One simple question

hi,
warm wishes.........
if in comm channel source side name of the directory is for eg: alax and i want that file in reciever side should be alax.newyork. text .. how it is possible to do.
then structures of the sender is having name , city , pincode.
in reciever side also same structure.
but when the reciever will recieve the message then the message should be like this
filename.city.txt.
thanks in advance,
jp.

Hi JP,
>> i want that file in reciever side should be alax.newyork. text .. how it is possible to do.
You can use adapter specific message attibutes in this. plz go thru the following example. you need to use directory attribute instead of file name.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/70c89607-e4d9-2910-7280-f6746e964516
>> when the reciever will recieve the message then the message should be like this
filename.city.txt.
you can use concat function in mapping for this.
[reward if helpful]
regards,
latika

Similar Messages

FI-LC:One simple question about Consolidation

Hi.I'm a new one in FI-LC.Now I'm reading the SAP Library(Release 4.6C, March 2000).There are some word in the article of Consolidation (FI-LC)->Consolidated Entity:
This and the following sections often refer to the Implementation Guide. Unless otherwise specified, the implementation guide for Consolidation is implied and can be invoked in the R/3 Customizing Implementation Guide via Financial Accounting -> Consolidation.
And I try to found the Financial Accounting -> Consolidation in the IMG of sap but fail.Of course I could not found other function under the Financial Accounting -> Consolidation in the IMG,such as "Master data -> Companies".This question let me fell haze.
Could some one tell me the reason or give me some advice?Thank you.

Hi
Andreas is right. FI-LC has been replaced with EC-CS or SEM-BCS depending on the release. Here is some more information:
Note 335969, 458332, 399334. 836726
Also see http://service.sap.com/sem
Best regards, Kyoko

One Simple Question pl Give me ANS

Which is best.
JSP with Beans
or Struts Framework. ?
i cant able to understand.
can u tell me. huu

The struts framework is build on top of JSP and beans. Your question is like asking "Which is better? A Ford Taurus or a V6?". If used correctly, Struts will save you a lot of time and coding. However, I have seen very complex Struts/Tiles implementations that used three times the necessary code and had massive webs of unmaintainable XML configuration files. How useful Struts will be to you depends on your knowledge and experience of it . . . take time to learn it thoroughly before jumping head first into it.

One Simple Question About Flash and XP

Does the latest version of Flash work with IE8 and/or the latest Firefox version, on a Windows XP sp3 Computer?
Thanks for any help.

It is best to follow Adobe's instructions for updating its software, which varies by the product & versions involved. This usually works well but Adobe is one of those companies big enough to play by its own rules, sometimes ignoring Apple's developer guidelines or inventing its own API's instead of using the Apple provided ones that do the same thing, so there is a small chance things won't go as expected even when you follow the instructions to the letter.
If this happens it is best to seek advice on a product by product, version by version basis.

Just one simple question

My father is the primary but I am the one trying to pay for the phone for myself. So I was wondering do i go on his account to buy the phone or my own? Im just trying to make sure of this process

Ok thank you. I was trying to figure out because this will be the first time doing this.

Just one simple question about procedures

I'm trying to speed up my application, and writing procedures for some of the SQL I freqently use. When I write a procedure for a select statement I get an error PLS-00428 - no INTO clause in the select statement. I can do this in other languages - is this not possible in Oracle, or is there some keyword or other that will let a procedure return a result set?

hi there,
no there is no way by which u can use directly the select statement in procedure, u have to use select statement along with into clause.
Regards
Amit
null

One simple question for Apple Configurator

Hi !
I was wondering if possible to adjust setting on a Ipad anytime i wish by wifi.
I always doing my setting for the profile when my ipad is plug (USB) in my mac mini. I wish that i can change the setting for all profile without the need to plug in my computer. Is there a method, please let me know.
Thanks in advance

If you need the functionality of Configurator, but want changes pushed over the internet instead of having to connect using a white wire, you need the Profile Manager service provided by OS X Server. That's what it does.
https://www.apple.com/uk/osx/server/features/#profile-manager
http://www.apple.com/uk/support/osxserver/profilemanager/

Just simple question about java HTTP session mechanism...

