Only the trackball works!

And the trackball click feature doesn't work either.
I can only scroll around with the trackball, but I can't use the trackball as a button. My blackberry can recieve calls and messages. The screen becomes activated when plugged into the charger or by recieving a calls/emails. BUT, once the screen is visable I can still only scroll through the icons that are visable using the trackball, and I cannot use the trackball to click, or any other keys on the phone. I cannot use the power button, the call button, the sleep button or any other key on the phone.
This happened to me a while back when I had some water damage, I ended up sending the phone in and paying an insurance fee etc..
This time the phone did not recieve any water damage...
I tried taking out the battery..arghh, any other tips, or ways of reseting the phone would be great..
Merry christmas..

Ok well you can try hard reseting your phone..thats menu>options>security options>general settings> press menu key click wipe handheld..
Dont forget to backup your contacts with BB desktop manager first... Plug phone into computer when you get it installed and click on back up and restore then click back up.. save copy to your desktop .. then after hard wipe click on backup and restore again but this time select the file you saved to your desktop and load them back to your phone...
Please remember to resolve your thread.
Put the check mark in the green box that contained your answer! Thanks

Similar Messages

When i upload a video only the audio works

I am uploading a video bumper into Imove and when I do only the audio works and I lose the video. Any suggestions.

format: H.264, 1920 x 1080, millions AAC, 2 challenls, 4800 HZ
FPS: 29.97
Data Size: 4.9 MB
Data Range: 2,985.31 kbit/s
Current Size 1264 x 711 pixels

IPod Touch 4G : " Only the Homebutton works"

hi everybody...i just got my new ipod touch 4g since christmas and everything was fine until now...now at once only the homebutton works...the standbybutton and the two volumebuttons are not working anymore...and i really dont know what to do...please help me.
thank you in advance.

resetting won't work since the sleep button is not working.
I have the same issue.
I've tried resetting my iPod (Settings>General>Reset>Reset All Settings)
but it still won't work.
I'm not sure if it's hardware or software,
but this issue started after I updated my iPod to 4.2.1.
So yeah, I think I have to have it serviced.

Only the browser works

I'm posting this in hopes it will help the next person who has the same problem.
A friend of mine was setting up a new Mac and encountered a weird problem. Surfing the Internet worked (both Safari & Firefox), but 3rd-party applictions such as VersionTracker Pro and Adobe Reader would get errors saying they could not connect to the Internet. After checking many, many dead ends, it was discovered that the computer had its date set to the year 2037. The only clue to the problem was that upon running iTunes, it came up and said it could not connect to the Internet but also said to check the date on the computer.
I must say the Applecare dropped the ball on this one. They had been called but basically said it must be a problem with the 3rd-party apps. That might be an understandable answer in some circumstances, but when the computer is newly set up and a well-known application like Adobe Reader can't access the Internet that is otherwise clearly working, it really is not reasonable for Applecare to dismiss the matter.
Mac OS X (10.4.8)
Mac OS X (10.4.8)

Well, I didn't write out every little thing that happened, but my friend had set the date correctly and somehow it got corrupted. Maybe the internal battery failed, or maybe some software update screwed it up, but it was not due to user error. This is a long-time Mac user, so it's not like he would have accidentally set it wrong, and certainly not to 2037.
But still I assert that Apple has a responsibility to help when a brand new system exhibits such an obviously unexpected problem. Just because the user only noticed the problem in 3rd-party apps does not mean the problem can't be found in other Apple-supplied apps (like happened here.) And maybe Applecare should have a checklist of things to ask people who set up new computers with problems, one being "Is the date set correctly?"
Lastly, I don't think problem is that these application are date sensitive. It seems more likely some of the underlying network access routines are sensitive. Maybe TCP/IP worked with the bad date but these apps are using UDP. Since iTunes gave the same type of error as the 3rd-party apps (can't connect to Internet) it seems more likely to me that some network interface failed that happens not to be used for basic HTTP access.

CS3 Illustrator is what I am using. I cannot seem to select just the artwork to export to JPG or PNG. When I do, it exports the entire work space. I just want the art work saved to a jpg. What are the instruction sets to convert only the art work obje

Can someone tell me how to export my art work object to a PNG or JPG? I am getting the whole work space saved when I export. I want to export a label to another print program and the entire workspace is in the JPG including not just the art I want, but anything else that is on the work space. How can I isolate just the object I want to export and convert it?Newsgroup_User

Randy,
You may create a rectangle the size of the artwork and Object>Crop Area>Make, then Save for Web.
Or you may use the Crop Area Tool, see the documentation or here,
http://designertoday.com/Tutorials/Illustrator/4822/Using.the.Crop.Tool.Illustrator.CS3.Tu torial.aspx

My mac starts ok and then only the mouse works. None of the apps will respond to anything. Can anyone help?

