OOF not working for mailboxes homed on Exchange 2010 server during migration

Hi There
I'm troubleshooting an issue during a exchange 2010 to exchange 2013 migration where the OOF is not working for users homed on the exchange 2010 mailbox servers. This applies to users using outlook 2010 and outlook 2013 .OWA works perfectly and you can also
enable OOF via exchange powershell.
Users homed on the exchange 2013 servers does not have any issues.
The exchange 2010 servers is on SP3 rollup 4 and the 2013 servers on SP1 only without any rollups installed.
So my question will be - have anyone experienced this issue during migration and will patching the exchange 2010 servers to rollup 5 or 6 and the exchange 2013 to sp1 rollup 5 fix the OOF issue then? If requested the client to patch to these levels, but
in the meantime I'm checking if anyone else had similar issues.
Any pointers will be welcome.

Hi ,
1.Please check the problematic exchange 2010 user account can able to access the ews virtual directory internal url and you can check that via browser's.It will prompt for the user name and password , please provide that .
EWS url wopuld be like - https://mail.youdomain.com/EWS/Exchange.asmx
2.Then the second step would be autodiscover check for the problematic user account.you can find that via test email configuration .There you came to know whether outlook is fetching up the proper url for ews and autodiscover.
3.Then please un check the proxy settings in browsers and check the same.
4.please use the command to check the auto discover
test-outlookwebservices
Please check the below links also.
http://exchangeserverpro.com/exchange-2013-test-outlook-web-service/
http://www.proexchange.be/blogs/exchange2007/archive/2009/07/14/your-out-of-office-settings-cannot-be-displayed-because-the-server-is-currently-unavailable-try-again-later.aspx
http://port25guy.com/2013/07/20/user-cannot-set-an-out-of-office-in-exchange-20102013-or-eventid-3004-appears-in-your-event-log/
http://www.theemailadmin.com/2010/06/exchange-server-2010-out-of-office/
Regards
S.Nithyanandham
Thanks S.Nithyanandham

Similar Messages

Active Sync Not Working for NEXUS MOBILE in Exchange 2010 SP3 Enivironment..

HI Exchange Techy's.
We have Exchange 2010 SP3 Servers. Now All mobiles are working fine Through Active Sync Except Google Nexus.
Problem: Account has been activated successfully in Mobile, But Mails are not synchronized.
Kindly help fix me out of this problem.
We are welcome & Appreciate who are giving Comments & Solutions for this problem.
Regards,
One of your Exchange Person
B@[email protected]

Hi,
I'd recommend asking your question over here:
https://social.technet.microsoft.com/Forums/en-us/home?forum=exchangesvrmobilitylegacy&filter=alltypes&sort=lastpostdesc
This forum is meant for feedback on the TechNet website/subscriptions, not product support.
Good luck.
Don't retire TechNet! -
(Don't give up yet - 13,085+ strong and growing)

Exchange 2013 OOF not working for migrated accounts

We are having a problem with the Out of Office responses in Exchange 2013.
We are getting the error “Your automatic reply settings cannot be displayed because the server is currently unavailable.
Try again later.” I have been through several help articles that I found on the internet and so far none have resolved the problem.
Autodiscover is working as expected when connecting an Outlook client – and I can access the url identified by the “Test Email AutoConfiguration” tool for OOF – it returns the xml document as expected. New accounts created in this domain work, but the
problem occurs accounts that were migrated from Server 2003 domain running Exchange 2007. I can also access the OOF settings for a migrated account using OWA. The new domain is 2012 and Exchange 2013 and accounts are being migrated using ADMT through a trust,
which is working as expected. Only the accounts have been migrated (not mailboxes) and I am not planning to connect the old exchange to the new to do mailbox moves – instead I am just planning to export psts from the old Exchange 2007 server
and then import them to the 2013 server. The client dns settings are correct and all other connectivity seems fine.
Any ideas are greatly appreciated. I have also tried creating a new Outlook profile, turning off Cached Mode, and creating an entirely new Windows profile and Outlook profile.
I have also tried using Outlook 2007, Outlook 2010 and Outlook 2013.

