One step at the time with DNS

Anyone who would be so kind and guide me trough the setup of dns on my LAN?
on my 5.th install now

ahh Camelot.. - just the one i hoped would answer.. (I can see you have answered many in here...)
Heres what i want to do: I want to run mailserver, webserver,dhcp, firewall and router on the leopard server.
I have a dsl modem (static ip ) connected to the server on ethernet and a lan that is connected trough the server to internet. That works ok. I can also reach my webserver both from inside and outside as of today. Mail seems to work from both sides too. Here comes the trouble:-)
I have two additional servers that needs to be reached from both lan and web on my lan.
all my services has correct dns resolves from the net.. They are as follows:
www.thure-trykk.no ->212.125.243.131 -> (website on the leopard server at 192.168.1.1)
mail.thure-trykk.no ->212.125.243.132 -> (mailserver on the leopard server at 192.168.1.1)
www.iway.thure-trykk.no ->212.125.243.134 -> (second webserver at lan 192.168.1.2)
www.godkjenning.thure-trykk.no -> 212.125.243.135 -> (third webserver at lan 192.168.1.3)
all of these needs to be reached from lan and wan by hostnames
Dont know it this was enough to tell you what i want to do ??

Similar Messages

  • No Internet acces or only one computer at the time

    Hi everybody,
    I'm a freelance IT supported and I'm new to Apple. I studied and always worked with PC but with people having more and more Mac at home I had to adapte.
    I have a problem at a customer's place which is kinda hard to explain. I'm unable to get Internet access on any devices connected to the WIFI. I tryed sevral setup and the best I can get is "one-device-at-the-time" (the last device that connects to the WIFI). I did screen captures of this setup.
    The setup isD-Link DSL-320B Modem (set as DHCP) --> AirPort Extreme (WAN Port) --> wireless devices (iMac, iPad, iPhone, PC, etc.)
    Unfortunatly, all the screen captures are in French (I'm in Switzerland) but since it's not literature, I think you can all get what's writen bellow.
    mode pont = bridge mode (I think this is how I actualy got one computer to access the web)
    I don't understand why the address is 169.254.xx.xx. Shouldn't it get a 192.168.1.x since the D-Link is setup as DHCP (see next screen capt) ? The DNS servers are the ones provided on the ISP info sheet but I don't think it's necessary to put them here, right ?
    strangely, the IP range didn't show up when I did the screen capture but it's 192.168.1.2 to 192.168.1.254
    I spent two unsuccessful hours last time, i'd realy like to make it right next time so I can actualy send them an invoice and eat more than pastas ;-)
    thanks for your help,
    Julien

    Hiya.. thanks for the lovely screen shots.. this is hard and would be impossible without them.
    Something odd is happening... I don't see anything wrong with your setup.
    What I do see is dlink doing its dinky toy dlink type stuff.
    The AE should have got an IP from the dlink. 192.168.1.x and as you have it bridged it should also pass packets to the dlink which would get IP for the wireless.. nothing wrong in any of that.
    It is failing .. and obviously not passing packets correctly on the ethernet link to the Dlink.
    DHCP discovery at the very least is failing..
    Look at your last screenshot of the dlink setup. Look at the IP handed to the AE. 83.79.62.39
    Where did that come from.. it says the AE is a client but the IP is some odd thing.
    Now did you happen to set the AE in DMZ of the dlink or did you use some other method to try and force this to work.. at some point it is passing .. perhaps an old public IP to the AE.. which is not correct.
    Your tech-it-easy computer plugged into the dlink is getting the correct LAN ip 192.168.1.2 clearly the AE has failed.
    I recommend you reset the Dlink to factory and redo the setup.
    If the ISP uses PPPoE, then setup the dlink in bridge mode and run the PPPoE client on the AE.. this is the best method.. but PPPoE is seldom used in Europe for whatever reason.
    If you use pppoa or ipoa or other dsl authentication then you must keep using the AE in bridge.
    Go back to the fundamental problem.. it is not passing packets over ethernet correctly. The AE is gigabit unless it is very old. Dlink I am guessing is 100mbit. There are occasional hitches.. if you have a switch 10/100 drag it along with you and plug it between the dlink and the AE.. and see if it then gets IP correctly. Check with another ethernet cord.. all the stuff you know.
    In the AE you can set wan port speed.. but you will need the AE in router mode.. ie it is NATting a public IP, but you will get double NAT.. as a test you can go for that.
    Use 100mbps full duplex.
    Of course you don't want to double NAT permanently.
    If you don't make progress.. post again..
    There is a manual way of bridging the AE.. we normally call it wan bypass.
    It is complicated so try the above before you do that.
    BTW,,, when the one computer does work, check what IP it is getting.. is it  83.79.62.39.. or whatever the public IP. If so the AE is definitely set wrongly in the DMZ of the dlink.

