Open doc url question

Hi,
I have a requirement wherein I need to access some reports using the URL.
I need to test the reports which open through a url as it needs to get embedded to the intranet.
When I run the below url thorugh the browser I get the following error
http://dev1/businessobjects/enterprise115/InfoView/scripts/opendocument.aspx?sType=wid&sDocName=fru%loop%report
An erorr has occured. Not a valid query
Please let me know on this.
Thank You,

Are you able to open and refresh the report in the InfoView?
Do you have multiple reports with the same name in your BO repository?
Regards,
Stratos

Similar Messages

Open Doc URL with parameter in BI 4.0 to open Webi and Crystal report

Hi Experts ,
Has any one experienced the open doc URL to open the report and to pass the parameter to the new report .
I am well aware of the syntax of passing the parameter and use to work perfectly fine with XI 3.1 but its giving me griefs in BI 4.0 environment .
In the new report i am just trying to pass the Fiscal year as a parameter with the url i can open the report but it does not accept the value being passed with the url so i have to renter the values again .
I am using BO 4.0 SP2 Patch 6 and trying to intact with crystal and webi report built on top of BEx query with the fiscal year parameter defined in BEx query level .
Any comment on this will be appreciated.
Thanks,
Vibhav

Hi Nakul,
I am not using the user response to get the value i tested it in Crystal Enterprise environment i tired passing the following syntax
http://.../OpenDocument/opendoc/openDocument.jsp?sIDType=CUID&iDocID=...&lsSFiscal%Year%(Single%Value%Entry,%Required)={?0P_FYEAR}
{?0P_FYEAR} this is a variable comming form BEx query into Crystal i tired to use it and pass it to other report but i cannot pass it i have tried to pass the hardcoded value still i see the paramater screen and have to enter the value again.
I am not sure if anyone has tested this functionality in BI 4.0 environment .
Thanks,
Vibhav

Open doc URL: unable to open the report in same window

Hi
I'm trying to open a report using open doc url with "swindow=same" but still it opens in a separate window. This happens only when I use JAVA viewer. it works fine in ActiveX and HTML but I want this in JAVA viewer as i'm including this page in my JAVA application and it should open the report in the same window. I tried using "<a>URL</a>" and also target="_self" by HTML interpretation for that object but still the same problem. I'm unable to open the report in the same window by using JAVA viewer for Crystal Reports in info view. Please help me!!!
Envirorment Details: Crystal Reports 2008 SP3, BOE XI R3 SP3
regards
Raghavendra.G

I have tested that myself and It seems that HTML interpretation does not work with the Java viewer.
I have also tried using a hyperlink containing javascript
eg.
javascript:window.location.href='http://www.sap.com'
but the java viewer seems always to launch a new window before processing the command.
I would recommend to open a case by SAP support ( httP://service.sap.com/support )
Regards,
Stratos

How to pass # (Not Assigned) in open doc url ??

I am unable to pass # (Not Assigned) in open doc URL. I am also try %23 ( encoded form of #) but it show MDX error and when i supply directly # then my WebI report pull all the data i.e. my filter doesn't work. Please give me some way to pass # in opendoc..

http://boseimdev60:8080/OpenDocument/opendoc/openDocument.jsp?iDocID=AQgEkeXDfo5PpR_IFC.rse0&sIDType=CUID&sType=wid&sRefresh=Y&mode=full&sRefresh=Y&lsSCalendarYear%2fMonthTo=032010&lsSCalendarYear%2fMonthFrom=032010&lsSInfoprovider (Multiple Required)=ZPUR_C15&lsSPlant(SelectionOptions%2cOptional)From=&lsSPlant(SelectionOptions%2cOptional)To=&lsSPur Doc Category (Optional)=K&lsSPlant=%23
Here Plant=%23 i.e. in last i increase this prompt in WebI level so its work.

One parameter in open-doc url in webi not required

Hi,
I am using SAP BO4.0.I have made one open doc URL which links one report to another.While linking there is one extra parameter which have been added, means the linking in the first report is done for a prompt that is not present in the second report.Still, the linking works properly with the correct parameters being passed and I can navigate from one report to another.So I have come to a conclusion that if the prompt is not present in the second report that prompt is ignored in the first report(on which linking to the second report is present). Has anyone come across such a situation.
I hope I have made myself clear.

