Open an window which direct the URL when clicked on the custom webtab

Hi all,
I was looking-When we click on an New Custom Webtab must Display an new separate window that directs to
the URL that we have given in the Custom Webtab URL section.
Can we do this in Oracle CRM on Demand using some Java Script.
Need your inputs.
Thanks!

No to create a Custom Web Tab please complete the following:
Click Admin -> Application Customisation -> Custom Web Tabs to define the tabs webpages that you would like to display in a seperate tab

Similar Messages

  • I've built a header/nav bar, for a website I'm designing, in Edge Animate but when I click on one of the links it opens the URL in the header/nav bar and not the whole web page? How do I fix this so the links open the URL when click on the whole page?

    I'm designing the website in Adobe Muse, using the .OAM file from Edge Animate. Please help.

    Sounds like you may need to set the target url to _parent
    See reference: HTML a target Attribute
    Darrell

  • How to Get the value when clicking on the link

    I had a problem with when clicking on the link.
    I need get the link value to the controller when clicking on the link.
    I am displaying the database columns in jsp using repeater in links.
    I am displaying the data like this:
    RED
    BLUE
    GREEN
    these are three links.when clicking on the link RED. RED should go to the controller.
    After getting RED to the controller i will get the RED value from the database.

    my requirement is like that only
    I have just given the example of emp and dept
    emp(empno,zone_group_id,zone_id,deptno,ename,emp_p_ind,last_update_datetime);
    dept_emp(empno,dept_no,loc,dname,sal_emp,grade,last_update_datetime);
    CREATE OR REPLACE VIEW emp_zone AS
    SELECT e.empno,
          (select zone_group_id from price_zone_group where rownum = 1) zone_group_id,
           d.loc zone_id,    
           d.grade,  
           d.last_update_datetime,
      FROM dept_emp d
          emp e
    WHERE d.empno=e.empno
       AND e.emp_p_ind = 'Y'
      WITH READ ONLY;
    Now
    my requirement is to get the data of emp_zone view and needs to store those data into some other temp table
    if any of the above base table got updated deleted or inserted then the view last_updatetime also will get updated but problem is why im not using base table
    direct because it is having huge data and it performance issue .i have to get the value on the basis of view only and using some logic

  • Sending an email as part of the process when clicking on the 'Save' Button.

    Would like to learn how to do this:
    Do you have a purchase card () Yes () No
    ~~~~~~~~~~~~~~~~~~~~~~~~~~
    If the user selects 'Yes', I want to send an email as part of the process when the user clicks 'Save'.
    But I also have an item, P2_EmailSent that I would like to flag as being sent, along with the date it was sent, P2_DateEmailSent.
    Then, after a week (check P2_DateEmailSent) from date it was sent, send it again.
    Please let me know if you need more details?

    hi Zahid Khan,
    as said i tried the same.
    i have created a button "send" action :submit.
    and also have created a process"send mail" with the folloing code
    DECLARE
    l_body CLOB;
    BEGIN
    l_body := 'Thank you for your interest in the APEX_MAIL package.'||utl_tcp.crlf||utl_tcp.crlf;
    l_body := l_body ||' Sincerely,'||utl_tcp.crlf;
    l_body := l_body ||' The APEX Dev Team'||utl_tcp.crlf;
    apex_mail.send(
    p_to => '[email protected]',
    p_from => '[email protected]',
    p_body => l_body,
    p_subj => 'APEX_MAIL Package - Plain Text message');
    APEX_MAIL.push_queue;
    END;
    and , Process Success Message as "done" and When Button Pressed (Process After Submit When this Button is Pressed): "SEND" WITH Process Point : "ON SUBMIT AFTER COMPUTATIONS AND VALIDATION"
    The process is running.., getting the """success message""" but unable to""" get the mail""".(tried different combinations of mail ids)
    any help !!!

  • CS3 Crashes Daily and 50% of the time when clicking on the Stroke window

    That pretty much sums up my problem. I'm running InDesign CS3 on a G4 Mac Mini with a 1.42 GHz Processor, 1GB or Ram and OS 10.4.11. Installing the latest updates and doing re-installs isn't doing anything but create long stretches of wasted time. I really need the program to be fully functional in order to continue working. Going back to CS2 is out of the question because I work with a lot of files that are saved in CS3. Any help would be greatly appreciated. Thank you.

