Open data set for reading excel file on application server in back ground

open data set for reading excel file on application server in back ground

hi Vijay,
I am afraid you won't be able to read from Excel file on Appl. Server.
ec

Similar Messages

  • Error while reading excel file from application server into internal table.

    Hi experts,
    My requirement is to read an excel file from application server into internal table.
    Hence I have created an excel file fm_test_excel.xls in desktop and uploaded to app server using CG3Z tcode (as BIN file type).
    Now in my program I have used :
    OPEN DATASET v_filename FOR INPUT IN text mode encoding default.
    DO.
    READ DATASET v_filename INTO wa_tab.
    The statement OPEN DATASET works fine but I get a dump (conversion code page error) at READ DATASET statement.
    Error details:
    A character set conversion is not possible.
    At the conversion of a text from codepage '4110' to codepage '4103':
    - a character was found that cannot be displayed in one of the two
    codepages;
    - or it was detected that this conversion is not supported
    The running ABAP program 'Y_READ_FILE' had to be terminated as the conversion
    would have produced incorrect data.
    The number of characters that could not be displayed (and therefore not
    be converted), is 445. If this number is 0, the second error case, as
    mentioned above, has occurred.
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_CONVERSION_CODEPAGE', was not
    caught and
    therefore caused a runtime error.
    The reason for the exception is:
    Characters are always displayed in only a certain codepage. Many
    codepages only define a limited set of characters. If a text from a
    codepage should be converted into another codepage, and if this text
    contains characters that are not defined in one of the two codepages, a
    conversion error occurs.
    Moreover, a conversion error can occur if one of the needed codepages
    '4110' or '4103' is not known to the system.
    If the conversion error occurred at read or write of  screen, the file
    name was '/usr/sap/read_files/fm_test_excel.xls'. (further information about
    the file: "X 549 16896rw-rw----201105170908082011051707480320110517074803")
    Also let me know whether this is the proper way of reading excel file from app server, if not please suggest an alternative .
    Regards,
    Karthik

    Hi,
    Try to use OPEN DATASET v_filename FOR INPUT IN BINARY mode encoding default. instead of OPEN DATASET v_filename FOR INPUT IN text mode encoding default.
    As I think you are uploading the file in BIN format to Application server and trying to open text file.
    Regards,
    Umang Mehta

  • Read Excel File on Application Server to Internal Table

    Hi Everybody!
    Can anyone tell me how I can Read in an Excel File from the Application Server?
    I'm familiar with the OPEN DATASET Statement and I already use it to read in text files.
    Important is, that it works in the Batch / can be used as a background job
    I already tried using
    CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
    which did not work.
    Can anybody please help me`?
    I created the file I try to read out from the Application Server Folder with the Standard upload
    in ABAP Web Dynpro and Wrote it to the Server with the following code. Does anyone know
    if maybe already the writing is to the application server is wrong?
    try.
          convt = cl_abap_conv_in_ce=>create(
            input = lv_filedata
            encoding = 'UTF-8'
            replacement = '?'
            ignore_cerr = abap_true ).
          convt->read( importing data = s_cont ).
        catch cx_sy_conversion_codepage.
          wd_comp_controller->show_error( exporting
            text = 'There occurred an error during conversioning the code page.' type = 'E' ).
      endtry.
        open dataset XLSFILEPATH for output in binary mode.
        transfer s_cont TO XLSFILEPATH.
        close dataset XLSFILEPATH.
    Best Regards and Thanks,
    Steffen

