One sales order with reference to 2 sales orders

Hi Gurus,
can v create one sales order with reference to 2 sales orders?
i think it is not possible, but if there is any chance let me know?
Cheers,
Sumith

First u need to ensure whether copy controls are maintained between the documents (say Ex ZOR ---> ZOR) here i am assuming that ur source and target document are of same type)
Maintain the controls.
Then u need to create the source documents  and save.
Then, u need to create the target document by using the create with reference button, enter the first reference order no and proceed further. ater entering into the order, again u need to press the create with reference button for the second time to enter the second reference order.
Now both the order items will come to a single order. now u can proceed further
Hope it is useful...
reward points if u found useful..

Similar Messages

  • Create a Sales order with reference to another sales order  using BAPI

    Dear All,
    Can any one tell me what are all the parameters required to create a Sales order with reference to another sales order using BAPI_SALESORDER_CREATEFROMDAT2....
    Thanks in advance

    Hi Madhan
    Thanks a lot for your reply.
    However, I would like to know which parameters need to passed in this BAPI in case of SO creation with reference. I beleive there are only a few parameters that need to passed in ORDER_HEADER_IN, ORDER_ITEMS_IN, etc.
    Need to know exactly which are these parameters.
    Regards
    Mihir Shah.

  • BAPI to create sales order with reference to another sales order

    hi all,
    is there a bapi that allows you to create a sales order with reference to another sales order?
    thanks,
    V

    Hi Valencia,
    I think the normal BAPI (BAPI_SALESORDER_CREATEFROMDAT1)will do. You will have to fill the fields REF_DOC, REF_DOC_IT, REF_DOC_CA of the table ORDER_ITEMS_IN (and make sure that Customizing settings allow you to copy from order to order).
    Regards,
    John.

  • FM to create Sales order with reference to another Sales order

    Hi,
    Is there any inbound IDOC FM which can create a Sales Order with reference to another Sales order.
    PLease reply
    Santhana M.

    Hi,
    try FM BAPI_SALESORDER_CREATEFROMDAT2
    with ORDER_HEADER_IN fields
    REFOBJTYPE
    REFOBJKEY
    REFDOCTYPE
    Regards,
    Clemens

  • How can I create a sales order with reference to a purchase order?

    How can I create a sales order with reference to a purchase order?
    Thanks in advance...

    Hello,
    you can't create a sales order with reference to a purchase order. You can input customer PO nuber in the sales order Purchase Order number filed.
    Prase.

  • Creating new sale order with reference of old sale order.

    Dear gurus
    i have requirement
    i want to make a sale order with reference of old sale order.
    how to achieve it?
    Regards
    Saad Nisar

    Hi,
    In vtaa
    give source and document number and assign all the relevant routines.
    Now on the left hand side, click the Item button and then give the source I.C as TAC and target also as TAC adn then fill the routines.
    Do the same for Schedule line (which is related to TAC)
    If this is done, then ur scenario will work

  • Creating ERP Sales order with reference to CRM Service Order

    Hello all,
    I am trying to create an ERP Sales Order from CRM. If Icreate the Sales Order manually, it is working correctly but, if I try to create the ERP Sales Order as follow-up document for the CRM Service Order, it is not working.
    I have defined the Cross-system Copying of Transaction Types, byt the ERP sales order is not shown as possible follow.up doc from the CRM Service Order. Does anyone know if it is possible?
    Additionally, I would need to create CRM Sales Orders in reference to ERP Sales Order. Is there any way to do it??
    Thanks in advance and Regards,

    Hi Oliver,
    Rajendra answer is correct.
    The SAP Standard integration Scenario creates a ERP sales order for all the salesitems in the serviceorder.
    Without items no salesorder is created in standard.
    Maybe you could realize your requirement with own coding when you save a new service order or by button - click.
    I realized something similar some weeks ago. One hind:  It is helpfull to maintain a ztable where you store which CRM serviceorder is linked to which sales orders.
    Kind regards.
    Manfred

  • Create a Revenue Order with Reference to a Sales Order

    Hi Gurus,
      I have specific requirement of creating a Revenue Order ( ZCAR ) with Reference to a Sales Order. The Issue is when I create a Revenue Order from Sales Order by using the BAPI to Copy the data from Original Sales Order it will create copy the data which is there in Original Sales order. My Requirement is when I create the Revenue Order I should have Credit Line which is same as the Order Line from Orignal Sales order and also I need to have a debit line ( which will be a copy of Credit Line ) only difference is Item Categories will be different .
    Please tell me how can I add the debit line in this Scenario and which BAPI's should I use to do this.
    Thanks,
    Raj