    Press Shift + Ctrl + Alt + Cmd just as you launch the application. A dialog will appear asking you to delete the prefs.
    Note it may we worthwhile backing them up prior to doing this, as if you have any presets or Workspaces defined these will be lost when the prefs are deleted.
    Copy the Version 5 folder from users/[username]/Library/Preferences/Adobe InDesign

  • PDF stored in database and to view the PDF when clicking on a link

    Is it possible to save a PDF document in the database as a blob column and to retrieve the PDF when clicking on the link
    Example
    Above method is possible for images
    See: http://www.oracle.com/technology/obe/apex/apex31nf/apex31blob.htm.
    But can I reach the same for PDF documents?
    Thanks in advance for your response.
    Kind regards,
    Iloon

    Hello Andy,
    This Upload and Download Files is very useful feature in APEX.
    However, is there a way of displaying PDF files first in the report by clicking the corresponding link
    in the table?
    I mean, is it possible to view PDF files first by clicking the link before deciding to download them?
    As we see, this approach is used by most websites and after opening and viewing a PDF file, we can save them.
    Thanks.
    Shurick.
    Edited by: Shurick on Sep 28, 2009 12:51 PM

  • Previous version had save all tabs before shutting down,which helped a lot if u open same windows always,but this is not there in the latest version I have upgraded recently.Request you to guide me if this can be accommodated in the new version.

    Previous version had save all tabs before shutting down,which helped a lot if u open same windows always,but this is not there in the latest version I have upgraded recently.Request you to guide me if this can be accommodated in the new version.

    Firefox now always stores the old session which you can access by going to the History menu and selecting "Restore Previous Session".
    If you always open the last set of tabs, an alternative approach is this:
    # Click the orange Firefox button, then select options to open the options window
    # Go to the General panel
    # Change the setting "When Firefox starts" to "Show my windows and tabs from last time"

  • JPGS are set to open in Photoshop Elements, but they open in Windows Photo Viewer instead, even when I specifically select Photoshop (and it's the default app)

    JPGS are set to open in Photoshop Elements, but they open in Windows Photo Viewer instead, even when I specifically select Photoshop (and it's the default app)

    Hi,
    It seems this is a Microsoft related. You are referring on how to set JPG Image in Photoshop Elements by default. You may try visiting Microsoft's Support page http://support.microsoft.com/ for you to get the correct information/help you need.
    Thank you.

  • Yoga 2 11 Windows closes all my programs when I close the lid

    Lenovo Yoga 2 11
    Model 20332
    Windows 8.1 64-bit
    When I close the lid of the tablet/laptop, I expect that Windows will go to sleep and that when I open the computer and login, all of my windows and programs should be open as I had them when I closed the lid. Sometimes, this is the case. But other times, when I open the lid, it's as if I had logged completely out -- no windows are open, and any programs running in the notification area (e.g. Bittorrent Sync) are no longer running.
    How do I configure this so that my programs are not closed when I close the lid or otherwise make the computer go to sleep?
    My current Windows settings:
    Control Panel > Power Options: Daily Plan
      Turn off the display: On battery: 10 minutes, Plugged in: 30 minutes
      Put the computer to sleep: On battery: 30 minutes, Plugged in: 1 hour
      Allow hybrid sleep: On battery: On, Plugged in: On
      Hibernate after: On battery: 120 Minutes, Plugged in: Never
    Power and sleep buttons and lid settings:
    When I press the power button: On battery: Hibernate, Plugged in: Sleep
    When I press the sleep button: On battery: Sleep, Plugged in: Sleep
    When I close the lid: On battery: Sleep, Plugged in: Sleep

    Did you check the startup setting in Tools > Options > General > Startup: "When Firefox Starts" ?

  • Firefox does not open when clicking on the icon, the firefox.exe process consumes 99 % of the CPU and my computer runs slowly.

    I have been a happy user of Firefox for many years. Around last April first I opened Firefox and was offered an update to v 4.42.0.0 which I accepted. Installation seemingly went well. I forget now exactly what happened but the result has been that ever since April 1 I haven’t been able to open the Firefox browser when clicking on the Firefox icon. My computer now was running very slowly. I tried to uninstall Firefox, but a popup told me I couldn’t because Firefox was in use. This confused me because I couldn’t see it being used. Only now I have found that on Task Manager processes that “firefox.exe” was consuming 99 % of the CPU. After removing firefox.exe by clicking End Process my computer ran better. I uninstalled Firefox I had on my computer and installed Firefox 5.0. Unfortunately I have the same problems: Firefox does not open when clicking on the icon, the firefox.exe process consumes 99 % of the CPU and my computer runs slowly.

