Open c won't turn on

my zte open c died today. Battery was 1/3, and i plugged it into car charger, and it went blank, and is now unresponsive in every way, its not "bricked" it is a brick.
i had the zte open for about 5months and it went the same way, except in that case the battery went flat, and the phone refused to charge or wake up.
Mozilla, ZTE SUCKS. sorry, i had high hopes, but this is bullshit.
and i spent all last Friday/Sat, learning how to install andoid with gapps, so i could use audible,
and it worked awesome for the week (except for camera didn't work) and of course the sound went weeks earlier.
Guess i'll get a Samsung, privacy doesn't matter much in australia now anyway,
oh the question, for wat its worth, any chances theres something to be done to reset or fix this brick, besides throwing it at a wall. err?
i'd appreciate my money back, though i doubt i'll get it, or a phone that effn works for more than, oh i don't know, a yr might be nice, maybe two......

HI darthlotus,
I understand the frustration since the phone will not turn on. The testing we can do here in the forum are limited and if we do not succeed, please contact the place of purchase for the device to check out the hardware warranty.
#Let the phone charge on a charger, other than the car charger for a bit, do you see the battery on the screen after leaving it on the charger for at least half an hour to an hour?
#Have you replaced the battery since it went flat?
#After a charge, see if you can adb devices to see if it detects the driver.
#Are you using the factory image on the device, if you can get a charge you can flash the phone if there are any issues with the operating system: [http://www.ztedevices.com/support/smart_phone/cba40ed6-d3ab-44c0-bdee-3a15803dc187.html]
Hope this helps.

Similar Messages

  • Moved cd player to diff.shelf w/o removing discs,now door won't open,table won't turn,light flashes

    Relocated without removing discs from large CD player,now door won't open, table won't turn and the light inside in center of table just flashes. Any suggestions as to can I fix this?

    Follow the procedure below to troubleshoot this issue.
    Turn off the disc player.
    Unplug the power cord from the AC outlet.
    Ensure nothing is blocking the tray from opening or closing.
    Let the disc player remain without power for approximately one minute.
    Plug the power cord back into the AC outlet.
    Turn on the disc player.
    Attempt to open or close the disc drawer or tray.
    If the issue is not resolved after completing all of the troubleshooting steps, service will be required . 
    If my post answers your question, please mark it as "Accept as Solution"

  • TS1741 Remote app on my iOS devices control my apple tv, but won't turn my newest gen apple tv on when i open the app.

    Remote app on my iOS devices control my apple tv, but won't turn my newest gen apple tv on when i open the app. It used to turn my previous gen apple tv on. Remote app controls apple tv just fine once i turn it on with the provided remote control. Help?

    Hello CournteyGould3,
    Congratulations on your new Apple TV!  I found an article with steps you can take when your remote app can't connect to the Apple TV.  I recommend following the steps in the article below (you can skip any steps you have already taken):
    Remote app for iPhone, iPad, or iPod touch can't connect to iTunes or Apple TV
    http://support.apple.com/kb/TS1741
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • As i turned on my iphone 4s on and connected to a wireless internet a page opened from the app firewall ip and i usually choose all connections. so it got stuck i held the standy by button but it won't turn off. so i held the standyby and home buttons.

    As i turned on my iphone 4s on and connected to a wireless internet a page opened from the app firewall ip and i usually choose all connections. so it got stuck i held the standy by button but it won't turn off. so i held the standyby and home buttons. when it opened all apps music and pics where not there. why? then i enterted photos and the loading logo appeared then the standyby appeared and i entered my password and everything in my iphone was there but thing were scattered and apps wheren't in folders everything was messed up but no photos or music AND IT SAYS UP IN THE MIDDLE OF THE SCREEN EXIT SAFE MODE. so i restarted it again and it opened and nothing was there and again i entered photos and the samething happen again. why did this happen? and can i get my data back? and in the usage it says that these thing are there but not showing.

    stevejobsfan0123 wrote:
    The Find my iPhone service option is given to you when you first set up the device. If you just reset it, you may have been given that option. So, in other words, the service may have been enabled even if you didn't realize it. You can then go to www.icloud.com and click on Find my iPhone, and have it play a sound. Or, you can use the Find my iPhone app on your mom's iPhone, but the service would still need to be turned on on your iPod.
    Unlike Compukid said, Apple will not assist in locating a lost device without the Find my iPhone service.
    I found that out 2 years ago, it's just that I thought Apple might have changed that.

