Only displays apple logo, only displays that when plugged in.

When plugged in my iPod touch 3gen only displays the Apple logo. When not plugged in it does not turn on.
I have tried the reset method of holding the home and lock button.  When pluged in the logo dissapears and comes back,  when not plugged in the screen flash black for a second.

Next try the remaining actions of:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar       

Similar Messages

  • IPod 4th Gen stuck on Apple logo & empty battery sign when plugged in?

    PLEASE HELP! My iPod Touch is water damaged, so I cannot take it to the Apple store (2 hours away anyways), & I don't have any money at the moment to buy a new one. When I charge it to every power source I have, it will start on the empty battery sign, then switch to the Apple logo, then it goes blank & repeats. Please help me, my iPod is my life 

    After you are sure the iPod is dry.
    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       
    Apple will exchange your iPod for a refurbished one for $199 for a 64 GB one and $99 for the others.

  • My phone stuck on the log in screen and the only thing apears the apple logo why is that happening?

    my phone stuck on the log in screen and the only thing apears the apple logo why is that happening?

    First try a Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least Ten seconds... (But can take Longer)... until the Apple logo appears. Release the Buttons
    If no joy... Try a Restore...
    1: Connect the device to Your computer and open iTunes.
    2: If the device appears in iTunes, select and click Restore on the Summary pane.
    3: If the device doesn't appear in iTunes, try using the Steps in this article to force the device into Recovery Mode.
    From Here
    http://support.apple.com/kb/TS3281
    Make sure you have the Latest Version of iTunes (v11) Installed on your computer
    iTunes free download from www.itunes.com/download
    Note on Recovery Mode.
    You may need to try this More than Once... Be sure to Follow ALL the Steps...

  • HT201263 I Have an iPhone 5 runnig ios 7.0.4. It wont start as the apple logo keeps on blinking when i connect to wall charger or itunes. I even tried to restore it but an error 21 is being displayed. Any one can help me in this situation

    I Have an iPhone 5 runnig ios 7.0.4. It wont start as the apple logo keeps on blinking when i connect to wall charger or itunes. I even tried to restore it but an error 21 is being displayed. Any one can help me in this situation

    Read http://support.apple.com/kb/ts3694#

  • My iphone4 got wet and was working right after but I shut off and have in bowl of rice by dehumidifier. But now it only turns on when plugged in. If I take to an Apple store will they be able to tell me if it's salvageable ?

    My iphone4 got wet and was working right after but I shut off and have in bowl of rice by dehumidifier. But now it only turns on when plugged in. If I take to an Apple store will they be able to tell me if it's salvageable ?

    Apple will not attempt to salvage it. They will offer you a replacement iPhone 4 for $149.

  • My iPhone will not charge and will only turn on when plugged into adapter.

    I have tried to reset and nothing. It turns off if I unplug it and will only turn on when plugged in. The charge has not moved above 19% even though I let it charge for 3 hours while I was out. What do I do?

    http://support.apple.com/kb/TS2802

  • HT4972 hi. my iphone 3gs was stuck on apple logo, does not charging. when i replace the battery, it works, my promblem not is, in can't or won't read the simcard. i cant activate my phone. even i put att simcard. how can i activate it? please help me. tha

    hi. my iphone 3gs was stuck on apple logo, does not charging. when i replace the battery, it works, my promblem not is, in can't or won't read the simcard. i cant activate my phone. even i put att simcard. how can i activate it? please help me. thanks.

    Apple recommends backing up the data when you're getting the battery replaced by them. So I assume that you will likely lose the data during this process.
    Will the data on my iPhone be preserved?
    No, during the service process all data on your iPhone will be erased. Before obtaining service, it is important to back up your data using iCloud or iTunes. Apple is not responsible for the loss of information while servicing your iPhone and does not offer any data transfer service. During service, Apple may exchange your iPhone with an iPhone that is new or equivalent to new in performance and reliability.
    Following service, your iPhone may have a newer operating system (iOS) version and you will need torestore your data using the method used to back it up (iCloud or iTunes). As a result, you may also need to update your App Store applications to ensure compatibility with the newer iOS. If you experience a problem with an application purchased from the App Store, check to see if an update is available or contact the application vendor directly.
    copied from Apple - Support - Service Answer Center

  • HT201363 Dear, Apple Support  it says that when i am getting the credit card details on my iPhone 5s.....it always says that when i click continue please contact iTunes support to complete this transaction!!