    What is the IO you have assigned in the Sales Order please?
    Just check the Sales Order - Account assignement, so that you can able to change if there is a different IO.
    System won't pick up IO automayically until unless you secify in Sales order to done OKB9 settings.
    Chek the above
    Thanks

  • Sales order with reference to another Sales order

    Hi SAP Gurus,
    Good day.
    I would like to seek an advice from u regarding this scenario:
    First if all, is this scenario possible-create sales order w/ reference to another sales order?
    We have a scenario wherein the original sales order has a material w/ free goods. And then when we create another sales order w/ ref to that iriginal sales order, the free goods appeared twice.
    Original SO:
    Item.  Material.    Qty.  item cat
    10.      123.          5.       ZOR
    20.       123.         1.       ZORR
    SO w/ ref to above orig SO:
    Item.  Material.    Qty.  item cat
    10.      123.          5.       ZOR
    20.       123.         1.       ZORR
    30.        123.         1.      TANN
    Item 30 should not appear since our goal is to copy exactly what was on the original sales order.
    I have checked the item cat and copy control & seems it is correct.
    Please advice
    Thanks,
    Erza

    dear friend,
    your 'key' transaction is VTAA
    the copy control has two parts - header and item levels - check them both
    1.
    find out your record (source to target) , goto Deatails and check out two checkboxes - "Copy item number" and "Complete reference" . also check out the copying requirements - look at routine number and make sure it is correct
    2. at item level check out all relevant 'copying' fields
    good luck

  • ME21N Create Purchase Order with reference to previous Purchase Order

    Hello Expert,
    Previously have been using Purchase Info Records for reference when creating Purchase Orders using ME21N.  We then have deleted the Pricing Condition in the Purchase Info Record using ME12.  Now when we are trying to create a new Purchase Order with the same values (Vendor, Material, Plant and Storage Location), the transaction code ME21N automatically fetches the previous values of the Pricing Condition as if it was cached.  I remember of studying this in the MM academy but I am not sure how to disable it. 
    This error only happens when we are creating the first Purchase Order after the deletion, for the second Purchase Order, error will be prompted to the user saying that the Pricing Condition could not be found. 
    I would like to ask where in configuration can I delete this cache behaviour or is that any work around for this. 
    Thanks in advance.

    Hello Antony,
    I found the "Update Prices" function in the Conditions Tab of the Item Details helps to refresh the data and fetch the new information from the Purchase Info Record.  I would like to ask is there anyway to provoke this function automatically everytime when a user runs the transaction ME21N.
    Thanks in advance again.

  • Collective Planned orders Scheduling for lower level orders with reference to the Superior order

    Hi All,
    Collective planned order scheduling.
    I have been trying to reschedule the superior planned order and i was expecting the lower level planned orders to reschedule based on the superior planned order.
    My problem is
    when i try to reschedule the superior planned order the system is not rescheduling the lower level planned orders.
    For example if i change the basic finish date of superior planned order as 30/09/2014 and reschedule the planned order it is only scheduling the header planned order and the lower level planned order is not scheduling.
    Could some one tell me why this is not happenning at planned order level.
    As the rescheduling of collective order will work at production order level but for some reason it is not happening at planned order level(as there is no option available to do so).
    Please give your thoughts on this asap.
    Mahee.

    Hello Mahee
    Please observe that your system is working as designed. Planned orders are scheduled independently, even when they are part of a network/collective order. Note 152319 explains the planned order scheduling in detail and it provides the following information:
    * No scheduling of overall networks is executed although a directly manufactured component is assigned.
    Note that no scheduling of the overall network is executed for planned orders. For the components requirements dates are determined. In order to cover them, planned orders are created in the next MRP run. Since the requirements are not managed using the exact time, the results of the planned order scheduling and of a scheduling of the overall network of the converted collective order can differ.
    BR
    Caetano

  • Re-work order with reference to previos production order

    hi guys,
    how can i set-up my re-work order to be referenced to its previous production order?