Hi Riddhi ,
That is purely depend on requirement.If you want to pass any parameter from master to sub report , then put prompt on Sub report and pass the value from Master.You can ignore the prompts.
In 4.0 we have option to leave the prompts to "default" in links.

Passing report filter function in Open Doc URL

Hi All,
I have a requirement that the values entered in the input control on one report the same values should be passed to another report.For this I created a document linking from the first report to the second and passed ReportFilter([name of the object]) for that prompt on which I have applied input control.When we navigate from one report to another via the hyperlink we get a error saying that internet explorer have modified this page to help prevent cross site scripting.We realized that this is due to the ReportFilter function passed by us in the Open Doc linking because when we do not pass ReportFilter() function the link works properly.Any other method to capture the values entered in the Input control.
I hope I have made myself clear.
Thanks in advance.

Hi,
Yes both the reports are based on the same universe.I tried storing the values of the input control to a variable.But that too is giving me that cross site scripting error.I cannot add a second tab to the existing report and want it through OPEN DOC URL itself.
Please help.

Open Doc Function to pass parameters from Xcelsius to WEBI

Hi All,
I need to have a drill through functionality from xcelsius report to WebI report I am using the following open doc URL
http://BO ServerName/OpenDocument/opendoc/openDocument.jsp?
sType=wid&sRefresh=Y&sIDType=CUID&iDocID="Doc ID"&mode=full&lsSRegion=""&lsSDay=""&lsSPlant=""&lsSProduct%20Name=""
When I run the flash in Internet Explorer then the drill through webi report opens without any error for the 1st time
but when I try to reopen the report again with new set of parameters , the browser gets hanged
Also when I run the flash in Firefox , I get error while opening the Webi Report for the 1st time but when I try to open the report again it works fine.
Please let me know if anyone has faced similar issue before.
I am Using Xcelsius 2008 SP3 and BO XI 3.1
Thanks,
Shweta

Hi Shweta
If you place the URL un the browser directly does the report open and refresh ok? Can you try altering the parameters of the URL, also directly in the browser?
Something else to check would be if the prompts in the WebI report can be optional, store the last value etc, and I wouldn't recommend having a prompt which has a space in the name such as you have (Product%20Name). Keep the prompts as simple as possible, and make sure that the 'equal to' and 'in list' operators are properly reflected in the URL.
Regards
Charles

Passing hierachy node variable from BW to BO Webi Report in open doc link

Hello All,
We are working on BW-BO integration and creating Webi reports based on Bex queries.
The question is regarding passing of a hierachy node value from BW to BO through open doc link.
I see that when we pass hierarchy node value, we have to associate that with the corresponding infoobject technical name in the link but not sure in what format it has to be sent.
For example, if ARM is the node value and 0HIERNODE is the infoobject , how should we send this value to BO.
Please help.
Thanks for your help,
Regards,
Tangudu S

You cannot change anything here. You should really find out how the values are retrieved from the database
THere is another option:
1) Activate the tracing on your BOBJ server
Check the following SAP notes (http://service.sap.com/notes) for that:
Unix: Note 1235111
Windows: Note 1260004
2) Run your WebI report from the InfoView by choosing first the desired hierachy node value from the LOV of your prompt.
3) Extract the MDX statement from the log file. It should contain the value for the hierarchy node. Copy this to the URL
It is easier to find this out if you have access to a Crystal Reports Designer installation. Do you?
Regards,
Stratos

Var xhr = new XMLHttpRequest(); xhr.open("POST", url,false); working in chrome but not in mozilla 5.0 i am get error "[Exception... " no message " nsresult"

while uploading a file i am getting below error
[Exception... "<no message>" nsresult: "0x805e0006 (<unknown>)" location: "JS frame :<TOP_LEVEL> :: line 80" data: no]
but the same works in chrome
here is the java script code
var xhr = new XMLHttpRequest();
xhr.open("POST", url,false);

HI johibkhan.
I think you have to update Firefox the call you are using needs 12 or higher:
"Gecko 12.0 (Firefox 12.0 / Thunderbird 12.0 / SeaMonkey 2.9) and later support using XMLHttpRequest to read from data: URLs."
[https://developer.mozilla.org/en-US/docs/Web/API/XMLHttpRequest]
But also keep in mind we have developers dedicated to answering questions like this in the Firefox section of stackoverflow.com as well :-) You might get a faster/more accurate response.