    Born2die! Brilliant. I am a desktop clicker and never knew Firefox had a safe mode.
    Thank You!
    I was unable to start in safe mode initially. The second time I disabled all of the Add-Ons and she started up just fine. I enabled them one by one hoping to track down the culprit but the problem seems to have gone away.
    BTW I am running ver. 3.6.8 (in response to cor-el's earlier post) and
    Firefox is in the process of downloading 3.6.10 (which I am starting to think may have been what caused this whole problem to begin with)
    Incidentally, whats up with all of the Java Console Add Ons?
    I have:
    Java Console 6.0.11, Java Console 6.0.13, Java Console 6.0.15
    Java Console 6.0.17, Java Console 6.0.20, and Java Console 6.0.21
    What are they? Do I need them? Can I uninstall them? Is this due to using Open Office?
    Also, .NET Framework 0.0.0 Should I uninstall it?

  • How do I see the URL when I mouse over a link?

    how do I see the URL when I mouse over a link?

    Should show at the bottom of your window if you go to View and click on Show Status Bar.

  • How to restrict "Open Applications" window from showing C drive? Or use the Windows Explorer "Open" Window?

    Hi, Im new to JDeveloper and I work in a school which requires restriction of the C: Drive. Does any one know how I can either stop the "Open Applications" dialog from showing this drive or Use the Windows Explorer "Open" dialog window to browse files, the drive has been hidden and restricted using GPO but JDeveloper shows the C: drive?
    Any help is much appreciated.

    Hi and thanks Timo. We are using 12c. On the Windows side of things, we are using Win7 and we have hidden the drives we don't want the user to see using GPO but obviously Jdev then shows these drives in its "Open Applications" Window and allows access. As far as the environmental variable is concerned this is something that I put in place.
    Many thanks for your reply and the link to the tech doc.
    Nigel

  • I updated my Itunes the other day and now, when clicking on the itunes icon, the program does not open?? I have tried uninstalling and reinstalling, resetting the computer, checking permissions, running as adminstrator.. nothing is working?? Help!!

    I updated my Itunes the other day and now, when clicking on the itunes icon, the program does not open?? I have tried uninstalling and reinstalling, resetting the computer, checking permissions, running as adminstrator.. nothing is working?? Help!!

    Amazing steps you've done so far! The great news is this is very unlikely an issue with your iPhone.
    I've run into a similar issue lately as well. I narrowed it down to one song that was causing 30 songs not to sync. I removed the song from the sync list (unchecked it) and all 29 songs were able to sync.
    You may be running into a similar issue. This may be a problem with this version of iTunes, an issue with one song or a group of songs; hard to know for sure. It's important to narrow down and isolate the cause. Most imporantly get that music back on there!
    The way to narrow down the casue add just a few songs at a time (even 1, just to get that first sync finished). Manually syncing is what you'll need here.
    Plug in your iPhone, on the Summary screen (shows a picture of your iPhone, the iOS version, Restore iPhone....; etc). Under the Options area at the bottom choose to Manually Manage Videos and Music then choose Apply in the lower right. The music that's on your iPhone now should be removed from your iPhone now. You're now able to sync music manually.
    The link below explains how to drag the songs from the iTunes library on the computer on to your iPhone which will start the sync. Add just one song just to see if you can get 1 of those hundreds of songs on there. If you can, awesome! Keep adding until you find the song or group of songs that are causing this issue.
    http://support.apple.com/kb/HT1535
    Please let me know how things are going.
    Cheers!

  • HT1766 I can not open my ipad mini, a message says " cannot back up. This ipad can not back up to icloud without a verified email address. later , settings but neither of the two when clicked can't be opened.pls advise on what to do?

    I can not open my ipad mini, a message says " cannot back up. This ipad can not back up to icloud without a verified email address. later , settings but neither of the two when clicked can't be opened.pls advise on what to do?

    Have you tried a soft-reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider if it appears), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • I have some trouble with Safari!  Everytime i google something, I expect safari to open the link i click in the same window and same tab - as it did before - but now it always opens a new tab! I'm getting really tired of that! So please help me!

    I have some trouble with Safari! 
    Everytime i google something, I expect safari to open the link i click in the same window and same tab - as it did before - but now it always opens a new tab! I'm getting really tired of that! So please help me! I want safari to open the google search link in the same window and tab! How to fix that?
    Please help me!!!
    Thank you!

    From the Safari menu bar, select
    Safari ▹ Preferences ▹ Extensions
    Turn all extensions OFF and test. If the problem is resolved, turn extensions back ON and then disable them one or a few at a time until you find the culprit.

Maybe you are looking for