    Hi Suhan,
    I tried the following, but the output in the table doesn't look good at all
    Can you please help?
    OUTPUT:
    ??#u0871#?################>###??##############################=#######????########???????????????????????????????????????????????????????????????????????????????????????????????????????
    ####################################################################################### ###!###"#######$###%###&###'###(###)###*###+###,###-###.###/###0###1###2###3###4###5###6###7#
    #?######Z##A#r#i#a#l###3########,#####0#\# #"#? "#;#\#-###,#####0#\# #"#? "###=########,#####0#\# #"#? "#;#[#R#e#d#]#\#-###,#####0#\# #"#? "###?########,#####0#.#0#0#\# #"#? "#;#\#-
    ###?? ##?########? ?#######?? ##?########? ?#######?? ##?#P######? ?#######?? ##?#P######? ?#######?? ##?# ######? ?#######?? #################A#?#?j}#(#}############################
    ##########?########}#?#}#############*##################_#? _#-########????#,#####0########????#? _#-#;########????#"#?#?#\########????#_#-#@#_
    #######????########}#(#}#############+##################_#? _#-}#(#}#############,##################_#? _#-}#(#}#############-##################_#? _#-}#(#}#############.###########
    ##########?########}#<#}#############6#############?}#?#_#? _#-########??#?#,#####0}#<#}#############7#############?e#?#_#? _#-########????#,#####0}#?#}#############8###############
    #######????########}#?#}#############9#############????#_#? _#-########????#,#####0########????#? _#-#;########????#"#?#?#\########????#_#-#@#_
    #######????########}#(#}#############:##################_#? _#-}#-#}#############;##################_#? _#-#####}#P#}#############<##################_#? _#-#############,#####0#####
    ##Check Cell?#z#?##############?
    #C#h#e#c#k# #C#e#l#l##########?##????########????#####?##????#######?##????#######?##????#######?##????##?###+?#??# #?##############?##C#o#m#m#a#####?###,?#??#(#?##############?##C#
    #5####Input?#p#?##############?##I#n#p#u#t##########?##?u0319?#####?##??v?#####?#####?#######?#####?#######?#####?#######?#####?##?###6####Linked Cell?#F#?##############?##L#i#n#k#e#d#
    ?##N#o#t#e##########?##????#####?##????#######?##????#######?##????#######?##????##?###9####Output?#r#?##############?##O#u#t#p#u#t##########?##????#####?##????#####?##????#######?#
    #;####Title?#1#?##############?##T#i#t#l#e##############I}?%####?#
    #<####Total?#H#?##############?##T#o#t#a#l################?########O???##########O???##?###=####Warning Text?#:#?##############?##W#a#r#n#i#n#g# #T#e#x#t##########?##?##??#X#?######
    ##Commission###Health Incentive ###Housing Norm###Hypo Tax###Hypo Tax- Special Wages###Paid Time Off(##Vision Insurance- Withheld from Employee###Working Spouse/DP surcharge)##TX St
    ###########?#?#?######### #########c###?3###N##?h##?t##nu############d#################????MbP?_#####*#####+#####?#####?###########%#####?#?###?#########?#####?#####&###ffffff??'###
    #I#######}########+######}#######$
    ######}#######m###############c###################?###################?###################?###################?###################?###################?###################?##########
    CODING:
    types: begin of st_excel_parse,
              clientno type string,
              fileid type string,
              paymtreportingid type string,
              name type string,
              employee_id  type string,
              home_country type string,
              host_country  type string,
              actstartdt  type string,
              actenddt type string,
              assignment_status type string,
              paymttypenm  type string,
              paymtcategorynm  type string,
              paymtdt  type string,
              transeffdt  type string,
              amount  type string,
              currency_code type string,
      end of st_excel_parse.
      data: ls_excel_parse type st_excel_parse,
            lt_excel_parse type table of st_excel_parse.
      data l_wa_raw_data type string.
      open dataset gv_str_filename for input in text mode encoding default.
      if sy-subrc = 0.
        do.
          read dataset gv_str_filename into l_wa_raw_data.
          if sy-subrc = 0.
            "Split the file record using <TAB> and store inside the work area
            split l_wa_raw_data at cl_abap_char_utilities=>horizontal_tab into :
              ls_excel_parse-clientno
              ls_excel_parse-fileid
              ls_excel_parse-paymtreportingid
              ls_excel_parse-name
              ls_excel_parse-employee_id
              ls_excel_parse-home_country
              ls_excel_parse-host_country
              ls_excel_parse-actstartdt
              ls_excel_parse-actenddt
              ls_excel_parse-assignment_status
              ls_excel_parse-paymttypenm
              ls_excel_parse-paymtcategorynm
              ls_excel_parse-paymtdt
              ls_excel_parse-transeffdt
              ls_excel_parse-amount
              ls_excel_parse-currency_code .
            append ls_excel_parse to lt_excel_parse.
          endif.
        enddo.
      endif.

