby database
select sequence#,applied from v$archived_log;
SEQUENCE# APP
4 NO
3 NO
5 NO
6 NO
7 NO
8 NO
8. on Physical Standby database
select * from v$archive_gap;
No rows
9. on Physical Standby database
SELECT MESSAGE FROM V$DATAGUARD_STATUS;
MESSAGE
ARC0: Archival started
ARC1: Archival started
ARC2: Archival started
ARC3: Archival started
ARC4: Archival started
ARC5: Archival started
ARC6: Archival started
ARC7: Archival started
ARC8: Archival started
ARC9: Archival started
ARCa: Archival started
ARCb: Archival started
ARCc: Archival started
ARCd: Archival started
ARCe: Archival started
ARCf: Archival started
ARCg: Archival started
ARCh: Archival started
ARCi: Archival started
ARCj: Archival started
ARCk: Archival started
ARCl: Archival started
ARCm: Archival started
ARCn: Archival started
ARCo: Archival started
ARCp: Archival started
ARCq: Archival started
ARCr: Archival started
ARCs: Archival started
ARCt: Archival started
ARC0: Becoming the 'no FAL' ARCH
ARC0: Becoming the 'no SRL' ARCH
ARC1: Becoming the heartbeat ARCH
Attempt to start background Managed Standby Recovery process
MRP0: Background Managed Standby Recovery process started
Managed Standby Recovery not using Real Time Apply
MRP0: Background Media Recovery terminated with error 1110
MRP0: Background Media Recovery process shutdown
Redo Shipping Client Connected as PUBLIC
-- Connected User is Valid
RFS[1]: Assigned to RFS process 2148
RFS[1]: Identified database type as 'physical standby'
Redo Shipping Client Connected as PUBLIC
-- Connected User is Valid
RFS[2]: Assigned to RFS process 2384
RFS[2]: Identified database type as 'physical standby'
Redo Shipping Client Connected as PUBLIC
-- Connected User is Valid
RFS[3]: Assigned to RFS process 3188
RFS[3]: Identified database type as 'physical standby'
Primary database is in MAXIMUM PERFORMANCE mode
Primary database is in MAXIMUM PERFORMANCE mode
RFS[3]: No standby redo logfiles created
Redo Shipping Client Connected as PUBLIC
-- Connected User is Valid
RFS[4]: Assigned to RFS process 3168
RFS[4]: Identified database type as 'physical standby'
RFS[4]: No standby redo logfiles created
Primary database is in MAXIMUM PERFORMANCE mode
RFS[3]: No standby redo logfiles created
10. on Physical Standby database
SELECT PROCESS, STATUS, THREAD#, SEQUENCE#, BLOCK#, BLOCKS FROM V$MANAGED_STANDBY;
PROCESS STATUS THREAD# SEQUENCE# BLOCK# BLOCKS
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
RFS IDLE 0 0 0 0
RFS IDLE 0 0 0 0
RFS IDLE 1 9 13664 2
RFS IDLE 0 0 0 0
10) on Primary database:
select message from v$dataguard_status;
MESSAGE
ARC0: Archival started
ARC1: Archival started
ARC2: Archival started
ARC3: Archival started
ARC4: Archival started
ARC5: Archival started
ARC6: Archival started
ARC7: Archival started
ARC8: Archival started
ARC9: Archival started
ARCa: Archival started
ARCb: Archival started
ARCc: Archival started
ARCd: Archival started
ARCe: Archival started
ARCf: Archival started
ARCg: Archival started
ARCh: Archival started
ARCi: Archival started
ARCj: Archival started
ARCk: Archival started
ARCl: Archival started
ARCm: Archival started
ARCn: Archival started
ARCo: Archival started
ARCp: Archival started
ARCq: Archival started
ARCr: Archival started
ARCs: Archival started
ARCt: Archival started
ARCm: Becoming the 'no FAL' ARCH
ARCm: Becoming the 'no SRL' ARCH
ARCd: Becoming the heartbeat ARCH
Error 1034 received logging on to the standby
Error 1034 received logging on to the standby
LGWR: Error 1034 creating archivelog file 'luda'
LNS: Failed to archive log 3 thread 1 sequence 7 (1034)
FAL[server, ARCh]: Error 1034 creating remote archivelog file 'luda'
11)on primary db
select name,sequence#,applied from v$archived_log;
NAME SEQUENCE# APP
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00003_0594204176.001 3 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00004_0594204176.001 4 NO
