Open application in LV window

I would like to run an apllication with labview and make it run in a labview
window so I can operate application. For example I want to be able to open
lets say the windows calculater and operate from a distant computer with
remote panel.
Anybody now of any examples ?
Thanks

This won't work. LabVIEW can only transfer its own control images and operate on its own controls through remote panel.
You should better look into solutions like VNC, Windows XP Desktop Remote Control or such.
Rolf K
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

Similar Messages

Open application in new window

I want to have a link on a page which calls the login screen of the application in a new window.
I put the following into my page template
a href="http://ae-pt-03:7778/iworld/intsys01_v6.html" target="_blank">New</a>
When you click on the link it does indeed open a new window and displays the application login screen. I can log in and perform tasks.
However when I go back to the original window and click on any other link it logs me out and I have to login again.
Anyone know how I can open the second window without being logged out in the first. This does not happen if I open a new window session manually from the start menu and type in the application address.
I am using IE7 but IE8 behaves in the same manner.
Edited by: Fintan Stack on Apr 26, 2012 2:36 PM
Edited by: Fintan Stack on Apr 26, 2012 2:37 PM
Edited by: Fintan Stack on Apr 26, 2012 2:41 PM
Edited by: Fintan Stack on Apr 26, 2012 2:42 PM

Fintan Stack wrote:
I want to have a link on a page which calls the login screen of the application in a new window.
I put the following into my page template
When you click on the link it does indeed open a new window and displays the application login screen. I can log in and perform tasks.
However when I go back to the original window and click on any other link it logs me out and I have to login again.
Anyone know how I can open the second window without being logged out in the first. This does not happen if I open a new window session manually from the start menu and type in the application address.
I am using IE7 but IE8 behaves in the same manner.Hi Fintan,
When you are opening a new window are you not passing the current session ID in the url? Which means that you are opening a new window for the same session.
Can you please right click on the link and copy the shortcut/link address and reply that to me.
Thanks

Open application in new window and new session

The problem is if the application is already open and we try to open another application by clicking at the
shortcut, it opens it in a new browser but it does not prompt for the password.
We want the application to prompt for the password each and every time.
we use the following html to launch the application:
<HTML>
<HEAD>
<SCRIPT LANGUAGE="Javascript">
function OpenUrl(url)
PopUp = window.open(url, 'X', height=768,width=1024, LOCATION=no, MENUBAR=no, STATUS=no, TOOLBAR=no,SCROLLBARS=no, RESIZABLE=yes');
window.opener = null
window.close()
return false
win.focus();
</SCRIPT>
</HEAD>
<BODY OnLoad="OpenMyApp('http://.......................')">
</BODY>
</HTML>
I would really appreciate your help.
Kumar

There are several ways to do this.
One way is to create your own custom login screen and send the user to it instead of the application. Once they login, then send them to the desired application.
You'll need two user accounts to do this. The first is to lauch the custom login screen, and the second is to launch your application. To avoid two database logins, write the code in your custom login screen to automatically log them into the second account.
Another way is to create a different user account for each application. You may need to work with your DBA to get the accounts created with the proper permissions so they access only the tables they need.

Some Adobe applications open a empty, white window.

Hello,
since I have the Adobe Creative Cloud desktop app installed on my new Mac (about 1 month ago), it opens an additional empty window on each launch. Since the update to the CC2014 I can observe this behavior in some Adobe applications like Dreamweaver, too. (but not Photoshop)
I chatted with the Adobe and the Apple support, but their solutions had no effect.
What they have tried:
Delete /User/[Username]/Library/Application Support/Adobe/OOBE/opm.db
Rename [Username]/Library/Preferences/Adobe/Adobe Dreamweaver CC 2014 Prefs and [Username]/Library/Application Support/Adobe/Dreamweaver CC 2014
Delete Preferences, LaunchAgents, LaunchDaemons
PRAM Restart
Reset user rights
Uninstall all Adobe Applications, reinstall the latest Mac OS X (10.9.3) Update and install Adobe again
The only thing that has helped was to create a new user. But this is not the right solution. Funnily enough, I had this problem when I installed the CC application for the first time on my Mac. It was one of the first programs on the new OS. Maybe the problem has something to do with my user account, but I had the problem, even under Windows.
Screenshots:
I hope you can help me! Have a great weekend!
Best regards,
Maik