  • Read excel file in application server to internal table

    Hi,
    I have an excel file located in some folder in my application server. I don't have excel installed in the server. Now I want to read the excel file data into an internal table. I tried to use READ DATASET, but it returned junk characters.
    I have searched SDN extensively for this, but without any succesful answer.
    Regards,
    Arun.

    Hi Arun,
    Please check the code below for your reference.
    TABLES:eket.
    TYPE-POOLS truxs.
    DATA it_truxs(4056) TYPE c OCCURS 0.
    DATA:v_dt(2),filename TYPE string,
    i_temp TYPE truxs_t_text_data.
    DATA:BEGIN OF it_eket OCCURS 0,
    ebeln LIKE eket-ebeln,
    ebelp LIKE eket-ebelp,
    etenr LIKE eket-etenr,
    eindt LIKE eket-eindt,
    END OF it_eket.
    PARAMETERS: p_path TYPE rlgrap-filename.
    SELECTION-SCREEN : PUSHBUTTON /2(10) pb_but1 USER-COMMAND get.
    PARAMETERS:p_no TYPE i.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_path.
      CALL FUNCTION 'F4_FILENAME'
        EXPORTING
          program_name  = sy-cprog
          dynpro_number = sy-dynnr
        IMPORTING
          file_name     = p_path.
    START-OF-SELECTION.
      REFRESH :it_eket,i_temp,it_truxs.
      filename = p_path.
      CALL FUNCTION 'GUI_UPLOAD'
      EXPORTING
      filename = filename
      filetype = 'ASC'
    * has_field_separator = 'X'
      TABLES
      data_tab = i_temp.
      CALL FUNCTION 'TEXT_CONVERT_XLS_TO_SAP'
        EXPORTING
          i_field_seperator    = 'X'
          i_tab_raw_data       = i_temp
          i_filename           = p_path
        TABLES
          i_tab_converted_data = it_eket
        EXCEPTIONS
          conversion_failed    = 1
          OTHERS               = 2.
      SORT it_eket BY ebeln.
      DELETE ADJACENT DUPLICATES FROM it_eket COMPARING ebeln.

  • Java API for reading Excel Files.

    Hi,
    Can you please suggest me any api for reading excel files.
    Right now i am using jxl.jar for this purpose but i am searching for an open source java api better than this.
    Whether POI gives better than this ?
    Thanks,
    Amit Shah.

    Can you please suggest me any api for reading excel
    files.
    Right now i am using jxl.jar for this purpose
    but i am searching for an open source java api better
    than this.
    Whether POI gives better than this ?i don't know about jxl but poi has several features which an excel can contain and it has been vastly improved in the past few versions.

  • Customised module for reading Excel files.

    Hi Gurus,
    I have to develop a customsed java module for reading Excel files from PI. I downloaded NWDS 7.31 from following location NWDS Download links - Java Development - SCN Wiki. I have installed it on my local laptop. For developing the module I need following Jar files.
    com.sap.aii.af.ms.svc_api
    com.sap.aii.proxy.svc_api.jar
    com.sap.aii.sec.svc_api.jar
    com.sap.aii.utilxi.server.jar
    com.sap.aii.utilxi.core.jar
    com.sap.xi.mapping.tool.lib_api.jar
    sap.com~tc~bl~txmanagerimpl~plb~impl.jar
    sap.com~tc~je~appcontect_api~API.jar
    com.sap.aii.af.cpa.svc.api
    com.sap.aii.af.lib.mod
    com.sap.aii.af.ms.ifc_api
    com.sap.aii.af.svc_api
    com.sap.xpi.ib.mapping.lib
    1. Where can i get these jar files. I checked these files in my downloaded NWDS 7.31  package, but cold not find them.
    Thanks in advance

    Hi.
    Check this thread.
    Where to get the libraries for XI development - Process Integration - SCN Wiki
    Regards
    Lucho

  • What are the commands available to read a file from application server and

    What are the commands available to read a file from application server and store the file into an internal table?