Luda 4 NO
Luda 3 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00005_0594204176.001 5 NO
Luda 5 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00006_0594204176.001 6 NO
Luda 6 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00007_0594204176.001 7 NO
Luda 7 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00008_0594204176.001 8 NO
Luda 8 NO
12) on standby db
select name,sequence#,applied from v$archived_log;
NAME SEQUENCE# APP
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00004_0594204176.001 4 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00003_0594204176.001 3 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00005_0594204176.001 5 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00006_0594204176.001 6 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00007_0594204176.001 7 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00008_0594204176.001 8 NO
13) my init.ora files
On standby db
irina.__db_cache_size=79691776
irina.__java_pool_size=4194304
irina.__large_pool_size=4194304
irina.__shared_pool_size=75497472
irina.__streams_pool_size=0
*.audit_file_dest='C:\oracle\product\10.2.0\admin\luda\adump'
*.background_dump_dest='C:\oracle\product\10.2.0\admin\luda\bdump'
*.compatible='10.2.0.1.0'
*.control_files='C:\oracle\product\10.2.0\oradata\luda\luda.ctl'
*.core_dump_dest='C:\oracle\product\10.2.0\admin\luda\cdump'
*.db_block_size=8192
*.db_domain=''
*.db_file_multiblock_read_count=16
*.db_file_name_convert='luda','irina'
*.db_name='irina'
*.db_unique_name='luda'
*.db_recovery_file_dest='C:\oracle\product\10.2.0\flash_recovery_area'
*.db_recovery_file_dest_size=2147483648
*.dispatchers='(PROTOCOL=TCP) (SERVICE=irinaXDB)'
*.fal_client='luda'
*.fal_server='irina'
*.job_queue_processes=10
*.log_archive_config='DG_CONFIG=(irina,luda)'
*.log_archive_dest_1='LOCATION=C:/oracle/product/10.2.0/oradata/luda/ VALID_FOR=(ALL_LOGFILES, ALL_ROLES) DB_UNIQUE_NAME=luda'
*.log_archive_dest_2='SERVICE=irina LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES, PRIMARY_ROLE) DB_UNIQUE_NAME=irina'
*.log_archive_dest_state_1='ENABLE'
*.log_archive_dest_state_2='ENABLE'
*.log_archive_max_processes=30
*.log_file_name_convert='C:/oracle/product/10.2.0/oradata/irina/','C:/oracle/product/10.2.0/oradata/luda/'
*.open_cursors=300
*.pga_aggregate_target=16777216
*.processes=150
*.remote_login_passwordfile='EXCLUSIVE'
*.sga_target=167772160
*.standby_file_management='AUTO'
*.undo_management='AUTO'
*.undo_tablespace='UNDOTBS1'
*.user_dump_dest='C:\oracle\product\10.2.0\admin\luda\udump'
On primary db
irina.__db_cache_size=79691776
irina.__java_pool_size=4194304
irina.__large_pool_size=4194304
irina.__shared_pool_size=75497472
irina.__streams_pool_size=0
*.audit_file_dest='C:\oracle\product\10.2.0/admin/irina/adump'
*.background_dump_dest='C:\oracle\product\10.2.0/admin/irina/bdump'
*.compatible='10.2.0.1.0'
*.control_files='C:\oracle\product\10.2.0\oradata\irina\control01.ctl','C:\oracle\product\10.2.0\oradata\irina\control02.ctl','C:\oracle\product\10.2.0\oradata\irina\control03.ctl'
*.core_dump_dest='C:\oracle\product\10.2.0/admin/irina/cdump'
*.db_block_size=8192
*.db_domain=''
*.db_file_multiblock_read_count=16
*.db_file_name_convert='luda','irina'
*.db_name='irina'
*.db_recovery_file_dest='C:\oracle\product\10.2.0/flash_recovery_area'
*.db_recovery_file_dest_size=2147483648
*.dispatchers='(PROTOCOL=TCP) (SERVICE=irinaXDB)'
*.fal_client='irina'
*.fal_server='luda'
*.job_queue_processes=10
*.log_archive_config='DG_CONFIG=(irina,luda)'
*.log_archive_dest_1='LOCATION=C:/oracle/product/10.2.0/oradata/irina/ VALID_FOR=(ALL_LOGFILES, ALL_ROLES) DB_UNIQUE_NAME=irina'
*.log_archive_dest_2='SERVICE=luda LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES, PRIMARY_ROLE) DB_UNIQUE_NAME=luda'
*.log_archive_dest_state_1='ENABLE'
*.log_archive_dest_state_2='ENABLE'