Open Doc - & in Child report prompts issue

Hi,
I am opening a child report using open doc function. This works fine but if there is no LOV in Child report with ampersend (&)
="<a href=\"http://server/XI/opendoc/openDocument.jsp?sType=wid&iDocID=7544&sWindow=Same&lsSSelectBusinessGroup:="[vTeam]"&lsSSelectOrgLevel01:="[Current].[Org Level 03]"&sRefresh=Y\">"[Current].[Org Level 03]+"</a>"
If valuue of [Current].[Org Level 03] has value eg: 'R&D' the child report is selecting only upto 'R' excluding '&D'. Because of this no data is seen.
Can anyone help?

Hi,
This is because of the character &.
You need to enclose the value in double quotes. Use Char(34) while forming the url.
="<a href=http://server:port/opendoc/openDocument.jsp?sType=wid&iDocID=7544&lsSSelect+Business+Group:="+[vTeam]+"&lsSSelect+Org+Level+01:="+Char(34)+[Current.Org Level 03]+Char(34)+"&sRefresh=Y>"+[Current.Org Level 03]+"</a>"
Also you can try replacing & with
&
in the url using Replace function.
If
&
does not work, then try
%26
Regards

How to open text URL in the new tab

Hi guys,
We know that when we click on a hyperlink it will directly open the linked web site, e.g.
www.bing.com
But sometimes we may find some URL in plain text that we couldn't click on it, e.g. www.bing.com
I'll have to select the URL and copy&paste it to a new tab to open it, this is time wasting.
The time IE 9 came out, I found a wonderful add-on, Open URL in New Tab (with Preview)
This will do the trick to open the text URL in the new tab by right click on it.
http://www.iegallery.com/us/addons/detail.aspx?id=3614
But I don't like two things of it.
1st, it will try to preview the web site when I using it which is undesired.
2nd, it will open the link through another site and then jump back to the link I need to open. But I'd like to open the link directly. Which will open the link more quickly also save my time.
Questions:
Is there any other way to open the plain text URL directly? I mean without copy and past it to another page.
It would be great if I can open the URL by dragging it like the other...

Is there any other way to open the plain text URL directly? I mean without copy and past it to another page.
In these forums? If you are using the NNTP Bridge you could view your message in your News reader's Plain text mode and then see that your two examples worked equivalently.   <eg>
Otherwise, in general, I agree there are some pretty obvious "accelerators" which could have been provided.
I suspect much of the problem will be due to "security".   E.g. Windows used to have a functionality called text scraps, where you could select some text and drag and drop it just about anywhere to create a scrap file.   That's
not working for me any more either.   If it were we could at least drag it to the Address bar and press Enter...
http://technet.microsoft.com/en-us/magazine/2008.02.windowsconfidential.aspx
(Microsoft search for
   text scraps
<quote>
virus writers loved this
</quote>
QED

How to open new window webi report using open doc?

Hi All,
i have created URL using open doc in Bi 4.0 .please find the below my code.
http://fcvws975/BOE/OpenDocument/opendoc/openDocument.jsp?iDocID=AeX5DoctKBhGv1AiV2oibxU&sIDType=CUID&sType=BI
workspace&sRefresh=Y" title="" target="_blank" nav="doc"></a>
When i click on this hyper link it is opening in the same page not in new window but i want to see report in new separate window.
Can any one please help .
Thank you,
Regards,
Venkat

Hi,
In BI4.1 SP03, there are couple openDocument fixes related to workspace.
ADAPT01700442
Description:
When using an Opendocument URL to open a BI workspace, a timeout error occurs resulting in an HTTP 500 error
message that reads: "Your session has expired".
New Behavior:
This problem is resolved.
ADAPT01711393
Description:
In Internet Explorer 8, if you attempt to view an Analysis workspace embedded in the SAP NetWeaver Portal using
OpenDocument, the workspace will fail to load.
New Behavior:
This problem is resolved.
What version of BI4.0 do you have?
If the fixes above are related to your openDocument workspace issue, I'd suggest you to test it on a BI4.1 SP03 sandbox.
Hope this helps,
Jin-Chong