I solved this - EWS was disabled for the mailbox. Set-CASMailbox -Identity User -EWSEnabled $true fixed the problem.

Safari 5.05 does not work with OWA access to Exchange 2010

When I connect to my work OWA for access to MS Exchange e-mails I can authenticate but then 9 times out of 10 Safari goes into a loop of loading and re-authenticating from which it never recovers. Occasionally the page loads normally and operates without any problems but this is rare.
The inbox homepage page eventually loads but with errors and is not usable, re-loading normally causes the same loop of trying to load the main inbox page then back to authentication and around again.
Safari has a "reader" icon in the address bar which seems odd to me but otherwise all appears normal.
I have tried clearing the cache, removing cookies, reseting safari etc but nothing seems to clear the issue. I also have firefox for mac which has a similar issue with loading the site however, PC based users using IE have no such issues connecting?
Any ideas?
Thanks

PC based users using IE have no such issues connecting?
You are trying to access MS Exchange web based email whose priority is most likely IE (Microsoft), not Safari or Firefox.
Information for Safari reader here. http://www.apple.com/safari/whats-new.html
You can try this...
From your Safari menu bar click Safari / Preferences then select the Advanced tab. Select: Show Develop menu in menu bar
Now click Develop from the menu then click User Agent. Try IE 8. Then try accessing MS Exchange.
No guarantees...

TREX not working for e-recruiting with HTTP content server

We have a separate e-recruiting instance where we have only e-recruiting functionality installed. In this system we are using Storate type as "http content server instead of standard setting "SAP system database" for HR_KW content repository via transaction code "OAC0"
Following are the details
Document Area: HR_KW
Storage type : HTTP Content Server
Version no. 0046 Content Server version 4.6
HTTP server vd24cs02.sce.com
Port Number 8080 SSL Port Number
HTTP Script archive
Phys. path /usr/sap/N09/SYS/global/
Points to be noted:
1) TREX Search functionality for Job postings etc is not
working with this setting, however if we use HR_KW_CONT (storage type=03 SAP System database) , above mentioned functionalities work. We observed that xml files required for TREX search are also not getting created when we change the settings.
2) We observed that when we change the storage type the indexing job is successful but application log shows some failures in reading/modifying xml files
Please let me know what are the settings/ procedure to use a different storage type instead of standard setting delivered with the product. Anything related to the setting for above requirement

Hi All,
I may have a similary problem but I'm not entirely sure.
I have been tasked with setting up a simple java servlet to authenticate against a BOXI (Business Objects) server, from my tomcat server (tomcat 5.5) on my windows XP desk top machine. I will add more info on this shortly.
I have been supplied with a krb5.ini file and the bscLogin.conf file as follows:
bscLogin.conf :
com.businessobjects.security.jgss.initiate {
com.sun.security.auth.module.Krb5LoginModule required debug=true;
krb5.ini[libdefaults]
default_realm = ADF.SOMEWHERE.CO.UK
dns_lookup_kdc = true
dns_lookup_realm = true
default_tgs_enctypes = rc4-hmac
default_tkt_enctypes = rc4-hmac
[realms]
ADF.SOMEWHERE.CO.UK = {
kdc = DC90.ADF.SOMEWHERE.CO.UK
default_domain = ADF.SOMEWHERE.CO.UK

OUTLOOK 2013 permission shared calendar Free/Busy doesn't work for some the users Exchange 2010 and Exchange 2003 that use outlook 2007/2010