I have one simple question regarding the java HTTP Session Mechanism.
1) Is there another alternative for the HTTP Session ? If have, what the alternative?
2) I have been acknowledge that HTTP session is same as cookie system and others say have many different, where is the different..
thanks

1) You can always do your own session handling. But why bother when there is one there for you?
2) The issue with sessions is how to identify the user from the request. Each session gets given a session id. The user has to send that session id with every request they make.
The standard way is to use a session cookie, which only lasts as long as the browser session. The cookie with the JSESSIONID is sent with every request, thus the server can identify which session a user is in from their cookie.
Of course you cannot assume that the browser will support cookies, so you need to encode all URLs with the method response.encodeURL(). That method puts the session id into the URL if the browser does not support cookies, or they have them switched off.

Simple question just about any one can answer I need a quick answer.

Of course there are millions of iPod and iTunes users. and of course many of them want to back up their music, Reformat the same PC and pu the music they bought and legaly on Back onto the same PC.
I can't be the first person in iPod history to re-format.
So do I De-Authorize my PC "Before" or "After" I burn a Back up CD.

Well....You can Use iTunes for Backing up your Music, but I do not favor this mehtod.
It works fine for music files BUT: I prefer more control and completeness over my backup process. It is also very important to note that a large limitation of using iTunes to manage the backup is that the iTunes method does not create or maintain backups of the two meta-data files (iTunes Library.itl & iTunes Music Library.xml) where your Playlists, Ratings, Play Counts, etc. are stored. See: What are the iTunes Library files?
If you are heavily invested in your Library data (Playlists, Play Counts, Ratings, Last Played, Date Added, etc.), it is crucial that you also make and archive multiple backups of your ‘iTunes Library.itl’ file.
If your music is located under one common Folder (e.g.-‘iTunes’), then it is easiest to physically copy that folder and all its sub-folders in one simple process. It can be done quickly, and incrementally – several times a day, when necessary. In the case of any data loss, just re-copy your entire (or partial) music library back to wherever it was, placing it in the main Folder that the previous iTunes expected. Along with the ‘iTunes Library.itl’ metadata file, this completes a full ‘restore’ of your music to the time of your last backup.
Use of a backup software program will greatly help. It will allow you to easily perform incremental backups of only the files that have changed. WinXP has such a facility built-in. I use a free program called FileSync ( http://www.fileware.com ). There are many out there. Some use Zipped files or proprietary formats, others use standard file formats. I like FileSync as it uses normal file formats that can be viewed/managed via any Windows program or utility.
iTunes Files to Backup (anytime you make additions or changes to the Music or Library that you want to retain)
1) All music files in their current folder structure (usually located in and under the ‘iTunes Music’ folder)
2) The Library database file: ‘iTunes Library.itl’ located in the ‘iTunes’ folder
3) The Library XML file: ‘iTunes Music Library.xml’ located in the ‘iTunes’ folder
4) Any XML playlist files you created for Playlist retention
5) The two iTunes.pref files (optional)
-- C:\Documents and Settings\<your username>\Application Data\Apple Computer\iTunes\iTunes.pref
-- C:\Documents and Settings\<your username>\Local Settings\Application Data\Apple Computer Inc\iTunes.pref
6) The XML file of Ratings, Play Counts and Last Played attributes saved from the main Library and created by Otto’s SaveRatings script (also optional, but recommended):
“Download this: http://ottodestruct.com/itunes/SaveRatings.zip . It's a program, just run it like any other program. Run it on the machine where you're copying the info from BEFORE you move the files to the new machine. Click the "Save Ratings" button and it'll create a ratings.xml file. Now when you move the files, move the program and this file as well. Then after you make your new iTunes library, run it again and click the "Restore Ratings" button. Voila, all your information is back in the Library. Well, most of it anyway, it's not perfect. It'll tell you what songs it couldn't figure out though, and there's usually not very many.”
Here's a list of possible ways to copy your music files from your main iTunes computer to another storage medium for backup purposes.
1) Use an External Hard Drive to store the complete iTunes meta-data files and underlying Music Folder structure and songs from your main computer. They are quite cheap now, for their storage volume. This is my preferred main medium.
2) If you have Two Computers:
2a) Connect them through a router
2b) Connect them using a Direct (w/Mac) or Crossover (PC/PC) Ethernet cable (See: http://www.ifelix.co.uk/tech/3001.html)
2c) Connect them via a USB-to-USB Network Bridge. See: here as an example.
Copy the files and folders from one computer to the other. Use the second PC as your backup repository.
3) Burn several DVDs (at 4.7+ GBs each) with the music data files and store them safely. Re-writable ones are good for backup purposes (if your DVD drive can manage these).
4) Burn 6x more on CDs (at 700MB each) than in #3 above and store them safely in more space Re-writable ones are good for backup purposes (if your CD drive can manage these).
5) Use a larger USB Flash drive (1GB – 4+GBs) to store the files only if you have a small amount ripped music or have multiple and/or jumbo USB drives at your disposal that will fit your music library.
6) Use the Second Internal Hard Drive (if available) of your PC -- not optimum, as you really want to physically separate the storage of backups from the originals, but good as a tertiary storage device.
By keeping only one copy of your music (other than on the iPod), you are not truly 'backed-up' and are running a high risk of losing your music. Music files on just the iPod and the computer is not considered having any backup. If you cannot store your complete music files on the computer’s internal HD, then create and maintain at least two external sets (any multiple combinations of ExHDs, DVDs, CDs).
You need at least two full sets of your music, not including what is on the iPod:
-- One full set on the PC within iTunes (on internal HD or ExHD)
-- One full set on an separate external backup medium (CD/DVD/ExHD/other)
-- One (full or partial) set on the iPod
It is a good policy to backup all your important data. It is a very smart policy to back it up on more than one medium.
External hard drives now run less than $100 for 200-250GBs of storage. Very cheap backup insurance, indeed. See This Link