Hi my mac starts ok and the mouse works but none of the apps respond. Can anyone help?

Hello Thorpec
Try out the steps in the article below to troubleshoot issues with your Mac and is also good for performance issues.
Resolve startup issues and perform disk maintenance with Disk Utility and fsck
http://support.apple.com/kb/ts1417
Regards,
-Norm G.

HT201343 mirroring works through my phone but only the sound works from my mac. It has worked before but now suddenly it doesn't

I can only get the sound going when mirroring through my macbook. it worked before but now suddenly only sound comes through. There's no problem mirroring my iphone or my ipad. then i get sound and picture. it must be a setting. what have i done and how do i sort it out?
when mirroring the screen just goes black.

I am having a similar problem, that has just started recently. I am on OS 10.5.8 with all security updates run. My Mail account is an IMAP account. When I check my mail through webmail on Safari, my new messages show up immediately. However, Mail does not show them. Clicking the "check mail" button does not bring them in. I have to quit Mail and re-start it, then the messages show.
I tried to implement Ernie's solution of turning off "Use IDLE". That command is ticked in my preferences, however it is greyed out and I can't change it. Why is that? If it helps, my IMAP path prefix is blank, I'm using port 133, and "use SSL" is not ticked. These are all default settings that I have used successfully for years and haven't fiddled with.

My trackpad won't move the mouse, only the clicks work, happen after updating. Help!, My trackpad won't move the mouse, only the clicks work, happen after updating. Help!

I just update using the app store on my mid 2012 MacBook Pro, and my trackpad wouldn't work, it won't move the mouse but it would still click, I'm using a extrenal mouse at the moment. It really hard carrying your mouse and computer around. Can someone please help me? I also try restting Pram and Scm but it did nothing.

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up guest users” (without the quotes) in the search box. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
When you see the gray Apple logo, release the shift key.
If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
*Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode.
Test while in safe mode. Same problem?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

HT201401 how do i get the camera lens to open i have instagram and camera on my phone and only the instagram works s this right?

having trouble with my iphone camera. I have instagram and camera on the phone. the instagram is working fine but camera lens wont open when i go to use it.

Nastyassink-
Apple's Camera Connection Kit includes both an SD adapter and a USB adapter. You can use an SD card or an adapted Mini SD card with the SD adapter. You can use a USB thumb drive with the USB adapter, as well as a USB adapter for other cards such as Compact Flash. (Some card adapters draw too much current and require a powered USB hub to work.)
It is required that the camera card or thumb drive be formatted as MS-DOS FAT, just as if it had been formatted in a camera. Photos and videos must be in a folder named DCIM, and have names consisting of 8 characters plus suffix, just as they would have been named in a camera.
Some video formats are not compatible with the iPad video player and must be converted on your computer. (The iPad can read M4V, MP4 and some MOV files.)
Fred

When i download a video from camera roll onto my pc only the sound works but no picture

ive transfered plenty of videos from my camera roll onto my pc with no problem.but once i download them into a file there is no thumb picture and when i try playing on vlc,real player,quicktime i get no picture only sound.the only one what i can play on is itunes but thats jumpy picture any ideas?am thinking this happened after i updated my iphone?

Hello Paz5glenda,
Thank you for using Apple Support Communities.
For more information, take a look at:
iOS: Troubleshooting AirPlay and AirPlay Mirroring
http://support.apple.com/kb/TS4215?viewlocale=nl_nl&locale=nl_nl
Try these steps first
Verify that your iOS device's software is up to date.
Verify your Apple TV's software is up to date.
Have a nice day,
Mario

Only the mouse works!

ARD has been working just fine until now!
I can log on to my server, open folders, delete files etc however:
I cannot start any applications by either double clicking or right mouse press-open ing
I cannot close the folders that are open in finder by either pressing Apple or by clicking the close window button - i can however move the window around
I can press Apple Delete to delete a file but when i try and type in the administrator password it changes the file name to what i am typing.
I can access other servers through ARD here at home and there all fine.
Any ideas all?
Thanks for your time
W

Thanks for the reply Dave.
I dont think its worked but heres what i did:
1) VPN'd in via PPTP.
2) Started Terminal and typed:
ssh [email protected]
3) It asked me for a password so i typed the relevant admin password.
4) It logs in telling me the last login date and now displays "server:~ adminname$" in the Terminal window.
5) I enter:
sudo System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Resources/ki ckstart -restart -agent
It displays:
Starting...
Stopped RFB Register MDNS
Done.
server:~ adminname$
6) i type "exit", it tells me the connection to xxx is closed.
7) i quit terminal, log out from VPN and restart ARD to try and access it.
The server is saying Current Status - Offline and LOM status Not Configured.
Any other ideas?
Cheers
W

TS1538 I have two devices on my i tunes, then I change computer and only one of the devices works.