I've read the reference you have done me.
The problem is similar. I've inserted the following row in the processRequest controller:
OAButtonBean oabApriCalcolo = (OAButtonBean)webBean.findChildRecursive("buttonScontoCassaCalcolo");
oabApriCalcolo.setOnClick("javascript:openWindow(window,'OA.jsp?page=/scm/oracle/apps/asn/rappvendita/webui/TestPG&retainAM=Y','Sconto',{width:'800',height:'600',toolbar:'yes',titlebar:'yes'},true,'dialog',null);");
The window opens correctly, but the page content shows this error:
You are trying to access a page that is no longer active.
- The referring page may have come from a previous session. Please select Home to proceed. All Framework Pages should have a Function defined on the page when MAC Lite is enabled and the URL MAC Check fails.
What is MAC Lite?

Open application windows in the same place consistently

Hello,
I am hoping to find out if anyone knows of a good way to convince application windows to open in the same location on the screen every time, consistently. This is, clearly, a minor problem, but perhaps you know how to do it. For example, I tend to use Safari with the window open over the entire screen, but every time I open a new window it locates itself with a couple mm between left side of the screen and left side of the Safari window, and the right side of the Safari window (the scroll bar) is partially off the screen (because the window is shifted). So every time I open a new Safari window I have to click the top bar and drag it a little bit to place it where I want it. Is there a way to "teach" Safari where I want it to open so that it will open in the same place every time? Maybe the problem is that I have a hidden dock on the left side of the screen and Safari does not want to come too close to the dock?
(I also have the same issue with Mail, because though I use that program with the application window only open over part of the total screen area it always opens in the same place on the screen which is always slightly off from where I want it to be)
Any suggestions? Thanks!!
PS I apologize if this has been posted before; I tried several searches but the only results that came up were not at all related to my actual question.

I don’t think there is a way to teach Safari not to shift the window when a new one is created. And I don’t think it is related to the position of the Dock.
I leave a few cm of space on the right side of the Safari window and have the screen filled from top to bottom with the Safari window. Then when I make a new window, it opens shifted a little to the right of the previous window, but it doesn’t put the scroll bar off the screen and because the screen is filled from top to bottom, it doesn’t shift down, just right next to the previous window.
You might try using tabs. When you click a link that you want in a new window, hold the Command key down. It will open in a new tab in the same window and you can change between the window tabs by clicking on it on the top of the window. The X on the tab will close the tab.

Open Application in the New Window.

Hello Techie's,
I need some clarification with respect to open an application from the INDEX page.
We are in CRM 2007, And I have created a new component "ZDictionary"and which has the view and the main window.
I configured "ZDictionary" component which will opened through the link "Dictionary Maintenance" in Navgation bar pofile config.
I configured Index page in my IC_AGENT profile which will show me the link "Dictionary Maintenance" onclick on that link, it will open the application with view there in the component "ZDictionary".
But I want the application to be opened in the new window rather opening in the same window.
Can anyone help me on this.
Regards,
Santosh

That problem is caused by McAfee Site Advisor
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode

Put my macbook pro to sleep. When I opened it, the desktop window is small and I can't resize it. All applications now run in the smaller size window. Can't make it fill the screen. Just switched from windows. Thank you.

Put my macbook pro to sleep. When I opened it, the desktop window is small and I can't resize it. All applications now run in the smaller size window. Can't make it fill the screen. Just switched from windows. Thank you.

Check to see if the resolution has been changed in System Preferences.
Allan

How do I fix that I accidentally dragged the safari application ( an open window I was on and tryed to drag it to repositions) into an Iweb icon on the side bar, now when I open Iweb it says cannot open /applications/safari.app" ..

I had a safari window open, I went to drag it up on to the destop more but my finger slipped and it dropped into the icon on side bar iWeb that I had been working on. now My iWeb app says "cannot open /application/safari.app" . Ihave already tryed to drag the iWeb to trash and reinstall the applications cd. also, since tryng to figure it out via posts oon apple support that seemed similar ( finding in library and under listing etc )
also.. the tool bar is huge and so I am afraid I have screwed this computer up...