Load Balancing Directory Servers with Access Manager - Simple questions

Hi.
We are in the process of configuring 2 Access Manager instances (servers) accessing the same logical LDAP repository (comprising physically of two Directory Servers working together with Multi-Master Replication configured and tested) For doing this, we are following guide number 819-6258.
The guide uses BigIP load balancer for load balancing the directory servers. However, we intend to use Directory Proxy Server. Since we faced some (unresolved) issues last time that we used DPS, there are some simple questions that I would be very grateful to have answers to:
1. The guide, in section 3.2.10 (To configure Access Manager 1 with the Directory Server load balancer), talks about making changes at 4 places, and replacing the existing entry (hostname and port) with the load balancer's hostname and port (assuming that the load balancer has already been configured). It says that changes need not be made on Access Manager 2 since the LDAPs are in replication, and hence changes will be replicated at all places. However, the guide also states that changes have to be made in two files, namely AMConfig.properties, and the serverconfig.xml file. But these changes will not be reflected on Access Manager 2, since these files are local on each machine.
Question 1. Do changes have to be made in AMConfig.properties and serverconfig.xml files on the other machine hosting Access Manager 2?
Question 2: What is the purpose of putting these values here? Specifically, what is achieved by specifying the Directory server host and port in AMConfig.properties, as well as in serverconfig.xml?
Question 3. In the HTTP console, there is the option of specifying multiple primary LDAP servers, as well as multiple secondary LDAP servers. What is the purpose of these? Are secondary servers attempted when none of the list in the primary list are accessible? Also, if there are multiple entries in the primary server list, are they accessed in a round robin fashion (hereby providing rudimentary load balancing), or are other servers accessed only when the one mentioned first is not reachable etc.?
2. Since I do not have a load balancer setup yet, I tried the following deviation to the above, which, according to me, should have worked. If viewed in the HTTP console, LDAP / Membership / MSISDN and Policy configuration all pointed to the DS on host 1. When I changed all these to point to the directory server on host 2 (and made AMConfig.properties and serverconfig.xml on host 1 point to DS of host 2 as well), things should have worked fine, but apparently Access manager 1 could not be started. Error from Webserver:
[14/Aug/2006:04:30:36] info (13937): WEB0100: Loading web module in virtual server [https-machine_1_FQDN] at [search]
[14/Aug/2006:04:31:48] warning (13937): CORE3283: stderr: Exception in thread "EventService" java.lang.ExceptionInInitializerError
[14/Aug/2006:04:31:48] warning (13937): CORE3283: stderr: at com.iplanet.services.ldap.event.EventServicePolling.run(EventServicePolling.java:132)
[14/Aug/2006:04:31:48] warning (13937): CORE3283: stderr: at java.lang.Thread.run(Thread.java:595)
[14/Aug/2006:04:31:48] warning (13937): CORE3283: stderr: Caused by: java.lang.InterruptedException
[14/Aug/2006:04:31:48] warning (13937): CORE3283: stderr: at com.sun.identity.sm.ServiceManager.<clinit>(ServiceManager.java:74)
[14/Aug/2006:04:31:48] warning (13937): CORE3283: stderr: ... 2 more
In effect, AM on 1 did not start. On rolling back the changes, things again worked like previously.
Will be really grateful for any help / insight / experience on dealing with the above.
Thanks!