Hello,
We are in coexitence organisation (transition Migration) Exchange 2003 sp2 and Exchange 2010 sp1.
Users in Exchange 2003 use outlook 2007 and outlook 2010
Users in Exchange 2010 use outlook 2007, outlook 2010 and outlook 2013.
Issue: users in Exchange 2003 can't open outlook 2013 user calendar when he has Busy/Free information as default permission in his calendar.
User in Exchange 2010 with outlook 2007 can't also open outlook 2013 user calendar when he has Busy/Free information as default permission in his calendar.
Is it normal ? or exist some configurations to do in order to coexist all thoses clients and servers ?
Thanks in advance

Hi,
Does this issue occur on Outlook only or both Outlook and OWA?
Since you have double checked the permissions via multiple methods, it seems there is nothing problem on permission. Please make sure the migration from Exchange 2003 server completed successfully.
If in OWA everything goes well (cannot see details), it should be an issue on the Outlook client side.
I suggest run Outlook under safe mode to avoid some AVs and add-ins.
I suggest re-create profile to refresh the caches.
Thanks
Mavis
Mavis Huang
TechNet Community Support

Exchange 2010 - Moving mailbox database from exchange 2010 server to another exchange 2010 server

Hi,
I have a current existing exchange server running on 2008 R2. apparently the partition that holds the mailbox database is getting full and i need to move some user mailboxes to another environment ( exchange 2010 running on 2008 R2). i transferred some users
successfully to the new location, but am not able to transfer the rest. I am getting the errors:
Summary: 1 item(s). 0 succeeded, 1 failed.
Elapsed time: 00:00:00
Erastus XXXXX
Failed
Error:
The queue in 'MBX2010_STAFF' database already contains a move request for 'Erastus XXXXX', while AD reports the mailbox as not being moved. It is possible that someone created this move request recently, while targeting a different domain controller, and AD
replication did not yet occur. You can examine this move request by running 'Get-MoveRequestStatistics -MoveRequestQueue 'MBX2010_STAFF' -MailboxGuid f8023bc7-9d65-4194-9f6b-10e4780558b5 -IncludeReport | fl'. If you believe this to be an abandoned move request,
you can remove it by running 'Remove-MoveRequest -MoveRequestQueue 'MBX2010_STAFF' -MailboxGuid f8023bc7-9d65-4194-9f6b-10e4780558b5'.
Exchange Management Shell command attempted:
'xxxxxxxx.co.ke/Training Department/XXXXXXX/XXXXXXX/Erastus XXXXX' | New-MoveRequest -TargetDatabase 'OFFICE_STAFF_MB_DB' -BadItemLimit '0'
Elapsed Time: 00:00:00
AND
Summary: 1 item(s). 0 succeeded, 1 failed.
Elapsed time: 00:00:01
George XXXXX
Failed
Error:
Service 'net.tcp://win-u5bjh2oamaa.xxxxxxxxx.co.ke/Microsoft.Exchange.MailboxReplicationService' encountered an exception. Error: MapiExceptionNoAccess: Unable to open message store. (hr=0x80070005, ec=-2147024891)
Diagnostic context:
    Lid: 18969   EcDoRpcExt2 called [length=207]
    Lid: 27161   EcDoRpcExt2 returned [ec=0x80070005][length=202][latency=0]
    Lid: 32881   StoreEc: 0x80070005
    Lid: 50035
    Lid: 64625   StoreEc: 0x80070005
    Lid: 1494    ---- Remote Context Beg ----
    Lid: 26426   ROP: ropLogon [254]
    Lid: 56503
    Lid: 12716   StoreEc: 0x80070005
    Lid: 20794
    Lid: 28474   StoreEc: 0x80070005
    Lid: 22330   dwParam: 0x0        Msg: 14.01.0270.001:CPLSERVER
    Lid: 1750    ---- Remote Context End ----
    Lid: 23354   StoreEc: 0x80070005
    Lid: 25913
    Lid: 21817   ROP Failure: 0x80070005
    Lid: 26297
    Lid: 16585   StoreEc: 0x80070005
    Lid: 32441
    Lid: 1706    StoreEc: 0x80070005
    Lid: 24761
    Lid: 20665   StoreEc: 0x80070005
    Lid: 25785
    Lid: 29881   StoreEc: 0x80070005
Exception details: MapiExceptionNoAccess (80070005): MapiExceptionNoAccess: Unable to open message store. (hr=0x80070005, ec=-2147024891)
Diagnostic context:
    Lid: 18969   EcDoRpcExt2 called [length=207]
    Lid: 27161   EcDoRpcExt2 returned [ec=0x80070005][length=202][latency=0]
    Lid: 32881   StoreEc: 0x80070005
    Lid: 50035
    Lid: 64625   StoreEc: 0x80070005
    Lid: 1494    ---- Remote Context Beg ----
    Lid: 26426   ROP: ropLogon [254]
    Lid: 56503
    Lid: 12716   StoreEc: 0x80070005
    Lid: 20794
    Lid: 28474   StoreEc: 0x80070005
    Lid: 22330   dwParam: 0x0        Msg: 14.01.0270.001:CPLSERVER
    Lid: 1750    ---- Remote Context End ----
    Lid: 23354   StoreEc: 0x80070005
    Lid: 25913
    Lid: 21817   ROP Failure: 0x80070005
    Lid: 26297
    Lid: 16585   StoreEc: 0x80070005
    Lid: 32441
    Lid: 1706    StoreEc: 0x80070005
    Lid: 24761
    Lid: 20665   StoreEc: 0x80070005
    Lid: 25785
    Lid: 29881   StoreEc: 0x80070005
Exchange Management Shell command attempted:
'xxxxxxxxxx.co.ke/Training Department/xxxxxx/xxxxxxx/George xxxxxxx' | New-MoveRequest -TargetDatabase 'OFFICE_STAFF_MB_DB' -BadItemLimit '0'
Elapsed Time: 00:00:01
I have all the proper rights.
YOUR ASSISTANCE WILL BE HIGHLY APPRECIATED. THANX :)

