OneKey Recovery 6.0. Problem with back up operating system from recovery cd'ies

Hello, i have problem with back up operating system from recovery cdies.
When i acceped start button to backup partition system i get an alert "space not enough"
I had linux before and i whant change it to windows back. i deleted all ext partitions. I have all unlocated space.I shouldnt have problems.
Please help me

I would use something like Partition Magic or Acronis Disk Director to first create a FAT32 partion for your C: Drive where your OS will go and be sure to leave 10GB or so unallocated for the secondary FAT32 Partition where your "factory image" will go.
You then create a Logical Drive with the unallocated space and make it hidden (PM or ADD will do this). Install your OS (preferably Windows XP if you want less problems) and then after you have setup everything the way you want (drivers, applications, etc), then use Acronis True Image to create your "factory restore" image on the hidden partition and activate the Startup Recovery Manager.
This is the way I do it and it works like a charm!

Similar Messages

I am not getting any sound input on my microphone. There is no microphone input on my new macbook pro, so I am using my old one. Is this a problem with the new operating system? Did they simply remove any microphone software?

I am not getting any sound input on my microphone. There is no microphone input on my new macbook pro, so I am using my old one. Is this a problem with the new operating system? Did they simply remove any microphone software?

Check System Preferences > Sound > Output
Make sure the correct device is selected.

Problems with reinstallation - new operating system mac

Back in 2009 I bought the Adobe Creative Suite 4 for mac. Installation was no problem. A few weeks ago I got a new operating system, i.e. mountain lion.
Since the Adeobe suite didn't work properly anymore I deinstalled the whole packe and tried to reinstall it with the old licence number. Unfortunately it doesn't work anymore. What can I do? Thanks very much in advance for your help. e

what doesn't work? installation? some or all the programs?
and what error do you see? (attach a screenshot of the error.)

HT201366 Problem with Mountain Lion operating system

Hi All, Any advices appreciated.
I recently upgraded the operating system on my Imac to the new Mountain Lion OS. I purchased this via Apple Application store. The installation went fine, but then it started stuffing up my E-mail accounts - and eventually deleted all my historical E-mails. The new OS wouldn't recognise my mail accounts or allow me to send E-mails. I tried all the online tips with regards changing mail preferences and editing ingoing and outcoming server info and passwords and changing ports utilised. I spent endless hours on phone to internet provider, only to be told in the end that it was a Mac OS problem. In utter frustration I did a System Restore and re-installed the old operating system, which also restored the lost E-mail history.
I'm already out of pocket the $20 for Mountain Lion, but can anyone tell how you can safely install Mountain Lion so that it works with E-Mails? Has Apple released a fix for Mountain Lion?

The problems you describe are usually resolved by reindexing the mail database after the upgrade, a procedure that takes a few minutes.
Lion Mail: Reindex messages

All of my emails have vanished from inboxes on ipad and servers - is this a problem with the ipad operating system?, All of my emails have vanished from inboxes on ipad and servers - is this a problem with the ipad operating system?

Last night I went to check my emails on my ipad and noticed that all of my inboxes (gmail, yahoo and exchange) were completely empty. I logged on to each individual site on my computer and the inboxes were empty there as well, with no trace of the lost messages in any trash folders or other folders. Obviously this is completely unacceptable as I have lost hundreds of important emails. Upon searching online I found that other people have experienced the same exact thing but apple has provided no explanation. As the only device that I use to access these 3 email accounts is my ipad I feel like it must have come from there. The chance of all 3 servers malfunctioning and clearing my inboxes at exactly the same moment last night is too ridiculous to contemplate, despite being suggested by the customer service advisor that I just spoke to. And I have no other evidence that my accounts have been compromised, and they have separate usernames and passwords anyway. Has this happened to anyone else? Or can anyone provide any sort of explanation? Thank you

You're welcome. As to checking speed go to http://speedtest.net/ and it will choose the closest server for you. BTW, whatever you do, don't click on the robot icon that says "Start Scan" or MacKeeper below that. Only use the speed test in the middle that has the button BEGIN TEST on it. It will run a download speed test first and then an upload speed test. The download test will give a much faster response.

Can I convert an old IMAC computer with OS 9 operating system from being "dial up" to high speed?

Can anyone tell me how I can convert my old IMAC from "dial up" to go on the internet as high speed? I have an ISP provider for a more modern computer that I own, but I really would like to use my old IMAC on the internet as well? How can I make it compatible with high speed internet? If I try to go on line, the internal modem "dials up". How can I change that and cause it to communicate with my external high speed modem?

Any iMac can connect by ethernet to the router.
You'll need to disable the modem and set up the network config.
Too long since I used OS9 to guide you on that bit; ask in the correct forum;
https://discussions.apple.com/community/mac_os/classic_mac_os or;
https://discussions.apple.com/community/desktop_computers/imac_powerpc

Can't back-up new iMac with fusion HD. The back-up proceeds to within 10% of the total storage needed and then the "of" number increases. I suspect there is a problem with backing up the fusion drive. We have a new 3 TB time Capsule. Any ideas?

