Online export and import in DS6

Hello,
We are running Sun Java System Directory Server Enterprise Edition 6.0 on Solaris 10.
We need to export ou=people,o=xyz.com,dc=xyz,dc=com ONLINE and export to other Server (running same version) ONLINE (without stopping the services). So i ran the below:
./dsconf export -h webmail.xyz.com -p 389 ou=people,o=xyz.com,dc=xyz,dc=com ppl.ldif
prompts for "cn=Directory Manager" password and after entering it says "ou=people,o=xyz.com,dc=xyz,dc=com" does NOT exist. But it actually exists.
We're able to export "dc=xyz,dc=com" without any problems but we need ou=people only.
Appreciate if anyone could provide solution with exact commands to run for export and import (without stopping the DS)
Thanks much
Prvn

"dsconf export" operates only on suffix DNs (i.e., usually the base of your DIT which corresponds to the LDBM backend database).
Usage (from the dsconf manpage):
dsconf export [-h host] [-p port] [-aQ] [-f FLAG] ... [[-s DN] ... | [-x DN] ...] SUFFIX_DN [SUFFIX_DN...] LDIF_FILE
Look into these options and see if they can help limit its output:
-s DN
--include DN
Exports all data under specified DN.
-x DN
--exclude DN
Does not import or export data contained under the specified DN.

Similar Messages

Guide me for exporting and importing data from oracle 10g to oracle 9i

I have been trying export and import options in oracle but m not very clear about the procedure..
Also when i am logging in as Scott/tiger i am facing an error
ORA 1542 - tablespace 'USER' is offline and cannot allocate space in it.how to resolve it

Hello,
I see two questions.
ORA 1542 - tablespace 'USER' is offline and cannot allocate space in it.how to resolve it About the error ORA-01542 you have to bring the Tablespace USERS online:
http://www.error-code.org.uk/view.asp?e=ORACLE-ORA-01542
If you cannot bring it online you may have to Recover it first.
I have been trying export and import options in oracle but m not very clear about the procedure..About the Export in 10g and Import in 9i (9.2 or 9.0.1 ?), you have to export with the Export utility of the Target Database (the lowest Database version here: 9.0.1 or 9.2) then, you have to Import to the Target Database using its Import utility (in 9.0.1 or 9.2).
The following Note of MOS may guide you:
Compatibility Matrix for Export And Import Between Different Oracle Versions [Video] [ID 132904.1]
NB: You cannot use here the DATAPUMP.
Hope this help.
Best regards,
Jean-Valentin

Query on Database Export and Import

Hi Techies,
Currently we are running our Database on Oracle 10g and SAP on4. and OS is HP UX 11.11.
We have a plan to migrate our HW from PA-RISC to Itanium and at the time of Production migration we are planning to use Export and Import method to get free space.
Our plan is as below:
We will not touch the original Production, Just restore the DB into new server.
And post restore we will create the space on new server equallent to our DB size.
Then will perform DB export from the new system to the null space
Then Import the DB into same system.
Here my queries are:
1) Is it possible to export and Import the Database from/to null space?
2) We have 2T size of DB, And good resources like 32G Ram, 12 CPUs etc. How much time can be expected to perform Export and Import?
3) What are the challenges we can expect?
4) Minimum how much of free space we can expect with this option?
Regards,
Nick Loy

So with test runs I can expect rapid speed in DB export and Import (1T/H)........If I have good system then Database export and Import gets complete within 2 hrs (Database size is 2T).
Well 1tb is at the very top of expectations here, you should be careful. I did an export/import of a 1.5tb database of an ERP system lately. We did parallel export (40 processes) / import (20 processes) using distmon, source was HP IA64, target Linux x64_64. The disks were midrange SAN storage systems on both sides. After tuning we managed to do in 6-7hrs.
But in your case, if you only have one system, this could mean you have to drop the source db first and then recreate the target db on the same disks. The creation of the 1-2tb database files alone can take up more than 1 hour , besides that you don't have an easy fallback.
If you have a test system that is comparable from size and hardware perspective, then i suggest you try a test export to get a feeling for it.
What about the Online re-org of database? What would be the best way to get free space within minimum downtime?
Theoretically you should be able to gain more or less the same amount of space doing online reorgs. The advantage is less downtime, the downside is the reorgs will be running over a longer time period and put additional load on the system.
Cheers Michael

