One Sender system (sync) and two receivers system(Sync) . Pls help

Hello All,
For one Sender system (sync) and two receivers system(Sync)
as I am using BPM for it.
CRM sender system (RFC)
DM (RFC) and ERP Receiver systems (RFC)
Pls let me know
In Receive there is only two mode
1. Async
2. Open S/A bridge
So do i need to choose Async mode for sender RFC.
Pls tell me the BPM flow steps for my scenario
Regards

Use Open S/A bridge
The scenario could be done wihtout bpm. Ur requirement is not clear but here could be the steps. Steps.
Receive
Sync send
Sync send
Async send
Regards,
Prateek

Similar Messages

One Sender system and two receivers system scenario. Pls help

Hello,
I have One Sender system and two receivers system scenario.
My sender is RFC (sync) in nature.
My one receiver is RFC (sync) in nature.
My second receiver is RFC (sync) in nature.
Pls tell me and send me links/docs for this scenario.
Regards

Hi Rick,
For two receivers you require 2 interface determination, receivers determinations etc.
Go through these threads for one sender and multiple receivers:
one sender and two receiver
/people/shabarish.vijayakumar/blog/2005/08/03/xpath-to-show-the-path-multiple-receivers
Then configure your RFC communication channel in XI system + activate it and after that using all same parameters make an TCP/IP RFC destinatioon on R3 side.
Rewrads if found helpful.
BR,
Alok

I have One Sender system and two receivers system scenario. Pls help

Hello,
I have One Sender system and two receivers system scenario.
My sender is RFC (sync) in nature.
My one receiver is RFC (sync) in nature.
My second receiver is RFC (sync) in nature.
How to proceed with this.
If my second receiver is async then how to proceed with this.
Regards

Hi Rick !
Depending on your requierements, you can create a BPM that
1) receives request from sender
2) sends request to receiver 1 / receives response from receiver 1
3) sends request to receiver 2 / receives response from receiver 2
4) do some processing with both responses
5) sends response to sender.
If your second receiver is async, just use an async send step in step 3. As far as I know, you cannot use multimapping with sync scenarios.
Regards,
Matias.
ps: please award points if helpful

One Sender system and two receivers system(Sync) . Pls help

Hello All,
Help required to make one scenario in XI.
Currently there is one interface (XI is not used) that is already in place.
CRM sender system
DM and ERP Receiver systems.
CRM RFC call DM RFC directly and same CRM RFC call ERP RFC directly.
Result (can be error or correct)is returned back to CRM RFC from DM and ERP RFC's.
Now I want to make this scenario in XI.
If I make without BPM I get message 'Multiple receivers are not allowed for Sync systems in Receiver Determination.
Pls advice how to make this scenario with Error an Exception Handling.
Regard

Rick,
this makes no sense - there must be some differentiation. It woudn't be necessary only if there was one function, which first calls DM and then calls ERP and both calls would be done INSIDE this one function.
I meant, that you have only one function, which calls both systems - I mean - the same interface would call the system... Do you know what I mean?
Whatever..
I have a better solution for you. Do you know what ABAP proxies are? Let's do it this way and it will be the easiest and most reliable way.
Create 2 interfacec - one will call DM and one ERP. Develop 2 separate scenarios. No conditions - Just 2 simple scenarios. On the CRM system go to t-code sproxy. (eeee, hope you have an SAP CRM and have configured settings to be able to develop proxy objects.)
Generate proxies and replace current functions by calling the proxy objects' methods.
This is of course possible only if u have
a, CRM from SAP
b, configured settings XI<->CRM (usually does basis team)
Ok, again one thing: CHECK how your current scenario work - how are the calls made.. I believe, there are 2 different calls in one function, so when the function in CRM is ran, first call is made and then the second. But forget this general function, because it is not the interface. The interfaces are the functions which really try to send and receive data. And they simply CAN'T be the same, otherwise it wouldn't be possible for CRM to know, to which system should be the call made to!!! So, ask you colleagues for THESE TWO calls. If they tell you, no, there is only one call, which is general (which is bullshit, because it simply can't - again, there must be at least some flag or what), then just tell them - ok, this is not possible. I need a flag to be able to differentiate the messages (and this will be the condition in receiver determination) or simply let them to develop for you 2 independent function. ! for call to DM and 1 to call to ERP. You will then create 2 separate scenarios and they will use these 2 functions in their one general or whatever...
ufffff
Peter

How can One sender communication channel pick two file from two location

Hello
I have a requirement that how can One sender communication channel pick two file from two location.Both the file has same name...How to configure the one receiver communication channel.i dont have any IR,no mapping..Please help me...