*.log_archive_max_processes=30
*.log_file_name_convert='C:/oracle/product/10.2.0/oradata/luda/','C:/oracle/product/10.2.0/oradata/irina/'
*.open_cursors=300
*.pga_aggregate_target=16777216
*.processes=150
*.remote_login_passwordfile='EXCLUSIVE'
*.sga_target=167772160
*.standby_file_management='AUTO'
*.undo_management='AUTO'
*.undo_tablespace='UNDOTBS1'
*.user_dump_dest='C:\oracle\product\10.2.0/admin/irina/udump'
Please help me!!!!Hi,
After several tries my redo logs are applied now. I think in my case it had to do with the tnsnames.ora. At this moment I have both database in both tnsnames.ora files using the SID and not the SERVICE_NAME.
Now I want to use DGMGRL. Adding a configuration and a stand-by database is working fine, but when I try to enable the configuration DGMGRL gives no feedback and it looks like it is hanging. The log, although says that it succeeded.
In another session 'show configuration' results in the following, confirming that the enable succeeded.
DGMGRL> show configuration
Configuration
Name: avhtest
Enabled: YES
Protection Mode: MaxPerformance
Fast-Start Failover: DISABLED
Databases:
avhtest - Primary database
avhtestls53 - Physical standby database
Current status for "avhtest":
Warning: ORA-16610: command 'ENABLE CONFIGURATION' in progress
It there anybody that experienced the same problem and/or knows the solution to this?
With kind regards,
Martin Schaap -
Problem with QT 7.1.5 and Sorensen codec?
Has anyone noticed a compatibility problem with Sorensen video 3 codec and Quicktime 7.1.5? This problem did not seem to exist in prior versions (hence have been asking how to reinstall previous version but seems impossible). Some of the earlier postings discuss software that may be designed with Sorensen codec... these may be the ones not functioning properly now (video no longer works). Does this sounds plausible?
Mac Mac OS X (10.4.8)
Mac Mac OS X (10.4.8)
Mac Mac OS X (10.4.8)That may be true, Jack, but Edmund said that the movie played in QuickTime Player. So his problem is most likely not a bug in QuickTime, though I can't say for certain.
And as I said above, I have no problem playing Sorenson-encoded content on my Intel-based Mac with QuickTime 7.1.5, so more details about your content and setup (including any third-party codecs you may have installed) so that people can determine what the difference might be between the content that plays and the content that does not, or what's different in the systems, would be helpful, I'm sure. -
Problem with use of COM+ Transaction and DB Transaction
Problem with use of COM+ Transaction and DB Transaction
We build a Web site that use sometime COM+ Transaction and sometime DB
Transaction. If we use a COM+ Transaction and a few seconds later we try to use
a Database Transaction (OracleConnection.BeginTransaction), we get the error
Connection is already part of a local or a distributed transaction
Of course the error does not produce everytime; it takes some try before we get
the problem. And of course, if i use pooling=false on the connection string,
the problem does not appear.
i run the Web page
and push the COM+ Transaction and DB Transaction one after the other for some
times and the problem should appear.
Environment: Windows server 2003, .Net Framework 1.1, ODP.Net 9.2.0.401,
Database Server 9.2.0.4> Why in form builder can't I...
Is this happening at runtime or at buildtime? You'll need to provide more info on what you are actually doing that's causing the problem.
Regards,
Robin Zimmermann
Forms Product Management -
Problem with Xsan 2.1.1 and Mac Os server 10.5.6
Hi,
We have a big problem with xsan 2.1.1 and Mac Os server 10.5.6.
- We have one server, is a Open Directory Master, and also is a metadata controller of xsan2. The Volumes of xsan2 are shares via afp, and the clients (moreless 50) connect with server via afp.