    Dear, Apple Support  it says that when i am getting the credit card details on my iPhone 5s.....it always says that when i click continue please contact iTunes support to complete this transaction!!

    Use the link below to contact iTunes support.
    https://ssl.apple.com/emea/support/itunes/contact.html

  • I had erased all contents and settings of my iphone 3G,it had stucked on apple logo,I found that it needed to be restored,i tried to restore  but each time i try to restore,error 1015 occurs,I tried all solns in support page ?

    i had erased all contents and settings of my iphone 3G,it had stucked on apple logo,I found that it needed to be restored,i tried to restore  but each time i try to restore,error 1015 occurs,I tried all solns in support page ?

    punknotdead11 wrote:
    what if my iphone isn't  jailbroken/hacked?
    Then you will not get error 1015, the error will be some other number.
    http://support.apple.com/kb/TS3694#1015

  • Only turns on when plugged in

    i pod touch only turns on when plugged in and when you go turn it off the volume goes to the limit then you get to swipe for power off

    I have the same problem. And my battery is %61 healthy. Today it started to shut down automatically when I unplug the powercord. I don't know what to do. I tried everything like PRAM, PMU etc. But no change. The battery is now fully charged. But whenever it is unplugged from the powercord it shuts down. Please help!

  • IPhone 4S only powers on when plugged into a wall charger, stuck in bootloop

    Today I went to get my phone's screen fixed. At first, the problem was that the phone was rebooting every 3-4 minutes. Then, after it died, it doesn't power on anymore, except when it is plugged into a wall charger. However, it is stuck in a bootloop, where it shows the apple logo for about 7 seconds, then the screen goes black for about 5 seconds, then repeats. I can't unplug it or else the phone goes dead, and plugging it into my computer results in the same deadness. I've tried DFU Mode, Recovery and everything else when plugged into my computer, but it remains dead and black screened. The phone is not picked up at all, it doesn't power on or anything. It only powers on when it is wall charged, but it will bootloop. I can't get past this, and there is no way I can restore it. Help?

    Your battery is dead. You will have to replace it see article:
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIs and corrosion.
    Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    After at least 30 minutes, if:
    The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
    The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
    Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
    If the display turns on, go to step 4.
    If the display remains black, go to next step.
    Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.

  • My ipod nano 6th gen will only turn on when plugged into a power source.

    My ipod nano 6th gen ONLY turns on when it is plugged into a power source. As soon as I unplug it, it turns off. I also tried to reset it and it did not help. Any suggestions? 

    Howdy mela1223,
    If I understand correctly your iPod will not stay on unless you have the charger plugged in even after resetting it. Normally this would indicate a hardware issue that would need a repair but to cover all the bases before that, the last troubleshooting that can be done for it would be to restore it with iTunes on a computer. 
    Restoring iPod to factory settings - Apple Support
    How to restore iPod
    Verify that you have an active Internet connection, because you may need to download new versions of the iTunes and iPod Software.
    Download and install the latest version of iTunes if necessary.
    Open iTunes. Connect your iPod to your computer using the USB or FireWire cable that came with your iPod.
    After a few moments, your iPod will appear in the Source panel in iTunes.
    Select your iPod in the Source panel. You will see information about your iPod appear in the Summary tab of the main iTunes window.
    Click Restore.
    If you are using a Mac, you will be asked to enter an administrator’s name and password.
    A progress bar will appear on the computer screen, indicating that stage one of the restore process has begun. When this stage is done, iTunes will present one of two messages with instructions specific to the iPod model you are restoring.
    Disconnect iPod and connect it to iPod Power Adapter (typically applies to older iPod models).
    Leave iPod connected to computer to complete restore (typically applies newer iPod models).
    During stage two of the restore process, the iPod displays an Apple logo as well as a progress bar at the bottom of the display. It is critical that the iPod remain connected to the computer or iPod power adapter during this stage. 
    Note: The progress bar may be difficult to see, because the backlight on the iPod display may be off.
    After stage two of the restore process is complete, the iTunes Setup Assistant window will appear. It will ask you to name your iPod and choose your syncing preferences, as it did when you connected your iPod for the first time.
    Thank you for using Apple Support Communities.
    Take care,
    Sterling

  • How can I stop the display dimming when plugged into a powersupply. Cannot read playlist in car using music player.