0x80070005 is pretty standard access denied entries. I would start digging into ACLs on a handful
of mailboxes.
Is there another Admin that can give it a shot to test their permissions vs yours?
- If you find my post to be helpful, or the answer, please mark it appropriately. Thank you.
Chris Ream

Save Set-ADServerSettings permanently and not just for opened session on Exchange 2010

Hi guys!
We useExchange 2010.
If we set: Set-ADServerSettings -PreferredServer desiredDC.DOMAIN.LOCAL and then run: Get-AdServerSettings | fl
We see that changes were commited.
But as soon as we close and reopen Exchange Management shell and run Get-AdServerSettings | fl, it gives us old results.
Any hints how to achieve that Set-ADServerSettings -PreferredServer settings would be permanently saved?
with best regards
bostjanc

Bostjanc, the simplest way I'm sure of that will enforce the change is to add the command to the script at $PROFILE. This is located at C:\Users\<username>\Documents\WindowsPowerShell\Microsoft.PowerShell_profile.ps1 in my Windows 7 system.
In your EMS shell, run "Notepad $PROFILE" and make the change. If you don't currently have a profile script defined there, you'll get the "Cannot find the Microsoft.PowerShell_profile.ps1 file. Do you want to create a new file?" popup,
but from there it should be simple to add the command you want.

Adding a second Exchange 2010 Server to an exsisting site.

We have a working server and I want to load a second Exchange 2010 server and migrate all roles and users to the new server. What if anything do I need to watch when doing this. This first step I want to do is move all users to the new server because we
are running out of space on the old server, and then I will move roles to the new server. then shut the old server down. Again just looking for some good directions to do this.
Thanks,
Dan

Hi,
I agree with DareDevil57. We can add a new Exchange 2010 server and migrate from the old Exchange 2010 to the new Exchange 2010 server. Make sure the new Exchange server works well, then we can decommission the old Exchange 2010 server.
Best regards,
Belinda
Belinda Ma
TechNet Community Support

Can be Sequenced Micrososft Exchange 2010 server?