Issue in Passing Value from SAP Portal through Open Doc

Hi
I am trying to pass the variables through open doc link from SAP portal.
I am trying to pass four variables.
OrganisationHierarchy
FiscalPeriodFrom
FiscalPeriodTo
Business
OrganisationHierarchy and Business are hierarchy variables.
I am testing few scenarios.Scenario1 and Scenario 2 are working fine.
But I am facing with Scenario3 and Secnario4.
Scenario1
Only two levels are passed to OrganisationHierarchy
http://mspr39.corp.medtronic.com:8080/OpenDocument/opendoc/openDocument.jsp?sap_sysid=DB1&sap_client=010&iDocID=11589&lsMOrganisationHierarchy=[ZSS_L2_C+++++++++++++++++++++ZSS_L2_SEL].[AUSTRALIA+++++++++++++++++++++0HIER_NODE];[ZSS_L2_C++++++++++++++++++++ZSS_L2_SEL].[INDIA++++++++++++++++++++++++++0HIER_NODE]&sRefresh=Y&lsSFiscalPeriodFrom=001.2010&lsSPreviousWorkingDay=10%2F28%2F2010&lsSTargetCurrency=HKD&lsSFiscalPeriodTo=011.2010
Result: Report is refreshed
Status: Passed
Scenario2
Only two levels are passed to Business
http://mspr39.corp.medtronic.com:8080/OpenDocument/opendoc/openDocument.jsp?sap_sysid=DB1&sap_client=010&iDocID=11589&sRefresh=Y&lsSFiscalPeriodFrom=001.2010&lsSPreviousWorkingDay=10%2F28%2F2010&lsSTargetCurrency=HKD&lsSFiscalPeriodTo=011.2010&lsMBusiness=[0MAT_PLANT__ZBUSINESS++++++++RKEG_WWBUS_0MATPLANT].[ATV+++++++++++++++++++++++++++0HIER_NODE];[0MAT_PLANT__ZBUSINESS+++++++RKEG_WWBUS_0MATPLANT].[TPS++++++++++++++++++++++++++++0HIER_NODE]
Result: Report is refreshed
Status: Passed
Scenario3
When two levels are passed for both OrganisationHierarchy,Business
http://mspr39.corp.medtronic.com:8080/OpenDocument/opendoc/openDocument.jsp?sap_sysid=DB1&sap_client=010&iDocID=11589&lsMOrganisationHierarchy=[ZSS_L2_C+++++++++++++++++++++ZSS_L2_SEL].[AUSTRALIA+++++++++++++++++++++0HIER_NODE];[ZSS_L2_C++++++++++++++++++++ZSS_L2_SEL].[INDIA+++++++++++++++++++++++++0HIER_NODE]&lsRefresh=Y&lsSFiscalPeriodFrom=001.2010&lsSPreviousWorkingDay=10%2F28%2F2010&lsSTargetCurrency=HKD&lsSFiscalPeriodTo=011.2010&lsMBusiness=[0MAT_PLANT__ZBUSINESS+++++++RKEG_WWBUS_0MATPLANT].[ATV++++++++++++++++++++++++++++0HIER_NODE]
Result: Report is never refreshed and its keep on running
Status: Failed
Scenario4
Only three levels are passed for OrganisationHierarchy,
No values are passed for Business
http://mspr39.corp.medtronic.com:8080/OpenDocument/opendoc/openDocument.jsp?sap_sysid=DB1&sap_client=010&iDocID=11589&lsMOrganisationHierarchy=[ZSS_L2_C+++++++++++++++++++++ZSS_L2_SEL].[AUSTRALIA+++++++++++++++++++++0HIER_NODE];[ZSS_L2_C++++++++++++++++++++ZSS_L2_SEL].[INDIA+++++++++++++++++++++++++0HIER_NODE]; [ZSS_L2_C++++++++++++++++++++ZSS_L2_SEL].[ASEAN++++++++++++++++++++++++++0HIER_NODE]&lsRefresh=Y&lsSFiscalPeriodFrom=001.2010&lsSPreviousWorkingDay=10%2F28%2F2010&lsSTargetCurrency=HKD&lsSFiscalPeriodTo=011.2010
Result: Report is never refreshed and its keep on running
Status: Failed
Thanks
Arun

Hello Rupachandran,
the memory id won't work as it is within the current session only.
you have two main options:
1) pass parameters in URL
2) persist the parameters somehow ( shared memory area, database table ) and pass a GUID in the URL which refers to these.
strangely enough although this is a mirror of most of the posts here, which want to launch WDA apps from standard GUI based code, the techniques are very very similar.
you might get some help from looking at this recent post Calling webdypro through R3 Function module

How to open a URL without session ID and reuse the current browser session?