  • WRT45G: can only connect one pc at the time to internet, cannot login to router setup

    Hello,
    I don't get this. The complete network worked fine for ... years? After a call with the ISP about a general/different issue, we can now only connect one pc at the time to internet. (We were asked to take out cables and we've put them back).
    I've been trying and searching for an answer for hours.
    problem:
    We can only connect through the router to internet with only one pc at the time (the first pc we connect after starting up the router).
    Also we cannot get into the setup menu of the router at 192.168.1.1
    We've been trying to reset the modem for 10, 30 seconds.
    Auto resolve IP/DNS. DHCP is enabled.
    I also remembered that I pushed the SES button, it turned from orange to flashing bluish. I never knew aboutthis function, nor it is mentioned in the manual I downloaded. Now this SES indicator is off.
    Also WLAN and DMZ led are off.
    I downloaded EasyLink_Connect.exe, went through the setup. It recognises there's internet connection, but stops and says: cisco does not support this modem.
    Temp. replacing this WRT45G modem with another one did not resolve the issue.
    I have no clue what went wrong, what we did wrong, and how we can resolve this issue? Please help! Thanks
    Message Edited by Brammm on 11-27-2008 03:13 PM

    Okay! 
    1.  (results when having assigned a static IP) :
     Windows IP-configuratie
             Primair DNS-achtervoegsel. . . . .:
            Knooppunttype: . . . . . . . . . .: onbekend     (unknown)
            IP-routering ingeschakeld. . . . .: nee      (no)
            WINS-proxy ingeschakeld . . . . . : nee    (no)
     Ethernet-adapter LAN-verbinding:
             Verbindingsspec. DNS-achtervoegsel:
            Beschrijving . . . . . . . . . . .:
              VIA Compatable Fast Ethernet Adapter
            Fysiek adres. . . . . . . . . . . : 00-16-17-CE-D5-40
            DHCP ingeschakeld:. . . . . . . . : nee    (no)
            IP-adres. . . . . . . . . . . . . : 192.168.1.20
            Subnetmasker. . . . . . . . . . . : 255.255.255.0
            Standaardgateway. . . . . . . . . : 192.168.1.1
            DNS-servers . . . . . . . . . . . : 192.168.1.1
     (results without having assigned a static IP: automatic config.) :  
     Ethernet-adapter LAN-verbinding: 
            Verbindingsspec. DNS-achtervoegsel:
            Beschrijving . . . . . . . . . . .:
              VIA Compatable Fast Ethernet Adapter
            Fysiek adres. . . . . . . . . . . : 00-16-17-CE-D5-40
            DHCP ingeshakeld. . . . . . . . . : ja     (yes)
            Autom. configuratie ingeschakeld. : ja       (yes)
            IP-adres. . . . . . . . . . . . . : 84.30.99.32       
    Subnetmasker. . . . . . . . . . . : 255.255.254.0       
    Standaardgateway. . . . . . . . . : 84.30.98.1       
    DHCP-server . . . . . . . . . . . : 213.51.144.90
            DNS-servers . . . . . . . . . . . : 212.54.40.25
                                                212.54.35.25
    2.  I do have another router, when I try that one, the problem we have remains. So that's a bit strange to me. That one is supposed to be working.
    Does this SES function configure anything other than the modem? So, does it alter PC configurations? I have no clue.   We even start to wonder whether the ISP is able to set up their internet in a way that unables us to make use of a router? That would be ridiculous
    Message Edited by Brammm on 11-30-2008 04:03 AM

  • Check/uncheck record results on more than one step at a time

    I have one hundred plus sequence files and several thousand steps total. Checking and un-checking record results one step at a time takes a long time. I'd like to be able to select several steps at a time then check or un check the "Record Results" option for all those steps at once. How do I do this? I'm using TestStand 2.0