  • I reseted all contents and settings from my ipad and now it won't turn on, i get the apple logo but it won't open at all, help plz

    I reset all contents and settings on my ipad and it won't turn on, when i try to open it the apple logo appears and then nothing happens

    Hi how did you resolve this problem

  • Tried to open my old MacBook.  Couldn't remember password.  Followed suggestion to reinstall hardware.  Now startup disk is stuck in computer and it won't turn on.  I keep getting a message saying I need to restart the computer.  Any ideas?

    Tried to open my old MacBook.  Couldn't remember password.  Followed suggestion to reinstall hardware.  Now startup disk is stuck in computer and it won't turn on.  I keep getting a message saying I need to restart the computer.  When I hold down power button, I get the same message over and over.  Any ideas?

    Hello m.goo, and a warm welcome to the forums!
    To eject the Disc, hold the Mouse button down, (or what passes for it on a Laptop), while powering up, if you also hold the Option key down at the same time it should eject & give you a chance to insert your install disc & wait for it to shw as a Boot option.
    "Try Disk Utility
    1. Insert the Tiger Mac OS X Install disc , then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, *you must select your language first.)*
    *Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
    3. Click the First Aid tab.
    4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
    5. Select your Mac OS X volume.
    6. Click Repair. Disk Utility checks and repairs the disk."
    Then Safe Boot , (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it finishes.
    If it appears to be time for An Archive & Install, which gives you a new OS, but can preserve all your files, APPs, pics, music, settings, etc., as long as you have plenty of free disk space...
    http://docs.info.apple.com/article.html?artnum=107120
    Be sure to use Preserve Users & Settings.
    To check if AppleCare applies, AppleCare Products Overview...
    http://www.apple.com/support/applecare/overview/

  • N95 light won't turn off when slide open

    I just find this, in rare occasions the backlight won't turn off and auto keylock not fuction(s/w) when the slide is open, but the phone is too shy to do it again after reboot, this is definitely a bug to me. It is a N95-1 with V21.0.016 f/w.
    Message Edited by lotech on 14-Oct-2008 12:38 PM

    I'm having this problem too :/ Help.
    Mine is n95 8gb with the most recent firmware.
    Message Edited by pyradev on 12-Jul-2009 02:31 PM
    Message Edited by pyradev on 12-Jul-2009 02:32 PM

  • GX740 monitor won't turn on when lid is opened and weird HDD specs?

    This is the second GX740 I have received after returning the first one due to a defective hard drive.
    I have changed all the power options so that closing the lid does nothing except switch off the lid. However, when I close the lid and reopen it, the screen won't turn back on. The system itself is still on and working though (ie. cpu running, harddrives running) but its just the screen that won't turn on. The only thing I can do is hit the on/off button, which I have set to go to sleep. The funny thing is that when I hit the on/off button again and bring the pc out of sleep mode, the screen will start functioning normally (ie. when I close it and reopen it, the screen will turn on) but if I switch it off or restart it, then the monitor will not turn on when the lid is closed and opened again.
    Also another very strange thing I noticed is that although my harddrive is a 320gb 7200rpm WD drive, the model number in Device manager is WD6400BEVT - which I'm guessing is the number for the 640gb drive?! This hasn't caused any problems so far but it seems very odd to me and I am just wary of complications in the future as I returned the first GX740 I got due to a defective harddrive
    Also, I have updated windows 7 completely.
    Any ideas?

    Please consider taking a look at this faq article: http://support.msi.eu/faq/index.php?sid=446722&lang=en&action=artikel&cat=188&id=115&artlang=en
    It does seem the same issue and for that you should update the graphic drivers and VBIOS. You can find them here: http://www.msi.com/index.php?func=searchresult&keywords=GX740&table=download
    Vbios is under Firmare and VGA drivers under Drivers.
    Good luck.

  • 2007 Macbook Pro - Won't turn off or on. Power on button only results in quickly flashing power-on button on front of computer by display open latch. Turn off by disconnecting power cord and removing battery. Help!

    2007 Macbook Pro OS X Maverick with maxed out processor and hard drive. It's been running beautifully for years! - When shutting down the computer failed to turn off. Now it won't turn off or on. Powering on only results in quickly flashing power-on button on front of computer by display open latch. To turn off by disconnecting power cord and removing battery. Help!