Update to the above, incase anyone is reading:
We setup a similar setup in Windows, and it worked. Here is a detailed account of what was done:
1. Host 1: Start installer, install automatically, chose Directory server, Directory Administration server, Directory Proxy server, Web server, Access Manager.
All installed, and worked fine. (AMConfig.properties, serverconfig.xml, and the info in LDAP service, all pointed to HOST1:389)
2. Host 2: Start installer, install automatically, chose Directory server, Directory Administration server, Directory Proxy server, Web server, Access Manager.
All installed, and worked fine. (AMConfig.properties, serverconfig.xml, and the info in LDAP service, all pointed to HOST2:389)
3. Host 1: Started replication. Set to Master
4. Host 2: Started replication. Set to Master
5. Host 1: Setup replication agreement to Host 2
6. Host 2: Setup replication agreement to Host 1
7. Initiated the remote replica from Host 1 ----> Host 2
Note that since default installation uses abc.....xyz as the encryption key, setting this to same was not an issue.
9. Started webserver for Host 1 and logged into AM as amadmin.
10. Added Host 2 FQDN in DNS Aliases / Realms
11. Added http://HOST2_FQDN:80 in the Platform server (instance) list.
12. Started Host 2 webserver. Logged in AM on Host 2, things worked fine.
At this stage, note the following:
a) Host 1:
AMConfig.properties file has
com.iplanet.am.directory.host=host1_FQDN
and
com.iplanet.am.directory.port=389
serverconfig.xml has:
<Server name="Server1" host="host1_FQDN" port="389" type="SIMPLE" />
b) Host 2:
AMConfig.properties file has
com.iplanet.am.directory.host=host2_FQDN
and
com.iplanet.am.directory.port=389
serverconfig.xml has:
<Server name="Server1" host="host2_FQDN" port="389" type="SIMPLE" />
c) If one logs into AM, and checks LDAP servers for LDAP / Policy Configuration / Membership etc services, they all contain Host2_FQDN:389 (which makes sense, since replica 2 was initialized from 1)
Returning back to the configuations:
13. On Host 1, login into the Admin server console of the Directory server. Navigate to the DPS, and confgure the following:
a) Network Group
b) LDAP servers
c) Load Balancing
d) Change Group
e) Action on-bind
f) Allow all actions (permit modification / deletion etc.).
g) any other configuations required - Am willing to give detailed steps if someone needs them to help me / themselves! :)
So now, we have DPS configured and running on Host1:489, and distributing load to DS1 and DS2 on a 50:50 basis.
14. Now, log into AM on Host 1, and instead of Host1_fqdn:389 (for DS) in the following places, specify Host1_fqdn:489 (for the DPS)--
LDAP Authentication
MSISDN server
Membership Service
Policy configuation.
Verified that this propagated to the Policy Configuration service and the LDAP authentication service that are already registered with the default organization.
15. Log out of AM. Following the documentation, modify directory.host and directory.port in AMConfig.properties to point to Host 1_FQDN and 489 respectively. Make this change in AMConfig.properties of both Host 1 as well as 2.
16. Edit serverconfig.xml on both hosts, and instead of they pointing to their local directory servers, point both to host1_FQDN:489
17. When you start the webserver, it will refuse to start. Will spew errors such as:
[https-host1_FQDN]: Sun ONE Web Server 6.1SP5 B06/23/2005 17:36
[https-host1_FQDN]: info: CORE3016: daemon is running as super-user
[https-host1_FQDN]: info: CORE5076: Using [Java HotSpot(TM) Server VM, Version 1.5.0_04] from [Sun Microsystems Inc.]
[https-host1_FQDN]: info: WEB0100: Loading web module in virtual server [https-host1_FQDN] at [amserver]
[https-host1_FQDN]: warning: WEB6100: locale-charset-info is deprecated, please use parameter-encoding
[https-host1_FQDN]: info: WEB0100: Loading web module in virtual server [https-host1_FQDN] at [ampassword]
[https-host1_FQDN]: warning: WEB6100: locale-charset-info is deprecated, please use parameter-encoding
[https-host1_FQDN]: info: WEB0100: Loading web module in virtual server [https-host1_FQDN] at [amcommon]
[https-host1_FQDN]: info: WEB0100: Loading web module in virtual server [https-host1_FQDN] at [amconsole]