    Hi Kevin,
    Thanks for contacting National Instruments.
    Do you want to disable result recording for ALL sequences on this station? If so, you can turn on this option in the TestStand sequence editor (Configure >> Station Options, turn ON checkbox "Disable result recording for all sequences").
    However, if you only want to do this for selected sequence files, then Ray is correct - you would need to write an external routine that will automate this for you. Attached is a zipfile containing a VBScript that will iterate through one sequence file ("c:\test.seq") and change all steps (all sequences, including Main/Setup/Cleanup) to turn off "Record Results". It first saves a backup copy of the sequence file, makes the changes, then save
    s the modified sequence file. You can enhance this script to work for more than one sequence file by using Microsoft's FileSystemObject.
    The VBScript uses a DLL I created, which exposes the TestStand 2.0 Engine object as an ActiveX DLL. Before you can run the VBScript, you will need to register this DLL:
    regsvr32 TSEngine.dll
    Then, the VBScript can be executed just by double-clicking it. Hopefully this helps get you started toward creating an automated way of solving this problem!
    David Mc.
    National Instruments
    Attachments:
    ts2seqfiles.zip ‏4 KB

  • Only one user at the time can execute VE01 (due to blockage of VEIAV)

    Hi,
    As I understand it only one user at the time can execute VE01 (or MEIS for arrivals). If someone is already executing the VE01 transaction the error-message "Table VEIAV is blocked by user XX" appears. It does not matter if one tries to execute it for different legal entities - no parallel processing seems to be possible.
    This is a huge limitation for a global concern with many entities operating in the same SAP instance. Does anyone recognize this problem and are there any ways to get around it? It does not make sense that dispatches (VE01) and arrivals (MEIS) cannot be executed for several organizational units at the same time in parallel?
    Thanks in advance,
    Mats Hansson

    yes I know this problem.
    One should not maintain much thru this transaction.
    for me it is not more than an emergency transaction, as it is not really more than table maintenance thru SM30
    You should investigate what entries/changes the users have to make.
    Limit these manual entries by having better data in the system, so that SAP can itself create the entries for this table.
    Organize more, less users , maybe just one per company who shall maintain VEFU manually.
    Train them to prepare their entries before they start using VEFU.
    Explain that they should leave VEFU as soon as possible as the block other users.
    assign maintenance windows to the users.

  • We have 30 ipads at our school and it is great.  We are about 850 student on my school and everyone are using the ipads. One hour at the time. (we have a booking system.)   I teach music and are using Garageband. I need to find away were my students that

    We have 30 ipads at our school and it is great.  We are about 850 student on my school and everyone are using the ipads. One hour at the time. (we have a booking system.)
    I teach music and are using Garageband. I need to find away were my students that are working on a project can export the files and save them somewhere, so when they 7 days later open Garage band can import there song with all the correct  midi-tracks. When I export the song to Icloud the song become an Mp4 file (I think).  And I can import the files via Icloude.
    This is because too many times the song has been sabotages during the week
    Dan Sweden

    Dan,
    your students could store their projects in iCloud, only you would continously have to change the AppleIDs of the iPads, so each student could store the songs with their own AppleID.  I don't think this will be feasable.
    The other possibility would be to share the projects to iTunes and to download them to iTunes  on a Mac at the end of each lesson. Does your school have Macs? This will not work with PCs.
    See this link:  GarageBand for iPad: Get answers fast http://help.apple.com/garageband/ipad/1.2/index.html#chsec12c387
    Look at the section "Share GarageBand songs",   
    Send a GarageBand song to iTunes:
    -- Léonie

  • Lightroom won't export more than one image at the time

    I am having trouble exporting my RAW files as JPEG files. At first Lightroom 4.4 seemed to skip certain photos when exporting and now I'm unable to export more than one image at the time. How can I fix this? I didn't seem to have this problem before the 4.4 update, but then again, the 4.4 update has been running for a few days now. I run on a 32bit Windows 7 with 4GB of RAM.
    Lightroom has also been a considerable lot slower since the last couple of days, yet there have been no changes at all to my computer or system or anything - nothing's changed expect for the fact that Lightroom isn't behaving as it used to.
    Can anyone help me?