    Create production order with co07, in the settlement rule specify category as ORD, in settlement receiver give your parent production order & specify 100% settlement.
    If helpful award points
    Regards,
    Vivek

  • Create a sales order with reference to a sales doc of different sales area

    Hi All,
    I would like to create a sales order by copying a sales order of different sales area. Is there way to achieve this (user exit, custom transaction, copy control) if the standard SAP doesn't allow?
    Thanks in advance
    Venkat

    HI venkat,
                   to be  very precise yes ,it is possible to create a sales order referencing the sales order of the same customer from different sales area ,but system has to understand the key field which is differentiated between those two sales areas like say doc type or any other header fields so that ,we can use that field in userexit MV45AFZZ to code a logic ,so that system picks up right sales area depending on your business process.
    mukund

  • Production order with reference to sales order

    Hi experts,
    I have created one sales order.
    I am getting an error as "sales order has no CO object" while creating production order with reference to that sales order. Can anyone help me on this ?
    Thanks in advance.
    Rgds,
    Parul.

    Dear singh,
    pls check this given by yadav
    T. Code: OKKP - Maintaining Controlloing Area
    Select your Controlling Area and Click: Activate components/control indicators (left-hand Dialog Structure)
    Here, Under Tab: Activate, check Boxes: Sales Order, Cost Objects, etc..
    Check whether Strategy Group is maintained in Material Master (MM02) --> View: MRP3.
    T. Code: VA02/ VA03 --> Tab: Procurement -> Column: RqTy
    There, Check whether requirement type is relevant for MTO.
    More information:
    Req. type: KE (if, Reqmts class: 040 Mke-to-ord.w/o cons. - possible to create Production order)
    Req. type: KEK (If, Reqmts class: 020)
    Req. type: KSV (used for Make to stock - Planning with Assembly Planning Strategy 40 is being used in the MRP3 view of the material)
    Also, Check other relevant settings in:
    SPRO --> IMG --> Sales & Distribution --> Basic Functions --> Availability Check and Transfer of Requirements --> Transfer of Requirements
    Best Regards,
    vraj

  • Problem with BOM Quant while creating Sales order with reference using BAPI

    Dear All,
    I am facing problem with creating a slaes order with reference to other sales order by using BAPI_SALESORDER_CREATEFROMDAT2 .
    Sales order is getting created but
    1. It exploding the BOM means the line items which are not there in the reference SO also coming in the new SO ( all BOM items are coming )
    2. Schedule line for BOM header item is getting copied to all sub items of BOM.
    Can any one help me out to prevent the above deviations in creating Sales order with reference by using BAPI_SALESORDER_CREATEFROMDAT2.
    Note: while passing the parameters to BAPI_SALESORDER_CREATEFROMDAT2
    all the data related to items is exactly the same as in the original Sales Order.
    Thanks in advnace.
    Regards,
    John

    Hi All,
    Can any one help me !!!!!!!!!!
    please

Maybe you are looking for

  • Looping Restart in Early Intel iMac after recent 10.5 update

    My friend's iMac is stuck in a restart loop after downloading the latest update for her 10.5 system. She hadn't installed an update for about 4 months so I am not sure what update would have caused the loop. Her computer was working fine before the u

  • Bridge CS4 Web Galleries - Adding New Web Gallery Presets

    Hi. How can i import new web gallery presets into Bridge CS4, for example from lightroomgalleries co? Im on a French Win XP and Photoshop CS4. I know i have to create a folder within Common Files/Adobe/Bridge CS4 Extensions/Adobe output Module/mediag

  • Spry tabbed panels java script error screwing up whole page when I reopen document in dreamweaver

    I need help! I am creating a site in dreamweaver and I am using spry tabbed panels for my content on every page.  I've created 4 pages.  When I go to reopen the pages after quitting dreamweaver 2 open and work just fine.  However, for the other two I

  • What is the system doing when I empty a large file from the trash?

    I am in the process of deleting my old iPhoto library. When I installed OS X 10.10.3 it created a new Photos Library.photoslibrary and left the old iPhotos library as an archive. The old library is 249 gigabytes. I don't have "Empty Trash securely" o

  • Cross Tab In Discoverer

    Hi Guys, I need to build a discoverer report that should display the data for every month. I had written one query where Transaction_Date in Mon-YYYY form is made a data point in discoverer which means my sheet will segregate the data in cross for ea