[https-host1_FQDN]: warning: WEB6100: locale-charset-info is deprecated, please use parameter-encoding
[https-host1_FQDN]: info: WEB0100: Loading web module in virtual server [https-host1_FQDN] at [search]
[https-host1_FQDN]: warning: CORE3283: stderr: netscape.ldap.LDAPException: error result (32); matchedDN = dc=sun,dc=com; No such object (DN changed)
[https-host1_FQDN]: warning: CORE3283: stderr: Got LDAPServiceException code=-1
[https-host1_FQDN]: warning: CORE3283: stderr: at com.iplanet.services.ldap.DSConfigMgr.getConnection(DSConfigMgr.java:357)
[https-host1_FQDN]: warning: CORE3283: stderr: at com.iplanet.services.ldap.DSConfigMgr.getNewFailoverConnection(DSConfigMgr.java:314)
[https-host1_FQDN]: warning: CORE3283: stderr: at com.iplanet.services.ldap.DSConfigMgr.getNewConnection(DSConfigMgr.java:253)
[https-host1_FQDN]: warning: CORE3283: stderr: at com.iplanet.services.ldap.DSConfigMgr.getNewProxyConnection(DSConfigMgr.java:184)
[https-host1_FQDN]: warning: CORE3283: stderr: at com.iplanet.services.ldap.DSConfigMgr.getNewProxyConnection(DSConfigMgr.java:194)
[https-host1_FQDN]: warning: CORE3283: stderr: at com.iplanet.ums.DataLayer.initLdapPool(DataLayer.java:1248)
[https-host1_FQDN]: warning: CORE3283: stderr: at com.iplanet.ums.DataLayer.(DataLayer.java:190)
[https-host1_FQDN]: warning: CORE3283: stderr: at com.iplanet.ums.DataLayer.getInstance(DataLayer.java:215)
[https-host1_FQDN]: warning: CORE3283: stderr: at com.iplanet.ums.DataLayer.getInstance(DataLayer.java:246)
[https-host1_FQDN]: warning: CORE3283: stderr: at com.sun.identity.sm.ldap.SMSLdapObject.initialize(SMSLdapObject.java:156)
[https-host1_FQDN]: warning: CORE3283: stderr: at com.sun.identity.sm.ldap.SMSLdapObject.(SMSLdapObject.java:124)
[https-host1_FQDN]: warning: CORE3283: stderr: at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
[https-host1_FQDN]: warning: CORE3283: stderr: at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
[https-host1_FQDN]: warning: CORE3283: stderr: at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
[https-host1_FQDN]: warning: CORE3283: stderr: at java.lang.reflect.Constructor.newInstance(Constructor.java:494)
[https-host1_FQDN]: warning: CORE3283: stderr: at java.lang.Class.newInstance0(Class.java:350)
[https-host1_FQDN]: warning: CORE3283: stderr: at java.lang.Class.newInstance(Class.java:303)
[https-host1_FQDN]: warning: CORE3283: stderr: at com.sun.identity.sm.SMSEntry.(SMSEntry.java:216)
[https-host1_FQDN]: warning: CORE3283: stderr: at com.sun.identity.sm.ServiceSchemaManager.(ServiceSchemaManager.java:67)
[https-host1_FQDN]: warning: CORE3283: stderr: at com.iplanet.am.util.AMClientDetector.getServiceSchemaManager(AMClientDetector.java:219)
[https-host1_FQDN]: warning: CORE3283: stderr: at com.iplanet.am.util.AMClientDetector.(AMClientDetector.java:94)
[https-host1_FQDN]: warning: CORE3283: stderr: at com.sun.mobile.filter.AMLController.init(AMLController.java:85)
[https-host1_FQDN]: warning: CORE3283: stderr: at org.apache.catalina.core.ApplicationFilterConfig.getFilter(ApplicationFilterConfig.java:262)
[https-host1_FQDN]: warning: CORE3283: stderr: at org.apache.catalina.core.ApplicationFilterConfig.setFilterDef(ApplicationFilterConfig.java:322)
[https-host1_FQDN]: warning: CORE3283: stderr: at org.apache.catalina.core.ApplicationFilterConfig.(ApplicationFilterConfig.java:120)
[https-host1_FQDN]: warning: CORE3283: stderr: at org.apache.catalina.core.StandardContext.filterStart(StandardContext.java:3271)
[https-host1_FQDN]: warning: CORE3283: stderr: at org.apache.catalina.core.StandardContext.start(StandardContext.java:3747)
[https-host1_FQDN]: warning: CORE3283: stderr: at com.iplanet.ias.web.WebModule.start(WebModule.java:251)
[https-host1_FQDN]: warning: CORE3283: stderr: at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1133)
[https-host1_FQDN]: warning: CORE3283: stderr: at org.apache.catalina.core.StandardHost.start(StandardHost.java:652)
[https-host1_FQDN]: warning: CORE3283: stderr: at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1133)
[https-host1_FQDN]: warning: CORE3283: stderr: at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:355)
[https-host1_FQDN]: warning: CORE3283: stderr: at org.apache.catalina.startup.Embedded.start(Embedded.java:995)
