Open Balance on Sales Order Cost Report

Hi SAP Group -
I have a couple questions about the settlement of manufacturing variance to COPA.
When our settlement process is complete (production order and sales order both settled to COPA), there is a balance remaining on the sales order cost report which is equal to the manufacturing variance on the production order.
It seems that the manufacturing variance is posting from the production order to the sales order, but is not being assigned to the PSEG and flowing to COPA.
I am looking for advice in two areas:
First, how do we "clear" these balances on old orders that are already settled?
Second, how do we prevent this from happening on future orders?
Thanks !!!

Refer to OSS 183250 and note 186485.
If you dont specify in the settlement profile for the production order that the variances are not transferred from the production order into CO-PA, you will settle the variances to <b>CO-PA twice</b>: once from the production order (broken down into variance categories), and once from the sales order item. The settlement rule still references the material and not the sales order item.
Special Features of Product Cost by Sales Order with Valuated Sales Order Stock
<a href="http://help.sap.com/erp2005_ehp_02/helpdata/en/90/ba66cc446711d189420000e829fbbd/content.htm">Read the topic on 'Special Features of Product Cost by Sales Order with Valuated Sales Order Stock'</a>
You may want to check the period of the variance settlement from mfg order to sales order and ensure the settlement of sales order is also done the same period, if the type is PER.

Similar Messages

Plan value(break up) not appearing in sales order cost report

hi
I have done sales order bom in cs61,operation in ca01,in va02 for sales order costing in itemization showing like
material 100
actity 10
total 110
saved and if I see in cost report it show only revenue , cogs(110),but it is not show raw materials and operations.
please advise me what to do?
Thanks and Regards,
Nagesh

Dear Nagesh,
Probably, you need to check the status of the BOM and the Routing in the Header. It should be active/released.
Kind Regards
Umapathi G
Edited by: Umapathi Naidu G on Aug 11, 2011 3:26 PM

Sales order Cost- Report

Hi,
I have an issue in MCTG. For some sales offices the value of Orders: Cost is showing as zero and for some sales offices the report is showing value.
Why is it so?Any known reasons?
Also is there any standard report which will show sales orders cost per sales organisation for a particular period?
Regards,
Ajit

Hi Rajkumar,
Analyse the report and read the documentation. It is not possible for sap also to give all in one report.
Regards,
Madhu.

Open Sales Balance on Sales order

Hi SAP Group -
I have a couple questions about the settlement of manufacturing variance to COPA.
When our settlement process is complete (production order and sales order both settled to COPA), there is a balance remaining on the sales order cost report which is equal to the manufacturing variance on the production order.
It seems that the manufacturing variance is posting from the production order to the sales order, but is not being assigned to the PSEG and flowing to COPA.
I am looking for advice in two areas:
First, how do we "clear" these balances on old orders that are already settled?
Second, how do we prevent this from happening on future orders?

Refer to OSS 183250 and note 186485.
If you dont specify in the settlement profile for the production order that the variances are not transferred from the production order into CO-PA, you will settle the variances to <b>CO-PA twice</b>: once from the production order (broken down into variance categories), and once from the sales order item. The settlement rule still references the material and not the sales order item.
Special Features of Product Cost by Sales Order with Valuated Sales Order Stock
<a href="http://help.sap.com/erp2005_ehp_02/helpdata/en/90/ba66cc446711d189420000e829fbbd/content.htm">Read the topic on 'Special Features of Product Cost by Sales Order with Valuated Sales Order Stock'</a>
You may want to check the period of the variance settlement from mfg order to sales order and ensure the settlement of sales order is also done the same period, if the type is PER.