>
Soumitra Sinha wrote:
> Hello Vijay
> I already done the adapter specific message attribute.i am getting the file name properly.but that is nothing to do with my req.i am again clearing my problem:
> i have two folder folder a,folder b.Both has the same file credit0002. i have two destination folder i have one sender and one receiver channel.I dont have any IR.How one sender channel can pick file from two location and how one receiver channel can put in two location.please help me..
Ok now I get your requirement.
you cant achieve this - how one receiver channel can put in two location if you dont have a dynamic configuration defined i.e Adapter specific attributes.
easy way - involve IR mapping
else
have a adapter module to define your dynamic configuration.
Ref: /people/daniel.graversen/blog/2006/10/05/dynamic-configuration-in-adapter-modules & /people/michal.krawczyk2/blog/2006/10/09/xi-dynamic-configuration-in-adapter-modules--one-step-further
Set the dynamic directory/file name etc for your receiver adapter.

I had to change my user ID because I used my email at my old job and now the old one keeps popping up and I can't sync mu phone or authorize my computer at work to sync my phone. to syn

I had to change my user ID because I used my email at my old job and now the old one keeps popping up and I can't sync my phone or authorize my computer at work to sync my phone. I have a new user ID and PW that allows me into ITUNES but that old one won't go away. Any help? Thanks

Hi, you can't change which ID was used to purchase any app. However, you can edit your Apple ID, which may be a better option than using a new id.

DHCP Reservation Sync and DNS Host record sync etc shown in IPAM GUI

Hello all,
I am aware of the scripts in the TechNet script center to sync DHCP leases etc to IPAM, however my question is about something else -
If you highlight an IP address (IP address inventory->select an IP), You can see fields that say: "DHCP reservation sync", "DNS PTR record sync" and "DNS host record sync" as below:
I was curious as to what these are for. Is there some built-in sync functionality for these that I perhaps have not enabled? (Don't see such options any where..)
thanks,
-Ravi

Hi Ravi ,
The three columns tell us the information of the synchronization between IPAM server and DNS server (or DHCP server) .
Here is the detailed guide for using IPAM :
Using the IPAM Client Console :
https://technet.microsoft.com/en-us/library/jj878351.aspx#inventory
IPAM can sync DNS and DHCP records .
The IPAM database is separate from DHCP and DNS servers on our network ,and full synchronization of hosts and IP addresses between IPAM and managed DNS or DHCP servers does not occur automatically
unless we have configured automated tasks to perform this synchronization .
For detailed information ,see
DNS and DHCP record synchronization chapter in the following link :
Multi-server Management :
https://technet.microsoft.com/en-us/library/jj878329.aspx
Best Regards,
Leo
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

HT1212 guys!!!! i forgot my itouch password and now it's totally disabled... what else i can do?? i mean my itouch5 is never been sync to any computer... pls help me to get rid of this passcode!! and do all my data and apps will be gone or will it be ther

guys!!!! i forgot my itouch password and now it's totally disabled... what else i can do?? i mean my itouch5 is never been sync to any computer... pls help me to get rid of this passcode!! and do all my data and apps will be gone or will it be there?? pls

Forgotten Screen-Lock Passcode
Connect the iOS device to your computer and try to make a backup
iOS: How to back up
Then restore via iTunes. The iOS device will be erased. Place the iOS device in Recovery Mode if necessary to allow the restore.
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

Apps showing in library but not showing up in devices i pod- sync apps list. ...pls help

apps showing in library but not showing up in devices i pod- sync apps list. ...pls help
id: [email protected]

Are the apps checked to be synced to the iPod and did you click on the sync button in Tunes?
Were the apps purchased fro the same accoubnt signed into in the iPod?
Are the apps compatible witht he iPOd model and iOS version?
Do you have restrictions set that prohibit instaling apps?