[https-host1_FQDN]: warning: CORE3283: stderr: at com.iplanet.ias.web.WebContainer.start(WebContainer.java:431)
[https-host1_FQDN]: warning: CORE3283: stderr: at com.iplanet.ias.web.WebContainer.startInstance(WebContainer.java:500)
[https-host1_FQDN]: warning: CORE3283: stderr: at com.iplanet.ias.server.J2EERunner.confPostInit(J2EERunner.java:161)
[https-host1_FQDN]: failure: WebModule[amserver]: WEB2783: Servlet /amserver threw load() exception
[https-host1_FQDN]: javax.servlet.ServletException: WEB2778: Servlet.init() for servlet LoginLogoutMapping threw exception
[https-host1_FQDN]: at org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.java:949)
[https-host1_FQDN]: at org.apache.catalina.core.StandardWrapper.load(StandardWrapper.java:813)
[https-host1_FQDN]: at org.apache.catalina.core.StandardContext.loadOnStartup(StandardContext.java:3478)
[https-host1_FQDN]: at org.apache.catalina.core.StandardContext.start(StandardContext.java:3760)
[https-host1_FQDN]: at com.iplanet.ias.web.WebModule.start(WebModule.java:251)
[https-host1_FQDN]: at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1133)
[https-host1_FQDN]: at org.apache.catalina.core.StandardHost.start(StandardHost.java:652)
[https-host1_FQDN]: at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1133)
[https-host1_FQDN]: at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:355)
[https-host1_FQDN]: at org.apache.catalina.startup.Embedded.start(Embedded.java:995)
[https-host1_FQDN]: at com.iplanet.ias.web.WebContainer.start(WebContainer.java:431)
[https-host1_FQDN]: at com.iplanet.ias.web.WebContainer.startInstance(WebContainer.java:500)
[https-host1_FQDN]: at com.iplanet.ias.server.J2EERunner.confPostInit(J2EERunner.java:161)
[https-host1_FQDN]: ----- Root Cause -----
[https-host1_FQDN]: java.lang.NullPointerException
[https-host1_FQDN]: at com.sun.identity.authentication.UI.LoginLogoutMapping.init(LoginLogoutMapping.java:71)
[https-host1_FQDN]: at org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.java:921)
[https-host1_FQDN]: at org.apache.catalina.core.StandardWrapper.load(StandardWrapper.java:813)
[https-host1_FQDN]: at org.apache.catalina.core.StandardContext.loadOnStartup(StandardContext.java:3478)
[https-host1_FQDN]: at org.apache.catalina.core.StandardContext.start(StandardContext.java:3760)
[https-host1_FQDN]: at com.iplanet.ias.web.WebModule.start(WebModule.java:251)
[https-host1_FQDN]: at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1133)
[https-host1_FQDN]: at org.apache.catalina.core.StandardHost.start(StandardHost.java:652)
[https-host1_FQDN]: at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1133)
[https-host1_FQDN]: at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:355)
[https-host1_FQDN]: at org.apache.catalina.startup.Embedded.start(Embedded.java:995)
[https-host1_FQDN]: at com.iplanet.ias.web.WebContainer.start(WebContainer.java:431)
[https-host1_FQDN]: at com.iplanet.ias.web.WebContainer.startInstance(WebContainer.java:500)
[https-host1_FQDN]: at com.iplanet.ias.server.J2EERunner.confPostInit(J2EERunner.java:161)
[https-host1_FQDN]:
[https-host1_FQDN]: info: HTTP3072: [LS ls1] http://host1_FQDN:58080 [i]ready to accept requests
[https-host1_FQDN]: startup: server started successfully
Success!
The server https-host1_FQDN has started up.
The server infact, didn't start up (nothing even listening on 58080).
However, if AMConfig.properties is left as it originally was, and only serverconfig.xml files were changed as mentioned above, web servers started fine, and things worked all okay. (Alright, except for some glitches when viewed in /amconsole. If /amserver/console is accessed, all is good. Can this mean that all is still not well? I am not sure).
So far so good. Now comes the sad part. When the same is done on Solaris 9, things dont work. You continue to get the above error, OR the following error, and the web server will refuse to start:
Differences in Solaris and Windows are as follows:
1. Windows hosts have 1 IP and hostname. Solaris hosts have 3 IPs and hostnames (for DS, DPS, and webserver).
No other difference from an architectural perspective.
Any help / insight on why the above is not working (and why the hell does the documentation seem so sketchy / insecure / incorrect).
Thanks a bunch!