Standard reports for Sale Order costing

Hi all
Can anybody Please tell sale Order costing reports.
Thanks
Sandeep

for doing mass sales order costing use CK55
or for individually in VA02 -->Extra --> costing.
& for report use KKAC.
rgds
Arpit.
Edited by: Arpit Shah on Jan 1, 2008 2:34 PM

Sales order costing - Z-report without going to sales order/quotation

Dear All,
Currently we are arriving the pricing thru sales order costing. After doing the sales order costing in sales order / Quotation, the costing value flow to condition type EK01. Now management has decided that, to go for manual price and put it in z-table. From z-table system will pick and show in sales order / quotation.
Now management want to compare the sales order costing price as well as z-table price. They need z-report.
They will put the material, plant, pricing date and costing variants in the initial screen. then after execution of this report, they should able to see sales order costing price and z-table price.
They do not want to do the sales order costing thru sales order/quotation.
Now the problem here is I do not know how to do the sales order costing without going thru sales order/quotation. Please provide the FM, or related table for this report.
Waiting for you reply.
Regards,
Niranjan

Hi
Check the table KONV, with respect to VBAK-KNUMV. the table KONV keeps the record of all the Condition type of a documet and KNUMV no is a unique no. generated by the sytem for avery document.
Hope it will help.
Regards
AA

Sales order cost estimate with GIT account

Hi,
Business introduced Goods - in - Transit (Balance sheet account), so PGI will always post to GIT and Invoice it will get reversed.
For one of the Configuratble material (MTO) scenario we need the Sales order cost estimate to get the Planned cost.
When i try to execute the sales order cost estimate it says cost element doesnot exist for GIT GL (WHich is right).
But with maintaining the GIT how to achieve the sales order cost estimate.
I tried to create CE category 90 for GIT, in Cost estimate am getting error CE 90 not supported for Cost estimate.
Kindly help this is kind of urgent req for us
Thanks,
Sudha

Hello Ashley
Yes, if you have done your settings correctly, especially Requirements class set up (see the documentation link), then the cost estimate will flow to a condition type in Pricing, usually EK01/EK02 conditions. These conditions are used to calculate sales prices (PR00) in cost-plus (mark-up) scenarios.
Link: http://help.sap.com/erp2005_ehp_04/helpdata/EN/90/ba6da4446711d189420000e829fbbd/frameset.htm
However Profit margin as calculated in a sales order comes from VPRS condition (which is based in Material Master) and is the difference of net value and VPRS condition value in normal circumstance.
Hope other more knowledgeable experts will weigh in.

Sales order cost estimate

hi,
While saving the sales order cost estimate its getting the GL account from GBB-ZG0.
as we assigned Balance sheet account its asking the cost element.
can you please explain what is link to get the gl from GBB-ZGO, can we change this to pick from GBB-VBR.
Thanks,
Sudha

Hi,
Are you are working with unvaluated special stock ? In this case, the system is looking for a consumption account via the account assignment category. For example if you are using requirement class ZPJ which uses account assignment category Q. In account assignment Q, you entered account modification VBR. Therefore, the system is looking for an account via the keys GBB / VBR.
regards
Waman

Sales order cost estimate not happening because of GIT B/S account

Hi,
Requirement is to have Goods in Transit account in PGI and reverse it in Invoice no issues iwth it.
For the same sales order user wants to get cost using sales order cost estimate.
When i run that am getting following error
Item 00001 : Cost element 14001212 does not exist in CO area 0010 for 10/07/2011
Message no. KK689
Even though i maintain the CE for Balance sheet account with Cost element category 90 its not accpeting.
Can you please help me on how to proceed for sales order cost estimate.
Thanks,
sudha

hi,
if you give a balance sheet account in obyc , you will not be able to create a cost elementin category 01 , accordignly system will give error in sales order costing , as its not able to get correct cost element in cost planning.
if your requirement is just to post cogs to a balance sheet account which is goods in transit and when invoice is done cogs to be posted.
you should actually use revenue based RA functionality on sales order instead of assinging a balance sheet account in obyc.
in this approach;
- first assign a p/l account in obyc and create cost element in cateogry 01.
- create revenue based RA and assign RA key in requirement class.
- in OKG8 for RA category WIPR and your ra key assign , goods in transit account and give a offsetting account which is not cost element (credit entry in offsetting account nullify debit in account given in OBYC when GIT is posted , when billing is done system will automatically post a oppsite entry in both account).
-in OKG8 for RA category COSR give the COGS account and a offsetting account without cost element (credit entry in offsetting account nullify debit in account given in OBYC when COGS is posted).
regards
rajesh