    I think I've found the problem - I've accidentally 'synced' my folder instead of importing the RAW files. Which brings me to my next problem and question - I've already edited the RAW files and would really like it if there's a way I could re-import the files without losing my changes/metadata, is there anyway that's possible?

  • Having problems with ipad mini and Siri. Works sporadically, will work once and then the second time not. Worked all the time with the original Mailbox app. Then started doing the same thing when I installed the new update so wondering if it is software?

    Having problems with ipad mini and Siri. Works sporadically, will work once and then the second time not. Worked all the time with the original Mailbox app. Then started doing the same thing when I installed the new update so wondering if it is software?

    Hi,
    I have the check box on a second Partition  but not on the Time Machine one
    I forget what I did now to get this called "Recovery HD"
    For the rest try https://discussions.apple.com/docs/DOC-4055  User Tip that links to Pondini's work on Time Machine.
    10:17 pm      Friday; May 2, 2014
    ​  iMac 2.5Ghz i5 2011 (Mavericks 10.9)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad

  • HT1222 Last time I did an update...I lost most of my music...thousands of songs and had to reinstall them!!!!  I am scared as **** to do another update!!  I have radio shows to do and can't afford to spend the time with this.  Help anyone?

    Last time I did an update...I lost most of my music...thousands of songs and had to reinstall them!!!!  I am scared as **** to do another update!!  I have radio shows to do and can't afford to spend the time with this.  Help anyone?

    A bit late for this advice now, but hopefully you'll know what to do next time.
    Empty/corrupt library after upgrade/crash
    Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
    See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
    When you get it all working make a backup!
    tt2

  • SWP works half the time with Vista 64, plus two installs

    Hey all,
     I understand now that SWP only works fully with vista 32 but I do have it working most of the time with vista 64.(only crashed once) My questions are
    1) For some reason on my uninstall folder it shows SWP twice.
    2) When I tried to uninstall one of them its said I was uninstalling part of windows, so I canceled it.
    3) Since its just for vista 32, will running it on vista 64 cause my computers security to be lower than normaL? I mean can a hacker take advantage of the fact that I'm running SWP on vista 64 even though its only made for vista 32.
    Thanks
    Marc
    Message Edited by marchatzi on 10-12-2009 07:35 PM

    Hi Katrina, I am back again.
    Got my Vista-64Bit PC 2 days back. It has been a long 2 days. Today I am trying to get iTunes and my iPod setup, but I am not sure where to go from here.
    I did download iTunes-for Vista 64Bit and installed. Right away it updated to 8.1. No problems. I then copied my entire collection of songs (the same ones from my OLD PC, and managed by iTunes) from the external drive to the NEW C: Drive and to the exactly same named folder.
    Now I don't know how to proceed.
    In the NEW Vista environment, I don't find the same folder structure that was in the old XP PC. The new Vista PC has the following four places with any reference to iTunes and iPOD.
    1. Muisc/iTunes - has 4 files (iTunes Library. iTunes Library Extras, iTunes Library Genius, iTunes Music Library) and i folder (iTunes Music)
    2. C/PKM/iTUnes/iTUnes Music -- this is my creation, and this is where I have all muisc files/tracks etc, was and to be managed by iTunes from this location.
    3. C:/Program Files (X86)/ Apple Software - has 4 files and 3 folders
    4. C:/Program Files (X86)/ iTunes -- has 4 folders and 9 files.
    5. C:/Program Files (X86)/ iPod -- has 1 folder (bin) and 1 file.
    I do NOT see any files with *.itl type extensions.
    I had also exported my Playlists (the file name was music.xml)
    Katrina, where do I go from here? -- need to be able to use the librayr from my old PC, all Ratings from my OLD PC, and my playlists form Old PC, and of course the total libary from the old PC.
    I do have the complete file structures for the OLD PC where iTunes and Apple had saved files and folders - there were three places in addition to my own creation of the location where I ahd saved all the music files. Please let me know if you would like to see the folder structures.
    Thanks.

  • TS3274 my IPad has one half of the screen with vertical multi colored stripes and the other half is normal.  Has anyone experienced this and has a solution?

    My IPad has one half of the screen with vertical multi colored stripes and the other half is normal.  Has anyone had this problem and if so is there a solution?