Compilations are breaking my heart-simple question...

OK folks, this is a simple question - so why can't i find a clear answer anywhere? I am running Itunes 8, Win XP, been running Itunes for my music for about 4 years.
Current setup 3 users running Itunes on same pC.
My problem is when I browse my lbrary each song in my compilations are showing upas different albums e.g. "O Brother where art thou" has 14 different "albums" as do some home-made compilations I have been given.
"group compilations when browsing is selected" but obviously isn;t working
It's obviously simple but not to me...help
Thanks
Message was edited by: munstershug

You mention enabling the iTunes option to *Group compilations when browsing*, but have you also set the *Part of a Compilation* flag to Yes for each track of your compilations? See my recent post on Grouping Tracks Into Albums, in particular the topic One album, too many covers.
tt2

Need a simple answer for simple question???

simple question... what is the best way to export my fce movie and burn it on idvd for the best quality for genaral use ... sd..4x3 ratio tv.. lots of ken burn effects on photos... lots of sd video... ???
not so simple answer... i have read manuals.. apple discussions.. etc etc my eyes are blurry.. i have been exporting out of fce to qk time movie, then import to idvd and burn..
i get lots of wavy or jitter when doing kens burn effects on photos.. i have been told that 1 field must be missing.. and its better to take the qk time movie convert it again making sure hi quality is checked(movie properties 720 x 480) and self contained movie, then import to imovie ver 5.02 which has better codecs then to idvd ... an apple store tech said..
then another apple store tech said...dv pro or dv stream or interlaced or on and on and on
its not 16x9, or for the web or anything but simply burn it and give it to my grandma to play in a standard dvd player.. best quality.. period.. i know it won't any better than my source video but the wavy photos bother me..
help

The Apple store tech told you garbage. The quality will be the same. It's using the same QuickTime engine. There may be a difference because going through iMovie will go through a file conversion and the picture might be softened a little, which will mitigated this flicker you see.
The wavy photos can be a lot of things, most likely due to the nature of the images themselves and the movements you've done on them. What often works on still images is to apply a one pixel vertical motion blur in an application like Photoshop or Elements. This helps to reduce interlace flicker on motion when the material is brought into a video editing application.

A few simple questions from a new Iphone user

Hi a few simple questions, just got an iphone 2g - 2nd hand so not really sure what to expect. Anyway I guess my first question is about mine sometimes being a little slow - when I look at contacts and sometimes when sending a txt it slows down/freezes a little - normal?
Secondly Edge - I havent used it much but when I have its been painfully slow, is this normal - is it always really slow - cause I had read despite not being 3g Edge was actually pretty fast - what exactly is data roaming by the way? I mean I have been switched off as basically I dont wanna use the internet till next month when they change my contract to one I get unlimited access on - is that right?
Im having a problems syncing videos to it - it just wont sync some but will others and Im not sure why - theyre same file type and they used to sync to my ipod touch but now they wont for some reason
Cheers