Hello,
I have a task for creating the APP V package for the Microsoft Exchange server 2010, my question is can be sequence (APP V 4.6) exchange server 2010? if yes what are the challenges we face.
thanks in advance.
Thanks,
Channa

App-V 4.6 is not designed for infrastructure components as Exchange.
Server App-V is but.... "Some large server applications such as Microsoft Exchange Server, Microsoft SQL Server, and Microsoft SharePoint are not supported."
So use the native installation for Microsoft Exchange server 2010.

Out of office replies in Exchange 2013 not working for external recipients

Hi,
Few days ago a couple of company workers went to vacation. They set up OOF automatic replies in OWA 2013. However automatic replies are not working for external recipients (outside of company). Internal users (company users) receive OOF notification.
I'm using smart host in sender connector configuration (SMTP server of internet provider) to deliver emails. Any clues about this problem ? Please find below part of the transaction log. For testing purposes i set up administrator account
to be on vacation.
HARED... SMTP
[email protected]
{[email protected]}             Automatic reply: vacation test
RECEIVE SMTP
[email protected]
{[email protected]}             Automatic reply: vacation test
DROP     ROUTING
[email protected]
{[email protected]}             Automatic reply: vacation test
AGENT... AGENT    [email protected]
{[email protected]}             Automatic reply: vacation test
HARED... SMTP
[email protected]
{[email protected]}             Automatic reply: vacation test
RECEIVE SMTP
[email protected]
{[email protected]}             Automatic reply: vacation test
AGENT... AGENT    [email protected]
{[email protected]}             Automatic reply: vacation test
TRANSFER ROUTING [email protected]
{[email protected]}             Automatic reply: vacation test
FAIL     SMTP
[email protected]
{[email protected]}             Automatic reply: vacation test

Hi Informus,
Please check if it is allowed in AllowedOOFType of the Remote Domain *
In Exchange 2013, the only way to see or change the current configuration for automatic replying and forwarding to the Internet is via the Exchange Management Shell (EMS) with PowerShell commands.
To get the currently configured Remote Domains, use:
Get-RemoteDomain
Name                           DomainName
AllowedOOFType
Default                        *
External
Get-RemoteDomain Default | fl AllowedOOFType, AutoReplyEnabled, AutoForwardEnabled
AllowedOOFType     : External
AutoReplyEnabled   : False
AutoForwardEnabled : False
To change the settings, use the Set-RemoteDomain command.
Enable automatic replies
Set-RemoteDomain -AutoReplyEnabled $true
Enable automatic forwards
Set-RemoteDomain –AutoForwardEnabled $true
Enable OOF for Outlook 2003 and previous (for Exchange 2007 and 2010 support)
Set-RemoteDomain –AllowedOOFType $ExternalLegacy
To change all these properties at once, you can use:
Set-RemoteDomain Default -AutoReplyEnabled $true –AutoForwardEnabled $true –AllowedOOFType $ExternalLegacy
Note:
Valid settings for the AllowedOOFType property are:
External
This is the default and only allows for the new style OOF messages as introduced in Outlook 2007.
ExternalLegacy
This settings allows for both the new style and old style OOF messages and needs to be set if you want to enable external OOF support for Outlook 2003 as well.
None
This setting doesn’t allow for the use of OOF messages at all (both internal and external).
InternalLegacy
This setting only allows for internal OOF messages to be sent for all Outlook versions.
Regards,
Satyajit
Please “Vote As Helpful”
if you find my contribution useful or “Mark As Answer” if it does answer your question. That will encourage me - and others - to take time out to help you.

OOF not working after Exchange 2010 install

I have a Exchange 2007 server environment where I recently installed a new Exchange 2010 server. After installing the 2010 server, my clients are receiving the following error when trying to configure OOF. "Your automatic reply settings
cannot be displayed because the server is currently unavailable. Try again later." I've not moved any mailboxes to the new server, just installed it.
I've done all the tests I can find online and all pass without issue. I'ma able to get to the OOF URL without issue as well.
The 2007 server is on SP 3 rollup 12.