    Hi,
    To read a file from an Application Server to an Object there is a command in ABAP called <b>READ DATASET</b>. After that file is transported to that object you have to do a loop and put that data in an Internal Table.
    This statement exports data from the file specified in dset into the data object dobj. For dobj, variables with elementary data types and flat structures can be specified. In Unicode programs, dobj must be character-type if the file was opened as a text file.
    For dset, a character-type data object is expected - that is, an object that contains the platform-specific name of the file. The content is read from the file starting from the current file pointer. After the data transfer, the file pointer is positioned after the section that was read. Using the MAXIMUM LENGTH addition, the number of characters or bytes to be read from the file can be limited. Using ACTUAL LENGTH, the number of characters or bytes actually used can be determined.
    In a Unicode program, the file must be opened with an arbitrary access type; otherwise, an exception that cannot be handled will be triggered.
    If the file has not yet been opened in anon-Unicode program, it will be implicitly opened as a binary file for read access using the statement
    OPEN DATASET dset FOR INPUT IN BINARY MODE.
    . If a non-existing file is accessed, an exception that can be handled can be triggered.
    Influence of Access Type
    Files can be read independently of the access type. Whether data can be read or not depends solely on the position of the file pointer. If the latter is at the end of the file or after the file, no data can be read and sy-subrc will be set to 4.
    Influence of the Storage Type
    The import function will take place irrespective of the storage type in which the file was opened with the statement OPEN DATASET.
    If the file was opened as a text file or as a legacy text file, the data is normally read from the current position of the file pointer to the next end-of-line marking, and the file pointer is positioned after the end-of-line marking. If the data object dobj is too short for the number of read characters, the superfluous characters and bytes are cut off. If it is longer, it will be filled with blanks to the right.
    If the file was opened as a binary file or as a legacy-binary file, as much data is read that fits into the data object dobj. If the data object dobj is longer than the number of exported characters, it is filled with hexadecimal 0 on the right.
    If the specified storage type makes conversion necessary, this is executed before the assignment to the data object dobj. Afterwards, the read data is placed, byte by byte, into the data object.
    System Fields
    sy-subrc Meaning
    0 Data was read without reaching end of file.
    4 Data was read and the end of the file was reached or there was an attempt to read after the end of the file.
    Thanks,
    Samantak.
    <b>Rewards points for useful answers.</b>

  • Create Excel file in application server but the field value is incorrect

    Hi Experts,
    i am facing a problem when create excel file in application server using OPEN DATASET command.
    the internal table have 4 field and one of those field contains 19 digit number --> ICCID.
    the code running well, successfully create EXCELfile in application server but the problem is SAP only copy exactly first 15 digit numeric only and the rest became zero 0
    Example :
    the field value in internal table is 8962118800000447654 but when i opened in the excel file the value became 8962118800000440000.
    and if i add alphabet like a8962118800000447654 then it is correct.
    is there is anything wrong with my code?
    here is my code
    CONSTANTS: c_tab TYPE abap_char1 VALUE cl_abap_char_utilities=>horizontal_tab. "Tab Char
    Data : begin of lt_zdsdmmdt00005 occurs 0,
             SERNR (18) type c,
             MSISDNl(20) type c,
             BOX1 (20) type c,
             ICCID(30) type c,
           end of lt_zdsdmmdt00005.
    data : ld_temp(100) type c.
    i_file = '/usr/sap/DM/test_excel.xls'.
    open dataset i_file for output in legacy text mode.
      loop at lt_zdsdmmdt00005.
        move lt_zdsdmmdt00005-ICCID to ld_iccid .
        concatenate lt_zdsdmmdt00005-sernr  lt_zdsdmmdt00005-MSISDN  lt_zdsdmmdt00005-BOX1 ld_iccid
        into ld_temp separated by c_tab.
        transfer ld_temp to i_file.
      endloop.
      close dataset i_file.
    Best Regard,
    Akbar.