    You could have a hardware issue, but try this and see if it helps.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

  • Missed one letter at the time of creating account for icloud. how do i fix or create another email account?

    Missed one letter at the time of creating account for icloud. how do i fix or create another email account?

    Hi jtv123,
    Could you please tell us exactly what happens when you try to set up your account?
    With kind regards,
    David

  • I have a Time Capsule on which I back up 2 MacBooks and on my wife's machine she keeps having Airport Utility popping up all the time with a yellow button flashing on the left and a Red button on the right side with a "1" in the middle of it.

    I have a Time Capsule on which I back up 2 MacBooks and on my wife's machine she keeps having Airport Utility popping up all the time with a yellow button flashing on the left and a Red button on the right side with a "1" in the middle of it. Can any one tell me what is wrong. I read where when the yellow light was flashing there was a problem, but I am a novice at this and have no idea where to turn. It seems to be backing up on a regular basis.

    On the Mac......
    Open up Macintosh HD > Applicatons > Utilities > AirPort Utility
    Click on the Time Capsule icon, then click Edit in the small window that appears
    Click the Network tab at the top of the next window
    Change the setting for Router Mode from the current DHCP and NAT to read Off (Bridge Mode), then click Update at the lower right of the window, and wait a full minute for the Time Capsule to restart to a green light.
    Then.....very important
    Power off the Time Capsule and your Arris modem/router for a few minutes
    Start up the Arris first, and let it run a few minutes by itself
    Start up the Time Capsule next the same way
    Your network will now be correct, and your printing capabilities will improve.
    If Time Machine backups do not occur now, post back and we will tackle that next.

  • On XP Machine dedicated to Lookout 6.5. The Hypertrends are not moving at proper pace according to the scale at the bottom of the trend graph. After 60 seconds it is 40 seconds behind, so the trace makes up the time with a straight line an repeats.

    On XP Machine dedicated to Lookout 6.5.  The Hypertrends are not moving at proper pace according to the scale at the bottom of the trend graph.  After 60 seconds it is 40 seconds behind, so the trace makes up the time with a straight line and then repeats.  Even without any traces on the graph, it does the same thing.
    I've uninstalled and reinstalled the 6.5 software.  Nothing else runs on this machine.  It is dedicated to Lookout.  I've installed a gauge object, with the same datapoint that the hypertrend is trying to graph, that updates very rapidly with no problem, so doesn't appear to be a network problem.
    I'm only tracking one datapoint, at this time, until this issue is solved.  Help please?

    Here is the screen shot.
    Definitions for this post:
     - "streaming data" = Data coming in over ethernet from datapoint that is being polled.
     - "1 scale-second" = 1 second of time based on the scale on the bottom of the graph
    Remember that data continues to trace.  However, according to the scale at the bottom of the graph, the graph traces 60 seconds of streaming data in @10 scale-seconds, then displays .01 second of streaming data over 50 scale-seconds.  The .01 second of data is the long straight lines that you see between the rapid data traces that appear to be 50 scale-seconds.
    Even without any datapoints being traced, the graph clicks forward 1 scale-second every 6 real-time seconds.  It does this for @10 seconds then clicks forward  @50 scale seconds, instantly.  Then repeats, as you can see in the graph.
    The gauge that is on the same control panel, that you see in the screen shot, is tracking the same data point as the graph.  It is polling the data point at real time and never stops updating, so I know that the network is streaming just fine.
    513.850.9509 - if I can help clear things up.
    Attachments:
    LookoutFunkyGraph.jpg ‏347 KB

  • When I use Explored, ussually I diplay my pages in english, but Explore has a feature that you can point any word and it is translated from english to spanish (one one word at the time, not the complete page), does it is available in firefox?

    When I use Explored, usually I display my pages in English, but Explore has a feature that you can point any word and it is translated from English to Spanish (one one word at the time, not the complete page), does it is available in Firefox?

    I do not know the answer but if you look through the Add-ons under [https://addons.mozilla.org/en-US/firefox/search/?q=translation translate] you may find something suitable. There is of course also the well known Google translate [http://translate.google.com/#es|en|choose%20the%20language%20combinations%2C%20and%20can%20handle%20single%20words%0Awith%20some%20odd%20results service]

Maybe you are looking for