Hi,
The above problem generally occurs because the CAS server uses the credentials that you used to log on to Windows instead of the credentials that you used to log on to the mailbox in Outlook. I recommend you install the hotfix in the following KB to solve
this issue.
"Your Out of Office settings cannot be displayed, because the server is currently unavailable. Try again later" error when you try to open the Out of Office Assistant in Outlook 2010
http://support.microsoft.com/kb/2596516
Hope it helps.
Best regards,
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Amy Wang
TechNet Community Support
Not sure that would be the issue with every machine on the network, plus the user I'm logging in with is the mailbox I need to access so the credentials should be the same.

Outlook autodiscover is not working for some users in coexistence

Hi
We are doing exchnage 2013/2010 coexistence
Most everything is ok BUT outlook autodiscover is not working for some exchange 2010 users now that 2013 is in the front!!!. We end up creating the profiles manually. It has affected some but not all the users.
I followed the instructions here but it didn't help.
http://blogs.technet.com/b/tips_from_the_inside/archive/2012/01/11/autodiscover-fails-for-one-or-more-users.aspx
Using outlook 2010, 2013, patches, .... didn't make a difference
Would you please help?
Thank you

Hi
If it is affecting only few handful of users i could suspect a mailbox corruption and would recommend to move mailbox and see the results.
Also you can try below
You need to set the values MaxFieldLength, MaxRequestBytes & MaxTokenSize to below on Exchange 2010 CAS servers as well as Exchange 2013 CAS servers
Path: HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\HTTP\Parameters
Name: MaxFieldLength
Type: DWORD
Value: 65534
Path: HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\HTTP\Parameters
Name: MaxRequestBytes
Type: DWORD
Value: 16777216
Path: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa\Kerberos\Parameters
Name: MaxTokenSize
Type: REG_DWORD
Value: 48000
Just reboot the servers once its done and you will be good to go.
References
https://social.technet.microsoft.com/Forums/en-US/cc2929ac-4d36-4e84-a567-ce9b3bec1398/http-400-bad-request-on-iis-8-exchange-2013-cu2-on-windows-server-2012-autodiscovery-is-not?forum=exchangesvrgeneral
http://blogs.technet.com/b/kristinw/archive/2013/03/28/recommended-changes-and-enhancements-to-support-exchange-in-an-enterprise-environment-whew.aspx
Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com Thanks Sathish
(MVP)

I have an event in my calendar that was sent by someone who does not work for the company anymore and I am reminded 2 times a week. How can I remove it?

I have an event in my calendar that was sent by someone that does not work for the company anymore and I am reminded 2 times a week. How do I delete it?

Tap on the event to open the event. Click the 'Edit' button in the event bubble, then press the 'Delete Event' button at the bottom of the Edit pop-up. It's a little different for events that come through Microsoft Exchange, you tap the event to bring up bubble and click the 'Details' button, and then press 'Decline' to remove the event.

Auto resolve not working for cached outlook

We recently migrated from Exchange 2007 to 2010. One thing we have noticed is that auto resolve (to alias name) is not working for Outlook in cached mode. Not in cached mode or via owa, it seems to work fine.

Hi,
Does the issue happen to all users or some specific users?
Please check whether the issue happens in Outlook Online mode. If the issue only happens in Cached mode but not in Outlook Online mode, please create a new Outlook profile to have a try.
If it doesn't work, please restart Microsoft Exchange File Distribution service in Exchange 2010 and Exchange 2007 then click Send/Receive > Send/Receive groups > Download Address Book to have a try.
Regards,
Winnie Liang
TechNet Community Support

OOF not working for mailboxes homed on Exchange 2010 server during migration

Similar Messages

Maybe you are looking for