- We have some problems, one of them is:
odm fsm [341]: XSAN FSS 'VolDocs [0] ' : Invalid inode lookup: 0x7f80000000007e0 markers 0x0/0x0 nextiel 0x0
This message is always in the log. We stop the volume, and start cvfsck -wv, but dont have anything, how fix it??
- Another problem is with AFP service, suddenly the service stop, and the error is :
mds [58] (error) Server: Mach error queueing checkin to peer manager: (ipc /send) invalid port right.
-What of the meaning of (ipc/send) invalid port right??.
And the last error is:
-com.appelAppleFileServer [347] MDSChannelPeerRequest: (ipc/rcv) timed out.
Need Help please!.My configuration:
- Master Directory:
Hardware Configuration:
Model: Xserve
Processor: 2x2,8 Ghz Quad-Core Intel Xeon
Memory 8 Gb
Disk: 70,04 Tb
Software:
Kernel Version: 9.6.0
System Version: Mac OS X Server 10.5.6
Xsan 2.1.1
Services: AFP, DNS, Open Directory RADIUS
Status: connected Users: 37
This server is the open directory Master and metadata controller of xsan2, but we have another server that is open directory replica and metadata controller of xsan2. The fisrt server have too many errors with afp, the service stop and the server is dead, and you must restart via terminal with the command sudo reboot. I dont know what happen, do you help me please? -
If you have problems with your ipod turning off and charging look at this..
I have to send in my 80gb ipod video because I am having problems with the battery,I charge it until it says charged and in ten min it shuts off and when I try to turn it on it says that there is not enough battery life to even turn on so i called it in and they told me that I have short battery life and that I have to send it in and they will fix it...If anybody out there has the same problem call it in and they will replace it...and if you don't have the number here it is:1-800-275-2273
hey man I'm glad they replaced it...but if you look
most of the problems are with the battery or the hard
drive...I know that people make mistakes and I do not
expect it to be perfect,but some people expect for it
to be working perfect...and those people tell other
people that there product was defective,and that's
how Apple loose customers..I didn't say I was Mad...I
don't know why your getting mad, I'm sorry if I
offended you, I was just trying to give Apple advice
sorry.
Not true, most problems are with software, then with the earphone jack I quote from a letter that I recieved from a service manager that I worked with several years ago who wrote me two weeks ago and I am quoting. "Although the percentage is small it seems that if I had to put it into words I would say that software glitches seem to be the number one problem with the earphone jack a close second. Although both are not a major percentage. All in all it is a great product." Not mad,and sure that Apple will be far better off with your advice. Maybe they will move up from the number one maker of the number one mp3 player in the world and make some serious money with it now that they have it. But be advised that they do not monitor this for advice. You might want to try here http://www.apple.com/feedback/ipod.html
and I will run out and buy more stock.
Maybe you are looking for
-
Can you open a calculator and add or subtract within a cell?
I am trying to see if there is a way to use the number pad as a calculator and add figures then enter into a cell for further use. I want to eliminate the use of my adding machine if possible and just use my keyboard to do my additions and enter dir
-
Synchronous JDBC Receiver Adapter
Hi, My requirement is JDBC--- XI --- JDBC (Sync) JDBC. Let me be more precise about the above scenario. JDBC sender picks up a record from DB1 and sends to DB2 and gets a response from DB2 and send the response to DB3. I am sure this can be handled
-
No thumbnails on PSB files !!!!!!!
After upgraded my version in Photoshop CC, recording PSB files no longer appear as thumbnails on the finder well as in bridge. This bug has been reported to Adobe by many users and Adobe blames Apple : http://forums.adobe.com/thread/1240592?start=80&
-
Panther to Tiger DVD won't restart on external DVD drive, G4 tower!
I purchased the DVD Tiger upgrade last year! My tower does not have a dvd drive so I finally purchased an external LG Super drive to upgrade my system from 10.3 to Tiger. It plugs in into a USB Port with an additional USB port when you need extra pow
-
DASYLab data output stopping after 10 points
Let me preface everything by saying I'm a novice at this. Now that that's out of the way... I am having an issue getting more than 10 data points to record into an output file. I'm sure it's some setting conflict but I'm having no luck figuring it ou