Hi All,
I have a question about HTMLDB 2.0
How to open a URL without session ID and reuse the current browser session?
That was the behaviour in HTMLDB 1.6 ...
My usecase for this is the following:
We have written an issue tracking application, which sends e-mail to the interested users, when something happens.
In these email we've put a link to some page, with some parameters in the URL.
The idea is for the user to be easy to click on the hyperlink and to see the details of the ticket.
When the user clicks on such a link he is directed to a login screen (page 101) and he enters his Username and password, and is then forwarded to the details for the ticket.
Then he receives another email (e.g. for another ticked). He clicks on the link and :
a) in HTMLDB 1.6 he goes to the details as he didn't close his browser and session is remembered
b) in HTMLDB 2.0 he is prompted to enter username, password with the username populated
Please tell me how can I achieve the same behaviour in HTMLDB2.0 as it was in HTMLDB 1.6.
I understand this change is somehow security related, althogh I don't understand how. If you can explain this either I would be very happy?
Best regards,
Mihail Daskalov

Mihail - I detailed a couple of approaches here: Re: Application Link
Scott

Toolbar Button to Open Custom URL for a Business Partner

Hi All,
for a CRM 5.2 implementation, I'm trying to open a URL in a new explorer window when on hte BP Account Overview ( Corporate Account ).
I've created and added the Button, I've created an event, but when I launch the code behind the event to open a new explorer window, this does not work.
I've tried several alternatives already ( see below ), but can't seem to find a working one.
Can someone please helpme out ?
Component BP_HEAD, view BPHEADOverview.
CALL METHOD navigation->GOTO_PAGE
EXPORTING
    URL     = 'http://www.sap.com'
   SESSION =
or
call method cl_gui_frontend_services=>execute
exporting
    application = 'iexplore.exe'
parameter   = 'http://www.sap.com'
exceptions
    others = 1.
or
CALL FUNCTION 'CALL_BROWSER'
    EXPORTING
      URL                          = w_url
    WINDOW_NAME                  = ' '
      NEW_WINDOW                   = 'X'
    BROWSER_TYPE                 =
    CONTEXTSTRING                =
   EXCEPTIONS
     FRONTEND_NOT_SUPPORTED       = 1
     FRONTEND_ERROR               = 2
     PROG_NOT_FOUND               = 3
     NO_BATCH                     = 4
     UNSPECIFIED_ERROR            = 5
     OTHERS                       = 6.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Thanks

Hi,
First of all I would advice you to post this question in the new CRM 2007 forum.
We have created our own button that calls an URL in a separate window. Here is some coding from the method CALLBACK~GET_BUTTONS which may inspirere you:
CONCATENATE 'javascript:window.open'
              lv_http
              '","Print","resizable=yes,height=850,width=700,dependent=yes,status=1");'
         INTO lv_java.
ls_button-type     = cl_thtmlb_util=>gc_icon_print.
ls_button-tooltip = cl_wd_utilities=>get_otr_text_by_alias( 'CRM_UIU_BT_SALES_QUOT/SALESQUOT_PRINT' ).
ls_button-on_client_click = lv_java.
ls_button-page_id = me->component_id.
ls_button-enabled = abap_true.
APPEND ls_button TO rt_buttons.
CLEAR ls_button.
ls_button-text     = cl_wd_utilities=>get_otr_text_by_alias( 'CRM_UIU_BT_SALES_QUOT/SORDER_CREATEFOLLOW-UP' )."#EC NOTEXT
ls_button-tooltip = cl_wd_utilities=>get_otr_text_by_alias( 'CRM_UIU_BT_SALES_QUOT/SORDER_CREATEFOLLOW-UP' )."#EC NOTEXT
ls_button-on_click = 'FOLLOWUP'.                          "#EC NOTEXT
ls_button-page_id = me->component_id.
ls_button-enabled = lv_persistent.
APPEND ls_button TO rt_buttons.
CLEAR ls_button.
/Anders

Open doc url question

Similar Messages

Maybe you are looking for