Inventory Valuation based on Sales Order Costing

Dear All
My client requirement is the inventory value should happen based on the "Sales Order Cost Estimate"
Kindly give the configuration steps, if it is possible in SAP
Regards
Anilkumar

Hi rback59,
The information you have provided is very clear and accurate. Thank you. I am hoping that you can assist with a related problem I am facing:
We have sales order costing in place with the Material Ledger and multiple valuation. For financial reporting purposes, we have a legal valuation/local currency variant entered in our requirements class (46) and we are using this to value our sales order stock. The problem we are facing is that the requirements class allows us to enter only one costing variant. This means we are not able to create a cost estimate for our two additional valuation views (group and profit centre). As a result, we are forced to use the material standard price in the material master for the group and profit centre views which is not ideal.
Do you know if there is a way to create cost estimates in all 3 valuation views for a single sales order line item?
Any pointers would be appreciated.
Thanks,
Ross

Non Valuated - Sales order costing

Hello All,
We are planning to use Non Valuated - Sales order costing for our client. My understanding is as follows :-
1. Production order is automatically created from Sales order created (for ex item 010 - Material X) : Production order 1
2. Sub- production order is also created if there is material Y , in the BoM of Material X & needs production : Production order 2 (linked to Production order 1).
3. When GR is done on any on these production orders - no FI entry is posted.
4. On settlement value of Production order 2 is settled in Production order 1.
5. Further Production order 1 value is flow to Sales order line item 010
6. Revenue is generated from Sales order for this item, when Invoice is posted. Still not COGS for delivery.
7. And only on settlement of this Sales order : FI posting is done for COGS.
Please let me know whether my understanding is correct point wise. Thanks
Now I have few questions to clarify, in above example :-
1. Generally these are new product (Material X) hence no standard cost is available for them. When does the cost estimate happens in such scenario. Is it when the first GR of material will happen ? When do I start see this cost estimate in Sales order.
2. Till the time Production order 2 & 1 are not settled ... Do we see WIP at the production order level when we run WIP calcualtion for production orders ?
3. What about the variances ? I have read variance calculation is not possible. Can you please elaborate why & what is avilable other than that ?
Thanks in advance for reading a long query

Hi Rajeshwari
1. If you use ABC - Then COGS split wont be available
2. Main diff between Valuated and Non val stock - Is once you produce and till you sell, the stock will appear in your balance sheet....
Non Val shud be chosen whe you make a material completely customized to the needs of a customer and the time lag between mfg and sale is very less....
If above two are not the case, then stock must be non valuated
3. Implementing the same template or introducing Val Sales order stock depends on the business needs.... The criteria to decide shud be based on (2) above
Also, if the new business where you are implementing now is the same as the existing business which is using non valuated stock, then you shud stick to the same template
4. Sales order cost estimate gets created during creation of SO, using the costing variant specified in req class... Not created during GR
5. Sales order costing does not make sense during Non Val Stock.... Unit Costing or prel costing you use during val Stock
Unit costing means you dont want to maintain a BOM... And you specify the components during sales order costing
6. I dont think you can settle prod order 2 to SDI.. You can try to change the settlement rule... In my opinion, you can not do it
Regards
Ajay M

Sales Order Costing WITHOUT COPA

Hi Gurus/Experts,
I have to work in a make-to-order scenario. But in this case, the COPA shall not be configured. Kindly let me know, if Sales Order Costing is possible without COPA. If it is possible, can you kindly guide me the configuration process?
Thanks and Regards,
Amit