Can't back-up new iMac with fusion HD. The back-up proceeds to within 10% of the total storage needed and then the "of" number increases. I suspect there is a problem with backing up the fusion drive. We have a new 3 TB time Capsule. I tried excluding different parts of the software from the back-up but it didn't make any difference. I even tried exluding "invisible items" to no avail. Any ideas?

When you setup the wireless and ethernet in the computer.. ipv6 will be on automatic.. this is wrong for the latest TC firmware and airport utility. http://support.apple.com/kb/TS4597
Go to the wireless and ethernet setup in preferences and change ipv6 to link local.
Once you do the big backup by ethernet the wireless will function fine for incremental.. it is obviously not estimating the size correctly..
A full back-up on the iMac would be about 650 GB. The partial updates that I have been trying start out at 115MB and keep growing indefinitely. The original back-up never finished nor have any of the follow-up attempts.
The first estimate should be the full backup but it will keep growing as the backup advances.. I would also delete any inprogress files to make sure it is not messing up .. delete even a sparsebundle if there is one for the imac on the TC and start afresh once you have ethernet connection.
See A10 here.
Pondini may have some other clues there to give you an idea of why the backup is slow or not finishing.. there is a lot of issues with TM when it decides not to work.

HP 4622 All in One Printer: Problem with Printer or Ink System

Problem with Printer or Ink System Error OXC19a0027.

charleshia wrote:
Thanks so much for replying to my post. I tried the fist suggestions and they did not work. So, I attempted to move on Dow to the cleaning of my printer. I am the the first to admit that I'm not the genius when it come to electronics buys, my printer do not seem to have what is described in the photos. I'd like to upload a photo of my ink cartage but do not know how.
Charleshia, you can upload a photo here to reply. Click Reply, then on the window you'll see the image below..
click the one which has the red box, it's where you insert the photo
Going back on your issue.. the basic step would be.. take out the inks then close the door... what error message you got? If it's saying "Missing Ink Cartridge" just hit OK. Unplug the power cable at back of the printer, plug it back in.. Clean the copper contacts on the ink cartridges using a lint free cloth then reinstall them. Let me know if it resolved it or not.. I can only give basic troubleshooting here

When I print a 4x6 color picture using an iMac with the latest operating system using a Canon MX892 printer, faint black lines appear every 3/16 of an inch. When I print the same picture using iPhoto there is no problem.

When I print a 4x6 color picture using an iMac with the latest operating system using a Canon MX892 printer, faint black lines appear every 3/16 of an inch. When I print the same picture using iPhoto there is no problem. Any suggestions?

What is the resolution of the picture that you are trying to print?
Go to Image>resize>image size, read the resolution in px/in, then report back, please.
Also, are you in a position to try printing with another printer in an attempt to narrow this down?

"Problem with printer or ink system"

Hello, so this morning I printed out a paper and I saw I was almost out of black ink. I replaced the cartridge and everything was okay. When I went to print out another paper I received the error message "Problem with printer or ink system... 0x6100004e" I went to HP support and found a whole bunch of solutions. I went through the first few, there is no paper jams, but then I realized my carriage was either not leaving the dock or it would come all the way left just to go right back. When I open the door, its like the printer thinks the carriage is moving because it keeps turning the way it normally would. I tried resetting it, and looking up other solutions but nothing. My warranty was up in May. It had never had this problem when I changed the cartridges before, so I really need all the help I can get.

Hi andre2015,
Please perform the steps from the link below and this will resolve the issue.
http://support.hp.com/us-en/document/c03253201
---- If my answer was helpful please click the Kudos star.
If your problem is solved please click the Accept as Solution button so other forum users can use the solution.
Regards
Aneesh

Problem with correlation on QA systems

Hi all
i need help!!!
I have a problem with correlation on QA systems!!!!
I have exported file (SCVW and CS) from DEV system and imported into QAL system!
I ve changed the parameters of CCs!!
But messages on sxi_moni doesn't meet correlation!!!!
The same interface on DEV system work fine, everything it's ok!!!
Everyone can help me? What could be the problem?
Tnx all

Hi Prateek
Scheduled Background Job for Event Queue has a red flag in QA, while all flags are green on Dev!!!
What I sholud do?

HP Officejet Pro 8600 "Problem with Printer or Ink System'

A gander at this forum suggests I am one ofa multitude of people perplexed by this issue. There is a notation beside one enquiry which says 'Problem Solved'.... well it isn't for me. My printer (typical!) is one month out of warranty. I had to replace the black cartridge and, when I did, it came up with this error prompt. I then replaced all the other cartridges. HP suggests removing the printhead and following that they say place it 'upside down on a clean sheet of paper'... NO instructions for cleaning it!! When it is replaced in the printer they suggest you 'rock the printhead left and right to make sure that the printhead fully seats in the carriage' and if THIS doesn't fix things 'try reseating the printhead up to 3 times'... This in itself is an admission of an 'issue' with this product. It doesn't sound like a very scientific engineering 'fix' to me!
A new printhead costs almost what we paid for the printer a year ago. I hate consigning anything to landfill that I can avoid... unfortunately it looks like that is where this unit belongs...