    Hi Naveen,
    thanks for your reply,
    i already tried and the result still the same. any idea?
    Best Regard,
    Akbar.

  • Uploading Excel File in application server

    Hi,
    I am uploading data from internal table to excel file in application server.I am using Open dataset to put in appln server.(background job).But the problem is it is not sitting in different colums,all data goes to single column.I want every field in separate columns.Please suggest to proceed.

    Hi,
    save the internal table as a desktop file and then use CG3Z transaction to put the data from desktop to application server.
    then to read the application file use the logic given below:
    DATA: wa_file_data TYPE text4096,
    lv_app_server_file TYPE string.
      lv_app_server_file = pa_afile.
    To read file from Application server
      OPEN DATASET lv_app_server_file FOR INPUT IN TEXT MODE ENCODING DEFAULT.
      DO.
        READ DATASET lv_app_server_file INTO wa_file_data.
        IF sy-subrc = 0.
          APPEND wa_file_data TO gi_file_data.
        ELSE.
          EXIT.
        ENDIF.
      ENDDO.
      CLOSE DATASET lv_app_server_file.
    DATA: lv_file_separator TYPE c.
      lv_file_separator = cl_abap_char_utilities=>horizontal_tab.
    To upload file in other formats(CSV, Tab delimited etc)
      CALL FUNCTION 'TEXT_CONVERT_TEX_TO_SAP'
        EXPORTING
          i_field_seperator    = lv_file_separator
          i_tab_raw_data       = gi_file_data
        TABLES
          i_tab_converted_data = gi_zhralcon_file
        EXCEPTIONS
          conversion_failed    = 1
          OTHERS               = 2.
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
    Hope it helps.
    Regards,
    Rajesh Kumar

  • Regarding Reading the file from Application Server

    Hi,
    I am trying to read data from Application Server but due to special characters it is getting dumped out.
    US24,Q,Acero (Carbon),AA,0010,0001,01,Ver Mir para dimension#
    US24,Q,Acero (Carbon),AA,0010,0002,01,Area rectificada sin da#os ra
    US24,Q,Acero (Carbon),AA,0010,0003,01,Ver Mir para dimension#
    US24,Q,Acero (Carbon),CD,0010,0001,01,ITPE Soken para verificacion
    US24,Q,Acero (Carbon),CD,0010,0010,01,No se permite desprendimiento
    US24,Q,Acero (Carbon),CD,0010,0002,01,"Vernier, cinta metrica"#
    In the last line it is going into dump due to special character ".
    Please suggest.
    Thanks
    Priyanka.

    Hi,
    You can check the mode in which you are reading the file
    from application server that is
    Open Dataset in Binary or Text Mode.
    Hope it helps
    Regards
    Mansi

  • FM to read XML files from Application server in ECC5.0

    Hi All,
    We need to pick up an XML file from Application server/FTP server. The requirement is to parse the XML file and process it to create material master. SAP provides standard function modules to read XML files.
    Now we need to read the XML file contents of MM01 and upload into SAP Data Base through BAPI
    I need to know about the Function modules to read XML files from Application Server and also about the FM's that will update the Date base tables with the data obtained form XML files.
    Regards
    Prathima

    Parsing XML data:
    http://help.sap.com/saphelp_nw04/helpdata/en/86/8280ba12d511d5991b00508b6b8b11/frameset.htm
    or alternatively check out ABAP online help for "CALL TRANSFORMATION".
    For creating the material master look at BAPI_STANDARDMATERIAL_CREATE.
    Thomas

  • Downloading internal table in excel file on application server

    Hi,
        I am trying to download ITAB into excel file on my application server . I am using FM 'SAP_CONVERT_TO_XLS_FORMAT' for that .
        When I run the report I can see file getting generated on APP server but no ITAB data is saved in that excel.
        After debugging I found that error code  'SAVE_DOCUMENT_FAILED'  is retuned in above FM.
        Could any one please suggest how to go about this?
    Regards,
    Ganesh

    Hi ganesh,
    Please have a look into the below link
    [Link1|How to Upload Excel file to Application Server]
    [Link2|Error in Downloading the Text file on Application Server]
    Hope this will be Helpful
    Thanks
    Kalyan

  • Function module to read xml files from application server

    Hi experts,
            I need to read  xml files from application server to sap. Is the any siutable function moldule for that?