My songs dont download properly when it comes up it shaded in grey and it says error anyone pls help, My songs dont download properly when it comes up it shaded in grey and it says error anyone pls help

My songs dont download properly when it comes up it shaded in grey and it says error anyone pls help, My songs dont download properly when it comes up it shaded in grey and it says error anyone pls help
Im on ipod 6.1.3 non jaillbroken
and i have not bought songs from itunes store

What is the wording of the error message?
When you say download do yo mean:
- directly downloading from iTunes?
- Syncing to computer?

There is no ringtones sound(any sound, i.e. music)on my iphone even though settings is okay.I checked using headphone, ringtone and music is okay..pls help...

There is no ringtones,music sounds on my iphone until i used a headset and its okay...pls help...

Side bar is ok,its in ring mode.I even try connecting the headphone and removing it, as it also happens to others but still its not working. I just upgraded now to 4.3.3 hoping it will solve the problem but still the same. When using headphones all sounds is ok only handset is the problem.pls help guys..tnx...

Query : Send same data to two different systems

Hi,
We are getting data from BI to PI through proxy. And using soap adapter we are sending the data to non sap system.
Now my query is : I want to send the data which came from BI to PI to two non sap (Prod and Quality) systems. How can we do that? Waiting for your help me on this.

Hi,
You have to add 2 receivers in receiver determination (one for quality & one for prod).
After that, create 2 interface determinations separately one for each, also 2 receiver agreement & 2 receiver channels.
-Supriya.

One R/3 system connecting to TWO BW systems

Hi ,
When we connect two bw systems to one R/3 system,
could you please exlain what is the imact to SAP and BW in terms of query performance, batch performance,Develoment ,Quality system,security,BW Support.
Thanks in advance.
Regards,
kranthi

Hi,
Well at first thought, i wouldnt go for the Landscape that you are suggesting. Because of obvious reasons:
1. Performance issues while loading, on reporting.
2. Data sources might work fine for one system and not for the other, then the whole setup is hit badly.
3. Security and management of the 2 systems, will be a big task.
4. Jobs would take a longer time if the Batch processes are not sufficient.

Same logical system name for two productive systems - BW, PI issues

Dear all,
we have a productive system which serves two companies (different company codes). This system is connected both to BW and PI for both companies.
There is a requirement that these two companies must use their own system, so the whole landscape (dev,qa,prd) will be copied to different systems (different server with different system id).
As a result of the above procedure we wll have two different productive systems, as required, but we wll have the same logical system name for the two productive systems, which must be both connect to bw and PI.
However as far as I know:
- we cannot connect systems with same logical system name to BW,PI
- we cannot convert logical system name of the one of the two productive systems as they are productive and so this is not supported.
How can we overcome the problem?
Please advice.

> However as far as I know:
> - we cannot connect systems with same logical system name to BW,PI
> - we cannot convert logical system name of the one of the two productive systems as they are productive and so this is not supported.
Right.
> How can we overcome the problem?
Since you split up systems (or plan to) I highly recommend booking an SLO service (http://service.sap.com/slo). Those people have to the tools and the knowlege to help you. I would not do this on my own.
Markus

I have an older version of flash player in my new computer and I can't uninstall it it is system 32 and I have system 64 I am not much of a computer person and need help I keep getting pop ups saying there is a bad image

I have an older version of flash player that seems to be in my computer_16_0_0_305.exe and it says bad image
I could not uninstall it and put a new one in. I keep getting this pop up 2 and 3 times.

Hi,
The Flash Player installer is a universal installer for both 32 and 64-bit systems. On a 64-bit OS, it installs both versions, on a 32-bit OS, it installs only the 32-bit version. I'm confused by why you think you only have the 32-bit version. Please provide more information, including screenshots (How to post a screenshot in the forum) so that we may further troubleshoot your situation.
Thank you.
Maria

One Sender system (sync) and two receivers system(Sync) . Pls help

Similar Messages

Maybe you are looking for