Hi
Sale order costing is very much possilbe w/o COPA.. you will have to decide from where you would derive your profitability reports
Normally, you settle SO to COPA and derive reports from there... In absence of COPA, decide where you would settle the sale order to, say, an internal order or so....
For Config, you can search this forum or refer base line configuration docs in help.sap.com
Ajay M

Purchasing condition for sales order costing

I am trying to add a condition to a purchasing document calculation schema that retrieves the sales order cost for a configurable material. I am using account assignment of M for this purchase order and have tried several settings in a conditin type. But no cost is ever found. Has anyone ever tried this?

Hi Arpit,
1. Go to t-code SWO1.
2. Click Settings -> Delegate.
3. Delegate the BO YBUS2032 to the BO BUS2032.
In workflow perform the following steps:
1. Go to t-code SWDD and open your workflow template.
2. Go to Basic Data (cap sign button at the top of the screen) or click Ctrl + F8
3. Go to Start Events tab.
4. In the Object type enter your BO name BUS2032 (not YBUS2032), in Event of object enter the BO event.
5. Click on 'B' i.e. Binding Defined, click on generate automatic binding. It would automatically generate the appropriate binding for the workflow. You can also alter the binding as per requirement.
6. Click on 'C' i.e. Start Condition. A dialog would open, select the appropriate start condition for the workflow. Use the attribute that you created and make the start condition. Check the condition before saving (recommended).
6. Click on 'A' to Activate the binding and start condition. All 'A', 'B' and 'C' would get green.
7. Save the changes made and activate your workflow.
Hope this helps!
Regards,
Saumya

Sales order costing release not possible due to Goods in transti account

Hi,
Business introduced Goods - in - Transit (Balance sheet account), so PGI will always post to GIT and Invoice it will get reversed.
For one of the Configuratble material (MTO) scenario we need the Sales order cost estimate to get the Planned cost.
When i try to execute the sales order cost estimate it says cost element doesnot exist for GIT GL (WHich is right).
But with maintaining the GIT how to achieve the sales order cost estimate.
Can you please help me in this regards.
Thanks,
Sudha

Hi Ajay,
I have created GIT (B/S) account with CE category 90.
but in sales order cost estimate getting message " inconsistancy in CE category" CE category 90 is not accetable it should be either 01/02
can you please help to move forward on sales order cost estimate with GIT account
Thanks,
sudha

Sale Order Status Report

Dear Expert.
I want Sales Order Status report as below mentioned format required quarry base report from Date to To Date.
Location-OrderSeries-OrderNo-CardCode-CardName-ItemCode-Item Descripotion-Inv.UOM-Order Qty-Allocated Qty-DeliverQty-Peniding Qty adn Pending Order Value.

Hi,
You can check this :
select t3.location as 'Location',t0.series as 'Order Series',
t0.docnum as 'Order No.',t0.cardcode as 'Business Partner Code',
t0.cardname as 'Business Partner Name', t1.itemcode as 'Item',
t1.dscription as 'Item Name', t2.invntryUom as 'Inventory UoM',t1.quantity as 'Order Qty',
t1.QtyToship as 'Allocated Qty- Qty to Ship', t1.delivrdQty as 'Delivered Qty',
t1.OrderedQty as 'Ordered Qty', t1.openCreQty as 'Pending Qty',
t1.Opensum as 'Pending Order Row Value'
from ORDR t0 inner join RDR1 t1 on t1.docentry = t0.docentry
inner join OITM t2 on t2.itemcode = t1.itemcode
inner join OLCT t3 on t3.code = t1.loccode
where t0.docdate >= '2011.01.01' and t0.docdate <= '2011.12.31'
Hope it helps.
Kind Regards,
Jitin
SAP Business One Forum Team

Open Balance on Sales Order Cost Report

Similar Messages

Maybe you are looking for