I have the origina iPhone.
Downloaded 2.0, synced phone with everything UNchecked. Installed 2.0. Synced with all the options checked to reload my data. The iPhone has been great. Noticed a little lag when I opened contacts. Installed the new upgrade, and everything is back, no lag.
Edge is Edge and nothing more. It is slow compared to a strong 3g signal. But is liveable most of the time. Heavy traffic can slow it down to barely usable.
My four wheel drive club has a web site with a large photo section. I was standing out in the middle of parking lot in San Jose, Ca and showing a friend some photos. It opens up a page of small picts to choose from. Select a print and it enlarges, He was amazed at how fast they appeard. Especially given the quantity of photos.

HT4753 I have a very simple question: how do I view where Lion has autosaved my current version to (without the convoluted route of using finder)? In days gone by i'd simply use the save as function to see where it was being saved.

I have a very simple question: how do I view where Lion has autosaved my current version to (without the convoluted route of using finder)? In days gone by i'd simply use the save as function to see where it was being saved.

It's actually even easier than using Save As to see the full path to the currently open document. Just do a "Secondary click" on the document title in its window's title bar.
Like you, I relied upon Save As my whole life to check a file's location and considered it a must-have capability. Turns out it's even faster to use the single-click method to reveal the full path to the open document. It displays the entire path to the current document starting from the level of your Mac, and works for files stored on drives as well as iCloud.
If you're not sure how to do a secondary click, go into System Preferences, select Trackpad, Point & Click to find the current preference for secondary click on your Mac. If you happen to have a mouse with more than one button, it's probably the right button. As a trackpad user, I check the box to "Click or tap with two fingers," so a simple two finger tap on the title of an open document reveals its full path. This feature actually has been around for a very long time.
Note that this is not the same thing as the Autosave and Versions menu, which is exposed using a little drop down triangle to the right of the title. There is no visual clue for the presence of this feature - you just have to know it's there, probably because this feature goes all the way back to pre-OS X days.

Simple question about flex and AS 3.0

Hi, this might sound like a simple question so I apologize...
I have both a copy of flex 2 and 3, and i want to simply code in AS
3.0 not mxml. I referred to the help of both flex 2 and 3, and all
i could come up with is "you can add dynamic behavior to your
documents using actionscript", which means to me, you only write
your functions in AS and create instances with mxml (...ugh).
personally, i find mxml to be ugly (mainly because it looks like
html to me), and i'd rather not use it. coming from programming in
an IDE in Java, it seems like it would be nicer to have something
similar, all the while having the power and cool features of flash.
I'm not fully educated in this matter so i understand that i could
be totally wrong.
i mean, if i have to code in mxml, i will. i'm a web
programmer for a living, and if a more experience programmer said
something like "if you don't code mxml in flex, you'll never get a
job coding in flex", i would trust the advice, and learn the ugly
code. :)
yes, i do have Flash cs3, it's great but it seems like a pain
to me the way you organize classes.... i've only seen a few
tutorials, ones that explain how you cannot simply import a custom
class, you have tell your movie to link to it, put it in the same
directory, or manually name the package, it's sort of confusing.
my main point here is that i'm very eager to start building
apps in straight AS 3.0 instead of using flash cs3 (for some
projects), and it would be cool to get some help or be pointed in
the right direction.
to simplify:
can i write AS 3.0 and only as 3.0 in flex 2 or 3? how? can
you link me to a tutorial? any advise?
thanks!

Hey William, thanks for the post. It's a great coincidence
because I'm reading that book as well. I'm about half way through
it, and I love it. I installed mxmlc on my linux box and am writing
pure AS 3 apps. I think that's the way to go, though I know it's
not for everybody.
My problem with mxml is that it has a weird syntax for
function calls, and it's not as 'intuitive' for a person like me,
who came from C++ and Java programming in the past. I like writing
programs in the C++ and Java style syntax, and since so many other
languages use a similar syntax, I don't see any reason to learn the
nuances of mxml, unless I was getting paid to do it. As far as I
can tell there is no benefit.
I hate using Flash to write flash apps as well, I feel like
they become messy and confusing, especially when trying to write an
OOP application. I only use it if I want to move an object in a
very specific way and can't do it with the Tween methods.

One simple question

Similar Messages

Maybe you are looking for