    Hi P S 13,
    If your MacBook Pro will not power on as you describe, I would suggest you troubleshoot using the steps in this article -
    Troubleshooting: My computer won't turn on
    http://support.apple.com/kb/TS1367
    Thanks for using Apple Support Communities.
    Best,
    Brett L

  • When i was at my soccer game i realized that someone opened a bottle of gatorade and poured it all over my iPod touch 5th gen. it had a whole in the upper right side and thats were the gatorade went in. it won't turn on but heats up if i try to charge it

    when i was at my soccer game i realized that someone opened a bottle of gatorade and poured it all over my iPod touch 5th gen. it had a whole in the upper right side and thats were the gatorade went in. it won't turn on, but heats up if i try to charge it. i put it in a  bag of ice for about a 3weeks.Still wont turn on.WHAT CAN I DO? PLEASE HELP

    Unless you have the AppleCare+  extended warranty,
    Apple will exchange your iPod for a refurbished one for $99 for 16 GB 5G and $19 for the other 5Gs. They do not fix yours.
      Apple - iPod Repair price                             
    With AppleCae+, the exchange cost is $29.
    Taking the iPod apart means that Apple will not longer exchange i.

  • My new ipod classic 160 gb powered off and won't turn back on. if i plug in to computer, itunes will not open. if i start itunes first then plug in ipod, itunes freezes up. Looking for help. thanks

    my new ipod classic 160 gb powered off and won't turn back on. if i plug in to computer, itunes will not open. if i start itunes first then plug in ipod, itunes freezes up. Looking for help. thanks. Was not connected to the computer when ipod died.

    I have not heard of a good reason for this to happen or how to fix. 3 days later my screen lights up and says to connect to charger.... so its back "for now". Best music player on the market when it works.

  • IPad Air won't turn on after opening the smart case

    iPad Air won't turn on after opening the smart case cover, it does not do it all the time but enough to concern me

    Take both the iPad and the Smart Cover back to where you bought them for an evaluation. Make an appointment at an Apple Store to have your device examined by a technician. Or contact Apple Support.

  • Mac book frozen, won't turn off or restart.  I don't have any programs open.

    First thing this morning my computer is frozen, it won't turn off or restart.  I don't have any programs open.

    Thanks, that didn't work a few minutes ago but it did this time.  I guess it just needed a few minutes.  Problem solved.  Thanks again!

  • HT1338 My iPhoto won't open, the 'dial' keeps turning & turning.  What do I do?

    My iPhoto won't open, the 'dial' keeps turning & turning.  What do I do?

    If the rebuild doesn't help try the following:
    1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
         User/Home/Library/ Preferences folder.
    2 - delete iPhoto's cache file, Cache.db, that is located in your
    User/Home/Library/Caches/com.apple.iPhoto folder (Snow Leopard and Earlier).
    or with Lion and Mt. Lion from the User/Library/Containers/com.apple.iPhoto/
    Data/Library/Caches/com.apple.iPhoto folder
    3 - launch iPhoto and try again.
    NOTE:  In Lion and Mountain Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
    OT

  • [Help]iPhone 5s screen won't turn on / won't play sounds

    Hello, my name is Bryan.
    I've got a problem with my iPhone 5s. I opened my iPhone to fix an issue with the home button (Watched a guide on youtube on how to achieve this), and I connected everything as it is supposed to go, my home button is working but now my screen won't turn on or the phone won't play any sounds. I know the phone it's on because I can connect it to the computer and the computer recognizes it. Also, I tried calling it, and it rings on the phone I am calling from, but my iPhone simply won't play any sounds...
    I am also sure the phone is not in DFU mode.
    Any help?
    Thanks in advance,
    - Bryan

    It won't even vibrate or do anything, but it's on.

Maybe you are looking for

  • Oracle ifs and BEA weblogic

    Oracle ifs and BEA weblogic We have one application server with weblogic and and ifs 1.0.9 , and one db server with Oracle 8.1.7. with the following configuration: Web server appl server with weblogic 6.0 and ifs 1.1.9 Oracle 8i Enterprise with inter

  • How to seprate clob in dofferent variables?

    how to seprate clob in dofferent variables?

  • Adding Music to a slideshow in Premiere Elements 4

    I am new to media software. I have some experience with editing photos in Photoshop Elements 4. Since that program was unable to make slideshows that played on a TV, I purchased the new bundle with Photoshop Elements 6 and Premiere Elements 4. I have

  • How to recall the mail which i sent

    ''locking this thread as duplicate, please continue at [https://support.mozilla.org/en-US/questions/1046430 /questions/1046430]'' how to recall the mail which i sent ?

  • Asked to restart computer after grey screen

    While using my Imac with Lion a grey screen came down from the top of the screen and asked me to restart my computer. Happened once befor and said somethign about a Kernnel?