How to export and import Portal Components

Hi,
I had developed few components like (Forms, Reports, Frames etc.,) in Oracle Portal release 2. Now, I need to make available all the components on my Client's machine. I like to know how to export and import these components.
If any can help in this, it will be a great help for me...
Thanks in Advance...
Sudheer

Hi,
I had developed few components like (Forms, Reports, Frames etc.,) in Oracle Portal release 2. Now, I need to make available all the components on my Client's machine. I like to know how to export and import these components.
If any can help in this, it will be a great help for me...
Thanks in Advance...
Sudheer Hi Ravikanti,
Here are two things you can do to get started.. In 9iAS Release 2, Export/Import functionality is provided via a set of export/import utilities included with 9iAS Portal.
1) If you have not had the opportunity yet, a good place to start is to download and review the Oracle9iAS Portal 9.0.2.2 Export/Import FAQ posted on portalcenter.oracle.com.
Here is the URL for the Portal 9.0.2.2 Export/Import FAQ:
http://portalstudio.oracle.com/pls/ops/docs/FOLDER/COMMUNITY/OTN_CONTENT/MAINPAGE/DEPLOY_PERFORM/EXPORT_IMPORT_FAQ_1127.HTM
2) For official documentation on Portal 9.0.2 Export/Import, refer to the Task Help in the Online Documentation for Portal Import/Export (accessible from the question mark help icon within the "Browse Transport Sets" wizard.)
Best Regards,
Harry

Bulk Export and Import

Hi,
I need help about export and import records(i.e)
How can we export overall users and how can we import overall users from another database.
For example
we are switched to oracle 8i to 10g, from that
we want to export all users records from oracle 8i and than
import that file to 10g without creating a users.
Because we need same structure from 8i to 10g
venki
null

Sorry, i face a new problem,
when i was imported the file. It'll never stored in oracle 10g database,
IMP-00017: following statement failed with ORACLE error 12913:
"CREATE TABLESPACE "TEMP" DATAFILE 'D:\ORACLE\ORADATA\ORA\TEMP01.DBF' SIZE "
"5628M       AUTOEXTEND ON NEXT 655360 MAXSIZE 32767M DEFAULT STORAGE(INIT"
"IAL 65536 NEXT 65536 MINEXTENTS 1 MAXEXTENTS 2147483645 PCTINCREASE 0) ONLI"
"NE TEMPORARY "
[b]IMP-00003: ORACLE error 12913 encountered
ORA-12913: Cannot create dictionary managed tablespace
IMP-00017: following statement failed with ORACLE error 3249:
"CREATE TABLESPACE "TOOLS" DATAFILE 'D:\ORACLE\ORADATA\ORA\TOOLS01.DBF' SIZ"
"E 10485760       AUTOEXTEND ON NEXT 327680 MAXSIZE 32767M DEFAULT STORAGE"
"(INITIAL 32768 NEXT 32768 MINEXTENTS 1 MAXEXTENTS 4096 PCTINCREASE 0) ONLIN"
"E PERMANENT "
IMP-00003: ORACLE error 3249 encountered
ORA-03249: Uniform size for auto segment space managed tablespace should have atleast 5 blocks
IMP-00015: following statement failed because the object already exists:
"CREATE TABLESPACE "INDX" DATAFILE 'D:\ORACLE\ORADATA\ORA\INDX01.DBF' SIZE "
"20971520       AUTOEXTEND ON NEXT 1310720 MAXSIZE 32767M DEFAULT STORAGE("
"INITIAL 131072 NEXT 131072 MINEXTENTS 1 MAXEXTENTS 4096 PCTINCREASE 0) ONLI"
"NE PERMANENT "[pre]
I got this kind of error, that may the problem is
oracle 8i in windows 2000 and
oracle 10g in Linux
So the tablespace dictionary might be problem?
else whatever please suggest me...
venki