Try following.
First (force) quit Safari, iWeb and all other open applications.
Drag iWeb to the Trash, empty the trash. Restart mac. Recover iWeb from Time Mache backup before you made the mistake.

How to get links from other applications to open a new Firefox window

I have non-Web browser applications that want to open browser windows. I have Firefox as my default Web browser. When these other applications pass a URL to Windows, Windows passes the URL to Firefox. Unless there are no Firefox windows running, Firefox then opens the URL in a new tab of the most recently used Firefox window. I would prefer that Firefox open a completely new window. Where can I find the setting for this behavior?
Thank you,
Dan

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
See also:
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
*http://kb.mozillazine.org/Preferences_not_saved

Planning application url is always opened in the same window?

hi all,
we hava a problem about sts's planning application url.
no matter what url is entered,all the planning application url is always opened in the same window.and the old opened url is covered by the new url.
Is there any solution about this? Can this url be opened in seprate window?
Thank you!
Best Regards,
ma

Hello
I would like to know one thing before answring the question how did you link with an url with the label based menu.
Did you used the opendocument syntax or what did you used.
Another method is why donf you use the URL button and map according to your requirement. place the url button on the menu item and change the properties to tranperancy to 0%.
Thanks
Santhosh V
Edited by: Santhosh Vudarla on Nov 19, 2010 12:05 PM

HT4796 I just downloaded the Windows Migrator and tryed to open it. A window popped up saying "YOU CANT OPEN THE APPLICATION BECAUSE MICROSOFT APPLICATIONS ARE NOT SUPPORTED ON OS X". How do i transfer my file?

I just downloaded the Windows Migrator and tryed to open it. A window popped up saying "YOU CANT OPEN THE APPLICATION BECAUSE MICROSOFT APPLICATIONS ARE NOT SUPPORTED ON OS X". How do i transfer my files?

An .exe application is compiled for Windows. It will not run on a different OS. If you need to run this program, then you will have to install Windows on your Mac. Either as a separate bootable partition, or running in a virtual machine, such as Parallels or VMWare.

I can't open application "Setup EXE" because Microsoft Windows applications are not supported on OS X.

I can't open application "Setup Exe" because Microsoft Windows applications are not supported on OS X! How do I install Windows software?

Sorry I misinformed you this is update bundle, if you already have Office installe, you can search Amazon for Micrsoft Office for Mac, sorry for the error,
Check here:
http://www.amazon.com/Office-Mac-Home-Student-2011/dp/B0064PFB9U/ref=sr_1_1?ie=U TF8&qid=1387734396&sr=8-1&keywords=microsoft+office+mac+download
Also check around you may find better pricing, I included tis for an example.

How to restrict "Open Applications" window from showing C drive? Or use the Windows Explorer "Open" Window?

Hi, Im new to JDeveloper and I work in a school which requires restriction of the C: Drive. Does any one know how I can either stop the "Open Applications" dialog from showing this drive or Use the Windows Explorer "Open" dialog window to browse files, the drive has been hidden and restricted using GPO but JDeveloper shows the C: drive?
Any help is much appreciated.

Hi and thanks Timo. We are using 12c. On the Windows side of things, we are using Win7 and we have hidden the drives we don't want the user to see using GPO but obviously Jdev then shows these drives in its "Open Applications" Window and allows access. As far as the environmental variable is concerned this is something that I put in place.
Many thanks for your reply and the link to the tech doc.
Nigel

I accidentally pressed "Return" key and it opened around 100 finder windows. Now it won't close and when I right click on finder tab it says application not responding.

I accidentally pressed "Return" key and it opened around 100 finder windows. Now it won't close and when I right click on finder tab it says application not responding.

Iv'e tried that but that won't work either. Help please.

Firefox will not open, a pop up window message says: The application or dll mozilla firefox xul.dll is not a valid windows image. I am using XP and firefox use to work perfectly

Firefox will not open a pop up window says "the application or dll c:program files mozilla firefox xul. dll is not a valid windows range"
== This happened ==
Every time Firefox opened
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; Trident/4.0; GTB0.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; .NET4.0C)

I resolved the problem. I went to CNet and re-downloaded the upgrade. It proceeded as intended and the upgrade is installed and running with no loss of plug-ins, bookmarks, etc.

Open application in LV window

Similar Messages

Maybe you are looking for