Hi can anyone give me some advice
I had a nano and a classic i pod sync to myk- i tunes page. These worked fine.
I then changed computers and only the nano works. I have authorised the new computer.
The classic is on the page which says 'manage my devices' but it is not responding to anything. There i an option to remove it can you help me enable both i pods to work? The is also a faded date of the 13th Dec. 2012 which is when I downloaded the i tunes to the new computer.
Hope you can help.

Settings>iCloud>Storage and Backup>Manage Storage. Select the phone that doesn't say "this phone" then scroll down and choose Delete Backup

I have an optical mouse that came with my Mac Pro plugged into the USB port on the keyboard. After a year of working normally, the trackball all of a sudden stopped scrolling down. It scrolls up just fine, but not down. Any thoughts?

I have an optical mouse that came with my Mac Pro, the only thing plugged into the USB port on the keyboard. After a year of working normally, the trackball all of a sudden stopped scrolling down. It scrolls up just fine, but not down. Any thoughts?

Well
I tried all of the suggestions, sort of. I did not have alcohol wipes, but I did take alcohol and pour some ona white paper towel and then rolled the mouse touch ball aroound and that finally cleared up the problem. Just inverting it on paper did not do the reick, it needed some help with the alcohol. Of course the probelm is the debris that gets inside and it really needs to come out.
This is a huge problem for RIM devices users too.

The touch on my iphone 3gs does not work. the only time it works is when i slide it to turn it off. I've tried resetting it multiple times and it will still not work. I need help!

Hello, I've got a question about my Iphone 3gs. Well one day i woke up and i tried to slide to unlock my phone but the touch was unresponsive. So, i turned off my phone and back on, the unlock screen came back one and same problem happened. The only time the touch works is when I slide to turn off my phone. When people call me, i can't answer. When people text me, I can't answer. I do have the latest update for the phone. I've looked everywhere on the internet and have got no answers. I have dropped my phone a couple of times and it does have some cracks on the screen. Please help!

Your only chance besides getting it serviced would be setting it up as new device:
http://support.apple.com/kb/HT4137

Mid 2011 Macbook Air - Yosemite keyboard and trackpad stopped working, the only button that worked was the power button, only one USB port works.

I have a Mid 2011 Macbook Air.
Upgraded to Yosemite last week.
Three days ago I was using my Macbook Air for the first time since upgrading to Yosemite. I had been using my Macbook Air for approximately 30 minutes, I was using safari and the keyboard and trackpad stopped working (would not respond). The only button that worked was the power button.
I rebooted and they were still not working. I plugged in a USB mouse and external USB keyboard, only one USB port would work (the Left USB port if looking at the screen) so I had to swap between keyboard and mouse.
After logging in there is a bluetooth icon at the top of the screen with a sawtooth line through it. Bluetooth is unavailable and the bluetooth icon is missing from the system preferences menu.
If I run a hardware test by holding D (on USB keyboard) at startup it says that no problems are found and at the conclusion of the test the keyboard and trackpad start working again. When I log on the bluetooth is working again.
I shut down the Macbook Air and when I started it again the keyboard and trackpad and right side USB ports were all not working again. I logged in using the USB keyboard and mouse and the bluetooth not available sawtooth icon had returned.
I ran the hardware test again and at the conclusion of the test the trackpad and keyboard started working again.
I have tried deleting com.apple.Bluetooth.plist and com.apple.Bluetooth.plist.lockfile from /Library/Preferences/ and tried resetting SMC and Power Functions but this did not fix the issue. The only thing that seems to work is running a hardware test - obviously I don't want to do this every time I use the computer.
I do not believe any hardware is faulty/damaged - I think it has something to do with bluetooth/Yosemite.
I do not have the Macbook with me at the moment, if you have suggestions that I can try or additional checks/info you require please let me know and I can get back to you.
Thanks,
John

Hi!
I have exactly the same problem, and I can't find any solution.
I can't even track down the root of the problem: the Bluetooth/Wifi module? The trackpad? The keyboard/top case? The logicboard?
I've tried all the usual: SMC/PRAM reset, clean install, kext cache clearing.
Any suggestion is greatly appreciated!

Only the trackball works!

Similar Messages

Maybe you are looking for