WSUS - Server 2012 R2 - Export and Import

Greetings,
I have a Server 2012 R2 system with the WSUS role installed. This server resides on a disconnected network so we must bring updates from an online WSUS server. I have experience performing successful exports and imports in the past with Server 2008
R2 and WSUS 3.0 SP2 (with KB2828185). However, I have yet to get a successful import on Server 2012 R2. The issue I am experiencing comes after what appears to be a successful import. All of the updates show up in the catalog, but none of
the approvals are there. I approve the relevant updates and the number of updates needing files on the status screen increase, but they never verify the content. The individual updates are stuck indefinitely waiting for content with no errors to
be found anywhere. Both servers have identical OS and WSUS configuration. Here is my procedure.
Source Server
- Approve/Decline relevant updates
- Wait for download to finish
- Run Server Cleanup Wizard
- Backup WSUSContent directory using 7-Zip to break into DVD size files
- wsusutil.exe export export.xml.gz export.log (I've tried export.cab and export.gz, neither produces a different result)
- Copy and extract all content to disconnected server.
- Import metadata with "wsusutil.exe import export.xml.gz import.log"
As I said, I get no related error messages in any event log, SoftwareDistribution.log, WindowsUpdate.log, Change.log.
When I've done this in the past with WSUS 3.2, the status dashboard would show all the approved updates that require content and that number would quickly decrease as the system would validate the files in the WSUSContent directory. This is occurring
on both my test server and my live server. I'm confident that I have missed something, but I need help. Anything that anyone can offer would be appreciated.

Hi Wayne,
Before we export and import updates, we should confirm that the settings for express installation files and update languages on the WSUS export server match the settings on the WSUS import server. If these settings do not match, updates will not
be correctly applied.
>> I approve the relevant updates and the number of updates needing files on the status screen increase, but they never verify the content.
Please try to run wsusutil reset.
If issue persists, please check if the WSUS content folder has the proper configuration.
Besides, could you please restart the export WSUS server and export/import again?
Best Regards.
Steven Lee Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Question regarding export and import of Hyperion Security during upgrade

Hi Guys,
We are upgrading Essbase, Integration Services from 7x to 9x which are utilizing Hyperion Hub and we are going to follow the method of uninstalling 7x and reinstalling 9x components.
Now my question is, what is the best way of transferring security from 7x to 9x. I heard that Advanced Security Manager can be used to export and import back security. Or is there any
other way of doing it??
Can someone please enlighten me on this.
Thanks in advance
K

Ihatelightroom wrote:
First let me say that any software that comes without a save button should be sold with a warning label.
Why?
Question 1: I have having an issue comprehending how to save a photo. In my case I select the photo, zoom in on the subject, export it to my desktop. The pciture on my desktop does not incorporate the change. Am I missing a step? What do I need to do to export it with this change? I actually watched a You Tube video on this and could not see what i was not doing.
You must have selected the wrong option in the Export dialog box. Under "File Settings", you need to select JPG and not "Original". Of course, you probably need to do some additional viewing of videos (or some reading) to learn that most people's workflow does not automatically include a "Save" or "Export" after editing the photo. It's not a necessary part of Lightroom's workflow, unless you need the photo for some non-Lightroom activity.
Question 2: I just installed Lightroom and am trying to import my 12k strong photo collection. The Import button pulls in about 2k and then cannot find anymore. The photos are stored in folders by date within a master folder. I am selecting the master folder. I can go in and import the sub-fodler individually. However i do not want to do that 200 times.There is no apparent way to go into the subfolder level and select more than one folder.
In the Import dialog box, on the left, under "Source", there is a checkbox that says "Include SubFolders". Make sure this is checked.
Seriously, you need to spend some time reading introductory material about LR because Lightroom does not work like any other photographic software you might have used in the past. You are handling it as if it was no different than standard photo editing software, and you are going to be frustrated if that is your mindset. See the videos at adobe.tv and read this: http://www.flickr.com/groups/adobe_lightroom/discuss/72157603590978170/

I am using Iphoto 11 ver 9.4.3 on mac using oxs 10.8.5 i want to export calendar projects to an external hard drive. what is the easiest way to do this? i have tried export and import but it didn't seem to work.

I am using Iphoto 11 ver 9.4.3 on mac using oxs 10.8.5 i want to export calendar projects to an external hard drive. my goal is to store them in an external hard drive so it doesn't use up memory on the mac hard drive. is it possible to copy the specific projects without copying the entire library? what is the easiest way to do this? i have tried export and import but it didn't seem to work.