    Hi Cenosure,
    Donno about FM which will upload data directly to SAP, I think you have to do some mapping for it so that it will suit the SAP format. Again it depends on your requirement..
    Please elaborate more about your requirement.
    Please have a look on below FM
    TEXT_CONVERT_XML_TO_SAP
    Also search on SCN there are many threads on the same topic available.
    http://abapreports.blogspot.com/2008/09/upload-xml-file-from-application-server.html
    This is the link which will give you the Code
    http://www.geocities.com/rmtiwari/Resources/MySolutions/Dev/Codes/Report/Z_RMTIWARI_XML_TO_ABAP_46C.html
    Use this XML file to Upload the same, this Program will work for your XML file also,
    http://www.geocities.com/rmtiwari/Resources/MySolutions/Dev/Codes/Report/input_xml.xml
    See the below thread also
    Upload XML to internal table and vice versa in SAP 4.6C
    Hope it will solve your problem..
    Thanks & Regards
    ilesh 24x7
    ilesh Nandaniya

  • Reading XML file from application server and  put into internal table-4.6C

    Dear All,
    Is there any way of reading XML file from application server to SAP? I am using 4.6C. Function module SCMS_STRING_TO_XSTRING function module is not available. Please suggest.
    Thanks and regards,
    Atanu

    Hi Atanu!
    Simply use the XSLT transformation 'ID'.
    FIELD-SYMBOLS <ls_result> TYPE ANY.
    CREATE DATA lref_data TYPE (your_structure).
    ASSIGN lref_data->* TO <ls_result>.
    CALL TRANSFORMATION id
                        SOURCE XML xmlstr
                        RESULT result = <ls_result>.
    "xmlstr" contains your XML file. Just read it into it via standard I/O operations. "<ls_result>" will contain your DDIC formatted content.
    Best regards
    Torsten

  • Not recognizing # while reading the file from application server

    Hi
    I am reading a file from application server. While reading into internal table with read statement the last field in each record is filling with hash symbol in the last digit. If I write any if condition with HASH symbol its not going inside the if condition, means its not recognizing as hash may be its internally treating as some other. I need to remove the hash from that field. How I can do that.
    Thanks,
    kishore

    I faced exact situation. Yes, internally its treated as some other special character. What i did was, becuase hash symbol was always coming at the end...i created a dummy field in my internal table so that it will not interfere with my actual data. When i see the data in my internal table, the hash always falls in the last field (dummy) which i will ignore. I could not get solution to remove this hash so i adopted this approach and it worked!!
    Hope it helps,
    SKJ

Maybe you are looking for

  • I can't see my shared external HDD from my Macbook

    I have a Mac Pro on 10.5.8 that has an External HDD connected to it. It mounts and works properly. I went to 'System Preferences/Sharing/File Sharing' and shared many internal drives as well as the external HDD. Users for the shares are: My local use

  • I want to record a vinyl record directly to my iPad from my USB turntable

    I just bought a new turntable and I have many old vinyl records. Can I record these records directly to my iPad Air? The turntable has a USB output. I could the audio files into my computer but I prefer to do it directly to the iPad if possible.

  • Frm-92101 when try to run the test form

    dear all, i have just install OAS 10g rel 2 on windows 2003 server when i try to call http://apps10 - where apps10 is the server name - welocme sreen get ok when i try to access a test form http://apps10/forms/frmservlet?form=test.fmx i got frm error

  • Disable eefects in after  effects cs6

    who can enable  effects  in after effects  cs6?all are disable!

  • IMessage doesn't deliver photos to certain contacts

    My friend and I both have iPhone 5's running iOS7. We can send and receive imessages just fine (blue quote bubbles) but when I send a photo it fails to deliver. This even happens in group chats where the I and the other people can see the photos but


HashFlare