Hi @Robin_Perth,
Welcome to the HP Forums!
I am sorry to hear about you getting the problem with printer or ink system error, with your HP Officejet 8600, but I am happy to look into this for you!
I am assuming you have already been through this guide, A 'Problem with Ink System' Error Message Displays on the Control Panel or Computer During Setup.
If this guide does not resolve the issue, please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. Country-language selector.
This guide, Limited Warranty for HP Ink Cartridges and Customer-Replaceable Printheads for HP Inkjet Supplies, will help you to determine if your printhead is still in warranty or not.
Hope this helps!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

The problem is with the new operating system and sending photo via email when used in my iPad. From photo I selected 3 photos to send via email. I choose the upload key and choose to send by email. Typing text on the email is very slow.

The problem is with the new operating system and sending photo via email when used in my iPad.
From photo I selected 3 photos to send via email. I choose the upload key and choose to send by email. Typing text on the email is very slow. This is solved by saving the email as a draft and opening the email again from mail.
Can you amend he system to allow emails to be sent from photo as previously.

Have you tried restarting or resetting your iPad?
Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after the iPad shuts down, then press the On/Off button until the Apple logo appears.
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds). Ignore the "Slide to power off"

Problem with: select 'c' as X from dual

Problem with 'select 'c' as X from dual'
I get 2 different results when I execute the above with SQLPlus (or java) depending on the instance I am connected to. For one instance the result is a single character and for the other the character is padded with blanks to 32 chars in the SQLPlus window (and java). Does anyone know what database setting causes this to happen? Is it a version issue ?
Test #1: Oracle 9.2.0.6 - SQLPlus result is padded with blanks
SQL*Plus: Release 9.2.0.1.0 - Production on Mon Dec 10 09:27:58 2007
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected to:
Oracle9i Enterprise Edition Release 9.2.0.6.0 - 64bit Production
With the Partitioning option
JServer Release 9.2.0.6.0 - Production
SQL> select 'c' as X from dual;
X
c
SQL>
Test #2 Oracle 9.2.0.1 SQLPlus result is a single character.
SQL*Plus: Release 9.2.0.1.0 - Production on Mon Dec 10 09:29:27 2007
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected to:
Oracle9i Enterprise Edition Release 9.2.0.1.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.1.0 - Production
SQL> select 'c' as X from dual;
X
c
SQL>

Using 9.2.0.6 On AIX 5.2 I get the single byte result:
UT1 > select 'c' as X from dual;
X
c
If the databases are on different Oracle Homes you may want to check the sqlplus global logon files for any set commands.
If you executed the two sql statements from different OS directories you may also want to check your sqlpath for sqlplus .logon files.
Try issueing clear columns and repeating the statement. Are the results the same?
HTH -- Mark D Powell --

I'm using mac with the newest operating system (snow leopard 10.6.7). since I've updated to Firefox 4 It doesn't display Hebrew fonts- I didn't have any problems with it before the upgrade and in safari I don't have this problem.

Hello, I'm using Mac with the newest operating system (snow leopard 10.6.7). since I've updated to Firefox 4 It doesn't display Hebrew fonts… I didn't have any problems with it before the upgrade and in safari I have no problem with it. please help me- I don't like to use safari a my browser...

elly903 wrote:
Before commenting - I CANNOT install Mavericks because it'll mess up the versions of Filemaker Pro and Quicken that I use regularly...
Quicken 2007 for Intel (Snow Leopard, Lion, Mt. Lion and Mavericks) for $15:
http://quicken.intuit.com/personal-finance-software/quicken-2007-osx-lion.jsp
It will input your Quicken PPC data file directly if it was Quicken 2005 through 2007. If older you need Quicken 2006 or 2007 PPC first to convert your data file; and this update must be done BEFORE you upgrade to Mavericks:
http://quicken.intuit.com/support/help/patching/quicken-2006-manual-updates--mac -/GEN82200.html
Filemaker Pro PPC (in this case 7) running in Snow Leopard Server installed into Parallels for use in Lion, Mt. Lion and Mavericks:
[click on image to enlarge]
Snow Leopard Server: 1.800.MYAPPLE (1.800.692.7753) - Apple Part Number: MC588Z/A (telephone orders only)
This solution allows you to run your Photoshop Elements in Mavericks concurrently with Filemaker Pro PPC. Mavericks is a free download.

OneKey Recovery 6.0. Problem with back up operating system from recovery cd'ies

Similar Messages

Maybe you are looking for