What do you not understand?
You can duplicate the iPhoto library (command - D ) and delete everything except the project and its photos from the copy and move that
Or
However the calendar takes very little space - it is simpy database entries - it is the photos in the calendar that take space - and for most people you would wnat to keep those photos in your library
you can use a photo in 50 calendars and it still is only one photo in your library - as I explained calenders do not exist as such - they are simply database entries telling iPhotop how to display the calendar - they take almost no space at all
LN

SQL Developer 2.1: Problem exporting and importing unit tests

Hi,
I have created several unit tests on functions that are within packages. I wanted to export these from one unit test repository into another repository on a different database. The export and import work fine, but when running the tests on the imported version, there are lots of ORA-06550 errors. When debugging this, the function name is missing in the call, i.e. it is attempting <SCHEMA>.<PACKAGE> (parameters) instead of <SCHEMA>.<PACKAGE>.<FUNCTION> (parameters).
Looking in the unit test repository itself, it appears that the OBJECT_CALL column in the UT_TEST table is null - if I populate this with the name of the function, then everything works fine. Therefore, this seems to be a bug with export and import, and it is not including this in the XML. The same problem happens whether I export a single unit test or a suite of tests. Can you please confirm whether this is a bug or whether I am doing something wrong?
Thanks,
Pierre.

Hi Pierre,
Thanks for pointing this out. Unfortunately, it is a bug on our side and you have found the (ugly) "work-around".
Bug 9236694 - 2.1: OTN: UT_TEST.OBJECT_CALL COLUMN NOT EXPORTED/IMPORTED
Brian Jeffries
SQL Developer Team

Require help in understanding exporting and importing statistics.

Hi all,
I am bit new to this statistics.
Can anyone please explain me in detail about these commands.
1) exec DBMS_STATS.GATHER_TABLE_STATS (ownname => 'MRP' , tabname => 'MRP_ATP_DETAILS_TEMP', estimate_percent => 100 ,cascade => TRUE);
2) exec DBMS_STATS.CREATE_STAT_TABLE ( ownname => 'MRP', stattab => 'MRP_ATP_3');
3) exec DBMS_STATS.EXPORT_TABLE_STATS ( ownname => 'MRP', stattab => 'MRP_ATP_3', tabname => 'MRP_ATP_DETAILS_TEMP',statid => 'MRP27jan14');
4) exec DBMS_STATS.IMPORT_TABLE_STATS ( ownname => 'MRP', stattab => 'MRP_ATP_3', tabname => 'MRP_ATP_DETAILS_TEMP');
I understand that these commands are used to export and import table statistics.
But please anyone help me in understanding this indetail.
Thanks in advance.
Regards,
Shiva.

Shiva,
Please post the details of the application release, database version and OS.
Please see (FAQ: Statistics Gathering Frequently Asked Questions (Doc ID 1501712.1) -- What is the difference between DBMS_STATS and FND_STATS).
For exporting/importing statistics summary of FND_STATS Subprograms can be found in (Doc ID 122371.1)
http://etrm.oracle.com/pls/et1211d9/etrm_pnav.show_details?c_name=FND_STATS&c_owner=APPS&c_type=PACKAGE&c_detail_type=source
http://etrm.oracle.com/pls/et1211d9/etrm_pnav.show_details?c_name=FND_STATS&c_owner=APPS&c_type=PACKAGE%20BODY&c_detail_type=source
Thanks,
Hussein

Language Problem while exporting and importing data

hi,
I have Oracle version 8.1.7.0.0 installed on one server and 9.2.0.1.0 installed on new server.
I'm copying and pasting my version info from SQL*Plus:
SQL*Plus: Release 8.1.7.0.0 - Production on Mon Aug 22 10:46:31 2005
(c) Copyright 2000 Oracle Corporation. All rights reserved.
Connected to:
Oracle8i Enterprise Edition Release 8.1.7.0.0 - Production
With the Partitioning option
JServer Release 8.1.7.0.0 - Production
SQL>
SQL*Plus: Release 9.2.0.1.0 - Production on Mon Aug 22 12:30:06 2005
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected to:
Oracle9i Enterprise Edition Release 9.2.0.1.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.1.0 - Production
SQL>
I created new user on my new server from enterprise manager.
Exported user from the old server and imported in the new server.
i.e: from Oracle8i Enterprise Edition Release 8.1.7.0.0, I did
c:\>exp system/manager file=abc.dmp owner=abc
Then on the new server Release 9.2.0.1.0, I did
c:\>imp system/manager file=abc.dmp fromuser=abc touser=abc
I'm using Arabic Language on my both servers. NLS_LANG parameter on both the servers is AMERICAN_AMERICA.WE8MSWIN1252.
On both the servers I'm able to insert and select data in arabic.
However, after I export the data from old server to the new server, the arabic data comes in question marks.
If I create new table and insert arabic data on new server's user abc it is displaying well. Only the data which I exported and imported is not showing arabic.
On both old and new servers operating system is Windows XP.
I'm stuck with this problem. Anybody having any idea about how to solve this problem please help.
Thank you all in advance.
Regards