    My new ipod seems to dim after a short time, even when plugged into a power supply, unlike my previous ipod, which used to stay illuminated
    when plugged into the car stereo and external power
    Now in order to see the playlist I have to swipe or touch the home button, using the music player. However using  a GPS app, the screen stays
    fully illuminated......as it should!
    Is this normal now for playing music?
    Also, the new grey on white menu display for music is very hard to read in the car in bright daylight.......unlke the old white on black. Nothing I
    can do about that sadly except complain to apple directly :-(

    Hi Diavonex. Yes I was aware of this option.
    Subsequently I have done a litle research and downloaded a music app called "Track 8" which has a much clearer interface (larger type) and the abillity to change the background colour to dark or light.
    This is much more readable in the car in bright light, and much better at night too.
    You can also turn off auto-lock within the application, which is great, as it doesn't affect other apps.
    Although this app is really only an interface sitting on top of the music app, it offers a much better experience
    in my opinion that the stock player which seems to have devolved rather than evolved.

  • HT4623 My iphone went died without power cord. When it connected to a power, an Apple logo keep blinking. When I tried to restore it by using Itune. it shows error 21 occurred. how to get my phone work again?

    My iphone stopped working today. It only shows a blinking Apple logo when I connected it to a power. I tried to reboot it, but it didn't work. I followed a online suggestion to reboot by restore data from Itune. But when I did, Itune show a message that says it can't restore my iphone because an error 21 occurred.
    Can anyone help me get my phone work again?

    Hi francesyulin,
    If you are having issues restoring your iPhone due to an "error 21", you may find the following articles helpful:
    Apple Support: Resolve iOS update and restore errors in iTunes
    http://support.apple.com/kb/ts1275
    Apple Support: Resolve specific iTunes update and restore errors
    http://support.apple.com/kb/ts3694
    Regards,
    - Brenden

  • TS3694 hello i am not able to switch on i phone 4 apple logo flashes no response when restored

    pls help

    Hi ashwinc79,
    Thanks for visiting Apple Support Communities.
    If you have restored your iPhone but it is not powering on or starting up past the Apple logo, I recommend going through these steps:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIs and corrosion.
    Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    After at least 30 minutes, if:
    The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
    The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
    Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
    If the display turns on, go to step 4.
    If the display remains black, go to next step.
    Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
    Best,
    Jeremy

Maybe you are looking for

  • How can I access the values in ProfileArray of a CWIMAQProfileReport?

    Hi all, I'm not sure if this is the right board, but I didn't find one related to VB and NI Vision. I'm using LineProfile2 from CWIMAQVision1 which gives me a ProfileArray which is a variant. I'd like to access the values in the array. Normally I wou

  • Adobe Flex - Sort

    Hi All, We are using Adobe Flex 2 to develop internet applications. My question is how to lock initial mutiple rows in Flex. Right now, locked row feature is locking the chrome but not the data. Therefore, when we sort new data appear in the locked r

  • ICal works in test user mode but only a spinning disc in original

    I have reinstalled but it still only works in under my created test user. Since the application works, how do I clean out the problem in my user account? Thanks

  • I keep gettin this error message when i try to compile can't fix

    MY CODE import java.text.DecimalFormat; public class MotelBase{ private int nite; private int numadult; private int numchild; final double ADULT_RATE = 25.0; final double CHILD_RATE = 8.0; public MotelBase (int inNite, int inNumAdult, int inNumChild)

  • Can no longer view video in Premiere Pro CC 2014

    I am running a Mac 10.8.5. Video files (various formats:mp4, mov, avi, wmv) only play the audio portion of the video when brought into the source monitor or the program monitor. Videos can be made into sequences and exported, but even they don't show