Let me be clear here. Storing Arabic data in a WE8MSWIN1252 database is not supported by Oracle and will lead to problems. You are incorrectly using the NLS_LANG to prevent proper conversion and your data appears to be okay when you use utilties like SQL*PLUS to view your data. When you write applications that don't rely on the NLS_LANG like JDBC thin driver for instance you will realize your data is in fact invalid. To learn more about the NLS_LANG you can take a look at this FAQ: http://www.oracle.com/technology/tech/globalization/htdocs/nls_lang%20faq.htm
To migrate your database to a proper character set you can refer to this paper:
http://www.oracle.com/technology/tech/globalization/pdf/mwp.pdf
But please do not ask for help in supporting your current configuration in this forum.

Exporting and Importing of Schema

The Export and Import of Schema is not working consistently in SP4.
When I create a new repository from the schema, all the subtables get created. The main table is has only one field in it. It reads Category.
The other fields in the main table are missing and are not imported during the Import Schema operation.
Has anyone encountered the same issue?
If so, please let me know how you overcame this errorneous behaviour?

Hi Adhappan
I have tried importing without success. The import is not consistent. The same schema creates different sets of tables & fields each time. Sometimes if you reimport some more tables which were not set up the first time gets selected for import.
I did a simple exercise to test the import / export functionality.
1. I unarchived a repository from standard content provided by SAP
2. I exported the schema
3. I tried importing the schema without any modifications to schema
4. The results were highly inconsistent.
Arvind
Pls reward useful answers

Exporting and importing applications/workspaces

I am currently on a testing workspace and want to put the application/workspace to another workspace. I know the export and import commands but my concern is the application import. The application is linked to a sample table caled "Samp" and now I would need to link it to a table called "test". This table is almost eactly the same as "Samp" witht he exeption of 2 or 3 new columns. I am wondering what I need to do to change the link to the new table and whether the application will still work.
Thanks

"419008",
In cases like this, where I know the table name is going to be different across HTML DB instances, what I usually do is create a view on top of the table, and then build my HTML DB applications against the view. Then, assuming the definition of the tables are the same, it should work without further modification.
So in your testing workspace you could have:
create view foo as select * from Samp
and in your other workspace you could have:
create view foo as select * from test
Joel

Exporting and Importing Destination Controls Error

When I export table within destination control and import the table to another Ironport again within destination control I receive error - "Wrong format of the destination config file: ip_sort_pref is required for the global settings."
We are updating the ASYNC on each of our de clustered Ironport. So when one is not in use we need the other to handle all the traffic, including domain controls.
The output displays
[ABCDE.com]
max_host_concurrency = 500
limit_apply = system
limit_type = host
max_messages_per_connection = 50 ......
How can I import this without losing or altering the data within.
^^^^^^^^^^^^^^^^^^^^^^
Solution
We upgrade one of our SMTP ASYNC to 8.0.1 which creates a additional line within default of the upgraded Ironport exported control destination table that is named... wait for it.... ip_sort_pref. Just add it.

The applications and drivers have been imported into the Dev SCCM server however I cannot find the actual content so I am not sure this has worked properly.
When you exported did you choose to "Export all content for selected task sequence and dependencies".
80070003 = The system cannot find the path specified.
See here for exporting and importing task sequences
http://blogs.technet.com/b/inside_osd/archive/2012/01/19/configuration-manager-2012-task-sequence-export-and-import.aspx
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson

Exporting and importing table using R3trans program between 2 clients

Hi,
How to export and import a table between to clients in a same system using R3trans program?
I need to copy a table from Client 020 in a system to client 040 of the same system using R3 trans. I need to know the procedure.
Can any one advice
Regards,
Suresh

This is how you do a export and import of table entries.
Export:
Open Notepad and type the following,
export
client = 020
file = 'clone.export.<sid>.<client no>.data'
select * from <client_dependent_tablename1>
select * from <client_dependent_tablename2>
select * from <client_dependent_tablenamen>
Save the file as export.ctl
Run R3trans export.ctl
and the data of these files will be stored in a file called clone.export.<sid>.data in the directory from which you have called R3trans
Import:
Open Notepad,
import
client = 040
file = clone.export.<sid>.<client no>.data
buffersync = yes
Save the file as import.ctl
Run R3trans import.ctl
Cheers!
Bidwan
Message was edited by:
Bidwan Baruah

Online export and import in DS6

Similar Messages

Maybe you are looking for